Installation of CUPC 8 on Windows 7 Ultimate fails

Hi all,
Has any of you experienced this? Installation of CUPC8.0.1 on a Windows 7 Ultimate failed with error:
The wizard was interrupted before Cisco Unified Personal Communicator could be completely installed.
I'm using a Windows 7 Ultimate with Dot Net Framework 4.0. UAC disabled.
CiscoUnifiedPersonalCommunicatorK9.msi is permitted to run at the 'unrestricted' authorization level.
Any idea? Thanks in advance!
Kevin

Issue resolved.
I'm using the msi. For whatever reason, I have to uninstall the CIPC and remove cisco and cisco systems folder under c:\program files.
It seems that CUPC wants a clean installation. I had CIPC and CUPC installed on this machine before.
Kevin

Similar Messages

  • W500 w/ Windows 7 64-Bit Ultimate fails to recognize some audio CDs

    My DVD/CD drive (a HL-DT-ST_DVDRAM_GSA-U20N) in my Lenovo W500 laptop (running Windows 7 64-Bit Ultimate) fails to recognize some audio CDs.
    It recognizes most audio CDs, but a few are not recognized by Windows 7 itself, or by any other program on my computer.
    These CDs are recognized by other Windows 7 computers.
    I don't think that it's a copy protection issue, since the CDs don't mention any copy protection scheme (and also since they work on other Windows 7 machines).
    One CD that wasn't recognized by my machine was the second CD from a two CD set (the first CD was correctly recognized).
    I have the latest updates for Windows, and all my programs, drivers, BIOS & firmware.
    Thanks.

    What kind of behavior are you getting from the drive? If it's spinning up, down, and up again your lens might be dirty or the drive could be failing. 
    If you do clean the lens, be careful. Do your research first or you might make it worse.
    Edit: Replacements are:
    42T2511 or 42T2541 (DVD)
    42T2543 or 42T2513 (DVD/CD-RW combo)
    42T2545, 42T2515 or 42T2551 (DVD-RAM/RW)
    You can get the 42T2543 for $23 and the 42T2545 for $45 on eBay.

  • The installation of SAP Front-End components failed with 95 errors.

    I tried to install SAP GUI 7.20 on Windows Vista X64.  And I got this error message:
    The installation of SAP Front-End components failed with 95 errors.
    This 7.20 version used to run on this operating system fine. I reinstalled the OS, and now I got this.

    Hi,
    I suppose you reinstalled the same OS.
    Did you install the JSDK (java) afterwards. As you must be aware Java is a pre-requisite for the SAP Frontend.
    Also make sure you have set the environment variables after installing java.
    Further documentation, the SAP installation manual can be found in the u201CDOCUu201D folder of the installation software.
    Regards,
    Rohan.

  • Error 0x80300024 when trying to install Windows Ultimate 32 bit on a T60

    I have been trying to install Windows Ultimate 32 bit on a T60 with a 128GB Solid state hard drive and I keep getting the error "Windows cant install to the current location Error code 0x80300024" I have formatted the drive in another PC, created the bit locker partition, but still windows says it is "unallocated space" Can anyone help please
    Moderator note: OS corrected in subject line

    Says "A problem occurred while extracting the archive.  Please try downloading the Photoshop Lightroom 5.7.1 installer again".
    Thanks!

  • Not Again! Window Ultimate Parallels and Bootcamp

    I have read hundreds of threads and I don’t want this to be another but I have question that were not specifically answered on not answered at all. I am a life long Windows user and finally made the jump a few months ago. I am a photographer and I have many thousands of dollars in (Windows) software. I considered repurchasing some of them, just keeping an old PC, buying new MAC license for the software that offered it but I have decided to run a dual OS MAC.
    Specs:
    Model Name: MacBook Pro
    Model Identifier: MacBookPro5,5
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.26 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 3 MB
    Memory: 2 GB
    Bus Speed: 1.07 GHz
    Boot ROM Version: MBP55.00AC.B03
    SMC Version (system): 1.47f2
    System Version: Mac OS X 10.6.1 (10B504)
    The big question, Bootcamp or Parallels?
    I will use Windows (Vista Ultimate 32bit) for Adobe Master Collection (mainly PS, DW and Flash). I have a few other pieces like Light Room, Aperture and one or two PC only apps. My main uses are minor/moderate .jpg photo retouches/edits in Photoshop and maintain my websites with Dreamweaver.
    Questions:
    1. With my needs, does it sound like BC or Parallels might be a good fit? (File sharing in mind)
    2. What will I see when I fire up the MAC? Will Windows and MAC OS boot at the same time? Is there a choice of what to boot?
    3. File Sharing; Can I take an image that I have brought in via iPhoto, edit it in Photoshop and send it back to the iPhoto library?
    4. I understand that PS and DW are CPU hogs and not really memory. Is this true and should I take my 2gb of memory up to 4gb?
    5..I have seen several comments about a Bootcamp portioned drive being better but no one has explained what that is. Can some one elaborate what that is and is that something done via the Parallels app and if not what is the difference between the Bootcamp partition and what Parallels does?
    6.I will keep my online activities on the MAC side except for my ftp transfers for my sites. With this limitation and limited exposure do you think I need to install a virus protection on the windows side? Does loading Windows increase my exposure to viruses?
    7.With Parallels, Can I shut down the Windows portion and have it apply all the resources back to the MAC os?
    8.I have purchased but not opened Parallels 4.0. I see that 5.0 is out at the same price. Should I go with the new or stick with 4.0 which has been out for a while?
    9.For those that say no to Parallels, should I just work with Bootcamp and a jump drive to move files back and forth?
    10.Finally, with the specs below, how much space should I partition to carry the load?
    *Specs for Parallel:*
    Memory Requirements 1 GB of RAM (2 GB recommended to run Windows Vista). Support for any memory configuration (up to 16 GB), without modifying your host system.
    Disk Space
    Software Installation — 450 MB of available hard drive space for Parallels Desktop 5 for Mac installation (plus space to allocate to your virtual machine).
    *Windows Ultimate Specs:* Not sure exactly how much space it eats up.
    Min Processor Type: Intel x86 - 1 GHz
    Min RAM Size: 1 GB
    Min Hard Drive Space: 40 GB
    *Adobe Master Collection Specs:*
    2GB of RAM (more RAM recommended when running multiple components)
    24.3GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)

    Questions:
    1. Boot Camp. Graphic/processor intensive apps should generally not be run in a virtual environment
    2. It will startup in whatever OS you have chosen the computer to boot from
    3. Yes
    4. Yes..upgrade to 4GB
    5. Running Windows through Boot Camp is no different than running it on any other PC...that's why it's better.
    6. Of course. Windows is Windows no matter how or what it's installed on. It's still vulnerable to the same viruses.
    7. Yes
    8. See if you're entitled to free upgrade to Parallels 5
    9. That's your call. Nobody can make that decision for you.
    10. Depends on how big the hard drive is.

  • Windows Update failed to check for updates with error 0x800B0001

    Hi all,
    I have a WSUS installed on a Windows Server 2008 R2 box, I have a new Windows Server 2012 box (joined to domain) that cannot get updates from the WSUS, whenever I try to search for new updates I receive the following error in event viewer:
    Windows Update failed to check for updates with error 0x800B0001
    Note: I cannot see the Win2K12 server in the WSUS console under computers node.

    I couldn't get it to run even after installing the mentioned KB fixes. So I investigated the error myself, and found a "hack" that seems to fix the issue. Wrote up a small piece on it here:
    http://tplive.azurewebsites.net/2013/12/windows-update-error/
    You and about a thousand other people have reported "I had already installed [the update], but installing it AGAIN fixed the problem.", which is almost assuredly a simple indication that the original installation of the update failed, and you simply did
    not recognize that the installation of the update was not successful.
    The fact that the /selfupdate folder was corrupted (read: missing files) pretty much says it all. There's no bug. Your installation of the update simply failed. (Or, the server wasn't healthy to begin with and you got what you got.)
    Bottom line: The only known cause for a client-side 0x800B0001 error code is that the WSUS server has not been
    properly and completely patched.
    Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence R Garvin
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Windows update fail ERROR_SXS_COMPONENT_STORE_CORRUPT

    Coming from this thread. But my issue is with Windows 7 Home Premium 64 bit.
    http://social.technet.microsoft.com/Forums/en/winservergen/thread/67f1db3b-318e-4250-916c-b0ae4e9012a8
    I have 2 windows update that can never get installed. They give the following error
    1.
    Installation Failure: Windows failed to install the following update with error 0x80070643: Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243).
    2.
    Installation Failure: Windows failed to install the following update with error 0x80070643: Security Update for Microsoft Visual Studio 2010 XML Editor (KB2251489).
    CBS.log file in C:/Windows/Logs/CBS/ have this error (a lot of them since I have been trying to install the fail updates for like half a year, maybe more)
    [gle=0x80004005]
    2011-07-11 10:58:20, Info                  CBS    Failed to get CSI store. [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
    2011-07-11 10:58:20, Error                 CBS    Failed to initialize store parameters with boot drive:  and windows directory:  [HRESULT = 0x80073712
    - ERROR_SXS_COMPONENT_STORE_CORRUPT]
    2011-07-11 10:58:20, Info                  CSI    000003b4 No store version format found; DLL store format 0.0.0.6
    2011-07-11 10:58:20, Error                 CSI    000003b5@2011/7/11:02:58:20.145 (F) d:\w7rtm\base\wcp\componentstore\storelayout.cpp(6636): Error STATUS_SXS_COMPONENT_STORE_CORRUPT
    originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey expression: (null)
    Recently I.E. 9 update can not be installed (tried both windows update & manual install). So this just become something serious.
    From my troubleshooting, it points to a corrupt .Net framework. Unfortunately there is no way to simply repair .Net framework 2.0, 3.0 and 3.5 on windows 7 since they are core component installed with the OS. (Bad decision by MS?) IMHO this is the root cause
    for this problem. Base on internet search there are lots of other case that end up as unresolved!
    Note that I have tried using dotnetfx_cleanup_tool ( version 6.0.3790.0). Only to conclude from the log files that for Windows 7. The framework mentioned above never get removed. Hence the premise behind the tool is misdirection. The tool just say cleanup
    is successful without any visible indicator of saying otherwise. Should warn about it not being able to clean up core .Net Framework.
    I have try a lot of troubleshooting step from Technet & Support.Microsoft.com. This is where I am stuck now. Which I think is the most relevant at this stage
    Repair Corrupt .Net 2.0 & 3.0
    Open CMD as administrator and run:
       C:\Windows\system32>sfc /scannow
       Beginning system scan.  This process will take some time.
       Windows Resource Protection could not perform the requested operation.
    So this means I can not refer to CBS.log and checksur.log for corrupt file. In fact checksur.log just say
       Summary:
       Seconds executed: 19
        Found 1 errors
         CSI Unable to Query Store Version Total count: 1
    Which just repeating back the error in CBS.log
    Need help on the following
    A. From the previous thread, according to Tim
    Quan (<abbr class="affil">Microsoft Contingent Staff</abbr><abbr class="affil">, Moderator).</abbr>
    From the log, there are quite a lot of files missing or corrupt on your system.
            I am afraid that you may need to perform an in-place upgrade or reinstall the system.
    Reinstall the system is not an option (development machine, need the Visual Studio. Too much environment need to set up if reinstall, etc). So please let me know what is and how
    to do  "In place upgrade". I have seen this term being thrown around without any explanation.
    B. The real solution is a tool to
    really clean up and repair the core of windows, be it .Net Framework or whatever else. This is really sorely missing from Windows. Consider that people say Unix/Linux is complicated and hard to maintain.
    When the fact is to do the same on Unix/Linux is just several shell command.
    Anticipating respond from MS staff or MVP regarding this issue on how to do
    B. The old ways (Circa Windos 98) is to do a repair install using install CD, which I have. But I don't think that the CD have repair install option.
    Cheers and TIA!
    * Edited to clarify on Win7 install CD don't have repair install functionality.

    Uh oh, I'm in the same boat ... Windows 7 64-bit, none of the fixits work, can't run sfc /scannow or do the inplace upgrade as I get the same errors everyone else reports.  STATUS_SXS_COMPONENT_STORE_CORRUPT is a total showstopper, sounds like a half-baked
    feature!  I see the original reporter of this bug posted in 2011.  Unacceptable there is no authoritative fix as of yet!  I agree with others, I won't be reinstalling Windows any time soon, I've got too much invested in my install!  All
    my software and software installs work perfectly, only Windows Update and Add/Remove Windows Components seems to be having fits...
    I notice a pattern with a lot of the people replying to this thread:  they're developers with developer boxes and software installs.  Some .Net install botched our component stores?  How is it possible in a modern operating system there isn't
    a way to detect and drop the corrupt metadata/files/frames/tables/whatever and get back to a repairable state?  Who's in charge up there??
    I'm just going to run unpatched until a fix arrives, which I expect will arrive someday real soon now.  Here's what I want: give me a fixit or a manual process to clear the component store enough to allow me to actually complete the inplace upgrade
    (which seems like the only method that has a prayer of repairing our installs.)
    I guarantee Windows 7 will be my last version of windows if no fix ever materializes to this microsoft-engineered bug/corruption.  I'm not going to put up with rubbish.

  • Windows 7 Fails to Start-Up on MBP/Snowleopard

    I have a MBP running Snow Leopard 10.6.8 that is fully up to date. I have installed Windows 7 without any issues during the installation but the computer cannot startup in Windows. When I try I just get the flashing cursor for multiple minutes and then goes to the screen where I have the options to boot in safe mode, normal etc etc. I have deleted and repartitioned my HD 3 times now all with the same issues. Why is it that Windows 7 fails to start-up and is there anything I can do to resolve this issue?
    Thanks in advance

    Apple Boot Camp Support
    DVD was an electronic version burned to DVD using Disk Utility?
    Does Windows get through multiple updates?
    See if there is an Apple tech note above.

  • Now installed CS3 on new Windows Ultimate 64bit - but fonts prob

    Today is Saturday for me in Australia ...
    I thought I would share my experience for others that may be getting a new computer in the near future.
    On Wednesday afternoon Dell delivered new 64bit computer, 8G ram with Windows 64 Xp downgraded from Windows Ultimate 64. I phoned Dell and they said they would send a technician the following day to install Windows Ultimate 64 (which I had paid for). I live a long way out of the city (2 hours) so I was quite impressed with their service.
    This duly happened on Thursday and the computer was running smoothly with Vista Ultimate 64bit in the late afternoon. Although Vista is very different, I am getting used to it and it comes with it's own security. I turned OFF the User Account reminders as they drove me mad constantly asking my permission - turning the reminders off made the installs easier too. I am the only user, so it's fine for me.
    I then spent the rest of that day and Friday installing printers (which took some time getting 64bit drivers) and Adobe CS3 programs. One of the suites didn't activate so I called Adobe (just before closing time) and they activated over the internet as it hadn't de-activated from my other computer properly.
    So, thanks to Bob's earlier advice - I now have all my CS3 Production and Web suites installed and CS3 Indesign.
    The only little glitch appears to be Indesign doesn't see the fonts installed in the Windows folder. I have deleted the Adobefnt.lst and reopened Indesign but it still doesn't see them.
    Have I missed something? Or should I ask this in the Indesign forum?

    I found a post elswhere about the Arial Narrow font family.
    It said to find an old computer/disc that had the Arial Narrow font family dated 1998. I was lucky to find a disc that I had copied my fonts folder in 1998. I deleted all Arial Narrow fonts, and copied the 4 old fonts dated 1998 Arial Narrow family to the fonts folder. All is working properly now.
    The problem apparently has to do with Office 2007 not Adobe.

  • Windows 8 - Windows could not cmplete the installation. To install Windows on this computer, restart the installation

    Having SCCM 2012 SP1 CU3 I attempted to do a pretty simple task.
    Create a capture media for Windows 8 64 Bit and capture the OS.
    The system in question is a Dell Latitude 6430u and OEM Windows 8.
    The system ran as expected, the capture went as expected, but when I deploy the image (Back to the same laptop mind you)
    The following occurs:
    Windows could not complete the installation. To install Windows on this computer, restart the installation.
    Things that I've tried:
     Set the SATA to various modes as it was on RAID on as speculated in some posts
     Saw a posting that suggests pressing SHIFT F-10 to get in to some prompt and run oobe; doesn't work here, I think.
     Added Dell Driver Packs for the system
    As for log files, I'll check C:\Windows\Panther and see what's there.
    Any ideas on how to correct this? Is there a way to go in to the image itself to do so?

    Sorry, I'm not using CM2007, but CM 2012 SP1, CU3.
    I went through the smsts log and found several instances where drivers were missing so I'm guessing that's why it pitched a wobbly about not being a suitable system for the Windows setup.
    Failed to find a suitable device driver for device 'ACPI Lid'. OSDDriverClient 11/15/2013 5:54:57 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'USB xHCI Compliant Host Controller'. OSDDriverClient 11/15/2013 5:55:00 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'SDA Standard Compliant SD Host Controller'. OSDDriverClient 11/15/2013 5:55:00 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'RamDisk'. OSDDriverClient 11/15/2013 5:55:00 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'PCI Simple Communications Controller'. OSDDriverClient 11/15/2013 5:55:01 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'ACPI\DELLABCE\2&DABA3FF&0'. OSDDriverClient 11/15/2013 5:55:02 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'ACPI x64-based PC'. OSDDriverClient 11/15/2013 5:55:02 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Generic Monitor'. OSDDriverClient 11/15/2013 5:55:02 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'PCI Express Root Complex'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 1 - 1E10'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'USB Root Hub (xHCI)'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'ACPI Power Button'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Microsoft ACPI-Compliant System'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Microsoft Basic Render Driver'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Trusted Platform Module 1.2'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Intel(R) 7 Series/C216 Chipset Family SMBus Host Controller - 1E22'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'ACPI Fixed Feature Button'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Generic volume'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Motherboard resources'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device '3rd Gen Core processor DRAM Controller - 0154'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Generic volume'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Generic USB Hub'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Intel(R) QM77 Express Chipset LPC Controller - 1E55'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'System CMOS/real time clock'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Generic USB Hub'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Programmable interrupt controller'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Standard PS/2 Keyboard'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 2 - 1E12'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Generic volume'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Motherboard resources'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Direct memory access controller'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Microsoft System Management BIOS Driver'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Disk drive'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Standard Enhanced PCI to USB Host Controller'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'USB Mass Storage Device'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
    Failed to find a suitable device driver for device 'Integrated Webcam'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
    Which doesn't make sense since the image that I am trying to put on the system is the one I took it from. Before putting the image out I went to Dell's web site and got the Windows 8 drivers for the system and distributed them as I usually do.
    I got the drivers from here -
    http://en.community.dell.com/techcenter/enterprise-client/w/wiki/4372.latitude-6430u-windows-8-driver-cab.aspx
    What I don't get is that I can take the Windows 8 install.wim and do an OSD task with it and there is no issue with drivers.
    One other thing here is the log from the windows\panther folder:
    2013-11-15 17:56:46, Error                 SYSPRP SPPNP: Failed to enumerate PnP DRP files. Err = 0x5[gle=0x000003f0]
    2013-11-15 17:57:09, Error      [0x0f0082] SYSPRP ActionPlatform::LaunchModule: Failure occurred while executing 'CryptoSysPrep_Specialize' from C:\Windows\system32\capisp.dll; dwRet = 0x5
    2013-11-15 17:57:09, Error                 SYSPRP ActionPlatform::ExecuteAction: Error in executing action; dwRet = 0x5
    2013-11-15 17:57:09, Error                 SYSPRP ActionPlatform::ExecuteActionList: Error in execute actions; dwRet = 0x5
    2013-11-15 17:57:09, Error                 SYSPRP SysprepSession::Execute: Error in executing actions from C:\Windows\System32\Sysprep\ActionFiles\Specialize.xml; dwRet = 0x5
    2013-11-15 17:57:09, Error                 SYSPRP RunPlatformActions:Failed while executing SysprepSession actions; dwRet = 0x5
    2013-11-15 17:57:09, Error      [0x060435] IBS    Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x5

  • Equium A300D-16C - Windows has failed to start

    I have a Toshiba Equium A300D-16C and all of a sudden it starts up and goes onto windows boot manager and says that Windows has failed to start and it wont let me do anything else.
    I really dont know what to do and all my uni work is on it.
    It says to put the windows installation disk but its not responding to any disks what so ever.
    If anyone could help Id be grateful
    Thanks

    hi Lashay
    guessing you have xp on this unit try to reinstall bootfiles.
    seems that windows has lost some files...
    this could be software or a hardware issue...
    "fixboot " and "fixmbr" on recovery console should do this job.
    safest way is to get a new hdd and a hdd-usb-adapter!
    install operating system on the new hdd,
    then connect the old hdd using the usb-adapter to the new system and transfer all user files.
    not the system files or maybe you will get the same trouble again!
    if there is a serious problem on the hdd its getting worse with every attemp to read the disk...

  • Error: Windows Vista failed to start. A recent hardware or software change might be the cause

    PLEASE HELP!
    My Lenovo SL500 is not working at all - I get error: "Windows Vista failed to start. A recent hardware or software change might be the cause"
    I tried the following on my Lenovo:
    Windows repair menu = "windows cannot be repaired"
    Lenovo Rescue and Repair 
    Rescued my files from Hard-drive (copied to external hdd)
    Restore System = Failed
    Diagnose hardware = HDD passes all tests
    Don't know what else to do with = Boot from another device ? Access BIOS?
    Because I do not have the windows vista install disks
    I purchased and downloaded the recovery disks from neosmart.net
    The neosmart windows vista recovery disks DO NOT WORK = Error is "Unable to find any valid Windows partitions on this computer".
    The Hard-drive exists because I was able to back-up files from HD through (Lenovo Rescue & Recovery Rescue files). So there is a hard-drive.
    I don't know what to do next? 
    Last resort is to Factory Restore via either the Lenovo R&R or Windows Vista Recovery Disks (neosmart)?
    Will I still have windows? 
    PLEASE HELP!

    Hi, Josemne
    Yes, if you can restore the system through Rescue & Recovery, then you will still have WIndows on your machine, but all your files will be deleted from the hard drive. Luckily, you have already saved those files elsewhere. I would recommend trying to restore the system and see if that works.
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

    I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

    This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
    Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
    tt2

  • Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found

    Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found? How do I fix this? I've re-installed and the auto updater has run...I even downloaded and ran the patcher application? By the way Bridge CS3 doesn't show up in the CS3 program list in the start menu but it is installed in my program files - I've tried launching it directly from there as well. Bridge CS2 is operating just fine.
    Update: I installed and ran the Adobe Support Advisor, resulting in - Issues: "The module found no solutions to report for the selected log file."
    I tried to package the report and the error read: "The size of the package is too large to be handled with the current configuration! Please contact Adobe Support for additional information."
    I opened a web based report/case number at the Adobe Support Portal about the missing Symlib.dll (including the Adobe Support Advisor error). Their response was: We regret to inform you that complimentary support for your product is not available and/or has expired.

    Did Bridge work before? If so, reset preferences by holding down the Ctrl key when starting Bridge. If successful you will get a Reset Window, choose all 3 options.

  • HT1175 I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

    I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

    A PC can have more issues connecting than a Mac.
    But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
    If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
    Important thing is to get access to the TC.
    The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
    http://support.apple.com/kb/DL1482

Maybe you are looking for