Installation of Config: All in one best practice

Hi,
I have download the Config: All in one doc from SAP service market place. After extracting what I see is the *.SAR files. can anybody guide how to use and install.
DP

thread closed

Similar Messages

Problem with crystal reports get from All in One Best Practice package

Hi,
I tried to use Financial Statements crystal report download from All in One Best Practice package but encounter the below errors. I followed the guide in Manual Steps for Additional Datasource Creation to set up the additional data source. When i try to preview the report, I tried to set all the value to Null but the error message still appear. I believe this has something to do with the infoset but i not sure how to resolve this. Those report which connect to infoset doesnt seem to work for me.
Errors:
Failed to retrive data from database. (then i press OK)
database connector error: 'no item structure data' (then i press OK)
database connector error: 'RFC_Closed'
Please advice
Thank you

Hi Afzal,
I think you misunderstood. The crystal report i am talking about is the 23 crystal report template i get from All in One Best Practice package. All i need to do is follow the "Quick Guide to impletement SAP Best Practices for Business Intelligence V4.31" to make those template works. For those template that connect to Database type: SAP Table, Cluster or Function, i can make those work. The problem i facing now are those template (example: Financial Statements) that connect to Database type: SAP Info sets. The error i receive are stated in my first post.
Please advice

SAP Business One Best-Practice System Setup and Sizing

<b>SAP Business One Best-Practice System Setup and Sizing</b>
Get recommendations from SAP and hardware specialists on system setup and sizing
SAP Business One is a single, affordable, and easy-to-implement solution that integrates the entire business across financials, sales, customers, and operations. With SAP Business One, small businesses can streamline their operations, get instant and complete information, and accelerate profitable growth. SAP Business One is designed for companies with less than 100 employees, less than $75 million in annual revenue, and between 1 and 30 system users, referred to as the SAP Business One sweet spot. The sweet spot covers various industries and micro-verticals which have different requirements when it comes to the use of SAP Business One.
One of the initial steps during the installation and implementation of SAP Business One is the definition of the system landscape and architecture. Numerous factors affect the system landscape that needs to be created to efficiently run SAP Business One.
The <a href="http://wiki.sdn.sap.com/wiki/display/B1/BestPractiseSystemSetupand+Sizing">SAP Business One Best-Practice System Setup and Sizing Wiki</a> provides recommendations on how to size and configure the system landscape and architecture for SAP Business One based on best practices.

For such high volume licenses, you may contact the SAP Local Product Experts.
You may get their contact info from this site
[https://websmp209.sap-ag.de/~sapidb/011000358700001455542004#India]

Installation Officejet 4335 all-in-one

Since my laptop crashed (Acer Aspire - Vista) I have bought a new one (hp 250 G3 – windows 7). And I therefore want to reinstall my Officejet 4335 all-in-one. I have reinstalled this printer many times on my old laptop using AIO_CDB_Full_Non-Network_enu_NB which I downloaded from your support site and have never had any problems with the installation.
This time the installation doesn’t work... chronicle of events
Attached USB cable to printer/laptop
Got the usual “device is ready for use” notification
Started installation software
Got error message ...
USB Drivers etc.
Checked to see if Printer visible to laptop – it is !!!
Just for devilment, tried to print something – it worked !!!
But still cannot continue installation because of USB error message
Tried cable on all three USB ports – installation software repeats error message
All USB ports work with various devices (including the printer cable to the all in one)
I need to complete the installation as I need the other functions – particularly scanning.
All help appreciated.
Regards
David M. Gullever

Hello there! Welcome to the forums @Dragonfish
I read your post about the issue you're having with installing your Officejet 4335 on your Windows 7 system.
There is most likely issues installing the printer, as it does not have a driver available for Windows 7, which also means there is no scanning software available either.
Check out the drivers available here: HP Officejet 4355 All-in-One Printer Drivers
The best bet you have would be to try the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the printing issue. If printing still does not work, I would suggest a printer upgrade.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Hp psc 2110 all-in-one -best, normal fast lights just flash continually

My hp psc 2110 all-in-one I have had for a number of years and has never let me down before.
The problem started when I tried to print from a PC on my home network. The request was on the queue but wouldn't print and the 3 lights for Best, Normal and Fast Quality just flash continually.
I also keep getting a window come up entitled HP OFFICEJET REFLASH asking for the original setup disk.
I have responded and put the CD in the drive.
I have uninstalled the program and reinstalled a download from HP.com website but still the lights continue to flash.
Can anyone help PLEASE!!!!!
Best regards
The Mole
[email removed for privacy reasons]

My hp psc 2110 all-in-one I have had for a number of years and has never let me down before.
The problem started when I tried to print from a PC on my home network. The request was on the queue but wouldn't print and the 3 lights for Best, Normal and Fast Quality just flash continually.
I also keep getting a window come up entitled HP OFFICEJET REFLASH asking for the original setup disk.
I have responded and put the CD in the drive.
I have uninstalled the program and reinstalled a download from HP.com website but still the lights continue to flash.
Can anyone help PLEASE!!!!!
Best regards
The Mole
[email removed for privacy reasons]

HP Solutions Software Installation (HP C7250 All-in-one) after Upgrading from Windows 8.0 to 8.1

Received errors when trying to open HP Solutions following upgrade to Windows 8.1 (64 bit). Tried re-installing drivers and software. Software downloads but will not install. Print and Scan Doctor says software not installed. Anyone deal with this issue before?

Welcome to the forums Denwood5
I noticed your posts about the issue you are having when you attempt to install your printer on Windows 8.1. I am going to share some suggestions with you.
1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
Try to install
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
How to disable realtime scans
Try the install
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Try the install
I hope my post was helpful, thank you for posting!
Have a great Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Re: SAP Business One Best-Practice System Setup and Sizing

Hi,
I am having very good knowledge in R/3, I want to gain knowledge about business one. So I want to install business one in my laptop and what is the hardware requirement for that? Do you know anybody in Pune, India who can install it for me?
Regards,
Guru

Hi guru,
Sap R/3 and Sap B1 both are different. small example for sap r/3 and sap b1 is windows os is r/3 and ms office is sap b1.
if u want sap b1 in ur laptop. we need two softwares 1 is sql server and 2 is sap b1. If u have two softwares with in 2h u have sap b1 in ur system.
Deva

Error on Cartridge Installation on J6480 All-in-One

I installed new black and color cartridges and now get a message "Cartridge(s) incorrectly installed." This keeps popping up on my screen and I can't shut it off. I can print in both black and color. How can I shut off this message?

1. delete printer icons from Printers and Faxes.
2. unplug USB cable(if wireless, then skip this step)
3. insert installation CD, and select Add A Device.
4. connect the USB cable when prompted, and complete the process.
now onwards, you shouldn't get that msg.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Installation of 7410 all-in-one under Windows10

My PC is wirelessly connected to a rooter. So is the printer. I have upgraded to Windows10. When that was done I could not connect to the printer and not use the scanner. So I tried to set up the printer again. The setup could no be completed because the program did not find the printer. It did not help to write the ip-adress. I tried to remoove the old installation, to restart the PC and then install, but nothing helped. Are there any tricks to make the installation program work?

Hi,An exisitng queue of the printer may prevent the installation, let's try the following steps and let me know if that may help: From the Control Panel select Devices and Printers.Right click any existing queue of your printer and select Remove Device. Right click the background area and select Device Manager, then uninstall any exisitng instance of your printer from the listed categories (e.g. Printers / Imaging Devices) Launch the installation and try installing it again or select Add a Device if the software already installed, then check for any difference. Regards,Shlomi

Error while implementing SAP All in One Retail Package Release V1.605,

Hi All,
While activating the building blocs of SAP All in one Best practices for Retail, Version Release V1.605. We are getting the following error:
1. The add on release installed in ur system is not upto date.
2. A newer version is available, install the latest add-on as described below to avoid issues during the activation of SAP Best Practices version.
Please help.

Hi Gaurav!
I run the command from Note 1576955
$(DIR_PUT)/exe/tp -V 2>&1 and got the result:
I can't see any stdout errors there.
I copied files from
$(DIR_PUT)/bin/libicu* to SYS and DVEBMGS00 according of note 1576955 :
cp /tmp/SUM/SUM/abap/exe/libicu* /usr/sap/EW1/SYS/exe/run/
cp /tmp/SUM/SUM/abap/exe/libicu* /usr/sap/EW1/DVEBMGS00/exe/
But it didn't help.

Best Practice for SAP PI installation to share Data Base server with other

Hi All,
We are going for PI three tire installation but now I need some best practice document for PI installation should share Data base with other Non-SAP Application or not. I never see SAP PI install on Data base server which has other Application sharing. I do not know what is best practice but I am sure sharing data base server with other non-sap application doesnu2019t look good means not clean architecture, so I need some SAP document for best practice to get it approve from management. If somebody has any document link please let me know.
With regards
Sunil

You should not mix different apps into one database.
If you have a standard database license provided by SAP, then this is not allowed. See these sap notes for details:
[581312 - Oracle database: licensing restrictions|https://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm=581312]
[105047 - Support for Oracle functions in the SAP environment|https://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm=105047] -> number 23
23. External data in the SAP database
Must be covered by an acquired database license (Note 581312).
Permitted for administration tools and monitoring tools.
In addition, we do not recommend to use an SAP database with non-SAP software, since this constellation has considerable disadvantages
Regards, Michael

System requirement tp install Utilities Best practices(utilities-V1.500)

Hello All,
We want to install SAP Best Practices for Utilities (UTILITIES - V1.500) in our landscape. I checked the system requirements proposed by SAP and observed that most of the s/w releases they are reffering to are ECC5 (500) and our system is at release ECC6 (600). I beleive that there will be a lot of changes in the config nodes of ECC6 from ECC5. So if we install it in our landscape then will it cause a conflict in configuration? So is it advisable to install Utilities Best Practices in our system? Please find below the system requirement proposed by SAP for installation of best practice and RTD system Configuration. Kindly let me know.
System Requirements proposed by SAP is as follows
Software Component     Release     Support Package     Highest Support     Short Description of Software Component
               Package
SAP_BASIS     640     13     SAPKB64013     SAP Basis Component
SAP_ABA     640     13     SAPKA64013     Cross-Application Component
ST-PI     2005_1_640     2     SAPKITLQH2     SAP Solution Tools Plug-In
PI_BASIS     2004_1_640     10     SAPKIPYI6A     Basis Plug-In (PI_BASIS) 2004_1_640
SAP_BW     350     13     SAPKW35013     SAP_BW 350
SAP_APPL     500     9     SAPKH50009     Logistics and Accounting
SAP_HR     500     11     SAPKE50011     Human Resources
EA-IPPE     300     7     SAPKGPIC07     SAP iPPE 300
EA-APPL     500     9     SAPKGPAC09     SAP R/3 Enterprise PLM, SCM, Financials
EA-DFPS     500     9     SAPKGPDC09     SAP R/3 ENTERPRISE DFPS
EA-FINSERV     500     9     SAPKGPFC09     SAP R/3 Enterprise Financial Services
EA-GLTRADE     500     9     SAPKGPGC09     SAP R/3 Enterprise Global Trade
EA-HR     500     11     SAPKGPHC11     SAP R/3 Enterprise HR Extension
EA-PS     500     9     SAPKGPPC09     SAP R/3 Enterprise Public Services
EA-RETAIL     500     9     SAPKGPRC09     SAP R/3 Enterprise Retail
FINBASIS     500     9     SAPK-30009INFINBASIS     FINBASIS 300 : Add-On Installation Request
SLL-LEG     300     9     SAPK-30009INSAPSLL     SLL-LEG 300_640 : Add-On Installation
CPROJECTS     300_640     8     SAPK-31408INCPROJECT     SAP cProject Suite 3.10 (based on 640)
BI_CONT     353     5     SAPKIBIFP5     BI_CONT 353 : Add-On Delta Upgrade
BP-INSTASS     500V3     0          -     Best Practices Installation Assistant
BP-BLERP     500V6     0          -     Best Practices All-in-One (based on ECC
Our RTD System
Software Component     Release     Support Package     Highest Support     Short Description of Software Component
               Package
SAP_BASIS     701     4     SAPKB70104     SAP Basis Component
SAP_ABA     701     4     SAPKA70104     Cross-Application Component
ST-PI     2005_1_700     6     SAPKITLQI6     SAP Solution Tools Plug-In
PI_BASIS     701     4     SAPK-70104INPIBASIS     Basis Plug-In
SAP_BW     701     4     SAPKW70104     SAP Business Warehouse
SAP_APPL     604     3     SAPKH60403     Logistics and Accounting
SAP_HR     604     11     SAPKE60411     Human Resources
EA-IPPE     400     15     SAPKGPID15     SAP iPPE
EA-APPL     604     3     SAPKH60403     Logistics and Accounting
EA-DFPS     600     13     SAPKGPDD13     SAP Enterprise Extension Defense Forces & Public Security
EA-FINSERV     600     3     SAPKGPFD03     SAP Enterprise Extension Financial Services
EA-GLTRADE     600     5     SAPKGPGD05     SAP Enterprise Extension Global Trade
EA-HR     604     11     SAPK-60411INEAHR     SAP Enterprise Extension HR
EA-PS     600     13     SAPKGPPD13     SAP Enterprise Extension Public Services
EA-RETAIL     600     5     SAPKGPRD05     SAP Enterprise Extension Retail
FINBASIS     600     13     SAPK-60013INFINBASIS     Fin.
Thanks a lot in Advance!
Boby Mathew

Hi ,
Please go with the sequence 4, 1, 2 ,3. This would give you solution manager key for the other systems also.
Rest of the stuff you can get it in the installation guides. http://service.sap.com/instguides
Regards,
Pavan

Best practice for installing many SL-500

Hi,
I have just bought 25 SL-500 and are to buy a hundred more in half a year.
They are all model 2746-4DG
I wish to make a special installation with all standard software of my office and transfer this to a DVD as a Ghost Image.
Normally (in my old job) I would do this by installing everything I need on one PC, and do a sysprep for making a factory image. After this I would make a Ghost image of the disk and transfer this to a DVD.
But in my old job we did not buy OEM windows XP - we had a VOL agreement.
I would really like to install all PC's with only one Windows Key and skip activation, but can this be done if I buy one VOL license and media for Windows XP and use this key on all PC's.
And is it legal for me to do so?
Kind regards
Hchhimself
Denmark

There is one best practice document available from Oracle RACSIG site and "Oracle Real Applicaiton Cluster Administration and Deployment Guide" available on OTN is also good source of informaiton about 10g RAC.
Oracle has made sincere efforts in 10g documentations expecially in server technology.
Thanks & Regards

Slow starup of Java application - best practices for fine tuning JVM?

We are having problems with a java application, which takes a long time to startup.
In order to understand our question we better start with some background info. You will find the question(s) after that.
Background:
The setup is as follows:
In a client-server solution we have a win xp, fat client running java 1.6.0.18.
(Sun JRE). The fat client containt a lot of GUI, and connects to a server for DB access. Client machines are typical 1 to 3 years old (there are problems even on brand new machines). They have the client version of JRE - standard edition installed (Java SE 6 update 10 or better) Pretty much usual stuff so far.
We have done a lot of profiling on the client code, and yes we have found parts of our own Java code that needs improving. we are all over this. Server side seems ok with good response times. So far, we havent found anything about shaky net connections or endless loops in the java client code or similiar.
Still, things are not good. Starting the application takes a long time. too long.
There are many complicating factors, but here is what we think we have observed:
There is a problem with cold vs. varm starts of the application. Apparently, after a reboot of the client PC - things are really, really bad - and it takes (sometimes) up to 30-40 secs to start the application (until we arrive at the start GUI in our app).
If we run our application, close it down, and then restart
without rebooting, things are a lot better. It then usually takes
something like 15 - 20 sec. which is "acceptable". Not good, but acceptable,
Any ideas why?
I have googled it, and some links seems to suggest that the reason could be disk cache. Where vital jar are already in disk cache on th warm start? Does that make any sense? Virus scanners presumable runs in both cases.
People still think that 15 - 20 sec in start up on the warm start is an awful long time, even though there is a lot, a lot, of functionality in the application.
We got a suggestion to use IBMs JRE - as it can do some tricks (not sure what) our SUN JRE cant do concerning the warm and cold start problem. But thats is not an option for us. And noone has come up with any really good suggestions with the SUN JRE so far?
On the Java Quick Starter (JQS) -
improves initial startup time for most java applets and applications.
Which might be helpful? People on the internet seem more interested
in uninstalling the thing than actually installing it though?
And it seems very proprietary, where we cant give our Jar files to it?
We could obviously try to "hide" the problem in some way and make it "seem" quicker. Where perceived performance can be just as good as actual performance. But it does seem a bad solution. So for the cold start we will probably try reading the jar files and thereby have them in disk cache before startup of our application. And see if that helps us.
Still, ok the cold start is the real killer, but warm start isn't exactly wonderfull either.
People have suggested that we read more on the JVM and performance.
java.sun.com.javase/technologies/performance.jsp
java.sun.com.docs/hotspot/gc5.0/gc_tuning_5.html
the use of JVM flags "-Xms" "-Xmx" etc etc.
And here comes the question .. da da ...
Concerning various suggested reading material.
it is very much appreciated - but we will like to ask people here - if it is possibe to get more specific pointers. to where the gold might be buried.
I.e. in a an ideal world we would have time to read and understand all of these documents in depth. However, in this less than ideal world we are also doing a lot of very timeconsuming profiling in our own java code.
E.g. java garbage collection is is a huge subject - and JVm settings also. Sure, in the end we will probably have to do this all very thoroughly. But for now we are hoping for some heuristics on what other people are doing when facing a problem like ours..?
Young generation, large memory pages, garbage collection threads ect. all sounds interesting - but what would you start with?
If you don't have info to decide - what kind of profiling would you be running and then adjust what JVM setting in your trials?
In this pressed for time scenario. Ignorance is not bliss. But makes it hard to pinpoint the or those JVM parameters to adjust. So some good pointers from experienced JVM "configurators" will be much appreciated!
Actually, If we can establish that finetuning of these parameters is a good idea, it will certainly also be much easier to allocate the time for doing so. - reading, experimenting etc. in our project.
So, All in all , what kinds of performance improvements can we hope for? 5 out of 20 secs on the warm start? Or is it 10 % nitpicking? Whats the ball park figure for what we can hope to achieve here given our setup? What do you think based on above?
Maybe someone out there have done some finetuning of JVM parameters in a similiar PC environments like, with similiar fat clients...? Finetuning so and so - gave 5 secs. So start your work with these one-two parameters?
Something like that - some best practices? Thats what we are hoping for.
best wishes
-Simon

Thanks for helpful answer from both you and kajbj.
The app doesn't use shared network drives.
What are you doing between main starts to get executed and the UI is
displayed?
Basicly, Calculating what to show in the UI. Accessing server - not so much, there are some reads from a cache, but the profiling doesnt indicate that it should be a problem. Sure, I could shift the startup time to some other slot, but sofar I havent found a place where the end-user wouldnt be annoyed.> Caching of something would seem most obvious. Normal VM stuff >seems unlikely. With profiling i basicly find that ''everything'' takes a lot longer in the cold start scenario. Some of our local java methods are going to be rewritten following our review. But what else can be tuned?You guys dont think the Java Quick Start approach, with more jars in disk cache will give something? And how should that be done/ what does people do?I.e. For the class loader I read something about
1.Bootstrap class loader
2.Extensions class loader
3.System class loader
and is wondering if this has something to do with the cold start problem?
The extensions class loader loads the code in the extensions directories (<JAVA_HOME>/lib/ext
So, we should move app classes to ext? Put them in one jar file? (We have many). Best practice about that?
Otherwise it seems to me that it must be about finetuning the JVM?
I imagine that it is a question about:
1. the right heap size
2. the right garbage collection scheme
Googling heap size for XP
CHE22 writes:
You are right; -Xms1600M works well, but -Xms1700M bombs
Thats one best practice or what?
On garbage collection, there are numerous posts, and much "masters of Java black art" IMHO, And according to profiling GC is not really that much of a problem anyway? Still,
Based on my description I was hoping for a short reply like "try setting these two parameters on your xp box, it worked for me" ...or something like that. With no takers on that one, I fear people are saying that there is nothing to be gained there?
we read:
[ -Xmx3800m -Xms3800m
Configures a large Java heap to take advantage of the large memory system.
-Xmn2g
Configures a large heap for the young generation (which can be collected in parallel), again taking advantage of the large memory system. It helps prevent short lived objects from being prematurely promoted to the old generation, where garbage collection is more expensive.
Unless you have problems with pauses, try granting as much memory as possible to the virtual machine. The default size (64MB) is often too small.
Setting -Xms and -Xmx to the same value increases predictability by removing the most important sizing decision from the virtual machine. On the other hand, the virtual machine can't compensate if you make a poor choice.
The -XX:+AggressiveHeap+ option inspects the machine resources (size of memory and number of processors) and attempts to set various parameters to be optimal for long-running, memory allocation-intensive jobs]
So is Setting -Xms and -Xmx and -XX:AggressiveHeap
best practice? What kind of performance improvement should we expect?
Concerning JIT:
I read this one
[the impact of the JIT compiler is obvious on the graph: at startup the time taken is around 500us for the first few values, then quickly drops to 130us, before falling again to 70us, where it stays for 30 minutes,
for this specific issue, I greatly improved my performances by configuring another VM argument: I set -XX:CompileThreshold=50]
The size of the cache can be changed with
-Xmaxjitcodesize
This sounds like you should do something with JIT args, but reading
// We disable the JIT during toolkit initialization. This
// tends to touch lots of classes that aren't needed again
// later and therefore JITing is counter-productiive.
java.lang.Compiler.disable();
However, finding
the sweet spots for compilation thresholds has been tricky, so we're
still experimenting with the recompilation policy. Work on it
continues.
sounds like there is no such straigth forward path, it all depends...
Ok, its good, when
[Small methods that can be more easily analyzed, optimized, and inlined where necessary (and not inlined where not necessary). Clearly delineated uses of data so that usage patterns and lifetimes are apparent. ]
but when I read this:
[The virtual machine is responsible for byte code execution, storage allocation, thread synchronization, etc. Running with the virtual machine are native code libraries that handle input and output through the operating system, especially graphics operations through the window system. Programs that spend significant portions of their time in those native code libraries will not see their performance on HotSpot improved as much as programs that spend most of their time executing byte codes.]
I have the feeling that we might not able to improve performance that way?
Any comments?
otherwise i was wondering about
-XX:CompileThreshold=50 -Xmaxjitcodesize (large, how large?)
Somehow, we still feel that someone out there should have experienced similiar problems? But obviously there is no guarantee that the someone should surf by here!
In c++ we used to just write everything ourselves. Here it does seem to be a question about the right use of other peoples stuff?
Where you are kind of hoping for a shortcut, so you dont have to read endless number of documents, but can find a short document that actually addresses your problem ... well.
-Simon
Edited by: simoncpm on Mar 15, 2010 3:43 PM
Edited by: simoncpm on Mar 15, 2010 3:53 PM

VC Best Practice

Friends
We are using an Federated Portal Environment using VC 7.0
We are developing iviews using visual composer on the producer and then assigning this iviews as remote
delta links on consumer
I was wondering what all are the best practices involved in exposing the developed VC content.
1.>
Do other team members expose the iviews by copying them from the generated folder to another folder?
2.>
Has anyone used the iviews as remote delta links?
3.>
If the VC content is generated on one server and the roles are created on another portal has anyone used
URL based iviews for VC?
4.>
Is URL iview the same as remote urls?
Any information on the above will help.
I am sure this thread will help us all in our plans to expose VC content.
Thanks to all in advance
Regards
Stride

We are trying to do the same.. So far we only were able to make remote roles to work, RDLs do not seem to work with VC generated content

Installation of Config: All in one best practice

Similar Messages

Maybe you are looking for