Installation of HP Deskjet 1000 J110 Series

Dear Guys,
I bought an HP Deskjet 1000 Printer J110 Series. Unfortunately, the installation CD that came with the Printer is for Mac OS X Versions 10.5 and 10.6 and i can't install it onto my MacBook Pro using the Mac OS X 10.8.4 Version. I have also tried to search on the website any possible solutions and have come along none.
Is any one out there who can help out?
Thanks
Maurice

When I connect the printer to the laptop, with Internet connected, the computer tries to automatically search for availability of printer drivers. However, at the end of the search a message is retuned that there are no available drivers for installation of the said printer and that I should check software update later.

Similar Messages

My Deskjet 1000 J110 series is cutting off bottom parts of sentences?

My Deskjet 1000 J110 series is cutting off bottom parts of sentences. I have not had this problem in the past. It only does it to a few sentences & my headers.
What could be causing this and what can I do about it?

Hi IlianaGrace96,
There are several things that can cause your problem. I would start by reviewing the following HP Consumer Support document:
Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems
1. Perform a hard reset on the printer. Unplug the power cord from the back. Leave it out for 30 seconds and then plug it back in.
2. Use the automated tool to align the cartridges.
3. Use the automated tool to clean the cartridges.
4. Manually clean the cartridges with a lint free cloth and water.
5. Try soaking your printheads in semi warm water for about 5 minutes.
I hope this helps.
Regards,
BethenyF
Click the Thumbs up to say thanks. Mark Accepted Solution if the solution solves your issue.

HP Deskjet 1000 J110 Series Printer

When I try to print something, I get an error message on my HP computer saying: "Printer in an error state." The pop-up window for the printing process lists: "Status: Error - No Toner/Ink." I have just had both ink cartridges refilled, so I'm at a loss for what's going on here. How do I get the printer out of this "error state" and get the printer to indicate that I have a full complement of ink? Please Help!

Hi JaBojo,
Welcome to the HP Forums!
I have examined your post on a cartridge-related error message, and I would be happy to assist you!
Please follow this document on An 'Ink Cartridge Problem' Message Displays on the Computer.
If you come to the point of replacing a defective cartridge, I must note that it is your choice if you want to refill your ink cartridges, but be aware that the print quality and reliability may not be as good as the original HP.
If you are still having problems after replacing your ink cartridge, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
Thank you for visiting the HP Forums, and I am looking forward to your reply!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

HP Deskjet 1000 J110 - Pausing causes long print times

Hi everyone. My company just bought the Deskjet 1000 J110 series for our shipping computer.
Every time we try to print, the machine pulls the paper in a few inches and pauses while the power light is flashing. It will sit like this for a few moments before printing a few more lines and pausing again (with the power light flashing.) It repeats this process several times. Sometimes, maybe only one line will print, other times it will be more. Eventually, the entire page IS printed and looks just fine with crisp readable text or barcodes with no visible errors. However, it takes anywhere between 1 and 3 minutes to print a full page. This happens whether it is a shipping barcode, a body of text from Word, or even the ‘Print Test Page’ option under the printer properties. Seriously, it took me ten minutes to print six pages today, and they were each only about a half a page of content.
Does anyone have any suggestions? Any and all help is greatly appreciated.
I’ve included some system information for reference.
Thanks!
Microsoft Windows XP
Professional
Version 2002
Service Pack 3
Dell Optiplex 740
AMD Athlon 64 X2 Dual
Core Processor 3800+
1.00 GHz, 960 MB of RAM
This question was solved.
View Solution.

Hi,
The symptoms you described will most likely indicate a communication issue.
Unplug the USB cable from the back of the printer, then try printing an hardware self test print as following:
While holding the power button pressed, open and close the Cartridge Access Door for 10 times, then release the power button.
If the self test being printed as it should, try plugging the USB cable into a different USB port, make sure to connect it directly to a free USB port on the back of your PC and not by using any USB hub.
If there is still no change, i would suggest you to try using a differenct USB cable and check for any change.
If the same appears while printing a self test with no USB attached, it might be a cartridge problem affecting the device.
If so, contact the local HP Call Center in order to troubleshoot the problem and provide any required service according.
You may find the local number listed below:
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Why doesn't my Macbook Air print with my HP desk jet 1000 J110 series printer?

I have tried to print pictures and documents on Pages from my MacBook Air with my HP deskjet 1000 J110 series printer but it doesn't happen. The printer connects all right and doesn't show a problem whilst I am choosing the format I want my document/picture to be printed but after I click Print, a little icon representing the printer pops up in the bottom but after a second or two, it disapppears leaving me with no printouts. Why is it happening and what are the solutions?

OS X Mavericks: Reset the printing system

HP Deskjet 1000 j110 sleep mode on Mac OSX 10.7.2

Just bought a Deskjet 1000 j110 for an iMac. I have it hooked up and updated drivers loaded (as of 11/21/11). When I let the printer sit idle, it appears to go into a sleep mode (power button fades in and out). When attempting to print, I see "Waiting for printer to become available" in the print queue window. It remains this way and never actually prints. I hit the power button, thinking that pressing the it would bring the printer out of sleep mode, but it didn't work.
My work around is to physically pull the power cable from the printer and reconnect it. Once that happens, the HP utilities see it again, and the print job goes through. Obviously, this is not the way it should work. It seems there is something wrong with the driver on Mac OSX 10.7.2 - I would think there would be code to 'waken' the printer and submit the job, but apparently not.
Does anyone have any ideas on what is wrong with this configuration and/or driver?

Hello cfournival,
As this is an older thread I want to verify that you are using the latest driver and sofware for Mac OSX.
You can find information about it here
Software & Driver Downloads - HP Deskjet 1000 Printer - J110a
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Problem with HP Deskjet 1000 J110 cut photo

  Hello,
With any format the document or image is cut to instill
about 2 CM, despite having tried with different programs, also to take away
edges of the press, etc., etc., is that the printer does not estisce those last cm? original:
http://postimg.org/image/dwyzuvoh5/
printed: http://postimg.org/image/wodllbdzb/  Tancks.

@pz1,
Welcome to the forums!
I understand your print jobs are printing out with partial printing on them, and I hope to help!
I am curious to know if the issue could be within the printer hardware itself, and would like you to print out a diagnostic test page to find out.
Please click this link, follow all of the steps and let me know the results:
Fixing Print Quality Problems for the HP Deskjet 1000 (J110), 2000 (J210), 3000 (J310), and HP Deskj...
If you wish to send me a "thank you" for my response to help, click the thumbs up  below!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Deskjet 1000 J110 stopped checking ink levels

Hi
I have a Deskjet 1000 J110 and I'm running Windows 7.
The HP software used to allow me to check ink levels, now it doesn't. I checked them no more than 2 weeks ago without a problem. Now, when I tried to check them, the option simply wasn't there. I'm not sure, but I think the shortcut on the HP menu folder is directing me to the Control Panel printers folder, not to the HP software like it used to.
Anyone has any idea what the problem might be?
Cheers!
This question was solved.
View Solution.

Hi seileach,
Welcome to the HP Forums, I hope you enjoy your experience!
I read your post and see that the Printer Assistant isn't opening to view the ink levels when you click on the printer shortcut.
I will be happy to help you.
Try going to start, all programs, HP, Deskjet 1000 J110, then click on the Deskjet 1000 J110 again to see if the Printer Assistant will now open this way.
If not, then most likely the driver is corrupted. I would uninstall and reinstall the printer software.
Uninstalling the Printer Software.
HP Deskjet 1000 Printer - J110a Drivers.
Select your operating system, click next and click on the software to download and install.
Now try and access the Printer Assistant.
Hope this helps.
Thank you for posting on the HP Forums.
Have a wonderful day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Deskjet 1000 J100a series ink cartrage replacement issue

About a year ago I bought a Hp DeskJet 1000 J110a It worked great until I tried to change the ink Carthage I bought a double Carthage at Office Depot I believe it said 122 . It was HP. I never deviate from that. When I bought HP and installed the 61 I get a message that says these are the wrong cartilages for the printerthey way they are confederated. Please advise meThanks L Scott

@pz1,
Welcome to the forums!
I understand your print jobs are printing out with partial printing on them, and I hope to help!
I am curious to know if the issue could be within the printer hardware itself, and would like you to print out a diagnostic test page to find out.
Please click this link, follow all of the steps and let me know the results:
Fixing Print Quality Problems for the HP Deskjet 1000 (J110), 2000 (J210), 3000 (J310), and HP Deskj...
If you wish to send me a "thank you" for my response to help, click the thumbs up below!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Deskjet 1000 not printing

I recently got a new ink cartrage and tried pinting something for school but it wont print. It shows that i do have ink but when i try to print it gives me blank pages. HELP!

Hello , Thanks for posting in the HP Forums, and welcome! I'd like to help you with the blank pages that are printing out from your HP Deskjet 1000 Printer. Have you tried printing anything in color? Or from an alternate program? If printing in color works okay, then it could be an issue with the cartridge that you purchased. Follow the steps in the document below to resolve your print quality issue.Fixing Print Quality Problems for the HP Deskjet 1000 (J110), 2000 (J210), 3000 (J310), and HP Deskjet Ink Advantage 2010 (K010a) Printer Series If printing in color does not work, and you are still having the issue from alternate programs, make sure you have the most recent version of the full feature driver installed on your computer. You can download it here - HP Deskjet Full Feature Software and Drivers I hope this helps!

HP Deskjet 1000 stopped printing

Running Slackware 13.37, on 1686 with Athlon AMD XP2200+ under cups 1.4.6-i486 and HPLIP 3.113a on kernel 2.6.3.7.6-smp.
Was printing fine when ink ran out, installed new black and ran hp-levels showing 80% color 100% black. Tried to print from Firefox 4.0 and from command line both cases I get "Device Communications Error 5012. Strange it would stop under this situation. Is there a reset? User and root both members of scanner and lp groups. Now user attempts to run hp-levels yields:Unable to communicate with device (code=12):... lsusb shows: Bus 001 Device 003: ID 03f0:8811 Hewlett-Packard
Any thoughts or suggestions welcome

@pz1,
Welcome to the forums!
I understand your print jobs are printing out with partial printing on them, and I hope to help!
I am curious to know if the issue could be within the printer hardware itself, and would like you to print out a diagnostic test page to find out.
Please click this link, follow all of the steps and let me know the results:
Fixing Print Quality Problems for the HP Deskjet 1000 (J110), 2000 (J210), 3000 (J310), and HP Deskj...
If you wish to send me a "thank you" for my response to help, click the thumbs up below!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problem with Deskjet 1000

Image that should be one page is printing portions of the image on many pages.

Arrgh.... OK, the "original" Deskjet 1000 was a 13"x19" printer from a dozen or so years ago that used 45 and 41 cartridges. Sorry about that, the Deskjet 1000-J110 does support an ink level gauge. I would suggest clicking on Start, Devices and Printers, right click on the Deskjet 1000, Printer Properties, Ports and make sure the checkbox is checked for "Enable bidirectional support".
BTW, with ink supplies as small as the 61 I would suggest always having a spare on hand :-).
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp 1000 j110 deskjet installed worked fine tried to install hp laser jet 1000 none work xp pro

hp 1000 j110 deskjet installed worked fine tried to install hp laser jet 1000 now none work win xp pro
any ideas printer port probs???
Thanks
John

Hello jpihl1
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413Hello jpihl1
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

How to install hp deskjet 1000 with out the disk, we lost the disc

hp deskjet 1000 printer j110a need to know how to install without the disc to my laptop

brew31 wrote:
how can i install printer without the diskPlease read this post then provide some details. What printer model? What operating system? Do you have a 32 bit or 64 bit version? In general you can click "Support and Drivers" at the top of the page, enter your product number, select the specific model, then select the proper operating system. Next look for an appropriate driver, typically the full featured driver will be the one to download. Save the download and once the download has completed run the installer. If you have a USB printer you should not connect the printer until instructed to by the installer.

Need driver for hp Deskjet 3050A J611 series on a pre-Intel Imac

Looking for a printer driver for a HP Deskjet 3050A J611 series printer for use on a Pre Intel IMac

Newer drivers for older hardware runs into trouble. Had that problem with HP
over several systems and models of Mac. Sometimes if the printer and OS X
isn't too obsolete, drivers could be tried in one printer intended for a similar one.
The original installer CD for printer software drivers and extras is always a good
thing to keep, so long as there is a printer or a computer on-hand that may use it.
it's a matter of communication
Recent upgrade with newer computer & OS X, has me looking at printer drivers
and a suggested download from Epson of 1.3GB was not really adequate nor
was it necessary; but some 'expert' at Geek guys showed me a web site on his
Smart phone. The real problem was a USB cable to an AIO printer. The other
older printer could not use the 'correct driver' for the newer OS X, in same D/L.
Planned obsolescence is such a joy. Even when a product is almost bulletproof,
someone wants to sell something else. 'Profit-driven' tends to waste resources.
Cheap hardware & costly consumables. Wait til they charge us for good Air...!

Installation of HP Deskjet 1000 J110 Series

Similar Messages

Maybe you are looking for