Installation of IAS 10.1.3 on window server.

Dear All,
I am trying to install IAS 10.1.3 on window server 2008 .
But when I run the setup it give the error " The version of this file is not compatible with the version of window you are running"
Is it possible to install IAS 10.1.3 on window server 2008.
Regards
Sandeep Singh Negi

You need a patch for this to work on Windows 2008 R1. For Windows 2008 R2, you need to use 10.1.3.4 or higher. Check Note [url https://support.oracle.com/epmos/faces/DocContentDisplay?id=444112.1]444112.1, 'Oracle Application Server 10g Release 3 (10.1.3) Installation Requirements for Microsoft Windows Vista / 2008 / 2008R2' on the My Oracle Support website for more info.
Thanks,
EJ

Similar Messages

Installation of Client Access role fails on Windows Server 2008 R2 (Execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP")

Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin Wilson

Hello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson

Installation of Oracle 11g Release 2 on Windows Server 2008 R2

Hi:
When I tried to install 64-bit Oracle 11g Release 2 on a system running 64-bit Windows Server 2008 R2.
One of the system pre-requisites failed with the following error message:
Checking operating system requirements ...
Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 11g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
I presume 6.0 is Windows 2008 Server and 6.1 should be Release 2.
Does this mean that this version is not compatible with Server 2008 Release 2?
venki
Edited by: thevenkat on Jan 20, 2010 9:37 PM

Hans Forbrich wrote:
[email protected] wrote:
Does anyone know when we can expect 11g R2 for Windows?No one outside of Oracle officially knows (and they are under NDA)
No one inside Oracle is permitted to say, or pre-announce release dates for legal reasons.
Which is why I gave you the link - so you could monitor for yourself.OK, thanks...
I was just hoping there was an official release date and I just couldn't find it.
Is there any information about features in 11gR2 for Windows available yet?
Or can you maybe tell me if it will be possible to mount the new "database filesystem" like we can do on linux?
I remember oracle did something similar with Oracle ifs (Internet File System) back in Oracle 9i. (or was it 8i?)
Regards
Thomas

Installation error : Can't connect to X11 window server using ':0.0

Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
WHILE INSTALLING ORACLE10g ON FC1 GETING THIS ERROR
Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
:0.0
:0.0
Unable to start an interactive install session because of the following error:Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
HOW SHOULD I MAKE THE REQUIRED CHANGES

Check this thread:
Re: Can't connect to X11 window server using 'localhost:0.0'

IAS 10.1.3 on Windows Server 2003, can not run AS Control, pls help..

Hi All,
As part or our POC, we want to test the bandwidth requirement and response time of our ADF Faces + ADF BC application.
Can I use stand alone OC4J for this purpose ?
( the one that comes with JDeveloper 10.1.3, under ../jdev/bin)
How many maximum user can be supported by stand alone OC4J ?
Thank you for your help,
xtanto

This is probably an apache issues. In the
httpd.conf, you can set up your server name with a
specific IP number. I have experience similar issue
before, because my win2003 is atached to a DHCP that
gives a variable IP numbers.Oracle apache configuration uses namebased virtual host options. These cannot be mixed by ip-based virtual host options. So this cannot be the problem ;)
Well it could just be that the server address or
fully qualified domain name were not listed in the
Internet Explorer trusted sites list.And we have a winner. The security for IE on Win 2k3 is absurt. You need to add our local server (fully qualified hostname, not just localhost) to trusted sites and it all works like a charm.

How to uninstall BPC 7.5 on Windows Server 2008 R2

Hello Everyone
I have to uninstall BPC 7.5 and then perform a re installation as the Domain Name was wrongly specified in previous installation. We already have a BW server installed and on top of it the BPC 7.5 Installation was carried out.
O.S: Windows Server 2008 R2
D.B: MS SQL Server 2008
Could someone please suggest me the best possible way to uninstall BPC server without harming BW system? Kindly reply.
Thanks and Regards
Ahmed

Hello Everybody
I ran Server-->Diagnostics and found that there were 2 errors:
1) SAP Server Connection->Database Connection->Status:Connection Error
2) Message Queue-> Queue Name: Private$\BpcStatusMessageQueue>Status:Incorrect>Possible Reasons->BPC WebServer or IE Proxy cannt work.
I have .NET 2.o installed and the value of "Enable 32 bit applications to run on 64 is set to True". I checked for users BPC_SYSADMIN, BPC_Admin, BPC_USER are all able to login to BW system. Also the value of message queue under private queue is same as the one Private$\BPCStatusMessageQueue.
Where do i need to check for logs for these errors.Could someone suggest how to resolve them.
Thanks Everybody.

Windows Server 2012 R2 Essentials Trial Key - Did I miss it, too?

I tried both "Windows Server 2012 Essentials" and "Windows Server 2012 R2 Essentials". Here is the link to the page I downloaded the images:
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-essentials
The following are the respective links to the images I used which were provided by the above webpage:
http://care.dlservice.microsoft.com/dl/download/1/2/9/129AEC4F-1C6C-44B2-9B61-77935E8AB1F4/WindowsServer2012Essentials-English-Install.iso
http://care.dlservice.microsoft.com/dl/download/8/F/7/8F7024D2-AB2A-4BE2-8406-1E3AC49C5C1F/9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5.ISO
I tried burning these images to DVD and booting my Intel NUC with resulting disc. Setup goes fine but it asks me for a product key. I have not received any mail nor was there any pointers to a product key. This is why I tried both R1 and R2.
I found a similar post here regarding this issue (in fact I found a couple):
http://social.technet.microsoft.com/forums/windowsserver/en-US/db7fd5b9-f58d-4456-86cf-816ec91ded14/windows-server-2012-trial-key-did-i-miss-it
But the answers were unsatisfactory, so please do not give me the same response.
Just in case the question/directive comes up, I redownloaded and re-burned the images using sector verification. There are no checksums posted on the site so who knows if something got broken while downloading it, but I find it extremely unlikely that
a few bad sector would cause the intaller to forget its evaluation key rather than borking the whole installer.
Further note that I tried "Windows Server 2012 R2" (standard / non-essentials) and that image correctly had the trial versions baked in. So, I would bet dollars to donuts the problem lies in the images not in a download / burn failure.
I want to use the new NUC as a central content/backup server for all the home computers which are unfortunately growing at bunny reproduction rates. Since Windows Home Server was discontinued, I was pointed to Server 2012 R2 as the alternative / upsell.
Let me know if this is the case or if a better-fit product exists.
Also, is the "Essentials" install a simply a licensing matter (e.g., 25 user cap) or is it more fundamentally crippled than the standard version? I am only a home enthusiast and so not really interested in using the product in a production environment.
I only want some ensurance that if I download "standard", I can put in an "essentials" key at the end of evaluation. If not, then please point me to a correct "Windows Server 2012 R2 Essentials" trial image.
Thanks,
Ryan

Hi Ryan,
à
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-essentials
We can find following description from this TechNet Evaluation Center website. Then please check if you can
find product key.
In addition, for Windows Server 2012 Essentials, please check if you can use
HHRHF-YMNJW-RPGCC-VV68W-BWMVY. For Windows Server 2012 R2 Essentials, please check if you can use
R9N79-23MWD-MBP9B-KHF8Q-C36WX.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Problem starting Repository Browser Service on Windows Server 2008

Using the default Warehouse Builder installation in the 11g (11.1.0.7.0) databaseinstallation on a clean Windows Server 2008 64-bit installation.
Warehouse Builder installed and populated ok, OWB client works fine etc.
When trying to start the Repository Browser listener by running the startOwbbInst.bat, the OC4J container crashes with the following error in the \owb\j2ee\log\oc4j\log.xml:
+<MSG_TEXT>Could not create Secure http listener due to {0}</MSG_TEXT>+
+<SUPPL_DETAIL><![CDATA[java.io.FileNotFoundException: C:\Oracle\product\11.1.0\db_1\owb\bin\admin\..\..\j2ee\config\%ORACLE_HOME%\owb\j2ee\config\keystore.jks (The system cannot find the path specified)+
+     at java.io.FileInputStream.open(Native Method)+
+     at java.io.FileInputStream.<init>(FileInputStream.java:106)+
+     at java.io.FileInputStream.<init>(FileInputStream.java:66)+
+     at oracle.oc4j.security.OC4JSSLSocketFactory.getStoreIn(OC4JSSLSocketFactory.java:253)+
(The local_service_login.bat works fine).
We're starting this as an administrator user in Win2008.
All parameteres in the setowbenv.bat seems to be correct as far as I can tell. There is a strange reference to %ORACLE_HOME% in the above log, of which I've no idea where it is coming from....
Identical installation worked fine on a 64-bit Windows Server 2003, - so can this be something related to a new security model in Windows Server 2008?
(I found a posting regarding problems with the startOwbbInst.bat on Vista [here |http://forums.oracle.com/forums/thread.jspa?messageID=2275781&#2275781] - so maybe.... however, the quickfix mentioned there did'nt help us here...)
Anyone experienced similar problems (and preferably solved them) on Windows Server 2008 and/or Vista?
Regards,
-Haakon-

Solved this after some trawling through xml configuration files on the server.
The file C:\Oracle\product\11.1.0\db_1\owb\j2ee\config\http-web-site.xml contains the reference to keystore.jks:
          <ssl-config keystore="*%ORACLE_HOME%*/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
changing this to:
          <ssl-config keystore="C:\Oracle\product\11.1.0\db_1/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
and the OC4J container starts successfully.
Regards,
-Haakon-

HOW TO INSTALL SAP Business One to Windows Server 2008

Hi everybody, anyone can help me how to install SAPB1 in windows server 2008? last night i try to install SAPB1 to my sever windows 2008 but after installation i cannot find for the shortcut SAP business one in my desktop but usaully in default installation can create shortcut to the destop. in windows server 2003 there is no problem in the installation? and also it is support windows server 2008? when i try SAP popup notice that my MSQL is outdated... please help me...thanks...

Dear Raffy,
unfortunetly SAP B1 is still not supported under Windows Server 2008.
For further information about supported plataforms please refer to
the following site:
https://service.sap.com
> SAP Channel Partner Portal ¦ Existing Users - Login
> Solutions ¦ SAP Business One
> Product Availability
> Supported Platforms
Best regards,
Tomas Black

Problems with new installation of iAS on Windows

This is a new installation of iAS 10.1.2.0.2 on Windows. The application server doesn't come up properly after reboot. The log file D:\Oracle\ora101_infra\opmn\logs\OC4J~OC4J_SECURITY~default_island~1 contains an error stack that begins with:
SSO: DB Error. Please make sure the database is available and restart SSO Server
Obviously, the database (service name OracleServiceIAS472F) is started after the rest of the services (service names similar to Oracleora101_XXX). I have found documentation on how to make the ProcessManager service of the OracleAS Infrastructure before it starts up the ProcessManager service of the middle tier, but no notes on starting the database service in an order different from Windows default. Extensive googling doesn't give me that others have had similar problems. I would like to verify before starting to mess around with the order of services starting at boot time.
The person doing the installation (I don't have direct access to the machine) maintains that installation of WebUtil is causing these problems, and that the problems disappear if he reverts the configuration of WebUtil. I have limited experience with forms configuration and cannot see the connection.
Any input would be greatly appreciated!
Regards,
Maria

Maria, we have numerous installations of both 10gDB 10.1.0.5/10gAS 9.0.4.2 and 10gDB 10.2.0.3/10gAS 10.1.2.0.2 here. The environments are all two server configurations: 1 server has DB + AS Infrastructure, 1 server has AS Middle Tier. I have not had an issue with a DB server reboot causing the Infrastructure to not come up, although we have a strict rule of always rebooting these two servers in pairs: first DB then AS Middle Tier. And since there are gazillion MS patches, they do get rebooted frequently. Regards, John

Installation problem on windows server 2008 r2 datacenter edition 64bit

hi
today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
thanks for feedbacks!
regards, jan

> no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
If you take the time to give exact error messages then someone will be certainly able to help
> on windows server 2003, there are NO problems.
Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
Markus

Installation problem with windows server 2003 64 bit

I downloaded all hyperion components from e-deleivery for windows server 2003 64 bit when i tried to install it a message said that some component are not compatible when i removed stratigic finance and FDM components the installation started and completed .in the configuration phase many components failed to configured and here's a copy of the log file:
(Nov 21, 2010, 02:25:51 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, The specified database is already configured.
(Nov 21, 2010, 02:30:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NumberFormatException: null
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.valueOf(Unknown Source)
     at com.hyperion.hit.registry.ServiceComponentImpl.getPort(ServiceComponentImpl.java:45)
     at com.hyperion.hub.HubAppServerDeployer.checkOpenLDAPFromRegistry(HubAppServerDeployer.java:282)
     at com.hyperion.hub.HubAppServerDeployer.updateOpenLDAPPort(HubAppServerDeployer.java:175)
     at com.hyperion.hub.HubAppServerDeployer.preDeploy(HubAppServerDeployer.java:113)
     at com.hyperion.cis.config.AppServerDeployer.preDeploy(AppServerDeployer.java:205)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:604)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:41:18 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:43:35 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:45:21 PM), com.hyperion.awb.config.AWBDBConfigurator, ERROR, Error:
java.lang.NullPointerException
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
     at com.hyperion.awb.config.PIRegistartionXMLWriter.updateHubDetails(PIRegistartionXMLWriter.java:265)
     at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:249)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:275)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
(Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, Error occured in deRegisterOldProductInstance(): null
(Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
(Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, ERROR:
com.hyperion.cis.config.AppDeployException: CMS Client cannot be created
     at com.hyperion.awb.config.AWBAppServerDeployer.publishBPMAInstanceDocument(AWBAppServerDeployer.java:704)
     at com.hyperion.awb.config.AWBAppServerDeployer.registerProductInstance(AWBAppServerDeployer.java:796)
     at com.hyperion.awb.config.AWBAppServerDeployer.postDeploy(AWBAppServerDeployer.java:350)
     at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:336)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:610)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 02:50:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:51:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:54:20 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:58:04 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:58:16 PM), com.hyperion.essbase.config.EssbaseAgentTaskProcessor, ERROR, Error in executing the script to register Essbase as a service: exitCode = 1
(Nov 21, 2010, 02:58:54 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:59:15 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 02:59:16 PM), com.hyperion.planning.HspDBConfigurator, ERROR, Error happened: Index: 0, Size: 0
(Nov 21, 2010, 02:59:16 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.planning.HspDBConfigurator.configure(HspDBConfigurator.java:209)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 03:03:06 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:05:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:19:29 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Nov 21, 2010, 03:19:30 PM), com.hyperion.hfm.config.HfmDbConfigurator, ERROR, Error while configuring HFM DatabaseEntry does not exist for these parameters in tnsnames.ora file.
(Nov 21, 2010, 03:19:30 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.hfm.config.HfmDbConfigurator.configure(HfmDbConfigurator.java:151)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Nov 21, 2010, 03:19:39 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NullPointerException
     at com.hyperion.hfm.config.HfmAppServerTaskProcessor.execute(HfmAppServerTaskProcessor.java:105)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeCustomTask(RunAllTasksWizardAction.java:741)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:188)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
if any one installed hyperion EPMS on windows server 2003 64 bit please i need your help
thanks in advanced
Edited by: eng3m on Nov 21, 2010 3:32 PM

Hi,
EDGE/Crystal Reports Server and Enterprise are no native 64bit applications. That does mean that they only run in 32bit mode. But you can install it on a 64bit hardware with a 64bit OS.
Regards
-Seb.

Multiple installations of XI 3.0 on the same Windows server

Hi,
is it possible to have multiple instances of XI 3.0 installed on the same Windows server? I know that I can create seperate database users for the repositories and that I can have different ports configured for CMS. I'm concerned about the registry and whether a second installation would overwrite the registry for the first installation or if there are anyother show stoppers.
Thanks,
Matt

Not yet, I know our product group is looking at this but currently only 1 per windows server. They are now supporting XI3 on top of XIR2 or other products known as side by side install. I don't have any type of ETA and wouldn't expect it soon.
Regards,
Tim

Add-on installation problem in Windows Server 2003

Hi guys,
I have a problem when i want to install my add-on in the Windows Server 2003. The server gives me error :
Unable to load AddOnInstallAPI.dll
and when i try install using the same installer at the client station, everything is ok.
Does anybody have suggestion about that problem? I suspect the problem is the Windows' security that did not allowed me to load the .dll. Does anybody know how to set the security?
Thanks you,
Harianto Ng

I've found an answer on the similar question here, on the forum, saying that Windows 2003 is not a supported SAPBO Client OS.
In my experience I could not even set a reference to SAPbouicom.exe with a message "cannot load DLL"...
Natalya

Java2SDk 1.4.2.06 installation problem on Windows Server 2003

I tried the installation of Java2SDk 1.4.2.06. ,I tried this, but it fails to complete and NO directory folder is created so I cannot continue with the proccess. The OS is Windows Server 2003.
I have done the following procedures:
Enabled/Disabled the IIS configuration
Enabled/Disabled the Windows Firewall
Enabled/Disabled Antivirus software
The error in the event log is:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 3/6/2007
Time: 2:23:49 PM
User: N/A
Computer: GERSSERVER
Description:
Faulting application msiexec.exe, version 3.1.4000.1433, faulting module unknown, version 0.0.0.0, fault address 0x0013b43e.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 6d 73 69 ure msi
0018: 65 78 65 63 2e 65 78 65 exec.exe
0020: 20 33 2e 31 2e 34 30 30 3.1.400
0028: 30 2e 31 34 33 33 20 69 0.1433 i
0030: 6e 20 75 6e 6b 6e 6f 77 n unknow
0038: 6e 20 30 2e 30 2e 30 2e n 0.0.0.
0040: 30 20 61 74 20 6f 66 66 0 at off
0048: 73 65 74 20 30 30 31 33 set 0013
0050: 62 34 33 65 b43e
Please advice on this problem. Other tech support recommendations were to reinstall the OS.
I have also tried installing the latest version of Java 2 SDK without success.
Thanks for your support
William Hernandez
UPR-Mayaguez Campus

Thank you so much for your help!
I have just tried as you said. Now I see that actually at the beginning of the intallation, there is a NullPointerException. Here is the error information:
===============================
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Launching Java(TM) 2 Runtime Environment...
java.lang.NullPointerException
at sun.java2d.SunGraphics2D.revalidateAll(SunGraphics2D.java:2086)
at sun.java2d.SunGraphics2D.drawString(SunGraphics2D.java:2536)
at com.sun.wizards.awt.Header.paint(Header.java:112)
at sun.awt.RepaintArea.paint(RepaintArea.java:177)
at sun.awt.windows.WComponentPeer.handleEvent(WComponentPeer.java:260)
at java.awt.Component.dispatchEventImpl(Component.java:3678)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
===============================
Please help me out of this. Thank you.

Installation of IAS 10.1.3 on window server.

Similar Messages

Maybe you are looking for