Installation of HANA SP7 failed with hdbnsutil call failed.

Hello,
I am trying to install HANA to play around with it a little. I tried to install using the tool hdblcmgui since the old method was deprecated and during the Installing SAP HANA database step, the install fails with the following error message.
18:53.727 - ERR :     Installation of SAP HANA Database failed
17:18:53.727 - INFO:       Installation failed
17:18:53.727 - INFO:         error installing
17:18:53.727 - INFO:           Cannot create Instance
17:18:53.727 - INFO:             Cannot create instance
17:18:53.727 - INFO:               Cannot create SecureStore
17:18:53.727 - INFO:                 Starting external program /usr/sap/RSW/HDB00/exe/hdbnsutil
17:18:53.727 - INFO:                   Command line is: /usr/sap/RSW/HDB00/exe/hdbnsutil -createSecureStore
17:18:53.727 - INFO:                 Cannot execute program /usr/sap/RSW/HDB00/exe/hdbnsutil: /usr/sap/RSW/HDB00/exe/hdbnsutil: No such file or directory
17:18:53.727 - INFO:                 hdbnsutil call failed
When I look in the directory /usr/sap/RSW/HDB00/exe
The files hdbnsutils, hdbparam and possibly others were never created.
hana-db-001:/usr/sap/RSW/HDB00/exe # ls -l
total 16
dr-xr-xr-x 7 rswadm sapsys 4096 May 8 15:45 Python
dr-xr-xr-x 2 rswadm sapsys 4096 May 8 15:45 config
lrwxrwxrwx 1 rswadm sapsys   41 May 8 15:44 lexicon -> ../../../global/hdb/custom/config/lexicon
-r--r--r-- 1 rswadm sapsys 549 Mar 7 09:41 manifest
dr-xr-xr-x 7 rswadm sapsys 4096 May 8 15:45 python_support
Does anyone have any ideas?
Message was edited by: Tom Flanagan

Hi Johan,
Yes, the downloaded file was corrupted. I checked the file against the checksum and noticed that it didn't match. So I downloaded everything again and this time checked all files and it installed without any issue.
Good luck

Similar Messages

Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 500

I get the following error when trying to connect to my BlazeDS Java server from Flex application. Flex application is on localhost:80, blazeDS on tomcat localhost:8080. Please help!
createUser();faultHandler():(mx.messaging.messages::ErrorMessage)#0
body = (Object)#1
clientId = (null)
correlationId = "9FFDEBE8-EAD0-F3D9-8E9B-E3D7D7F5AE79"
destination = ""
extendedData = (null)
faultCode = "Client.Error.MessageSend"
faultDetail = "Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 500: url: 'http://77.93.202.150:8080/QuizDS/messagebroker/amf'"
faultString = "Send failed"
headers = (Object)#2
messageId = "98F54E19-7B0D-DCB9-4B86-E3D7D84E484F"
rootCause = (mx.messaging.events::ChannelFaultEvent)#3
    bubbles = false
    cancelable = false
    channel = (mx.messaging.channels::AMFChannel)#4
      authenticated = false
      channelSets = (Array)#5
      connected = false
      connectTimeout = -1
      enableSmallMessages = true
      endpoint = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      failoverURIs = (Array)#6
      id = (null)
      mpiEnabled = false
      netConnection = (flash.net::NetConnection)#7
        client = (mx.messaging.channels::AMFChannel)#4
        connected = false
        maxPeerConnections = 8
        objectEncoding = 3
        proxyType = "none"
        uri = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      piggybackingEnabled = false
      polling = false
      pollingEnabled = true
      pollingInterval = 3000
      protocol = "http"
      reconnecting = false
      recordMessageSizes = false
      recordMessageTimes = false
      requestTimeout = -1
      uri = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      url = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      useSmallMessages = false
    channelId = (null)
    connected = false
    currentTarget = (mx.messaging.channels::AMFChannel)#4
    eventPhase = 2
    faultCode = "Channel.Connect.Failed"
    faultDetail = "NetConnection.Call.Failed: HTTP: Status 500: url: 'http://77.93.202.150:8080/QuizDS/messagebroker/amf'"
    faultString = "error"
    reconnecting = false
    rejected = false
    rootCause = (Object)#8
      code = "NetConnection.Call.Failed"
      description = "HTTP: Status 500"
      details = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      level = "error"
    target = (mx.messaging.channels::AMFChannel)#4
    type = "channelFault"
timestamp = 0
timeToLive = 0

halodev:
I made a CF/Flex site based on the Flexstore sample app,
using a database instead of XML as the data source; in case you
want to see it:
http://www.timos.com/dg/flex/DilemmaGames.html
At first I had troubles similar to what you describe;
initially, part of the problem was that my hosting company had not
yet upgraded to CF 7.02. One other thing I had to correct: when you
upload to your server, upload the entire ‘bin’ (or
whatever your output folder is) minus the debug SWF.
If it would help with other issues, contact me and I will be
glad to make my project code available to you. Good luck.
Carlos
[email protected]

Has Apple said anything about a problem with FaceTime calls failing?

I have tried FaceTime on three different devices, called four different people and every calls fails. Tried the calls on wifi as well as AT&T data...nothing works!!! My kids want to FaceTime with their grandparents...help!!!

robdrage wrote:
i have tested several of my devices as follows
ios 6.1 to ios 6.1 works
ios 6.1 to ios 7.1 works
ios 7.0.6 to ios 6.1 works
ios 7.0.6 to ios 7.1 works
and all work both directions.
Try logging out on both devices and logging back in
It's most likely not a worldwide or even country problem. Apple, like all big companies will host they're services on multiple servers.

Client installation fails with error GetSSLCertificateContext failed with error 0x87d00281

Hi
Site is SCCM 2012 R2
I am pushing SCCM client manually to a Windows Server 2012 client and it is failing with below errors
GetSSLCertificateContext failed with error 0x87d00281
ccmsetup 02/05/2015 12:04:11 AM
6428 (0x191C)
GetHttpRequestObjects failed for verb: 'GET', url: 'HTTPS://SCCMserver.GROUP.COM/CCM_Client/ccmsetup.cab'
ccmsetup 02/05/2015 12:04:11 AM
6428 (0x191C)
DownloadFileByWinHTTP failed with error 0x87d00281
ccmsetup 02/05/2015 12:04:11 AM
6428 (0x191C)
CcmSetup failed with error code 0x87d00281 ccmsetup
02/05/2015 12:04:11 AM 6476 (0x194C)
Please advice..

0x87d00281 = "No certificate matching criteria specified"
Have you deployed proper client auth certs to the client?
Can you please post the entire relevant snippet of the log file? Starting with the first error code encountered is meaningless because now we can't see what happened before which is often the root cause of the issue culminating in the error message.
Have you deployed the proper server auth certs to the MP and DP?
Jason | http://blog.configmgrftw.com | @jasonsandys

Service Clients failing with "The request failed with HTTP status 401: Unauthorized"

Hello,
We have implemented a solution using the SSRS web service clients as produced by the WSDLs. We have deployed the application on one server, and via the code we are calling the SSRS on another server (i.e., not using ReportViewer, etc.). We do
know that the user signed in has permissions since from the same staging server the Report Manager and Reports can both be accessed and viewed. However, it's only when we run the application and attempt to execute a report on the remote SSRS server that
we get the following error:
The request failed with HTTP status 401: Unauthorized. at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String
methodName, Object[] parameters) at AMC.AssetTracker.Reporting.ReportExecution.ReportExecutionService.LoadReport(String Report, String HistoryID) at AMC.AssetTracker.Reporting.Report.GetReportByteArray() at AMC.AssetTracker.Reporting.Report.get_ReportStream()
at AMC.AssetTracker.Reporting.Report.get_GetWebUIDisplay() at AMC.AssetTracker.UserControls.AssetTrackerMain.btnGenerate_Click(Object sender, EventArgs e)
The credentials we have tried are the DefaultCredentials. One question I have is how do you use custom credentials if neither the DefaultCredentials or the DefaultNetworkCredentials work? Also, this service call does have to go through an ISA
server before reaching the SSRS server.
Any ideas?
Thanks.

It sounds like Kerberos authentication is needed in your situation since it's not on the same box.
There is a one-hop limit with NTLM authentication.
For more info please see the link below:
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/452e9627-cd8e-4709-bdd0-fbafcf9fd719
Hope this helps!
Thanks, Michael Mei

RAC Install fails with "OCR upgrade failed with (-1073741819) on 10.2.0

I am trying to install RAC 10.2.0 with two Server 2003 R2 nodes connected to a fiber channel SAN. I have set up the shared storage, created the extended partitions, and setup the unformatted no drive letter volumes. Both servers see the unformatted volumes (and no others do). The preinstallation checks work fine and the installations works fine until the first configuration assistant runs. That would be the "Oracle Clusterware Configuration Assistant". It tries to run crssetup.config.bat and fails on step 3 (configuring OCR Repository) with
ocr upgrade failed with (-1073741819)
If I uninstall clusterware and try again it will not show the OCR and Voting disks as available disks until I delete the volumes and partitions and recreate them. I have run the precheck batch files and they show everything as good as well. When I define the OCR and Voting drives in the clusterware setup I do not select format or assign drive letter. Every time I try to do the install I get the exact same error.
Is there anything I am missing or some trick or patch I may not have done?

Take a look at this notes!!
Note 341214.1 - How To clean up after a Failed Oracle Clusterware Installation on Windows
Note 388730.1 - Oracle RAC Clusterware Installation on Windows Commonly Missed / Misunderstood Prerequisites
Rgrs,
Paulo.

Scheduling a Deski report fails with error message: "Failed to get property

Hi,
We have created few Desktop Intelligence report. Now when these report are schedules to be refreshed weekly (on Sunday), it fails with the following error message:
"Failed to Get Property"
Have tried to refresh the reports manually in Full Client too but the report fails there too.
Have checked for the connection information. The servers are up and running.
Have tried to re-create the connection and even tried to re-import and export the Universe.
If we rename the report and save it and export, it works fine. Can not try this workaround as have more that 500 reports.
Please suggest.
regards,

Hi Maria,
usually the message "Failed to Get Property" is followed by an item name such as SI_FILE, or SI_VARIABLE, or SI_USE_ORIGINALDS, and so on.
Could you please specify as much information coming from the error message as you can?
Furthermore, is this issue happening with any Desktop Intelligence reports you schedule?
Are the reports using the same Universe?
Which DB are you using?
Regards,
Samanta F.

Adworker fails with "Error calling FNDLOAD function" for patch 7303033

hi,
we have some problems applying patch 7303033 (12.1.2) for EBS:
1. installed ebs R12 12.1.1 with 11.0.7 database;
2. applied patch R12.AD.B.DELTA.2 Patch 8502056
3. trying to apply patch 7303033
after ~6 hours of runnig one of worker failed.
worker log:
Loading data using FNDLOAD function.
FNDLOAD APPS/***** 0 Y UPLOAD @ONT:patch/115/import/ontpmdef.lct @ONT:patch/115/import/US/ontsys.ldt -
Connecting to APPS......Connected successfully.
Calling FNDLOAD function.
Returned from FNDLOAD function.
Log file: /global/spare/apps/dev_apps/apps/apps_st/appl/admin/DEV/log/US_ontsys_ldt.log
Error calling FNDLOAD function.
4. i have stopped the adpatch instalation adn ran adadmin->compile apps schema
5. after compiling apps schema i re-run adpatch trying to continue the patch apply
the following error occured:
AutoPatch error:
The following ORACLE error:
ORA-00942: table or view does not exist
occurred while executing the SQL statement:
UPDATE FND_INSTALL_PROCESSES
SET control_code = 'W'
WHERE worker_id > 0
AutoPatch error:
Error running SQL and EXEC commands in parallel
The "Error running SQL and EXEC commands in parallel" is because i have selected to many parallel workers (32) ,
but what about the FND_INSTALL_PROCESSES? can it be recreated..using adctrl?
Can i continue from this step or should i apply patch from the beginning?

hi,
the log says:
Uploading from the data file /global/spare/apps/dev_apps/apps/apps_st/appl/ont/12.0.0/patch/115/import/US/ontsys.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/global/spare/apps/dev_apps/apps/apps_st/appl/ont/12.0.0/patch/115/import/ontpmdef.lct(120.3.12010000.1), /global/spare/apps/dev_apps/apps/apps_st/appl/ont/12.0.0/patch/115/import/US/ontsys.ldt) to staging tables
Dumping LCT file /global/spare/apps/dev_apps/apps/apps_st/appl/ont/12.0.0/patch/115/import/ontpmdef.lct(120.3.12010000.1) into FND_SEED_STAGE_CONFIG
Dumping LDT file /global/spare/apps/dev_apps/apps/apps_st/appl/ont/12.0.0/patch/115/import/US/ontsys.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (OE_SYS_PARAMETER_DEF_B CUSTOMER_RELATIONSHIPS_FLAG , OE_SYS_PARAMETER_DEF_B OE_CC_CANCEL_PARAM ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for OE_SYS_PARAMETER_DEF_B: PARAMETER_CODE = CUSTOMER_RELATIONSHIPS_FLAG, ORA-06508: PL/SQL: could not find program unit being called
Error loading seed data for OE_SYS_PARAMETER_DEF_B: PARAMETER_CODE = AUDIT_TRAIL_ENABLE_FLAG, ORA-06508: PL/SQL: could not find program unit being called
Error loading seed data for OE_SYS_PARAMETER_DEF_B: PARAMETER_CODE = MASTER_ORGANIZATION_ID, ORA-06508: PL/SQL: could not find program unit being called
Error loading seed data for OE_SYS_PARAMETER_DEF_B: PARAMETER_CODE = COMPUTE_MARGIN, ORA-06508: PL/SQL: could not find program unit being called
Error loading seed data for OE_SYS_PARAMETER_DEF_B: PARAMETER_CODE = FREIGHT_RATING_ENABLED_FLAG, ORA-06508: PL/SQL: could not find program unit being called
Thank you

Odbc connection test success but can't link the database to oracle with 1013 call failed error.

i am using my MS Access 2013 to connect with my oracle database. I created the odbc link and successfully have connection test pass. However i can;t link the database with my MS access. When i am using different software (mapinfo), i am able to connect to oracle database. The error is"1013: user requested cancel of current operation"

In MS access, i open the external data and select odbc. Select my odbc link created previously, enter the password and after a while the error message pop up.
But if i am using another tools, such as SQL Developer or Mapinfo, i will able to connect to oracle database using the same odbc link.

[SOLVED] Boot fails with "ata4: SRST failed (errno = -16)"

I have desktop that has four disks. They have similar three partitions sitting on RAID.
/boot and swap are on RAID1
/ is on RAID5.
This worked well until a couple of weeks ago I noticed I couldn't connect to it via SSH. I went onsite and the desktop was humming but I couldn't get picture on the screen and alt + sysrq + REISUB did nothing. I shut it down by pressing power button and started it again. It gave me following errors:
ata4: SRST failed (errno = -16)
After a while there was
reset failed, give up
I restarted the machine and went to BIOS. There was only two of four disks visible. I shut the computer down, removed the power cord and then plugged it back in. This time BIOS showed all the disks there. I tried to boot up Arch and got the following.
Booting the kernel.
running early hook [udev]
running hook [udev]
Triggering uevents
mounting '/dev/md3' on real root # md3 is the RAID 5 device containing root
mount: you must specify the filesystem type
You are now being dropped into an emergency shell.
sh: can't access tty; job control turned off
After that I tried to chroot from USB installation disk. First I check the RAID devices and see that in md1 (/boot) all seems to be ok. In md2 (swap) half of the partitions are missing. I'm not sure how to interpret the last one.
cat /proc/mdstat
Personalities : [raid1]
md1: active raid1 sdd1[3] sdb1[1] sda1[0] sdc1[2]
1048564 block super 1.0 [4/4] [UUUU]
md2: active raid1 sdb2[1] sda2[0]
2096116 block super 1.2 [4/2] [UU__]
md3: inactive sdb3[1](S) sda3[0](S) sdd3[4](S) sdc3[2](S)
608169984 block super 1.2
unused devices: <none>
I remove those devices and try to recreate them. md1 says it starts with four drives. md2 starts with 2 driver out of 4. And then the last one.
mdadm --assemble /dev/md3 /dev/sd[a-d]3
mdadm: /dev/md3 assembled from 2 drives - not enough to start the array.
Has anyone any idea where did the two partitions go? I ran SMART-tests to all four drives in long mode and all of them passed the tests.
I use GPT partitioning table, UEFI and Syslinux if it matters.
Last edited by Tha-Fox (2013-02-23 01:35:05)

I just booted to chroot environment and checked that all the partitions show up all right. Below is output of one disk and all the four disks give similar info.
gdisk -l /dev/sdd
GPT fdisk (gdisk) version 0.8.6
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sdd: 312581808 sectors, 149.1 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 8B9EBB89-366E-4C81-8916-F61CB08273DB
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 312581774
Partitions wil be aligned on 2-sector boundaries
Total free space is 2203245 sectors (1.1 GiB)
Number Start (sector) End (sector) Size Code Name
1 34 2097185 1024.0 MiB FD00 Linux RAID
2 2097186 6291489 2.0 GiB FD00 Linux RAID
3 6291490 310378529 145.0 GiB FD00 Linux RAID

Flash builder 4.5.1 ios build fails with error map failed

I have built several test app with flash builder 4.5 and now 4.5.1. I am working on an app for ipad, but when I run a test build it runs for several minutes as if it is going to create the ipa, but then error out and displays the following error message:
message title: Problem occured
'Launching [name of configuration] has encountered a problem.
Error occurred while packaging the application:
Map failed
that's it, no other reference. I have searched for any reference to this problem and haven't been able to find one. When I first packaged a much simpler version of the app, it created an ipa just fine.
Can someone help me.
Thanks

When I was try to build a debug iOS version, I got this error, too.(release version is ok)
For the project I was use Flex SDK 4.5.1 and AIR 3 SDK.
blew is the log, I copyed from {flash builder workspace}/.metadata/.log
!STACK 0
java.lang.Exception
          at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1010)
          at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
          at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
          at com.adobe.flexide.multiplatform.ios.packaging.IPAPackager.create(IPAPackager.java:220)
          at com.adobe.flexide.multiplatform.ios.launching.IOSOnDeviceLaunchHandler.doPackage(IOSOnDev iceLaunchHandler.java:283)
          at com.adobe.flexide.multiplatform.ios.launching.IOSOnDeviceLaunchHandler.launch(IOSOnDevice LaunchHandler.java:181)
          at com.adobe.flexide.launching.multiplatform.MultiPlatformLaunchDelegate.launch(MultiPlatfor mLaunchDelegate.java:180)
          at com.adobe.flexide.launching.AbstractFlexLaunchDelegate.launch(AbstractFlexLaunchDelegate. java:238)
          at com.adobe.flexide.launching.AbstractFlexLaunchDelegate.launch(AbstractFlexLaunchDelegate. java:132)
          at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:853)
          at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:702)
          at org.eclipse.debug.internal.ui.DebugUIPlugin.buildAndLaunch(DebugUIPlugin.java:923)
          at org.eclipse.debug.internal.ui.DebugUIPlugin$8.run(DebugUIPlugin.java:1126)
          at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
!ENTRY com.adobe.flexbuilder.project 4 43 2011-11-22 22:10:54.816
!MESSAGE Error occurred while packaging the application:
Map failed
even I try to change sdk with FLEX 4.5 and AIR 2.6, the error was still here.
And I try to build debug project in Flash Pro. It was OK.
So I think it was an flashbuilder bug.
My project only 137Megabytes

Flex4 Zend AMF error - NetConnection.Call.Failed: HTTP

Hi,
I'm working with FLEX 4 (developing in flash builder 4 plugins for eclipse) and PHP Zend Framework v 1.9.
When I run the application from the flash builder the AMF comunication work fine, but when I try to run directly from URL in a browser I got the following error:
Send failed
Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: 'http://localhost/Project-debug/gateway.php'
I think that I get this error since I have update my flash builder plugin.... previos version of my .swf project didn't give my this issue.
Somebody can help me? I don't realy have any idea how to solve this problem.
P.S.
I don't have services-config.xml file in my project cause the amf zend samples that I followed don't say to create it, somebody knows why flex 4 doesn't need it?
Thanks

The MessageBroker servlet is not installed properly. The context-root of the two Tomcat LC DS installs must be different. Test hitting the context-root Flex_App on both machines (http://hostIP:8080/Flex_App). If the context-root is valid you will hit the index.html page of the valid context-root which looks like this...
Welcome to Adobe LiveCycle Data Services ES2 Version 3!
This is an empty LiveCycle Data Services ES application that serves as a template for creating your custom application.
Visit the product page for documentation and further information.
Steve

Random Net connection call failed errors

Hi All,
I've built a Flex application which is calling coldfusion CFC through remote objects in order to retrieve data.
2 days ago, I've updated the server with coldfusion 9 and my issue is that I have sometime those kind of error messages :
[RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Failed"]
[RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Status 503"]
[RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Status 500"]
[RPC Fault faultString="error" faultCode="Channel.Call.Failed" faultDetail="NetConnection.Call.Failed: HTTP: Status 504"]
[RPC Fault faultString="Send failed" faultCode="Client.Error.MessageSend" faultDetail="Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: 'http://servername/flex2gateway/'"]
It was also happening on Coldfusion 8 and even on one other sever with another application.
(but same logic Flex -> remote Objects -> CFC -> sql2005).
When we were still running CF8 I added this <add-no-cache-headers>false</add-no-cache-headers> to the service-config.xml file but with no success.
I do not know if it's related to this but I also sometimes have this error message :
[RPC Fault faultString="Channel disconnected" faultCode="Client.Error.DeliveryInDoubt" faultDetail="Channel disconnected before an acknowledgement was received"]
Most if time the application is running fine, but I want to avoid this errors.
For example yesterday I recieved +- 50 times the NetConnection.Call.Failed error and 20 times Channel disconnected error.
Do not hesitate to ask if I need to post CF9 settings summary or something else.
Thank you for your help.
Aubry

That's a pity, but thanks for the reply.
Dik

12c agent install fails with error - The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed

Hi,
I am trying to install 12c agent on windows 7 64 bit server by following m.note .
It is failing with Agent Configuration failed, please see below error message.
INFO: length of temp is2
INFO: Return value:C:\/Oracle/12.1.0.3.0_AgentCore_233/core
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log C:\Oracle\12.1.0.3.0_AgentCore_233\core\install\logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode finished for action: configure
INFO:
INFO: You can see the log file: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\cfgtoollogs\oui\configActions2014-10-03_08-48-15-AM.log
INFO:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233>exit /b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\oui\bin\runConfig.bat ORACLE_HOME=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0 RESPONSE_FILE=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent Configuration Failed
Thanks,

Looks like , J2EE is having a problem connecting to the DB.Pls. chk. the following
-If you have configured the loop-back adapter , if installing on a local system & updated the /etc/host file with your ip address and host name.
or if the system is part of some n/w group and has ip address assigned ?
-Jdk 1.4 version is installed in your system
-Enough free Disk space available in the system
-How much RAM your system has which windows version you are using ?
-Is the DB is coming up properly ? its error related to this. check the logs.
-If the ports used by sap install / run used by other services running on the system ? & user have admin. privileges on the system .
Pls. update with your findings on above same , for the step next ...
Thanks ,
Uppal

Channel.Call.Failed

Hi All,
     We are using Flex 3 and BlazeDS in my project. I am getting following error when user performs some backend calls. After some time we are not getting any error for the same backend call. It is happening very randomly
fault = (mx.rpc::Fault)#243
    errorID = 0
    faultCode = "Channel.Call.Failed"
    faultDetail = "NetConnection.Call.Failed: HTTP: Failed"
    faultString = "error"
    message = "faultCode:Channel.Call.Failed faultString:'error' faultDetail:'NetConnection.Call.Failed: HTTP: Failed'"
    name = "Error"
    rootCause = (Object)#244
      code = "NetConnection.Call.Failed"
      description = "HTTP: Failed"
      details = "https://<server>/<context root>/fmb/amfsecure"
      level = "error"
Kindly suggest me a solution for this.
Thanks,
Pradeep.

After a lots of research, I found following request is send from Flex to Server as:
03-Feb-11 04:27:03 DEBUG Logger Endpoint.AMF : Deserializing AMF/HTTP request
Version: 3
(Message #0 targetURI=null, responseURI=/73)
    (Array #0)
      [0] = (Typed Object #0 'flex.messaging.messages.CommandMessage')
       operation = 12
        correlationId = ""
        body = (Object #1)
        messageId = "1EDDFEEA-C98A-B355-332F-EAD8A753232C"
        clientId = null
        timeToLive = 0
        timestamp = 0
        headers = (Object #2)
          DSId = "19FCCA68-EB08-EFBE-EEDA-4C8582B5A291"
        destination = ""
Flex sends CommandMessage.DISCONNECT_OPERATION request to Server.
I want to know exactly why/when this request is send to server.
Looking forward to a positive response

Installation of HANA SP7 failed with hdbnsutil call failed.

Similar Messages

Maybe you are looking for