Installation of fail safe unsuccessful need hlp

tried to install failsafe but failed:
1. using microsoft cluster server
2. installing oracle fail safe 2.1.3
3. using 2 netfinity 7000 and 1 ssa
4. method of installation = staged
5. on partitioned configuration
4. error as follows:
a. dr watson for windows nt
application error
oradim80.exe
b. appschkd vrf(0): file_not_found while executing 'lu'
c. WinZip extractor failed may be due to bad disk or file trasfer
null

This happened with the OS X Mountain Lion upgrade, I had to 'move' three files (com.pgp.framework.PGPwide, keyserver1.pgp.comGIobalDirectoryKey.asc, and PGPnke.kext) to get my system up and running again.
This time  you have to move the file PGPwde.kext found under the /Library/Extensions/  I have those files on my desktop, but you can move them anywhere you want.
Reboot the Macn and voila!  
Yes I upgraded to Maverick last night and the first issue I had was with the KeyChain, the fix was easy, but the system wouldn't let me make it since the PGP file was rebooting the system. I had to go into SafeMode (press SHIFT upon reboot) and then I fixed my KeyChain probem (had to reset the password), then I fixed the PGP problem.
Thanks and hope this helps!

Similar Messages

  • Fail safe logic needed for purchase order upload program

    Hello all,
    i am working on creating PO's by reading data from a text file. I need to implement fail safe logic in it, which is to make sure this program uploads all the records in the text file successfully. For example, i have 1000 records in my text file and while running the upload program if the program times out while creating the 500th PO or if SAP is down at that time, then we have 499 PO's created and 501 yet to be created. But if we run the same program again, we will generate duplicate PO's for 499 again. I want to avoid this kind of problem.
    How do i implement this idea?
    Kindly guide me on this.
    Thanks.

    Ok ..
    Then I would suggest you use Application Log to keep the success and error messages of PO processing.
    You can check trsnaction SLG0 and create your own application log object.
    Then you need to use FMs BAL_LOG_* to crate and add messages to it.
    This way you will have a facility to check as which of your records are converted to PO for a run.
    In case SAP gets down in between , still you can find the details using Xn SLG1 and then accordingly remove the records from your file which are already converted to PO.
    Thanks,
    Ram

  • Error in Creating the Oracle Fail Safe Group during installation on MSCS

    Hi All,
    I am installing ECC 6 dual stack on MSCS.
    I have done steps till CI installation as per installation guide.
    I am gettig the following error in the step "Creating the Oracle fail safe group" while changing physical hostname into the virtual databse hostname using configtool in secure store parameter jdbc/pool/<SAPSID>Url as per the installation guide.
    "Error occurred while working with configuration(scanning)
    MSG:Error while connecting to the database"
    I think it is not accepting the virtual hostname.
    In our scenario CI is running CI node and DB instance is running on DB node.
    I have followed the steps as per the installation guide.
    Please let me know how to resolve this issue.
    Database - Oracle 10g,OS is Windows server 2008 enterprse edition.
    Regards,
    Dinakar
    Edited by: mutnuru dinakar on Jun 1, 2011 1:39 PM
    Edited by: mutnuru dinakar on Jun 1, 2011 1:40 PM

    Hi,
    Thanks for your reply.
    1) did you stop the CI before making the modifications as stated in the installation guide?
         Yes
    2) is your database currently running on the same physical cluster node as your CI?
        No.Database instance is running on DB node and CI is on CI node.
    3) is your database online?
         Yes,it is up and running
    Please let me know if there is anyway to resolve this issue.
    Regards,
    Dinakar

  • I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

    I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

    iTunes:
    AppName: itunes.exe          
    AppVer: 10.5.0.142          
    ModName: unknown
    ModVer: 0.0.0.0   
    Offset: 001be6f6
    Quicktime:
    EventType : BEX   
    P1 : QuickTimePlayer.exe   
    P2 : 7.71.80.42   
    P3 : 4ea5c6ef   
    P4 : QuickTimePlayer.dll   
    P5 : 7.71.80.42   
    P6 : 4ea5c6d5
    P7 : 00005b6d   
    P8 : c0000409   
    P9 : 00000000
    That's consistent with another application (other than QuickTime) having dropped old QuickTime componentry in non-standard locations on the PC.
    So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view options on the PC.
    1. Open My Computer from the desktop or Start menu.
    2. In the Tools menu, click Folder Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
    5. Click OK.
    Now in My Computer, open your C drive.
    Open the "Windows" folder.
    Open the "system32" folder.
    What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • Please Help me ...Fail Safe Server installation..

    We have 2 sever Clustered, on windows 2003 Enterprise and we want to install Oracle 10g database and install & configer the Fail Safe Server, could you please help me by providing the docmantation for best installation of the 10g database and Fail Safe Server.
    Regards.

    As usual you find the documention right here on OTN:
    http://www.oracle.com/technology/documentation/failsafe.html
    Werner

  • Installation of oracle fail safe on windows cluster - plz very urgent

    hi everybody,
    this is the first time i am going to install oracle failsafe on windows clusters.
    i am going to install oracle 9i release 2 software.
    so i have to install the patches.
    plz tell me with oracle cmds how to do the following.
    1. after installing oracle 9i rel 2 how to install the patches to it in windows environment?
    2. how to create oracle database on one node using shared disk for storage.
    3. how to install oracle fail safe on each cluster?
    4. how to configure cluster using fail safemanager?
    plz provide me soln asap very urgent.
    and don't forget to give me the soln with commands aqnd step by step.
    plz plz plz
    thanks in advance
    suresh

    For 9i , this is better:
    http://download-uk.oracle.com/docs/cd/B10501_01/rac.920/a96600/toc.htm

  • OIM 9.1.0.2  - ActiveDirectory 9.1.1.7.0 Installation Status  :    Failed

    Hi,
    I am using OIM 9.1.0.2
    When I install the AD connector from Deployment Manager -->Install Connector, It shows the error
    DOBJ.XML_IMPORT_ERROR
    Unknown tag OBJ_OFFLINED recieved.
    Step 2 : Connector Installation
    ActiveDirectory 9.1.1.7.0 Installation Status : Failed
    Configuration of Connector Libraries
    X Import of Connector XML Files (Using Deployment Manager)
    X Compilation of Adapter Definitions
    Click Retry to retry the installation after correcting the errors.
    What needs to be done for this ?
    Regards
    Praveen

    With the introduction of oim 9.1.0.2, the Offline-Line Provisioning attribute was added to the Resource Object. You are trying to import the connector into an environment that is out of date. The solution to this is to open up the XML file, and cut out the XML tag within your resource object for OBJ_OFFLINED and then it should work. But the next issue you are going to run into is most likely the connector version is not supported in your version so it might not work.
    -Kevin

  • Brand new 10.6.3 snow leopard disc installation always fails on MacBook pro

    So I ask, is the only thing left to do here to buy a new hard drive? I figured I would ask as I feel I have tried everything.
    I have a 17 inch 2.4 ghz intel core 2 duo MacBook pro with 4 gb ram and a 500 gb hitachi 7200 rpm hard drive that was installed in march of 2010. I was running osx snow leopard 10.6.3 with all updates with two partitions, a 450 gb for mac and 50 gb for bootcamp and windows 7. About 3 weeks ago, after downloading some programs from cnet, I started having problems. 
    I could not boot to the Mac side, but booting to windows was fine.  I would get hung on a blue screen with my cursor, but it never would go further. So I used
    my snow leopard 10.6.3 disc to run disk utility, repaired disk and it completed the repair and partitions, always leaving a note saying, " updating boot (something) as needed.  Everything repaired and was corrected, but I still could not boot to Mac. Still hung on blue screen.  I reset the PRAM, still nothing, but still no reoccurring errors in disc repair.
    So I purchased an external hd and backed up everything, since I never used time machine ( I know) and backed up all my data.  I erased and zero'd out everything on the Mac partition.  I then tried to reinstall 10.6.3 on the hard drive, and it seemed to fail repeatedly.  I would install, fail, reformat, repeat repeat over and over.  I was having trouble with the DVD drive taking the disc a few times, and noticed some very minor scratches on the disc, nothing major.  So, I decide it could be the disc, and went out to purchase one at best buy.  Came back, ready to go, took the disc the first time, and fails again and again. ( installation failed, please contact the software manufacturer )
    One thing I noticed in disc utility is that it would always seem to hang up installation around 6.65 gb. So I called my free 90 day software support from apple, and they of course suggested I take it to a Mac genius... Haven't been there yet because of the proximity to my house. I then decided to backup the bootcamp side , which was working just fine, and erased that as well,  I repartitioned the drive, erased the disc and tried again and again and installation kept failing. 
    Other things I have done, took out 2gb ram and tried, nothing.  Also changed a number in terminal that was 12000' to 30000' a tip from another forum, that also failed.  I am at wits end here, and can't find anyone else with this problem.  Any other suggestions before i scrap the hd?
    Thanks in advance for your advice,

    DVD drive ? The software disc itself is brand new and boots fine

  • WSUS reinstall on 2012 SCCM server post-installation task fails to run/finish

    I had to re-install WSUS on a 2012 R2 SCCM server (Windows 2012), and am running into several issues re-installing. It may help to point out that the SCCM SQL server is remote, so this isn't a WSUS / SQL 2012 issue.
    The sticky post at the top of the WSUS forum has helpful troubleshooting information, and I have tried going through this as well as many other threads on this very topic of re-installing WSUS.
    1. Roles for WSUS and WID were removed successfully. The WSUS Website was manually deleted from IIS. As this is a SCCM server, removing the IIS role is not an option.
    2. I removed the existing WID database files for SUSDB
    3. After rebooting, I verified registry keys were gone, system files were cleaned up, and deleted the program files\update services directory
    4. This isn't a permission issue, as I have clearly installed this before on this server.
    5. Registry keys, system files, and susdb files no longer exist, and the server has rebooted cleanly.
    6. I am able to add the WSUS role selecting WID, and this installs WID without any errors. At this point, simply clicking the post installation task fails, generates an empty .tmp file in my %appdata%\temp folder, and exits the MMC. 
    7. This file is blank. Absolutely empty, so I couldn't really troubleshoot any post installation tasks.
    8. Further investigation shows that the 'C:\Program Files\Update Services\Tools\' directory is gone, and isn't being
    generated.
    9. Ok... DISM /online /Cleanup-Image /Scanhealth didn't return any issues, so I copied the wsusutil out of the windows\WinSxS directory.
    10. Yey! wsusutil postinstall runs, but bombs out on the IIS portion. It generated the DB without an issue, but results
    in an IIS generation error. So, I installed WSUS on a clean 2012 install, then copied over the program files\updateServices directory to reclaim the missing files. 
    The log files show --
    2013-12-06 10:30:34  Configuring IIS...
    2013-12-06 10:30:35  Start: ConfigureWebsite
    2013-12-06 10:30:36  Configuring website on port 8530
    2013-12-06 10:30:39  System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
       at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
       at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
       at Microsoft.UpdateServices.Administration.UseCustomWebSite.ExecuteIisCustomAction(String arguments)
       at Microsoft.UpdateServices.Administration.UseCustomWebSite.Install(Int32 portNumber)
       at Microsoft.UpdateServices.Administration.UseCustomWebSite.InstallAndConfigure(IisConfiguration& iisConfiguration, Int32 newPortNumber)
       at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
       at Microsoft.UpdateServices.Administration.PostInstall.Run()
       at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
    ... ok - tripple checked that network service has permissions to .net and windows\temp folders.
    netstat -a doesn't show anything running on port 8530 ( in case this was some weird port check in use)
    Which goes back to the missing directory problem -- further net searches show that this is a reoccurring issue for some OOBE... sfc /verifyonly shows ... nothing.
    What is left to be done at this point? The missing folders from the program directory seems to be a problem for some with some users right out of the box. I have read many other threads where users just formatted and started over. Not exactly a solution
    - any help out there on this issue? Any suggestions to determine what file is missing, or generating the IIS issues?

    Part of the post install tasks wanted to download some items including the tools folder.
    Can you expand on this please. The WSUS post-install tasks do not download anything, except what is acquired during the initial synchronization with Microsoft.
    Because of my group policy the WSUS server was trying to download the updates from itself even though it was not setup yet.
    What update(s) was the WSUS server trying to "download"?
    In fact, if the WSUS Server was not setup yet (but you already had a GPO in place), then the first issue here was performing deployment steps out of order.
    But still.... except for the actual installation binaries for the WSUS Server Role on a WS2008SP2/WS2008R2 system, there's nothing the WSUS server needs to get from either Windows Update or a WSUS server. This scenario is actually discussed hundreds of times
    in this forum, but complicating matters, this thread isn't about installing WSUS V3.2 on a WS2008SP2/WS2008R2 system, it's about installing WSUS v65 on a WS2012 system, so I'm a bit confused as to what the actual installation environment is that we're discussing.
    I changed the WSUS server to get it's windows updates from Microsoft and then the post install task succeeded.
    I'd really like to get some more details about what exactly in the "post-install task" was dependent upon content from WU/WSUS.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • How do i stop photoshop cs4 from quitting unexpectedly when saving a photoshop pdf? i attempted to download the adobe drive 5 but the installation keeps failing.

    How do i stop photoshop cs4 from quitting unexpectedly when saving a photoshop pdf? i attempted to download the adobe drive 5 but the installation keeps failing. I went through the process of clicking through the how to's and the troubleshooting and came to the conclusion that I need to install the adobe drive 5 but I can not complete the installation. I may be incorrect on this so I need immediate assistance as I have poster and ad deadlines. I also tried disabling the gatekeeper and solution 3 on the troubleshooting of slow saving on photoshop.
    Any help is much appreciated!
    Thank you!

    Are you attempting to save the file to a network location instead of your local hard drive? If so, this is probably why you are encountering an issue and why Adobe Drive would be the solution. As we've documented, it is a bad idea to open from or save directly to a network source: Networks, removable media | Photoshop | CS4 and later. Drive can help you get around this by setting up an Adobe supported virtual connection to the network. Thus, if installing Adobe Drive is the solution you need and your need help with installing Drive, please post to the Downloading, Installing, Setting Up forum.
    If you are not saving to a network location, then Adobe Drive is not going to be the answer. Then we'll need to know more about the file you are saving.

  • Oracle fail safe error "FS-10784" failed to register database with group

    Hi,
    I'm getting following error while registering database to FS manager group.
    Version is -
    1) Fail safe 3.4.2
    2) Database 11.2
    3) 64 bit windows
    I executed following steps in order to create FS.
    1)     Install 11.2 software on node 1
    2)     Install 11.2 software on node 2
    3)     Install OFS 3.4.2 on node 1
    4)     Install OFS 3.4.2 on node 2
    5)     Create cluster tree from FS manager
    Below is the complete error..
    Versions: client = 3.4.1 server = 3.4.2 OS =
    Operation: Adding resource "COMPACTOR" to group "dbclusterdtc"
    Starting Time: Dec 01, 2011 18:25:31
    Elapsed Time: 0 minutes, 3 seconds
    1 18:25:31 Starting clusterwide operation
    2 18:25:32 FS-10370: Adding the resource COMPACTOR to group dbclusterdtc
    3 18:25:32 FS-10371: CSIPLAPP1DB2 : Performing initialization processing
    4 18:25:32 FS-10371: CSIPLDB1APP2 : Performing initialization processing
    5 18:25:32 FS-10372: CSIPLAPP1DB2 : Gathering resource owner information
    6 18:25:32 FS-10372: CSIPLDB1APP2 : Gathering resource owner information
    7 18:25:32 FS-10373: CSIPLAPP1DB2 : Determining owner node of resource COMPACTOR
    8 18:25:33 FS-10374: CSIPLAPP1DB2 : Gathering cluster information needed to perform the specified operation
    9 18:25:33 FS-10374: CSIPLDB1APP2 : Gathering cluster information needed to perform the specified operation
    10 18:25:33 FS-10375: CSIPLAPP1DB2 : Analyzing cluster information needed to perform the specified operation
    11 18:25:33 >>> FS-10652: CSIPLAPP1DB2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
    12 18:25:33 >>> FS-10652: CSIPLDB1APP2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
    13 18:25:33 FS-10376: CSIPLAPP1DB2 : Starting configuration of resource COMPACTOR
    14 18:25:33 FS-10378: CSIPLAPP1DB2 : Preparing for configuration of resource COMPACTOR
    15 18:25:33 FS-10380: CSIPLAPP1DB2 : Configuring virtual server information for resource COMPACTOR
    16 18:25:33 ** ERROR : 0xEA: More data is available.
    17 18:25:33 > FS-10496: Generating the Oracle Net migration plan for COMPACTOR
    18 18:25:33 ** ERROR : FS-10990: The error 0x800400EA was reported as a system error, but the error message cannot be found
    19 18:25:33 ** ERROR : FS-10757: A COM error was returned when trying to send a work item to the worker
    20 18:25:33 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource COMPACTOR
    21 18:25:33 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
    22 18:25:33 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
    23 18:25:34 FS-10488: CSIPLAPP1DB2 : Starting rollback of operation
    24 18:25:34 FS-10489: CSIPLAPP1DB2 : Completed rollback of operation
    25 18:25:34 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
    26 18:25:34 Please check your Windows Application log using the Event Viewer for any additional errors
    27 18:25:34 The clusterwide operation failed !
    Inputs are appreciable.
    Regards

    After applying patch of 3.4.2.3, still i'm facing this problem. But however there are very less errors....I think the problem is with Listener.
    1 20:34:03 Starting clusterwide operation
    2 20:34:04 FS-10370: Adding the resource COMPACTOR to group dbclusterdtc
    3 20:34:04 FS-10371: CSIPLAPP1DB2 : Performing initialization processing
    4 20:34:04 FS-10371: CSIPLDB1APP2 : Performing initialization processing
    5 20:34:05 FS-10372: CSIPLAPP1DB2 : Gathering resource owner information
    6 20:34:05 FS-10372: CSIPLDB1APP2 : Gathering resource owner information
    7 20:34:05 FS-10373: CSIPLAPP1DB2 : Determining owner node of resource COMPACTOR
    8 20:34:05 FS-10374: CSIPLAPP1DB2 : Gathering cluster information needed to perform the specified operation
    9 20:34:05 FS-10374: CSIPLDB1APP2 : Gathering cluster information needed to perform the specified operation
    10 20:34:05 FS-10375: CSIPLAPP1DB2 : Analyzing cluster information needed to perform the specified operation
    11 20:34:05 >>> FS-10652: CSIPLAPP1DB2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
    12 20:34:05 >>> FS-10652: CSIPLDB1APP2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
    13 20:34:05 FS-10376: CSIPLAPP1DB2 : Starting configuration of resource COMPACTOR
    14 20:34:05 FS-10378: CSIPLAPP1DB2 : Preparing for configuration of resource COMPACTOR
    15 20:34:05 FS-10380: CSIPLAPP1DB2 : Configuring virtual server information for resource COMPACTOR
    16 20:34:06 > FS-10496: Generating the Oracle Net migration plan for COMPACTOR
    17 20:34:06 > FS-10490: Configuring the Oracle Net listener for COMPACTOR
    18 20:34:06 >> FS-10600: Oracle Net configuration file updated: D:\APP\ORACLE\PRODUCT\11.2.0\DBHOME_2\NETWORK\ADMIN\LISTENER.ORA
    19 20:34:06 >> FS-10606: Listener configuration updated in database parameter file: M:\Datafiles\compactor\spfilecompactor.ora
    20 20:34:13 >> FS-10605: Oracle Net listener Fsldbclusterdtc created
    21 20:34:14 ** ERROR : 0x426: The service has not been started.
    22 20:34:14 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb11g_home2TNSListener for the Oracle Net listener
    23 20:34:14 ** ERROR : FS-10065: Error trying to configure the Oracle Net listener
    24 20:34:14 > FS-10090: Rolling back Oracle Net changes on node CSIPLAPP1DB2
    25 20:34:17 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource COMPACTOR
    26 20:34:17 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
    27 20:34:17 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
    28 20:34:17 FS-10488: CSIPLAPP1DB2 : Starting rollback of operation
    29 20:34:17 FS-10489: CSIPLAPP1DB2 : Completed rollback of operation
    30 20:34:17 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
    31 20:34:17 Please check your Windows Application log using the Event Viewer for any additional errors
    32 20:34:17 The clusterwide operation failed !

  • RMAN Automatic backup/recovery with oracle fail safe, windows cluster

    Hello,
    I have question,
    1) Whether it is possible to do "RMAN Automatic Backup and recovery" in environment as ?
    Environment: -
    a. Windows clustering with windows server 2003 Enterprise Edition R2 (Two Node Clustering)
    b. Shared disk ( RAID )
    c. Oracle 10g standard edition one
    d. Oracle fail safe v3.3.3 (for redundancy)
    Here we have single oracle instance operating on single database whose files are located on shared disk.
    2) If answer to above question is yes please specify if there is some good documentation to it.
    Any help regarding this will be greatly appreciated.
    Thanks in advance,
    Rahul

    You just need to make sure that the RMAN scripts are always able to connect to the target database instance whether instance runs on cluster node 1 or cluster node 2
    here, If oracle services(resources) will shift from Node1 to Node2 (due to media or any failure) during RMAN Backup then there will be break in connection, will it destroy my backup or will it get started automatically without any harm?
    and also I want to know,
    Do we need to setup another server which will have RMAN backup script running?

  • Fail Safe Virtual IP Problems

    I have a Windows 2008 R2 SP1 2 node active/passive cluster with fail safe 3.4.2 installed. I also have 11G database software installed. My problem is I am unable to successsfully add an oracle virtual IP to the oracle group within fail safe. I receive the below error when I try. Can anyone please help me in the right direction with this? I need to get this resolved so that I can add my databases to the cluster. Thank you.
    Oracle Fail Safe Manager
    FS-10890: Oracle Services for MSCS failed during the create operation
    FS-11220: Failed to create the virtual address
    FS-10012: Failed to bring the cluster resource Network Name HHVHAVELP01 online. Check the Windows event log for messages.
    FS-10726: Resource Network Name HHVHAVELP01 is in a failed state
    I don't see any message in the event log when I check...

    Hi,
    Your problem looks-like this metalink note 416339.1
    Check it on oracle support.

  • Adding the Oracle Database Resource to the Fail Safe Group

    Hi,
    I am installtin MSCS cluster for my EP system. After Adding the Oracle Database Resource to the Fail Safe Group my CI jcontrol.exe has been stopped. I tried to connect my SAPSR3DB user by sqlplus but it is giving follwoing error.
    SQL> conn SAPEPPDB
    Enter password:
    ERROR:
    ORA-12154: TNS:could not resolve the connect identifier specified
    Warning: You are no longer connected to ORACLE.
    but DB startup is running properly and DB is coming in open state properly. After that I have perform R3trans -d. following error
    C:\>R3trans -d
    This is R3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
    unicode enabled version
    2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_o
    ra_tnsname = 'EPP'"
    R3trans finished (0012).
    I added Oracle database resource to fail safe group as per installation guide.
    Please help me out.
    Regards,
    Dinesh Bhatt

    C:\>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 10.2.0.2.0 - Production on 11-APR-2010 20:39
    :38
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    Connecting to (ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=192.1.20.7)(PORT
    =1527))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 64-bit Windows: Version 10.2.0.2.0 - Produ
    ction
    Start Date                11-APR-2010 20:39:23
    Uptime                    0 days 0 hr. 0 min. 14 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   F:\oracle\EPP\102\network\admin\listener.ora
    Listener Log File         F:\oracle\EPP\102\network\log\listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.1.20.7)(PORT=1527)))
    The listener supports no services
    The command completed successfully
    listener start but without any instance.
    listerer.ora file
    This file is written by Oracle Services For MSCS
    on Sun Apr 11 10:53:11 2010
    LISTENER =
      (ADDRESS_LIST=
        (ADDRESS=
          (COMMUNITY=SAP.WORLD)
          (PROTOCOL=TCP)
          (HOST=192.1.20.7)
          (PORT=1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    ADMIN_RESTRICTIONS_LISTENER = on
    Fsloracleepp =
      (ADDRESS_LIST=
        (ADDRESS=
          (PROTOCOL=IPC)
          (KEY=EPP)
        (ADDRESS=
          (PROTOCOL=IPC)
          (KEY=EPP.WORLD)
        (ADDRESS=
          (COMMUNITY=SAP.WORLD)
          (PROTOCOL=TCP)
          (Host=192.1.20.43)
          (Port=1527)
    SID_LIST_Fsloracleepp =
      (SID_LIST=
        (SID_DESC=
          (SID_NAME=EPP)
          (ORACLE_HOME=F:\oracle\EPP\102)
    STARTUP_WAIT_TIME_Fsloracleepp = 0
    ADMIN_RESTRICTIONS_Fsloracleepp = on
    TRACE_LEVEL_Fsloracleepp = OFF
    CONNECT_TIMEOUT_Fsloracleepp = 10
    dbms_sid added
    please help.
    Dinesh Bhatt

  • Fail Safe adding database to group gives error "FS-10006: Unable to open.."

    Environment:
    Fail Safe 3.4.2
    Oracle 11.2.0.1 64bit
    Windows 2008 Server 64bit
    Two nodes in an active/passive cluster using windows clustering and oracle fail safe.
    Problem:
    We have created the windows cluster, installed fail safe on both clustered nodes, installed the database software, verified the cluster, created a group and added a virtual address to the group. We also managed to verify the stand alone database instance without any issues. However, when we try to add the database to the group we get the following errors:
    Versions:  client = 3.4.1    server = 3.4.2    OS = 
    Operation:   Adding resource "THORD" to group "EO_THORD_GRP" 
    Starting Time:   Jul 26, 2010   16:23:04
    Elapsed Time:   0 minutes, 2 seconds
    1   16:23:04  Starting clusterwide operation
    2   16:23:05  FS-10370: Adding the resource THORD to group EO_THORD_GRP
    3   16:23:05  FS-10371: ClusterNode1 : Performing initialization processing
    4   16:23:05  FS-10371: ClusterNode2 : Performing initialization processing
    5   16:23:05  FS-10372: ClusterNode1 : Gathering resource owner information
    6   16:23:05  FS-10372: ClusterNode2 : Gathering resource owner information
    7   16:23:05  FS-10373: ClusterNode1 : Determining owner node of resource THORD
    8   16:23:05  FS-10374: ClusterNode1 : Gathering cluster information needed to perform the specified operation
    9   16:23:05  FS-10374: ClusterNode2 : Gathering cluster information needed to perform the specified operation
    10  16:23:05  FS-10375: ClusterNode1 : Analyzing cluster information needed to perform the specified operation
    11  16:23:05   >>> FS-10652: ClusterNode1 has Oracle Database version 11.2.0.1 installed in OraDb11g_home1
    12  16:23:05   >>> FS-10652: ClusterNode2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home1
    13  16:23:05  FS-10376: ClusterNode1 : Starting configuration of resource THORD
    14  16:23:05  FS-10378: ClusterNode1 : Preparing for configuration of resource THORD
    15  16:23:05  FS-10380: ClusterNode1 : Configuring virtual server information for resource THORD
    16  16:23:05    ** ERROR : 0x138F: The cluster resource could not be found.
    17  16:23:06    ** ERROR : FS-10006: Unable to open the resource
    18  16:23:06    ** ERROR : FS-10012: Failed to bring the cluster resource  online. Check the Windows event log for messages
    19  16:23:06    ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource THORD
    20  16:23:06    ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
    21  16:23:06    ** ERROR : FS-10497: Starting clusterwide rollback of the operation
    22  16:23:06  FS-10488: ClusterNode1 : Starting rollback of operation
    23  16:23:06  FS-10489: ClusterNode1 : Completed rollback of operation
    24  16:23:06    ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
    25  16:23:06  Please check your Windows Application log using the Event Viewer for any additional errors
    26  16:23:06  The clusterwide operation failed !
    FS-10006: Unable to open the resourceAll the cluster resources seem to be online. We're all out of ideas here, can someone please shead some light on this or have any ideas how we can go on about this.
    Your help is highly appreciated.
    Thanks

    I am getting into the issue (step-6) when I run standalone resource verify after successful step-5 and need your advice.
    I will give you information about the infrastructure -
    NODE1-2K8-ORADBND1
    NODE2-2K8-ORADBND2
    Cluster IP-
    Virtual IP on NODE1 and NODE2 host file -
    OS - Windows 2008 R2 64 bit
    Oracle Database - 11gR2
    Oracle FailSafe - 3.4.1.6
    Oracle SID- ORA11
    (ORA11 is up and running on NODE1 active node while running add to group option from - Groups/Standalone Resources to verify the instance and it gets error)
    Here is the error log -
    Versions: client = 3.3.3 ; server = 3.4.1 ; OS =
    Operation: Adding resource "ORA11" to group "Available Storage"
    Starting Time: Sep 02, 2010 12:50:06
    Elapsed Time: 0 minutes, 1 seconds
    1 12:50:06 Starting clusterwide operation
    2 12:50:06 FS-10370: Adding the resource ORA11 to group Available Storage
    3 12:50:06 FS-10371: 2K8-ORADBND1 : Performing initialization processing
    4 12:50:06 FS-10371: 2K8-ORADBND2 : Performing initialization processing
    5 12:50:07 FS-10372: 2K8-ORADBND1 : Gathering resource owner information
    6 12:50:07 FS-10372: 2K8-ORADBND2 : Gathering resource owner information
    7 12:50:07 FS-10373: 2K8-ORADBND1 : Determining owner node of resource ORA11
    8 12:50:07 FS-10374: 2K8-ORADBND1 : Gathering cluster information needed to perform the specified operation
    9 12:50:07 ** ERROR : FS-10791: The Oracle Database resource provider failed while gathering cluster information for resource ORA11
    10 12:50:07 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
    11 12:50:07 Please check your Windows Application log using the Event Viewer for any additional errors
    12 12:50:07 The clusterwide operation failed !
    Thanks for your help!

Maybe you are looking for