Installation of Developer Suite 10g in Linux

Hi,
I've done the configuration of Developer Suite 10g on Windows OS. But i want to know how can i configure the Developer Suite 10g in Linux platform.
Any link for this would help me a lot.
I have done some configuration, but i'm facing some problems with it. Like i've compiled the form in windows version, but when i try to compile the form in
linux, i'm facing the problems. In the form there are some libraries attached to it. When compiled in Windows, it got compiled successfully, but when i compile it
in Linux, it is unable to find the procedures and function in the libraries. To come out of this situation, i've placed all the libraries and the forms in a single folder. still
the problem exists. It is giving an error saying that the Invalid identifier, whereever i've mentioned the procedures/functions of libraries. Even in windows, i've all
the forms and libraries in the same folder.
Regards,
Alok Dubey

First of all which Linux....????I am successful in installing it. It is Redhat Linux 5.0 Enterprise edition. But i'm facing the problem in configuring it.
I checked out from Oracle web site, this linux version supports the Developer Suite 10g. If u can send me any document
or any link which u felt that it is very useful, then Please let me know.
Have you checked if it is registered with DevSuite10g...???How to check this ..
"I have done some configuration.."
Which....????
I've set the forms path so that i can run the forms using the url in the browser. But i feel that my configuration is incomplete. As i've mentioned already that when my form is
compiled in the windows, it is getting compiled. But when i compile in linux, it is showing the error like Invalid Identifier. Here the Identifier name it is dispalying is the name of function(Which
is in the attached library).
Regards,
Alok Dubey
Edited by: user583531 on Oct 23, 2008 4:06 PM

Similar Messages

  • How to install developer Suite 10g on linux 9

    i am trying to install developer suite 10g on linux 9 ... but i am unable to it.please suggest

    Hi,
    Intalling developer 6i in Linux is not difficult, but I bet that you won't be much impressed by the graphics. Download the software, extract it and then run ./runInstaller from user Oracle (after giving it permissions), and thats it.
    regards

  • How install Oracle Developer Suite 10g for Linux (Including Forms & Reports

    hi
    i want to install Forms & Reports Developer Suite in Linux OS So i have downloaded From OTN Site
    "Oracle Developer Suite 10g for Linux (Including Forms & Reports)"
    These are the File's i have Downloaded:
    as_linux_x86_ids_101202_disk1.cpio
    as_linux_x86_ids_101202_disk2.cpio
    so in the Oracle Documentation Site they have given Guide as Follows:
    $cpio -idmv < as_linux_x86_ids_101202_disk1.cpio
    $cpio -idmv < as_linux_x86_ids_101202_disk2.cpio
    after that what should i do ...
    How to Install Oracle Developer Suite 10g for Linux (Including Forms & Reports)
    Kindly Reply ASAP

    Pl follow the steps in the Install Guide - http://download.oracle.com/docs/cd/B19375_02/doc/frs/install/B19314_02/toc.htm
    Srini

  • Installation of developer suit 10g on windows 7 64-bit

    Dear all,
    I have successfully installed oracle 10g and developer suit 10g in my lappy which runs on windows 7 64-bit, I am able to launch form builder, create a new form and compile it. But when I runs the form the the internet explorer 8 crashes.
    Please help

    I am guessing that you are fairly new to the Oracle Forms product as you are not understanding the difference between the environment where a "form" is developed and the area where it can/will be run in a supported manner. Let me try to start from the beginning....
    1. The Forms Builder 10.1.2 is NOT_ supported to be installed on Windows 7. I can technically be accomplished but is considered NOT supported by Oracle. So unless you have a good working knowledge of the Developer Suite product and the Win7 operating system and don't care about getting technical support from Oracle, I do not recommend attemting to install on Win7. If you choose to install on Win7, you are on your own even if you have a Support agreement. Supported platforms include Windows 2000, Win-XP, Vista (see note 559067.1), Solaris, Linux
    If you feel like you need to have the Builder installed in an UNSUPPORTED environment, you can probably follow the instructions provided for installing on Vista as they will likely work for Win7. If you have access to My Oracle Support, take a look at this document: How to Install Developer Suite 10.1.2.3 on Windows Vista (Doc ID 559067.1)
    Supported Operating Systems and other installation information can be found in the Installation Guide:
    http://download.oracle.com/docs/cd/B25016_08/doc/dl/core/B16012_04/chap2.htm#i1007814
    The only exception to the above is that we now support installing on Vista when following the note mentioned above.
    2. You can "run" your form after it has been designed and compiled, on a Windows 7 machine. The form will run in a browser, using a JRE/JPI.

  • Installation of Developer Suite 10g on XP Home Edition

    Dear all,
    I downloaded Develope Suite 10g (9.0.4.0.1) from OTN and tried to install on a notebook with XP Home Edition.
    The installation failed with the error message that the 'C:\Document \<Userid>\Local Settings\Temp folder is either not writable or no sufficient disk space of 55MB.'
    I can manually copy files and folders more than 55MB into the Temp folder. So the problem does not seem to be disk space or writablity.
    I am wondering if software can be installaed on XP Home Edition. Would appreciate any advices.
    Thank you.

    Hello,
    I you have access to Metalink (http://metalink.oracle.com) :
    Certify - Product Version and Other Selections: Oracle Developer Suite On Microsoft Windows XP (x86)
    Windows XP has 2 editions/versions, Professional and Home. Oracle will ONLY certify on Professional.
    Regards

  • Handling Mulitple apllications with Developer Suite 10g

    Hi all,
    I've a doubt regarding the Post installation of Developer Suite 10g. For example, if i've a client who has two applications; and these two applications are similar to some extent.
    So, In this scenario, i am clue less regarding the set up. i.e.., Both applications can be run simultaneously, by different users. Can some one guide me. Currently, in Forms 6i, we've mapped
    a drive for it and the client changes the mapping whenever, he wants to use another application. But in Forms 10g, I've heard that this can be done using configuratiion files. can u explain me
    a little bit.
    Regards,
    Alok Dubey
    Edited by: user583531 on Nov 3, 2008 3:58 PM
    Edited by: user583531 on Nov 3, 2008 3:58 PM

    Hello,
    With Web version, you can add named sections in the /forms/server/formsweb.cfg file, then call one of this section in the calling URL.
    http://machine:port/forms/formservlet?config=APPLI1or
    http://machine:port/forms/formservlet?config=APPLI2Francois

  • Installed Oracle Developer Suite 10g (9.0.4) in Linux

    my system is Linux enterprise 3, update 5 (Kernel 2.4.21-32.ELsmp)
    I haved Installed Oracle Developer Suite 10g (9.0.4) by using instruction in Oracle9i Developer Suite Installation for RedHat Install successful.
    when I run form builder (oracle_home/bin/f90desm.sh, rwbuilder), it show that:
    Segmentation fault
    Please help!

    And how to set RHEL 3 to allow install Oracle
    Developer Suite 10g (9.0.4.0.0)?Main documentation link:
    http://www.oracle.com/technology/documentation/index.html
    Under Development Tools, click Oracle Developer Suite Release 10g (9.0.4), then View Library (Documentation Library for Windows, Linux, Solaris, and HP-UX). The Tab Getting Started has Install guides.

  • Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???  And which one to install first developer suite or database????

    Hello everyone,
    I have install windows XP in my existing windows 7 64 bit system using virtualization software. I have allocated 1024 MB of RAM to XP virtual windows.
    Now, M trying to install oracle developer suite 10g and oracle database 11 in the XP windows.
    IS 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???
    And which one to install first developer suite or database????
    Thanks in advance.

    you should check (before installing) requeriments from documentation.
    Oracle Developer Suite Installation Guide 10g (10.1.2.0.2) for Solaris, Windows and Linux x86
    Table 4 Memory Requirements for Oracle Developer Suite Components
    Component
    Memory
    Oracle10g JDeveloper (including Oracle Business Intelligence Beans, and UIX and Bali subcomponents)
    Minimum: 256 MB
    Recommended: 512 MB
    Oracle Reports Developer
    Minimum: 128 MB
    Recommended: 256 MB
    Oracle Forms Developer
    Minimum: 128 MB
    Recommended: 256 MB
    I usually install first database and later DS, I never tried first DS and later database.

  • Installation of an Oracle Developer Suite 10g on Windows XP doesnt work

    Hello.
    I try to instal Oracle Developer Suite 10g on Windows XP. I run setup.exe from DISK1 directory. Universal installer starts and Welcome screen appears. I click "Next" to "Specify file locations" screen. But when I choose Source Path and Destination Name and Path and I click "Next" again, nothing happens. In installation log I can see strange error message. You can see it in part of log bellow:
    *** Welcome Page***
    Initializing install inventory
    Setting up install inventory
    *** Specify File Locations Page***
    Setting the 'SourceLocation ( FROM_LOCATION )' property to 'C:\xxx\OracleDevSuit\Disk1\stage\products.jar'. Received the value from the UI page.
    Setting the 'OracleHome ( ORACLE_HOME )' property to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
    Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraClient10g_home1'. Received the value from the UI page.
    Initializing OUI access setup
    Setting variable 'ORACLE_HOME' to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
    Error:*** Alert: null ***
    User Selected: Cancel
    Can anybody help me? I am very confused about this error message.
    Thanks very much.
    Petr.

    Are you logged in as an administrator?
    I wouldn't install in Program Files anyway. I'm not sure, but I have a gut feeling that Oracle doesn't like spaces in file and directory names. Install in C:\Oracle directory.

  • Connectivity and Installation Problem in Developer suite 10g

    Please help me solve this problem since I am beginner to Oracle 10g database and Developer suite 10g.
    1. I have loaded successfully Oracle 10g database on my server with windows OS 2003 having IIS option selected and configured as my Domain server.
    2. I have loaded Developer suite 10g complete in another PC with windows XP. I am able to connect to the database and also OC4J is started and Run form in test mode also works. Also I have developed some forms using developer suite and I am able to run the fmx runtime form in this computer.
    3.Now my problem is I have a local LAN and at present there is no internet or web site for this company but they want to work in lan and all departments want to access the data from the server.(Later on when they get a website at that time they want to deploy the forms to the web)
    4.Please tell me how and where I will store my fmx file. If I have to save it in the server then how will the clients access it.
    5. How to install the developer 10g runtime only in client PC's (OS windows xp) since there is no option in the CD to select the installation like previous releases like D2k.
    6. There is no middle tier in this case. Only One server as domain
    and client pcs.
    Please guide me,matter urgent.
    Thanks in advance

    Regarding this point -
    1.
    Then you should be able, for testing purposes, to do the same from other Clients.
    Then I have to install developer suite 10g in client pc's but the runtime option selection is not available in the CD. How to proceed?
    2.
    For production environment, as already said, you should install some Application server. If you only need Forms and Reports you can install the standalone version Forms&Reports services, without infrastructure.
    This means I have to install the standalone version Forms&Reports services in the same server where I have installed 10g database and this also being a domain server.
    (We do not have sufficent computers where one can use it as application server). Hence only one server with OS windows 2003 and 5 computers with windows xp is available).
    Please explain the steps to proceed .
    thank you

  • Developer Suit 10g Installation

    I am trying to install Developer Suit 10g. My configuration is 1024 MB RAM, 80 GB HDD and AMD Athlon 3400+ processor. The OS is XP Home. Database 10g is already installed and running on the same machine.
    In the very begining Universal Installer is giving me this error message, "Invalid staging area. There is no top level components for Windos NT, Windos 2000 available for installation in this staging area."
    My question is can I install Developer on XP Home?

    select deferent folder and defferent home for developer. by default installer select the home where you have install database. you should change it.

  • Developer suit 10G installation Guide?

    Hi
    Can any one send me the Developer suit 10G installation Guide if possible step by step?
    Thanks In Advance
    Noman

    http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm

  • Installation developer suit 10g on windows 7 64-bit

    Dear all,
    I have successfully installed oracle 10g and developer suit 10g in my lappy which runs on windows 7 64-bit, I am able to launch form builder, create a new form and compile it. But when I runs the form the the internet explorer 8 crashes.
    Please help

    Hi this is the Oracle Designer forum, you would be better off on the Forms forum

  • Installation of Oracle Developer suite 10g on windows 8

    Can any one Please confirm, if Oracle Developer suite 10g is supported on windows 8 or not? Any types of Documents/materiel in this regard shall be highly appriciable.
    Regards,
    Nahidullah Khan

    It is an unsupported/uncertified combination - so the install may or may not work as expected. If the install completes, there no guarantee that the software will work as expected. Supported/certified OS versions are listed on the Install Guide. Is there a reason you are using this combination ?

  • Upgrade Oracle Developer Suite 10g (9.0.4) to Release 2 (10.1.2) !

    Hi,
    I'm having some difficulty on upgrade from Oracle Developer Suite 10g (9.0.4) to Release 2 (10.1.2). My application stop to run after upgrade.
    Windows registry names change again, some forms services configuration files too, i'm getting crazy.
    /forms90 doesnt exist anymore, F90...., etc.....
    now names became 'frm' ou 'forms'
    I have to change many customization values and paths inside config files.
    Is there a good receipt for doing the pos-installation tasks for an upgrade ?
    Regards
    Nelson

    And how to set RHEL 3 to allow install Oracle
    Developer Suite 10g (9.0.4.0.0)?Main documentation link:
    http://www.oracle.com/technology/documentation/index.html
    Under Development Tools, click Oracle Developer Suite Release 10g (9.0.4), then View Library (Documentation Library for Windows, Linux, Solaris, and HP-UX). The Tab Getting Started has Install guides.

Maybe you are looking for