Installation of ECC 6.0 EHP 6 IDES

Hi Experts,
I want to install ECC EHP 6 on Windows Server 2012 with MSSQL SERVER.
I tried 4 times but didn't get success everytime, system Fails at Import ABAP steps.
I am trying with BD IDES of EHP6.
If possible please explain me the steps from scratch as again I am going to install Fresh on my Machine.
-Regards
Rohit

Hi Rohit
You should clean the system and again start the installation from scratch.
1. Your machine name CAN NOT be more than 13 characters. Otherwise you’ll get an error during installation.
2.increase your virtual memeory.
3.install JDK CORRECT one.
SAP IDES ERP 6.0 EHP4 / NetWeaver 7.01 Installation Guide on Windows 2003 64-bit – Part 2 &laquo; Zieglers

Similar Messages

SRM "one-client" installation on ECC 6.0 EhP: Own client needed for SRM?

Hello experts,
i've a question concerning the SRM "one-client" installation on ECC 6.0 EhP4 as Add-On.
Is it possible to use SRM and ERP funtionality in a single client e.g. 001?
Or do we have to use different clients on the system like for SUS?
I haven't found any information regarding this topic in SAP ressources. I'm currently using CG "SAP SRM on One Client in
SAP ERP" Release date 2008 (found on marketplace/srm-inst --> srm7.0); SRM - Technical Basis Configuration (BuildingBlock S00/S03). I'm facing problems while going through the following customizing steps:
Assign logical System to Client [both logicall systems are on the same client (001)] ==> error while trying to reference the second logical sys. because client (001) cannot be used again (own presumption: error message differs)
I've seen that some of you have successfully installed and customized this szenario. If someone could provide me any helpful information or guideline how to proceed in general... would be great...
Best regards,
PATRICK

Thanks for your reply. I've checked the offline documentation because i've no access to solman.
There is a document which describes the steps for configuring one-client customizing on marketplace.
Link: [SAP SRM 7.0: SAP SRM on One Client with SAP ERP|https://websmp203.sap-ag.de/~sapidb/011000358700001201562009E]
The problem is that its impossible to cofigure the system like it's described in the document.
Let me explain why...
SRM Addon is installed and customizing is done in client 001 (same client as erp)
overview about defined logical systems:
-ONECLNTERP (for ERP is defined)
-ONECLNTEBP (for SRM is defined)
When I try to assign the logical system to client 001 it works for the first entry
for the second log. system it shows up an error message.
-->I assume because client 001 has been already assigned. I cant use client 001 again.
But One-Client szenario schould be possible in a single client or is SAPs One-Client more like One-System with differnet clients for SRM and ERP on the same machine?
Because of the above mentioned problem I assume that it's impossible to run ERP and SRM in the same Client number.
Am I right? Do I have to use two Clients on One System for proper Customizing?
Or if it's possible to use a single client on one machine for both ERP and SRM how is it possible to assign two log. systems to one client number?
I'm totally confused. Any help would be appreciated - any tips/hints/experiences from someone who has customized One-Client?
BR, Patrick

Need ECC 6.0 EHP 5 Fresh installation Manually prepared Step by step Guide

Hi Expert,
I am new for Installations of SAP systems presently am working in support project. I am going to install ECC 6.0 EHP 5 with
Linux/oracle fresh installation on 12/01/2012.
Can any one help me to do the installation.
If you have manually prepared Step by step document please mail me
my mail id is :sprasad.k7@gmail
THANKS IN ADVANCE.
Regards,
Sivaprasad.
Edited by: kurapati siva on Jan 7, 2012 10:09 PM

Srikishan D wrote:
Hi,
>
> Check out the steps mentioned in the official SAP Document:
>
> http://service.sap.com/instguides -> SAP Business Suite Apps -> SAP ERP 6.0 -> SAP EhP EhP5
> Installation guide for your OS/DB
> First Steps for EhP5 for SAP ERP 6.0
> How to Install EhP5 for ERP 6.0
>
> - An EhP5 Ready installation only installs a system at Netweaver 7.0 EhP2 and ERP Components at 600 level.
> - You need a Solution Manager 7.01 at Stack 26 to generate a stack.xml for EhP5 Installation.
> - Check which technical usage types you need to install as part of Eh5.
>
EHP5 installation comes with Central application component i.e. SAP_APPL and EA-APPL on 605 version. Its different from EHP4 installation where all ERP components comes on 600 release.
Thanks
Sunny

ECC 6.0 SR3 IDES installation problem

Hi,
We are installing ECC 6.0 SR3 IDES on Solaris 5.10 and Oracle 10g.
The disk space available for sapdata is 270 GB and the RAM of the server is 8 GB.
22 GB of SWAP we have maintained.
The server has 2 physical processors and each processor has 4 cores.
The server is UltraSPARC-T2+.
We are installing only ABAP stack which has 112 jobs for Import ABAP phase.
Initially we had maintained 5 parallel jobs for Import ABAP/R3load.
But then it was giving error for some of the pachkages like e.g.
(RTF) ########## WARNING ###########
Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(DB) INFO: REPOSRC created #20090115221342
DbSl Trace: Error 18 in stmt_execute() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-18 occurred when executing SQL stmt (parse error offset=0)
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "REPOSRC"
(SQL error 18)
error message returned by DbSl:
ORA-00018: maximum number of sessions exceeded
(DB) INFO: disconnected from DB
Hence first we reduced the no. of parallel jobs to 3, then 2 and then to 1.
With 3 and 2 also it was giving same error; but with 1 job it is proceeding but obviously very slow.
The import phase has 112 jobs to finish and this issue has been pending for more than 5 days now!
Suggest a solution ASAP.
Thanks & Regards,
Tejas

Hi Chandra,
Thanks for the reply.
I have already increased the value of session parameter from 96(default) to 180 and process from 80 to 150.
No. of sessions = 1.2 X No. of processes
Please suggest.
Thanks & Reagrds,
Tejas

Install both SAP ECC 6.0 EHP 4 and Solution Manager in C drive

Hi, SDN fellows.
I just want to confirm this.
I am trying to install SAP ECC 6.0 EHP 4 and Solution Manager in C drive. Are these OK, since they both will be installed under the C:\usr folder?
What precaution we need to install these two SAP components in the same drive (C)?
I am installing both components in MS Window Server 2008 R2 SP1 with MS SQL Server 2005 SP3.
Thanks,
KC

Hi, Nick.
Sorry, I missed the "IDES". I am installing SAP ECC6.0 EHP4 IDES system for training purpose within the organization.
I am referring to the Installation Guide - SAP ERP 6.0 EHP Ready ABAP on Window MS SQL Server (Based on NW 7.0 incl EHP 1). All downloaded installation files are from: EHP4 for SAP ERP 6.0/NW7.01 --> IDES --> --> Widnows Server --> MS SQL Server.
The OS is installed in C drive.
I have allocated 250GB in C drive and 200GB in D drive from SAN.
For IDES system (I know it is similar to the standard ECC), is it also recommended to install in D drive (separate from the OS)?
In this case, should I install both Solution Manger and IDES in D drive?
Or what is the best combination where I should install these two systems?
Thanks,
KC

An error occurred while installation of ERP 6.0 Ehp 6.0 on Sybase ASE 15.7.0.

Hi All
I am installing SAP IDES Ehp 6 on SYBASE_ASE_15.7.0.50 and facing an error as follows:
An error occurred while processing option Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > Sybase ASE > Central System > Central System( Last error reported by the step: Assertion failed: File C:\SAP ECC 6.0 Ehp 7.0\Sybase ASE 15.7.0.050 RDBMS\Sybase ASE 15.7.0.050 RDBMS Windows Server on x64 64bit\SYBASE_ASE_15.7.0.50_RDBMS_for_BS_\SYBASE_WINDOWS_X86_64\dbsrvresp.txt is missing on the RDBMS media). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/ERPEhP6/AS-ABAP/SYB/CENTRAL/.
Would you help me please

please download correct software.
Installations and Upgrades - E" SAP ERP" SAP ERP ENHANCE PACKAGE" EHP6 FOR SAP ERP 6.0" SAP EHP3 FOR SAP NETWEAVER 7.0" SOFTWARE PROVISIONING MGR 1.0
SOFTWARE PROVISIONING MANAGER
INSTALLATION, COPY, AND TRANSFORMATION OF SAP ABAP AND JAVA SYSTEMS
General Information
Software Provisioning Manager 1.0 SP04 supports:
With SWPM10SPxx_PL.SAR:
Products based on SAP NetWeaver 7.1x
SAP NetWeaver Composition Environment 7.1x
SAP NetWeaver Composition Environment 7.2
Products based on SAP NetWeaver 7.3x
Products based on SAP NetWeaver 7.4
With 70SWPM10SPxx_PL.SAR:
SAP NetWeaver 7.0, including Enhancement Package 1, 2, 3
SAP Business Suite 7i 2011, 2010, 7 SR1, 2005 SR3 based on SAP NetWeaver 7.0, including Enhancement Package 1, 2, and 3
SAP Solution Manager 7.0 including EHP1 SR1
SAP Solution Manager 7.1 SR1
Thanks
Siva

Error in installation of ECC 6 Import ABAP

I have got error during installation of ECC 6 on win 2003 and oracle.
"Not all objects are succefully processed. DIAGNOSIS: For detail see output file with invalid objects invalid_objects.txt and log file object_checker.log SOLUTION: Normally it indicates the data load error but in some special case (for example if some objects were created or loaded externally) you can press OK to continue.
Here is invalid_objects.txt
checkObjects=
dbType=ORA
strDirs=E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_1\EXP1\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_2\EXP2\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_3\EXP3\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_4\EXP4\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_5\EXP5\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP6\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP7\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP8\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP9\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP10\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP11\DATA
trace=all
tskDir=C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS
package   object type action status
SAPDFACT ?N      pkey create
and object_checker.log
INFO: 2020-12-31 10:12:55
Object Checker is started.
CONFIG: 2020-12-31 10:12:55
Application options:
checkObjects=
dbType=ORA
strDirs=E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_1\EXP1\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_2\EXP2\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_3\EXP3\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_4\EXP4\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_5\EXP5\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP6\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP7\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP8\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP9\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP10\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP11\DATA
trace=all
tskDir=C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS
CONFIG: 2020-12-31 10:12:55
List of packages with table structure: 'SAP0000'.
INFO: 2020-12-31 10:12:55
19 packages found in 'E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_1\EXP1\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_2\EXP2\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_3\EXP3\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_4\EXP4\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_5\EXP5\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP6\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP7\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP8\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP9\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP10\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP11\DATA' directories.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'MAPR~ADQ' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (!MSS) index 'MLST~1' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'MLST~1AD' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (!MSS) index 'MLST~2' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'MLST~2AD' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (!MSS) index 'MLST~4' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'MLST~4AD' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'PLMK~ADQ' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'SEMPLOYES~ARE' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'SEMPLOYES_APP~ARE' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'SEMPLOYES_RB~ARE' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'SEMPLOYES_TI~ARE' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'SEMPLOY_CSH~ARE' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'SEMPLOY_SEARCH~ARE' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'STXH~TDN' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:58 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'BBSID~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:58 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'BSID~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:58 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (DB6) index 'DB6CSTRACE~1' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'KBED~3' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'KBED~4' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'NAST~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S003~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S003BIW1~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S003BIW2~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S004~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S004BIW1~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S004BIW2~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S006~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S006BIW1~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S006BIW2~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S011~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S011BIW1~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S011BIW2~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S012~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S012BIW1~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S012BIW2~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S013~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S013BIW1~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S013BIW2~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S031~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S032~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:13:02 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (DB6) index 'VARIS~DB6' found in STR file for 'SAPAPPL2' package.
TRACE: 2020-12-31 10:13:04 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Data load must be skipped for table 'DBPROPERTIES' from STR file for 'SAPSDIC' package.
TRACE: 2020-12-31 10:13:04 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Data load must be skipped for table 'DDLOG' from STR file for 'SAPSPROT' package.
ERROR: 2020-12-31 10:13:05
1 objects have error/ignore/execute or unknown status in the task lines.
Invalid objects are saved in 'invalid_objects.txt' file.
INFO: 2020-12-31 10:13:05
Object Checker is stopped.
I have not installed any object manually. Also not sure which object did not installed properly? Any idea or suggestion for this?
Thanks
Edited by: Prinesh Patel on Jan 7, 2008 7:35 PM

Hi Patel,
                     Thanks for your update.
Regards,
Hari.

Installation of ECC 6.0 on Windows Vista

HI,
I am not able to install ECC 6.0 on windows vista OS even I tried to install windows server 2003 but it shown incomitablity error becuse of newer version of OS(windows Vista).Could you let me know how can i remove the vista and get win server 2003 installed at my system.If I run the set up file of windows server 2003 it gives error "setup cannot run in program compatibility mode".Please let me know what else i can do.
Thanks & Kind Regards
Sanjay Rai

Hi Sanjay,
Few things you have to check before installation of ECC 6.0 on any OS :-
1. From where have you got the dump for ECC 6.0? Have you downloaded it from Service Marketplace. If Yes then you have to check whether your OS is also of the same configuration as the dump you are using like if you are using 32-bit then your OS also needs to be 32-bit only. As far as ECC 6.0 SR3 is concerned it can be installed on 64-bit machine only. For 32-bit machine you have to go for SR2.
2. Also the supported JDK for the ERP 6.0 is JDK 1.4.2_17 as per SAP Note 716604. Please uninstall the current JDK and install the required one. The 64 bit JDK as per the SAP Note 941595 is available on the new IDES server.
3.Although there is cheat code to install the SAP ERP6.0 in 32 bit mode as well. But in that case NO Java system will be installed. I will advise for 64 bit method with Java system. Only use 32 bit mode if 64 bit is not possible. Follow SAP Note 1244548.
4. The DB Size system will need around 190 -200 GB to install.
Thanks,
NItesh Jain

What is the difference in SAPS requirement for ECC 6.0 (No EhP) vs ECC 6.7 (EhP 7)?

Hi Team,
Hope you are doing well, Can you please explain the below points.
1)      What is the difference in SAPS requirement for ECC 6.0 (No EhP) vs ECC 6.7 (EhP 7)?
2)     What is the split of SAPS between Core and RAM?
Thanks in advance.

Hi Deepak,
We are not partner/ customer with SAP, so don't have access to tools.
Can you please give theoretical idea about
1)      What is the difference in SAPS requirement for ECC 6.0 (No EhP) vs ECC 6.7 (EhP 7)?
2)     What is the split of SAPS between Core and RAM?
Thank you,
Gopi Reddy

SRM 7.01 with ECC 6.0 EHP 7.0

Hi Guys,
Does anyone have an idea on SRM 7.01 compatibility with ECC 6.0 EHP 7.0. Any things needs to be taken care from SRM side after an upgrade to EHP 7 in ECC side.
Please share your experience.
Thanks for your reply in advance.

Hi Imran,
It is compatible, But still for confirmation please see the product availability matrix.
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/support/pam/pam.html?smpsrv=https%3A%2F%2Fwebsmp203.sap-ag.de#pvnr=01200615320900003495&ts=4&pt=t%7Co
Best regards,
Rohit

License Key Request from SOLMAN VS SMP for SAP ECC 6.0 EPH4 IDES install

Hi, SDN fellows.
I have some doubt on the right way/options to request License Key for SAP ECC 6.0 EPH4 IDES.
Previously, I read that the only way to get license key is to generate it through SAP Solution Manager. If this is the only way, we will have to install Solution Manager just to generate the license key (we are currently don't have SolMan running in our landscape).
I also read that I can request license key through http://service.sap.com/licensekey. I checked the link and see that we have the 10 digits installation number for Product: SAP ERP.. Currently there is no system defined for this installation number.
I went through the first two screens, seems like they have options for SAP ERP 6 --> IDES.
If I can get a license key from http://service.sap.com/licensekey, do I still need to install Sol. Man. to generate the license key?
What are the difference the license key generated from Sol. Man. VS the one we request from SMP?
Thanks,
KC

Hi, Vishnu.
So, now I understand I need two keys: Solution Key and also License key.
I should obtain Solman key before I start installation , as the SAPinst will ask to enter Solman key before it can proceed to install SAP ECC IDES.
You said I can obtain Solman key through OSS note. I went in to SMP just now. Navigated to Help& Support --> Report a Product Error --> New Problem Solving Request.
I selected Customer Number, Product, Instillation # , and enter * for System ID. The search result returned no system found. The problem here is we don't really have any system ID defined for SAP ERP IDES since we haven't start installing the system.
Is that true that I will only see the System ID in OSS Message interface when I submit the System ID for the license key?
I thought this is a post-installation step to apply for a license key. If I can to do it before the installation, how can I get the 11 character hardware key before installation (assuming I cannot run the SLICENSE TCode and saplikey u2013get command)?
OR how can I create OSS message to request SolMan key when I don't have a system ID (that already registered for license key) in SMP?
OR I should just go ahead to install Solution Manager to generate Solman key (during pre-installation), and request for license key in SMP in post-installation?
Thanks for advise,
KC

TS1702 NY post AP, after update, crashes upon launch. Tried all re-starts & re-installs, to no avail. Any ideas?

NY post AP, after update, crashes upon launch. Tried all re-starts & re-installs, to no avail. Any ideas, or is it just my punishment for reading it at all?

The quote below is from a previous thread where several people solved your same problem with the stated technique. Maybe it will work for you. Good Luck.
iTunes 7.0.2 FIX ("Have tried all 'fixes' suggested but iTunes STILL not opening").
1. Uninstall iTunes and QuickTime.
2. Do a search in the C:\ drive for "QuickTime". Delete EVERYTHING that pops up.
3. Restart the computer.
4. Install QUICKTIME ONLY
5. THEN install iTunes......and IT WORKS.....Just remember to install QuickTime FIRST.

SRM 7.0 PO not replicated to Backend ECC 6.0 Ehp 4

Hi SRM Gurus,
SRM 7.0 SP 8 - ECC 6.04 SAPKH60406 ECS
RFx Response to PO -
SRM Local PO is created and is in held status. Purchaser gives the source of supply and Acc Assignment and order it.
PO now is in Ordered status.
Issue: this PO is not replicated to Backend ECC 6.04.
Did the Debugging as follows:
1. BP at B46B_DPO_TRANSFER.
2. Got the PO GUID from the BBP_PD transaction.
3. FM BBP_PD_PO_TRANSFER_EXEC, execute it and it stopped in the breakpoint.
4. On 'FUNCTION 'BBP_PO_INBOUND' DESTINATION lv_destination', hit F6.
5. Checked lt_bapi_return details.
Here there should be information regarding some error during the PO copy to backend.
With this error message you can check why the PO was not created in backend.
ERRORS from Backend are as follows:
1.   No instance of object type PurchaseOrder has been created. External reference:   E BAPI 001
2.   Document contains no items       E    ID 06   Number 010
3.   Please enter items first.              W   ID 05                 005
No XML messages in SXMB_moni both in SRM side and ECC side.
What am i doing wrong here? Any help is highly appreciated.
with regards,
Freemind

RZ20 errors:
Local Errors:   Business to Business Procurement(600)
Error reading export data for EXEC transfer of purchase order
Error in local purchase order; no update of references in EXEC system
Backend Errors:
PO 3000000051: No instance of object type PurchaseOrder has been created. External reference:
Purchase order 3000000051: Document contains no items
Purchase order 3000000051: Transfer Failed; Resubmit
Since we are in SRM 7.0 ECC 6.04 Ehp 4, with PI 7.11 + ROS and no SUS.
doent the system uses ESOA Service for PO replication.
We did CCTR / CPPR scenarios too. Both are sucessful.
Do we need to impl BADI PUR_SE_PO_INTERFACE_OUT_SELECT
But thats for Service hierarchy and Service POs - We dont have Service hierarchy or SUS in our SLD.
IF PO replication also uses PI, what configuration do i need to do?

What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi All,
What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi Jayachander,
Have a look at these sap notes:
For taking backup: Schedule from DB13 and get the exact command from Logs
1841993 - SYB: How to schedule backups in DBA Cockpit
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
How to restore DB
1611715 - SYB: How to restore a Sybase ASE database server (Windows)
Divyanshu

Potential Conflict? - ECC 6.0 EHP 4 vs. SAP PI 7.0 SP12

Hi Experts - We are currently upgrading our ERP system to ECC 6.0 EHP 4.
Our middleware layer is a SAP PI 7.0 in SP12.
Are there potential conflicts between these two? Maybe around Proxies?
My current understanding is that SAP PI isn't closely coupled with the ECC system (we mainly use IDocs, some Proxies),
so there shouldne be any issues.
Do you have a different view or experiences? Thanks for your help.
Best Regards, Mathias.

Mathias,
I would suggest to go through the upgrade document to get the exact issues if any are there:
http://service.sap.com/instguides -> SAP Business Suite Applications -> SAP ERP -> SAP ERP 6.0 -> Upgrade. Then select the OS and Database.
Regards,
---Satish

Installation of ECC 6.0 EHP 6 IDES

Similar Messages

Maybe you are looking for