Installation of MaxDB 7.8 on Windows 7 stalls

The installation of MaxDB 7.8 64-bit on Windows 7 stalls when a "Custom" installation is made and loading of tutorial data is requested.
I've reported the issue and got the following response from the MaxDB colleagues:
The installer tries to switch the automatic log backup on AFTER the tutorial data is loaded.
Unfortunately the log area is too small configured by default to hold all tutorial changes without backup. We will correct the installer and you could prevent the Log Full situation (which leads to the stalling of the installer) by configuring the log area to a size of 250 MB.
Solution:
As described above or do not load tutorial data at installation.
Hope to save you some time when installing.
Regards,
IL

Hi, you must copy folder "drivers/etc" from system32 to SysWOW64 and then you should continue with installation. Finally copy changes to system32.
I think you have different versions and windows
Folder name      Bitness      Description
System32      64      Windows System folder (system directory) for 64-bit files
SysWOW64      32      Windows System folder (system directory) for 32-bit files
Regards, Jesú

Similar Messages

Windows stalls in install iTunes 5.0

Hi,
I have a problem installing the new iTunes on my Windows XP. If it's going to install new files, Windows stalls, it doesn't do anything anymore after that. I have to reboot every time, but it goes on every time. Does anyone know a solution for this problem?
Many thanks in advance,
Tim Philippen

So, Tom, where in the installer did it hang on you? You know a screen shot would really help. Did it hang right at the beginning with the first "iTunes+Quicktime" progress bar?
That's usually because there's a weird character in the file path to your iTunesSetup.exe file. And if you just move the file somewhere else, like C:\, the top level of your boot drive, it will run just fine.
Is it hanging after all the dialog windows where it's installing Quicktime or Publishing Product Information. I would ask if you running in 4 bit mode (i.e. 16 colors) or check your version of ole32.dll, sometimes an older copy of that can cause problems.
Go to My Computer->C:->WINDOWS->System32 . Then right click on ole32.dll and select "Properties". Click on the version tab and report back the File version.
If you're still having problems, let's get a log file from the installer and give it to the Apple engineers.
1. Start menu -> Run... In the text field of the dialog that comes up, type in "cmd" and hit return.
2. In the command prompt dialog that comes up, find the iTunesSetup.exe file on your desktop and drag it to this window. Then on the same line type in a space and then the following:
/Verbose"c:\log.txt"
There is no space between the e in Verbose and the double quote (").
3. Hit return.
4. The installer will run like it did when you double clicked on it, but it's creating a log file in the background. Get to the point where it hangs and kill again. Then look for the log file:
C:\log.txt
Find that file and send it to the apple moderator. Tell her Toonz sent you. It doesn't hurt to put the URL to this discussion thread, so that whoever gets it has some context.

I have tried to download itunes 10.5 but during installation it gives an error of windows installer.Please let me know how to install it.

I have tried to download itunes 10.5 but during installation it gives an error of windows installer.Please let me know how to install it.

Repair youe Apple Software Update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install.
If you don't find ASU in All Programs, go to Control Panel, Add & Remove Programs.

Installer encountered an error: 0x80096002 on windows 8.1

hello,
I am trying to install Windows Installer 4.5 [windows6.0-KB942288-v2-x64] on windows 8.1 which is pre-requisite for installation of "Microsoft® SQL Server® 2008 Express with Advanced Services"
I am getting below error while installing Windows Installer 4.5
"Installer encountered an error: 0x80096002 on windows 8.1"
I tried to add the feature "Windows Identity Foundation 3.5" in order to resolve the issue
But it didn't help
PLs assist
Thanks
Padol

Hi Padol,
Since the issue regards Widows 8.1. I will help you move the question to the related forums at
http://social.technet.microsoft.com/Forums/en-US/home?forum=w8itprogeneral . It is appropriate and more experts will assist you.
Thanks for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

When i try to install my copy of photoshop elements 1.0.1 , get the answer to install internet explorer 4.0 or more, but i use the firefox browser. by the way, the internet explorer installation was not successful with my windows 8. What can I do?

when i try to install my copy of photoshop elements 1.0.1 , get the answer to install internet explorer 4.0 or more, but i use the firefox browser. by the way, the internet explorer installation was not successful with my windows 8. What can I do?

Photoshop Elements 1.0.1 seems like very old software 2001 I believe. Try asking in the Elements maybe someone there will be able to answer your question. Photoshop Elements

Native installation package creation failed: Error: EndUpdateResource: Windows Error #5

We've got a customer who gets this error when attempting to install our software. My Google-fu makes me think this is a rare error. Chris, would you have any ideas as to the cause of this?
Many thanks,
Taylor
[2011-09-18:14:36:24] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:36:24] Commandline is:
[2011-09-18:14:36:24] No installed runtime detected
[2011-09-18:14:36:44] Relaunching with elevation
[2011-09-18:14:36:44] Launching subprocess with commandline c:\users\sawhit~1\appdata\local\temp\air9728.tmp\adobe air installer.exe -ei
[2011-09-18:14:36:52] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:36:52] Commandline is: -stdio \\.\pipe\AIR_6756_0 -ei
[2011-09-18:14:36:52] No installed runtime detected
[2011-09-18:14:36:54] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-18:14:36:54] Installing msi at c:\users\sawhit~1\appdata\local\temp\air9728.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-18:14:37:29] Runtime Installer end with exit code 0
[2011-09-18:14:37:30] Elevated install completed
[2011-09-18:14:37:37] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
[2011-09-18:14:37:37] Runtime Installer end with exit code 0
[2011-09-18:14:37:43] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:37:43] Commandline is: -installupdatecheck
[2011-09-18:14:37:43] Installed runtime (2.7.1.19610) located at c:\Program Files\Common Files\Adobe AIR
[2011-09-18:14:37:48] Performing pingback request
[2011-09-18:14:37:49] Pingback request completed with HTTP status 200
[2011-09-18:14:37:49] Starting runtime background update check
[2011-09-18:14:37:49] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.7.1.19610/update
[2011-09-18:14:37:49] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.7.1.19610/update to C:\Users\sawhitman\AppData\Roaming\Adobe\AIR\Updater\Background
[2011-09-18:14:37:50] Runtime update not available
[2011-09-18:14:37:50] Unpackaging cancelled
[2011-09-18:14:37:50] Runtime Installer end with exit code 0
[2011-09-18:14:42:13] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:42:13] Commandline is: C:\Users\SAWHIT~1\AppData\Local\Temp\YNAB3_Live_3.5.3.4-2.air
[2011-09-18:14:42:13] Installed runtime (2.7.1.19610) located at c:\Program Files\Common Files\Adobe AIR
[2011-09-18:14:42:16] Unpackaging file:///C:/Users/SAWHIT~1/AppData/Local/Temp/YNAB3_Live_3.5.3.4-2.air to C:\Users\sawhitman\AppData\Local\Temp\flaB571.tmp
[2011-09-18:14:42:39] Application signature verified
[2011-09-18:14:42:39] Unpackaging/validation complete
[2011-09-18:14:42:39] No app located for appID 'com.youneedabudget.YNAB3.Live' and pubID '9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1'
[2011-09-18:14:42:50] Converting unpackaged application to a native installation package in C:\Users\sawhitman\AppData\Local\Temp\fla3A1C.tmp
[2011-09-18:14:43:03] Native installation package creation failed: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: EndUpdateResource: Windows Error #5" errorID=0]
[2011-09-18:14:43:13] Application Installer end with exit code 7
[2011-09-18:14:43:20] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:43:20] Commandline is: C:\Users\SAWHIT~1\AppData\Local\Temp\YNAB3_Live_3.5.3.4-2.air
[2011-09-18:14:43:20] Installed runtime (2.7.1.19610) located at c:\Program Files\Common Files\Adobe AIR
[2011-09-18:14:43:24] Unpackaging file:///C:/Users/SAWHIT~1/AppData/Local/Temp/YNAB3_Live_3.5.3.4-2.air to C:\Users\sawhitman\AppData\Local\Temp\flaC01C.tmp
[2011-09-18:14:43:37] Application signature verified
[2011-09-18:14:43:37] Unpackaging/validation complete
[2011-09-18:14:43:37] No app located for appID 'com.youneedabudget.YNAB3.Live' and pubID '9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1'
[2011-09-18:14:43:59] Converting unpackaged application to a native installation package in C:\Users\sawhitman\AppData\Local\Temp\fla47B3.tmp
[2011-09-18:14:44:16] Native installation package creation failed: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: EndUpdateResource: Windows Error #5" errorID=0]
[2011-09-18:14:44:28] Application Installer end with exit code 7

On Windows 7, make sure you are running as Administrator:
Download and install Adobe AIR from this page
Download YNAB3_Live_3.5.3.4.air to a folder on your computer.
Navigate to the folder on your computer where you saved the YNAB3_Live_3.5.3.4.air. If you are on Windows Vista or Windows 7, right-click on the file and choose “Run as Administrator.” For Mac, Linux, and all other versions of Windows, simply double-click on it to install YNAB 3.
Thanks,
Lisa Chao
Adobe Flash Runtime Team

Creative Cloud installs but will not open on windows 7

Creative Cloud installs but will not open on windows 7

Bill's gill what specific error message do you receive when you attempt to open the Creative Cloud Desktop application?

Un installation of 11.5.8 on windows server 2000

HI,
I tried to Un install and cleanup the installation of 11.5.8 on windows 2000 server. I used doc. given on metalink. Afterwards I couldn't start the Rapidwiz. I could only reinstall 11.5.8 after reinstalling win2k server. If anybody has does the successful un installation of 11.5.8 on win2k server, Pl. provide to me the information.
Thanks
Rajeev

Kashif,
Do you have a proper entry in the hosts file? Verify by running the following:
C:\> ping <hostname>
C:\> ping <hostname.domainname>
In addition, please check the installation log file for more details about the error.

7.20 SAP Web AS installation on (32 Bit, 2 GB) Windows OS

Hi ALL,
I need 7.20 SAP Web AS installation on (32 Bit, 2 GB) Windows OS.(java Server)
I am new to this Server Installation. This would be my first Server Installalation.
Kindly share any installation guide available for 720 landscape installalation. I need a bit detailed doc.
Also do let me know if 32Bit, 2 GB is enough?
Waiting for reply
Regards,
Archana

Hi Archana,
Check the Dowload link:
http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/a0a6bd7b-3dfc-2c10-eb95-aae0f777d4ab
Refer to blog for procedure. Although the procedure is for NW 7.3 installation the procedure is similar and the downloads are already available from above link.
http://tknight.org/sdn/show/25031
2GB should be enough even though 3GB is recommended.
Regards,
Srikishan

Windows Update installs older Canon MG4100 drivers in Windows 8/8.1

When I turn on the MG4120 printer and the printer is already setup for wireless and I have WSD enabled, Windows 8 or 8.1 automatically installs older Canon MG4100 drivers from Windows update. The same thing happens if I connect the USB printer before installing the Canon software from the website and the same issue also happen in wireless mode. The version that gets installed by Windows Update is the same version listed in the catalog at http://catalog.update.microsoft.com/v7/site/Search.aspx?q=mg4100.
Windows 8,Windows 8.1 Drivers,Windows Vista Drivers (Printers) 8/16/2011 2.50.2.70
Windows 7 Drivers (Printers) 3/13/2012 18.0.2.31
Canon, can you please submit the newer printer driver to microsoft Windows Update?

Hi KeithWeisshar,
WSD drivers are supplied and supported by Microsoft. The version numbers and dates are not comparable to the numbers and dates for our drivers. While WSD will provide you with basic printing capability and some features, to get the most from your printer, I recommend using the drivers found on our website.
If you have any other questions, please feel free to Contact Us!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Numéro de commande:AD001782624FR.Impossible installer produit.Mon système est Windows Vista édition familiale.Merci de me rembourser.Mr Serge COLUMEAU

Numéro de commande : AD001782624FR
Impossible installer produit.Mon système est Windows Vista édition familiale.
Merci de me rembourser et d'annuler l'abonnement
Mr Serge COLUMEAU

Hi epicure.06270,
I just took a look at your account, and it looks as though the order is still processing. It can take several hours for a subscription to process fully. If you're still unable to sign in and access your account later on this afternoon, please let us know and we will take a closer look at your account.
Best,
Sara

Step by Step Installation of Grid Control 10g on windows

Hi,
I need to install Grid Control 10gR2 on windows XP. Is anybody have steps for installations of Grid Control 10g on windows? (With snapshots will be advantage) . Is it possible to install Grid Control 10gR2 on windows XP?
please provide me a link and where will I get link for downloading?
Thanks in advance.
Regards,
Manish

Hi Manish;
I need to install Grid Control 10gR2 on windows XP. Is anybody have steps for installations of Grid Control 10g on windows? (With snapshots will be advantage) . Is it possible to install Grid Control 10gR2 on windows XP? Please follow below and see its helpful for your issue:
http://www.stanford.edu/dept/itss/docs/oracle/10gR2/install.102/b31288/emqwn.htm
please provide me a link and where will I get link for downloading?Please follow below and see its helpful for your issue:
http://www.oracle.com/technology/software/products/oem/index.html
Regard
Helios

Error in Netweaver installation with MaxDB on a 64-bit IA windows 2003

Hello all,
I am installing Netweaver CE 7.1 in Windows 2003. Out of the 35 phases , i am getting an error in the 13th phase. The name of the Phase is " Create Database Instance" . An error log is created and the details are as below :
Subprocess starts at 20091014155346
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n SGPSRV011 -d SMD -u CONTROL,******** db_start
Execute Session Command : exit
Subprocess stops at 20091014155349
Subprocess call failedERR
-24994,ERR_RTE: Runtime environment error
1,'SMD' has stopped unexpectedly, (view 'Application Event Log') (OS error code 11000)
This is the text of the error being displayed :
An error occurred while processing service SAP NetWeaver CE Productive Edition > Installation Options > Standard System > Standard System. You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_PROD_ADA/INSTALL/ADA/STD/AS.
I feel that this error has something to do with the settings in the MaxDB database. Can you please help which setting needs to be changed ? Both the Netweaver and the MaxDB are on the same 64-bit Itanium server and the OS is Windows 2003.
Thanks and Regards
Vijay

Check your max db database build, [https://service.sap.com/pam] and apply a patch if available. Also, you may want to log a problem on SMP.

Creative Cloud Installation: Gets half way completed then Windows says its has stop working and will find a solution BUT NEVER DOES. How to fix/bypass this issue??

So for the last 36 hours I have attempted to install Adobe Pro with no luck. Creative Cloud is the app I am forced to use to install. I have windows 7 OS, as the installing begins all is working just fine. As the installations gets about 50% complete, it seems to stall out and then Windows interrupts and says "Creative Cloud is not responding, Windows will find a solution and fix the problem" Mind you Windows never comes back with anything close to an solution. Has anyone seen this?? Do you have an fix?? It would be greatly appreciative

Hi,
Could you please retry after restarting the system.
If this issue does not get resolved even after restart then please share the following details :
1. Do you have any previous version of Acrobat installed?
2. Share PDApp.log, MSI Installation log file from %temp%
Thanks,
Vinod

Full ABAP Edition-Trial: no installation of maxdb???

Hello to all,
I installed "Full ABAP Edition-Trial" some days ago and everything worked fine without any problems. Windows on partition H: and programs (like sap and sapdb) on partition L:.
Because of an other problem I had to reinstall Windows on H:. I deleted the subfolders L:\SAP and L:\sapdb. to get a clean world for sap.
I start the installation process and setup asks me the path to install sap. I enter "L:\SAP". In the next screen it asks me about the database master password. I enter my password. In the next screen the setup tolds me to install the components MaxDB to L:\sapdb and application server to L:\SAP\NSP. Total Size: 18823.1 MB needed (By the way: I have 40 GB free).
I press the install button and installation process runs without errors. Then (after 2 minutes!) I get the screen that tolds me "The InstallShield Wizard has successfully installed SAP Netweaver 2004s ABAP Trial Version.".
So I start the SAP Management Console and start the instance. The icons become green and I see for example that the processes msg_server.exe and dispwork.exe are running. Dispwork.exe stops after a few seconds.
Looking to the system log I see "Communications data: Service initialization failed" and some "SAP-Basis System: Initialization DB-Connect Failed, Return Code 008192" messages.
When I press the database icon in the the SAP Management Console, I get a screen "page could not be displayed".
So it seems like a database problem. I look to the windows explorer and there is only the SAP-folder (with 341 MB). THERE IS NO SAPDB-FOLDER!!!
I can't find an installation-log to see if there were problems (No log.txt at SAP\NSP).
I deinstalled everything with deinstaller, run some registry cleaner and also installed a clean windows at H:, but everytime the same. I find note 572836 (Deleting SAPDB Registry entries and services) but it doesn't help.
I know when I installed SAP the first time (where it worked fine), I had not to install the microsoft loopback adapter. So I tried the installation with and without the adapter. No success!!!
I get crazy about it... Perhaps there is something wrong about the preinstalling environment: I download the two files SAPNW2004sABAPTrail_part1.rar and SAPNW2004sABAPTrail_part2.rar to the folder L:\downloads. Then I unpack only the first one SAPNW2004sABAPTrail_part1.rar in the same folder. Then there is a new folder SAPNW2004sABAPTrail_part1. This one contains a folder SAPNW2004sABAPTrail. There are some folders and files. I change to the folder images. There I start the setup.exe (but before I installed the lookback adapter).
I'm a little bit irritated about the files SAPNW2004sABAPTrail_part1.rar and SAPNW2004sABAPTrail_part1.rar. The first one has a size of 1536000KB and the SAPNW2004sABAPTrail_part2.rar has a size of 1249739KB. Just for analyze I unpack the SAPNW2004sABAPTrail_part2.rar-file and see that it has exactly the same structure like SAPNW2004sABAPTrail_part1.rar!!! Also the size of the unpacked files are the same. Is this normal???
So, that's my problem: No database here. Anyone here who has an idea? Please help me. I really need ABAP here!!!
Kindly regards,
Andy

I have found the InstallationSteps.stat and install.log. Everything seems to be installed successfully, but no database is mentioned :-(. Here are the two files.
I still need help!!!
=Start of InstallationSteps.stat====================
CreateDirectories;20070108204154;20070108204155;Succeeded
CopyExecutables;20070108204155;20070108204157;Succeeded
AdaptProfiles;20070108204157;20070108204159;Succeeded
AddToServices;20070108204159;20070108204207;Succeeded
StartSCSInstance;20070108204207;20070108204232;Succeeded
StopSCSInstance;20070108204232;20070108204233;Succeeded
CreateXUserEntry;20070108204233;20070108204234;Succeeded
RestartServiceViaSAPControl;20070108204234;20070108204305;Succeeded
InstallMMC;20070108204306;20070108204308;Succeeded
=End of InstallationSteps.stat====================
and here is the install.log file:
=Start of install.log ====================
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateDirectories
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:41:55
ACTION: * Logfile: steps.CreateDirectories.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateDirectories <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CopyExecutables
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:41:56
ACTION: * Logfile: steps.CopyExecutables.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory
COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory
COPY_EXECUTABLES: Prepare environment for engine configuration:
COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.
COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.
copyFileWithProcessing(L:\SAP\NSP\home\additional_sw\t_startSystem.cmd,L:\SAP\NSP\SYS\exe\run,startSystem.cmd)
Reading file L:\SAP\NSP\home\additional_sw\t_startSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(L:\SAP\NSP\home\additional_sw\t_stopSystem.cmd,L:\SAP\NSP\SYS\exe\run,stopSystem.cmd)
Reading file L:\SAP\NSP\home\additional_sw\t_stopSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(L:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd,L:\SAP\NSP\SYS\exe\run,strdbsj2ee.cmd)
Reading file L:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd
Keys:
Sections to process:
COPY_EXECUTABLES: Finished ....
SUCCESS: Execution of step: >> CopyExecutables <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AdaptProfiles
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:41:57
ACTION: * Logfile: steps.AdaptProfiles.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\antlr.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_compatibility.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.perm.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.core.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com_sap_tc_jtools_jver.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\exception.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\i18n_cp.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\iaik_jce.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jenqulib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jta.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jts_jco.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\logging_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqljts.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqlsta.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\remserver.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\resources.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\rfc_container_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\sapxmltoolkit.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_admin_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\transport.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_service.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_admin_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_internal_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_kernel.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_trace_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_util.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\charsets.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jce.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jsse.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\rt.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\local_policy.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\US_export_policy.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\sunrsasign.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\lib\tools.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
ADAPT_PROFILES: Start to create the profiles
CONFIGURATION: Create JDBC Path in J2EE installation directory.
CONFIGURATION: New JDBC Path: L:\SAP\NSP\DVEBMGS00\j2ee\jdbc (Exist=false)
CONFIGURATION: Old JDBC Path: L:\SAP\NSP\DVEBMGS00\j2ee (Exist=false)
CONFIGURATION: New JDBC Path created.
CONFIGURATION: Copy Jars from: L:\SAP\NSP\_installTemp\j2ee\INSTALLER\COMMON\JDBC\ADA
CONFIGURATION: to : L:\SAP\NSP\DVEBMGS00\j2ee\jdbc
ADAPT_PROFILES: Create profiles for standalone J2EE
copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,L:\SAP\NSP\SYS\profile,DEFAULT.PFL)
Reading file additional_sw/t_DEFAULT_PFL_710
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,L:\SAP\NSP\SYS\profile,START_DVEBMGS00_AMMERSEE)
Reading file additional_sw/t_START_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,L:\SAP\NSP\SYS\profile,NSP_DVEBMGS00_AMMERSEE)
Reading file additional_sw/t_SID_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,L:\SAP\NSP\SYS\profile,START_DVEBMGS00_AMMERSEE)
Reading file additional_sw/t_START_DB_INIT_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,L:\SAP\NSP/SYS/exe/run/,strdbmsONCE.cmd)
Reading file additional_sw/t_strdbmsONCE.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_setsapenv.cmd,L:\SAP\NSP/SYS/exe/run/,setsapenv.cmd)
Reading file additional_sw/t_setsapenv.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
SUCCESS: Execution of step: >> AdaptProfiles <<
 finished successfully.
 Elapsed time: 00:00:01 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AddToServices
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:41:59
ACTION: * Logfile: steps.AddToServices.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
AddToServices: Instance shall not be started by default.
AddToServices: Therefore we provide a start script in:
AddToServices: L:\SAP\NSP\home\startEngine.bat
AddToServices: Service will be created.
DEBUG: Register service with the following command:
DEBUG: "L:\SAP\NSP\SYS\exe\run/sapstartsrv.exe" -r -q -s NSP -n 00 -p L:\SAP\NSP\SYS\profile\START_DVEBMGS00_ammersee
Start external command...
Service succesfully installed.
Process exited with rc: 0
SUCCESS: Execution of step: >> AddToServices <<
 finished successfully.
 Elapsed time: 00:00:07 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StartSCSInstance
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:42:07
ACTION: * Logfile: steps.StartSCSInstance.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\antlr.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_compatibility.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.perm.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.core.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com_sap_tc_jtools_jver.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\exception.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\i18n_cp.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\iaik_jce.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jenqulib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jta.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jts_jco.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\logging_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqljts.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqlsta.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\remserver.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\resources.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\rfc_container_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\sapxmltoolkit.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_admin_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\transport.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_service.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_admin_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_internal_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_kernel.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_trace_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_util.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\charsets.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jce.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jsse.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\rt.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\local_policy.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\US_export_policy.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\sunrsasign.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\lib\tools.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
Starting SCS-Instance
Executing SCS-startup-command: L:\SAP\NSP\SYS\exe\run\startsap.exe name=NSP nr=00 SAPDIAHOST=ammersee
Execute in current working dir: L:\SAP\NSP\home
Start external command...
\ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ STARTSAP continues...
Process exited with rc: 0
SUCCESS: Execution of step: >> StartSCSInstance <<
 finished successfully.
 Elapsed time: 00:00:23 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StopSCSInstance
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:42:32
ACTION: * Logfile: steps.StopSCSInstance.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
Checking running engine process via sapcontrol and wait for stopped
Checking on: SCS
Stop instance with cmd: L:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host ammersee -function StopWait 300 10
Stop instance in directory: L:\SAP\NSP\SYS\exe\run
Start external command...
08.01.2007 20:42:33
Stop
OK
08.01.2007 20:42:33
StopWait
OK
Process exited with rc: 0
Start external command...
08.01.2007 20:42:33
GetProcessList
OK
0 name: msg_server.EXE
0 description: MessageServer
0 dispstatus: GRAY
0 textstatus: Stopped
0 starttime: 2007 01 08 20:42:20
0 elapsedtime: 0:00:13
0 pid: -1
Process exited with rc: 4
SUCCESS: Execution of step: >> StopSCSInstance <<
 finished successfully.
 Elapsed time: 00:00:01 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateXUserEntry
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:42:34
ACTION: * Logfile: steps.CreateXUserEntry.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateXUserEntry <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: RestartServiceViaSAPControl
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:42:34
ACTION: * Logfile: steps.RestartServiceViaSAPControl.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
Restarting service via sapcontrol
Restart service with cmd: L:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host ammersee -function RestartService
Restart service in directory: L:\SAP\NSP\SYS\exe\run
Start external command...
08.01.2007 20:42:35
RestartService
OK
Process exited with rc: 0
SUCCESS: Execution of step: >> RestartServiceViaSAPControl <<
 finished successfully.
 Elapsed time: 00:00:30 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: InstallMMC
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:43:06
ACTION: * Logfile: steps.InstallMMC.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
INSTALL_MMC: Prepare to extract the SAPMMC
SAPMMC already extracted on cd. don't extract it a secon time.
INSTALL_MMC: Start to copy dll to SYSTEM32 directory
INSTALL_MMC: Copy sapmmc.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy sapmmcada.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy sapmmcdb6.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy sapmmcinf.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy sapmmcms.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy librfc32.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Start to copy the help file
INSTALL_MMC: Copy sapmmc.chm to H:\WINDOWS\help\
INSTALL_MMC: Start to copy the msc file
INSTALL_MMC: Copy sapmmc.msc to H:\WINDOWS\
INSTALL_MMC: Start to register dll
INSTALL_MMC: Register sapmmc.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmc.dll
INSTALL_MMC: Register sapmmcada.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcada.dll
INSTALL_MMC: Register sapmmcdb6.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcdb6.dll
INSTALL_MMC: Register sapmmcinf.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcinf.dll
INSTALL_MMC: Register sapmmcms.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcms.dll
SUCCESS: Execution of step: >> InstallMMC <<
 finished successfully.
 Elapsed time: 00:00:01 [HH:mm:ss]
Process exited with rc: 0
=End of install.log ====================

Installation of MaxDB 7.8 on Windows 7 stalls

Similar Messages

Maybe you are looking for