Installation of MII 12.1 on AIX 5.3 TL8 Operating System

Hi All,
I think Ramp-up for MII 12.1 is nearing its end and MII 12.1 getting ready for release.
One of our client wants to install MII 12.1 in AIX 5.3 TL8 Operating System.
since installation guide for 12.1 is not yet released i went through the installation guide of 12.0 but could not find detailed installation procedure for AIX Operating System.
Installation guide was based on windows 2003 server.
so can anyone help me out with the detailed procedure for installing MII 12.1 in AIX operating system.
Assumption is that NW CE is already installed.
Thanks in advance
Shyam

hi shyam,
i have the copy of the installation guide for sap mii 12.1. I am not sure whether that can be installed on the aix operating system or not. however, you can get the installation guide from sap marketplace .. i have downloaded the guide from the service marketplace.
Hope it helps !!!
Thanks,
Amit

Similar Messages

OUI-18001:operating system AIX is not supported.

Hi All,
I am installing my NW 7.0 SR2 system on AIX and oracle 10.2.0.2.
During database installation, when RUNINSTALLER is doing the prerequisite check it is showing me error:
OUI-18001: operating system AIX is not supported.
My AIX system is of version 5300-10-01.
Its very strange that it is giving error for AIX 5.3 ML 10. And in log it is showing that tool is expecting result 5200.004 or 5300.002.
Is it true that for AIX 5.3 ML 10 is not supported for oracle ?
Thanks
Sunny

Dear Sunny,
As an alternative, you can adjust oraparam.ini file with your operating system version detail.
Please refer the following SAP Notes carefully :
[SAP Note 980426 - Oracle 10.2 Software installation on new operating systems|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=980426]
[SAP Note 833766 - Oracle Database 10g: Software installation problems 10.1.0|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=833766]
I hope this info. will be helpful.
Regards,
Bhavik G. Shroff

Not able to install Oracle 10G on AIX 5.3 64-bit system

Hi,
i have got the software in DVD i have mounted the dvd on the filesystem
/dev/cd0 ---- /mnt (mnt folder contains the software), Have done following things to install but got following errors....
#cd mnt
# ls
client companio doc index welcome.htm
clusterw database gateways index.pdx
$cd database
# ls
doc install response rootpre runinsta stage welcome.htm
#cd rootpre
loadext orclclus pw_sysc2 pw_sysc3 pw_sysca rootpre.sh
# ./rootpre.sh
Required file ./pw-syscall32 is missing.
Aborting pre-installation procedure. Installations of Oracle may fail. // wat does this mean is that file belongs to operating system or missing in the source DVD
# /mnt/database/runinsta
Your platform requires the root user to perform certain pre-installation
OS preparation. The root user should run the shell script 'rootpre.sh' be
fore
you proceed with Oracle installation. rootpre.sh can be found at the top
level
of the CD or the stage area.
Answer 'y' if root has run 'rootpre.sh' so you can proceed with Oracle
installation.
Answer 'n' to abort installation and then ask root to run 'rootpre.sh'.
Has 'rootpre.sh' been run by root? [y/n] (n)
y
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-06-04_12-20-58PM. Please wait ...
Error in writing to directory /tmp/OraInstall2007-06-04_12-20-58PM. Please ensure that this directory is writa
ble and has atleast 69 MB of disk space. Installation cannot continue.
: Error 0
//////// I checked that in tmp folder i have got more than 69MB (i have 2 Gb )
/////// also created folder /u01/app/oracle and mounted in seperate volume which has
/////// 7GB space...
# cd ..
# cd install
# ls
addnode.sh images oneclick.pro .oui response unzip
clusterp.ini lsnodes oraparam.ini resource runinsta.sh
# ./runinsta.sh
./runinsta.sh[3]: ./runInstaller: not found.
Any Help would be appreciated.... struggling to install it.
Thanks & Regards
Bhanu

Hi,
I'm also facing some issues with respect to installation.
The oracle installer is getting started but the GUI screen is
not appearing.The installer is getting stuck with the following error
message.
INFO: Created system preferences directory in java.home".
I also tried starting utilities like xclock which is also not getting started.
Any suggestions would be really appreciated.
Regards,
Mahesh.

8.1.7 Installation Problem on Pentium IV Sony VAIO PCV-RX651 with XP Operating System

Have problem installing Oracle 8i Enterprise Edition on a SONY VAIO with XP Personal Edition. The "Explore CD" and "Browse Documents" buttons of the Oracle Universal Installer/Autorun responded but the "Install/DeInstall Products" button did not. Oracle 8i DB from the same CD was installed and ran just fine on a Pentium III Toshiba laptop with Win2000 ?! Please help.
Thanks.
CNguyen
[email protected]

================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY

VMWARE Server2012RT Installation failed with option: I will install the Operating System later

Hello, first sorry for my englich but I hope it wille ok for this Issue.
I have instelled the Win2012RT Server in VMware but the Installtion failed with this error:
Ok i chose the option: "I will install the Operating System later.",
and also tried
this:
http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
However, I always get
this displayed:
Last Log entry is this one:
2014-05-07T09:42:03.962+02:00| vmplayer| I120: VMMgr: Finished opening VM at /vm/#cf2324dcf779001d/ from G:\VMs\Server2012RTVmware.vmx
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: main UI rect: 687x619 @ 948,249
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Found 0 present screens
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Windows for extra guest monitors will not be shown
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: setting main view to all displays
2014-05-07T09:42:03.978+02:00| vmplayer| I120: SnapshotTree: Emitting refresh (G:\VMs\Server2012RTVmware.vmx)
2014-05-07T09:42:04.009+02:00| vmplayer| I120: VMHSVMCbPower: G:\VMs\Server2012RTVmware.vmx, Setting state of VM to powerOn with option soft
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Stats VMX "G:\Programme2tePlatte\vmware-vmx-stats.exe" not found. Using standard VMX "G:\Programme2tePlatte\x64\vmware-vmx.exe"
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VigorClient_StartAndConnect Failed: Message
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Pending power op found, completing.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Clearing execReqPath
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: VMHSStartVmxVigorCb: vmPath=/vm/#cf2324dcf779001d/ status=error
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.040+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: Setting power state poweredOff
2014-05-07T09:42:04.056+02:00| vmplayer| I120: Internal VMDB error: VMDB failure (-1)
2014-05-07T09:42:04.056+02:00| vmplayer| I120: VMMgr::CloseVM: closing VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.056+02:00| vmplayer| I120: DlgUI: Error while powering on: Internal error.
2014-05-07T09:42:04.087+02:00| vmplayer| I120: VMMgr::OnVMDestroyed: cleaning up after destroyed VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::SetAttached: detach
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::OnSetAttachedCompleted
2014-05-07T09:42:04.118+02:00| vmplayer| I120: FILE: FileDeletionRetry: Non-retriable error encountered (C:\Users\Michael\AppData\Roaming\VMware\preferences.ini~): Unknown error 2 (0x2) (2)
2014-05-07T09:42:07.488+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:42:09.874+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
2014-05-07T09:44:13.286+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:44:13.473+02:00| vmplayer| I120: Cmd /host2/#_client/util/file/cmd/##135/op/stat/ failed: Invalid path
2014-05-07T09:44:17.061+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
Does anyone have
an idea maybe??
Vmware Version is: 6.0.2 build-1744117
Host: Windows 7 Enterprise, 64-bit 6.1.7601, Service Pack 1
WIN2012RT Iso is: 9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_DE-DE-IR3_SSS_X64FREE_DE-DE_DV9.ISO DOWNLOAD: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx

Ok. I could finde out the Problem.
I uninstalled VMware witht RevoUninstaller and deleted all Vmware sysfolders and all regKeys.
Important note:
The first Installtion was on the 2nd Hard disk on my PC. These Harddisk was Connected via USB3 Port. VMware was successfully installed, and via the standart installation procedure the ISO files could be installed in Vmware, but the problem persist with
WIN2012RT server.
After a new installation of VMware into the Local C: Drive. The Win2012RT.Iso could be installed. With this procedure
without Issues: http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
ISO Download: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx

What is my operating system in regards to my printer installation?

When trying to install the drivers and software for your printer from the HP website, it is required to know both your operating system and your system type.
To determine if you have Windows or Mac, below is the icon you will find that is often referred to as the Start Button.
Windows 8 Windows 7 Windows Vista Windows XP Mac OS X
If you do not see either of these icons, then please review the owner's manual of your computer or find a section dedicated to product information or in the help section of the software/device you are using.
Click here if you do not see your operating system listed under the driver section of your printer's support website.
In earlier Windows versions: Select the Start button icon and right-click on Computer (Win7 or Vista) or My Computer (XP) and left-click on "Properties" at the bottom of the gray pop-window. Properties will display the Windows edition which contains information on which version of Windows you are using, the service pack, and further down you will find the system type which will indicate whether it is 32-bit or 64-bit. If you do not see a version type, it is likely a 32-bit Windows XP.
*Note: Windows Starter Editions can cause problems and errors and thus limiting you to strictly a USB connection during the installation and continued use of the printer's software.
In Windows 8: Right-click or tap and hold the lower left corner of the screen and then click or tap System in the menu. Find System Type in the System Window, and then note whether your operating system is 32-bit or 64-bit.
Click here to access the HP Support website regarding operating system types for more information.
Mac OS X: For information regarding your OS version click on the Apple () to access the menu and choose "About This Mac" and you will be able to tell which version you are running which is essential for installing the proper printer software.
Common Mac OS X have different names for their versions:
10.5 - Leopard
10.6 - Snow Leopard
10.7 - Lion
10.8 - Mountain Lion
Each version before and after the ones listed above also have additional names. Click here to access the Mac Support website for more information.
Linux print drivers: HP has designed what is noted as HPLIP (HP Linux Imaging and Printing) software to include the driver, the toolbox, and the driver installer into one package. This software is designed to work for nearly every Linux distribution available. Click here to download the latest HPLIP software for your printer.
Be cautious about third-party websites offering downloads to certain HP software, especially if you are required to pay for it or pay for a tool to diagnose any issues you are having. Most HP download packages include the scanning software such as HP Solution Center or HP Image Zone. Specific software installed is not downloaded separately and therefor, if you cannot find it for free through the HP website, then be careful of what other companies are offering. You are putting your system at risk by downloading any software from an unknown manufacturer such as viruses, malware, or other security factors. Take precautions to protect yourself before you install any software from a third-party site.
If you have any questions regarding any of the information above, feel free to post about it. The HP Consumer Forum is a great place to look for expert advice regarding small to medium-sized printers (Officejet, Photosmart, Deskjet), along with how to install, update, or resolve other installation errors.
If you have questions regarding a large commercial-sized printer, seek additional expert advice at the HP Enterprise Business Community regarding large LaserJets, ScanJets, and DesignJets.
Lastly, if you just need a quick reference to a question regarding your printer or computer, click here for immediate access to your device's support website.
Thank you for being a part of the HP family and community.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Your plugins list shows outdated plugin(s) with known security and stability risks.
# Next Generation Java Plug-in 1.6.0_16 for Mozilla browsers
Update the [[Java]] plugin to the latest version.
See http://java.sun.com/javase/downloads/index.jsp#jdk (you need JRE)

I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

SCCM 2012 - Adding Operating System Installer (The specified path does not contain a valid operating system ..)

I have encountered the dreaded "The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path" message that seems to be popular in many forums .... BUT, so far none of the "solutions"
have fixed the problem (of I don't understand the fix)
Configuration
SCCM 2012 SP1 5.0.7804.1000
WADK 8.100.26629.0 < Suggested Fix
Server 2008 R2
SCCM Administrator with UserID = SCCMAdmin
Steps / Fixes I have followed
I have configured a administrative share
\\caleb\sources$ to hold directories (such as Apps, Drivers, and OS) with the following NTFS Permissions
EVERYONE has Read and Execute, List folder, Read permissions<o:p></o:p>
SYSTEM has Full Control
<Suggested Fix
SCCMManagers (our group that has all SCCMManagers) has Full Control<o:p></o:p>
SCCMAdmin (the SCCM Admin account that we are using to import image) has Full Control<o:p></o:p>
Local Administrators (the local machine administrator) has Full Control
<Suggested Fix
<o:p></o:p>
Another Fix is to explicitly grant all permissions to the SCCM Administrator
<Suggested Fix
>Administrative Users ...
Properties of the SCCM Administrator (for us that is SCCMAdmin) has all the boxes checked<o:p></o:p>
Another suggestion I was able to glean was to Specify the Network Access Account
so I configured SCCMAdmin as the Network Access Account.
Another potential fix is that the image ISO file that has been downloaded is corrupt.   So, I downloaded the Win 7 (and Win 8.1) ISO's from MSDN and did a Checksum check.
I then mounted the ISO (on 2008R2 I use VirtualClone Drive) and copied the contents of the image to
E:\Sources\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896 for Windows 7 with SP1
To double check,
I computed the Hash on the Install.WIM located in the Sources directory and compared with
the computed Has Tag for the Install.WIM on the ISO Image ... and the Hash tag of the WIM's matched (extracted vs what is contained within the ISO)<o:p></o:p>
I tried to load the images into SCCM 2012 using the "Operating System Installers" option
UNC to installer
\\caleb\sources$\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896
Then I receive the lovely message <o:p></o:p>
"The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path"<o:p></o:p>
<o:p> </o:p>
From
C:\Program Files (x86)\Microsoft Configuration
Manager\AdminConsole\AdminUILog\SmsAdminUI.log<o:p></o:p>
<o:p> </o:p>
\r\nSystem.Management.ManagementException\r\nGeneric failure \r\n
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus
errorCode)
   at System.Management.ManagementObject.InvokeMethod(String
methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
   at
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String
methodClass, String methodName, Dictionary`2 methodParameters, Boolean
traceParameters)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Failed to get the image property from the source WIM
file due to error 80070002";
ErrorCode = 2147942402;
File ="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspimagepackage.cpp";
Line = 586;
Operation = "ExecMethod";
ParameterInfo = "SMS_OperatingSystemInstallPackage";
ProviderName = "WinMgmt";
StatusCode = 2147749889;
\r\n<o:p></o:p>
What am I missing ???? I assume something simple but, darn I'm stumped!!!

Hi,
Configuration Manager version
Windows AIK or Windows ADK Version
Windows PE versions for boot images customizable from the Configuration Manager console
Supported Windows PE versions for boot images not customizable from the Configuration Manager console
System Center 2012 Configuration Manager with no service pack
Windows AIK for Windows 7
Windows PE 3
None
System Center 2012 Configuration Manager with SP1
Windows ADK for Windows 8
Windows PE 4
None
System Center 2012 Configuration Manager with SP1 and cumulative update 2
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11
System Center 2012 Configuration Manager with SP1 and cumulative update 3
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11 and Windows PE 5
System Center 2012 R2 Configuration Manager
Windows ADK for Windows 8.1
Windows PE 5
Windows PE 3.11
Please try to install the Windows ADK for Windows 8.
http://www.microsoft.com/en-us/download/details.aspx?id=30652
For more information, please review the link below:
http://technet.microsoft.com/en-us/library/gg682187.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to install photoshop elements 13 on new computer. Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

Unable to install photoshop elements 13 on new computer (Windows 8.1 OS). Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

download the 64bit installer,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Can you download a 32 bit installer for photoshop elements 12 to install on a 64 bit system (windows 7)

can you download a 32 bit installer for Photoshop elements 12 to install on a 64 bit system (windows 7). Thanks in advance

yes, if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not listed in applications. have downloaded install app but cannot carry out the installation. am informed flash player is blocked.

operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not in application. have downloaded install app but cannot carry out the installation. can anyone help? am unable to use any application requiring flash player.
thank you!

Hi Anne,
Your version of Safari is still supported. Please see Adobe Flash Player | Tech specs for supported OS and browsers.
If the Flash Player plugin is in the Plug-ins (disabled) folder it's because it's an older version that Apple has disabled in Safari. This has nothing to do with whether or not Flash Player supports the browser.
I'm not sure what you mean by "when i click on flash player itself i am told there is no application to open it." Flash Player.plugin only works in the browser to view Flash content in the browser. The plugin does not open files outside of the browser. If you have SWF files you'd like to view outside of the browser, then you'll need the Flash Player projector. However, based on your previous comments this doesn't appear to be what you are trying to do.
Google Chrome does embed Flash Player in it, while Firefox does not. Mozilla has also recently started blocking older versions of Flash Player in Firefox similar to what Apple is doing in Safari.
Following the 'clean install' instructions should result in you having the latest version of Flash Player installed that will not be blocked by the browser.
Maria

Installation and deployment of operating system, applications and patches in Unix environment

Is it possible to use Configuration Manager 2012 (or 2012 R2) to perform remote installation of operating system, applications and patching in a Unix environment?
Balaji Kundalam

ConfigMgr does not support Operating System Deployment for non-Windows OS flavors.
You can use the ConfigMgr client on a Unix device to install applications and to instruct the device to install patches. Basically, the client will download files and run a script against them. If there is a patch manager in your flavor of *nix, you
can run a script to install the patches.
See the supported operating systems here:
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigLnUClientReq
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Installation of OWB 10.2.0.1 - check operating system version failed

Hi,
I'm trying to install OWB 10.2.0.1 on Windows 2008 server to use it as OWB client.
But I'm not able to continue with the installation due to following error:
Checking installer requirements....
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 FAILED
Any insight on this would be of great help.
Thanks,
Shaik.

Hi Sutirtha,
Executing the setup in cmd with -ignoreSysPrereqs option as well ending up with the error, in the next step itself.
It says, Abnormal program termination. An internal error occured.
Any suggestion on, which one of below OWB s/w is compatible with Windows 2008 Server R2, 64 bit OS.
---for Microsoft Windows 32-bit, 64-bit (AMD64 / EM64T)
---for Microsoft Windows (64-bit Itanium)
I'm trying this installation with "for Microsoft Windows 32-bit, 64-bit (AMD64 / EM64T) "
Thanks in Advance,
Shaik

Installation of MII 12.1 on AIX 5.3 TL8 Operating System

Similar Messages

Maybe you are looking for