Installation of ODAC 11g on Windows XP service pack3

Am trying to install ODT with ODAC1110720, but when the install has progressed to about 40% it gives the following error: unhandled win32 exception occured in javaw.exe[2672]. The value in the brackets change. This error occurs when the Oracle universal installer files are being copied. Any suggestions to what could be the problem?

This is just a guess -- but try going to the Control Panel in XP and go to "Add/Remove Programs". From there, uninstall Java.
Then try installing ODAC again.

Similar Messages

Can't get past OCX error when installing ODAC 11g on Windows Server 2003

I have been trying to install ODAC 11g on Windows Server 2003 and can't get past the OCX error when registering oravsdbgeng11w.dll. I've read every message on this forum even remotely related to this problem and tried every solution offered. I have done a clean install into a new Oracle home, and made sure Instant Client is always included. All service packs and automatic updates have been installed. For what it's worth I have successfully installed ODAC 11g on Windows XP Pro.
If anyone out there has been able to get this up and running and would care to share the wisdom that would be greatly appreciated.
Thanks!
Michael Young
Latitude Geographics
Victoria, BC

Michael, as you already noticed, every time I have seen this issue it has been because ODT was being installed into an Oracle home where no client exists, or perhaps installed into an old oracle home where the client was an old version (eg Oracle10), or the client was broken. Usually though, the user unchecked the instant client checkbox during the ODAC install.
So you say you checked instant client and you still got the error? That doesn't add up...
Are you using 32-bit windows? If you are using 64 bit windows be sure to tell us.
Why don't you try avoiding using instant client at all, in case it is somehow not getting installed properly.
You can do this as follows:
1) Under the download links on OTN, go to the database download page.
2) Download the Oracle Database client 11g for Microsoft Windows
3) Run this installer and Install ODP.NET 1.x and 2.x into a new Oracle home from this client install, but nothing else. If ODP.NET is not listed there (it has been a long time since I looked at that) than just install a minimal Oracle client install.
4) Close the installer
5) Go back and install ODAC and this time choose "Oracle Server" radio button during the install (rather than the client install)
6) Install ODT and ODP.NET at least and be sure they are being installed into the Oracle home created in the first steps above.
This will avoid use of Instant Client and will hopefully avoid the OCX error. Let me know if this solves your problem.
Christian

Error running universall installer using Oracle 11g on Windows server 2003

Hi,
I want to uninstall Oracle 11g on Windows server 2003 and when I run universall installer I receive the following error
Checking swap space: 0 MB available, 500 MB required.
Please advise how to resolve this error and the procedure to uninstall Oracle 11g on Windows server 2003
Thanks,
Ant

Hi;
For swap problem, please check:
Swap space problem on Windows XP
http://www.pcnineoneone.com/howto/swpfile1.html
For remove process please check:
Oracle 11g on Windows Srv 2003
WIN: Manually Removing all Oracle Components on Microsoft Windows Platforms [ID 124353.1]
Regard
Helios

Rescue And Recovery Installation On Clean Install Of Windows XP Service Pack 2

Hey,
I have recently purchased a refurbised IBM ThinkPad T40 2373-82M laptop computer. When I received the computer it did not have any recovery partition or recovery CD's that came with it. I then installed my own personal copy of Windows XP Service Pack 2 on the machine and installed drivers and applications individually by downloading them off the Lenovo support website. However, I have attempted to install the latest version of the ThinkVantage Rescue And Recovery Program (Version 4.20) on my computer but I end up with the following error: 'There is not enough free space on the computer to install or upgrade the Rescue and Recovery environment'. When I did a full clean install on the system I deleted all partitions that were on the computer at the time during the Windows XP installation and made a single NTFS partition. There were two 20GB partitions on the hard drive when I bought it, but neither of them were the IBM Rescue and Recovery partition. Could it be possible for me to install this software on my laptop, and make a Rescue and Recovery partition, now and make it the same way it would of been when it left the IBM factory?
Any help would be greatly appreciated.
Cheers
Ash.
Message Edited by asin123 on 04-04-2008 10:45 PM
Moderator Note; Please do not duplicate posts - Thread locked.
Message Edited by andyP on 04-04-2008 02:11 PM

asin123 wrote:
I hope this solution is easy to follow and helps anyone who has had the same problems as me.
Thanks for coming back and sharing the solution with others!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Installation of Oracle 11g on Windows 8

I am trying to install Oracle 11g Database in my windows 8 system.
Whenever i click on the setup.exe the installer window pops up and nothing happens.
I am running it as an administrator.
I need some help on this. I have tried to run in compatibility mode as well but help.

994288 wrote:
I am trying to install Oracle 11g Database in my windows 8 system.Pl identify exact version. Neither 11gR1 not 11gR2 are supported on Win 8 - supported OS versions are documented - http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
Certification of Win 8 is expected with a future release - see http://www.oracle.com/technetwork/database/windows/tech-info/sod-oracle-db-win8-win2012-1853201.pdf
You have three options
1. Wait for this future Oracle release
2. Downgrade your OS to a supported version.
3. Install VM software (like Virtualbox), create a VM, install a supported OS in the VM, then install 11gR2 in the VM - see my blog (linked in my profile) for a detailed example
Whenever i click on the setup.exe the installer window pops up and nothing happens.
I am running it as an administrator.
I need some help on this. I have tried to run in compatibility mode as well but help.HTH
Srini

Installation of oracle 11g on windows 7 professional

Can I install oracle database 11g standard edition one on windows 7 professional edition

HI,
Can I install oracle database 11g standard edition one on windows 7 professional editionAs i know Windows 7 is not yet certified with any oracle version. I Installed oracle 11g client software successfully on windows 7.
To check certification: https://support.oracle.com/CSP/ui/flash.html#tab=Certification(page=Certification&id=g608mkh6())
Also Refer: Install Oracle 11g client on Windows 7
Regards,
X A H E E R

Install sql server 2008 r2 in windows xp service pack3 gives error

After Installing Support Files, a pop up occurs stating that Microsoft SQL Server 2008 R2 installation has encountered an error.
Error Signature: EventType : sql100msi P1 : 10.50.1600.1 P2 : 10.50.1600.1
P3 : sqlncli.msi P4 : 0x2d2816fe P5 : 0x1603 P6 : install_sqlncli can anyone help me

Hello people. I am having much problem trying to get the SQL installed on my computer.
I just added half of error log:
=== Verbose logging started: 5/1/2014 13:27:12 Build type: SHIP UNICODE 4.05.6001.00 Calling process: f:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x86\setup100.exe
===
MSI (c) (94:CC) [13:27:12:770]: Resetting cached policy values
MSI (c) (94:CC) [13:27:12:770]: Machine policy value 'Debug' is 0
MSI (c) (94:CC) [13:27:12:770]: ******* RunEngine:
******* Product: f:\41ab42c0be4c457100b4\1033_ENU_LP\x86\setup\x86\sqlncli.msi
******* Action:
******* CommandLine: **********
MSI (c) (94:CC) [13:27:12:770]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (94:CC) [13:27:12:770]: Grabbed execution mutex.
MSI (c) (94:CC) [13:27:12:770]: Cloaking enabled.
MSI (c) (94:CC) [13:27:12:770]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (94:CC) [13:27:12:770]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (2C:A0) [13:27:12:833]: Running installation inside multi-package transaction f:\41ab42c0be4c457100b4\1033_ENU_LP\x86\setup\x86\sqlncli.msi
MSI (s) (2C:A0) [13:27:12:833]: Grabbed execution mutex.
MSI (s) (2C:6C) [13:27:12:848]: Resetting cached policy values
MSI (s) (2C:6C) [13:27:12:848]: Machine policy value 'Debug' is 0
MSI (s) (2C:6C) [13:27:12:848]: ******* RunEngine:
******* Product: f:\41ab42c0be4c457100b4\1033_ENU_LP\x86\setup\x86\sqlncli.msi
******* Action:
******* CommandLine: **********
MSI (s) (2C:6C) [13:27:12:848]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (2C:6C) [13:27:13:379]: File will have security applied from OpCode.
MSI (s) (2C:6C) [13:27:13:629]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'f:\41ab42c0be4c457100b4\1033_ENU_LP\x86\setup\x86\sqlncli.msi' against software restriction policy
MSI (s) (2C:6C) [13:27:13:645]: SOFTWARE RESTRICTION POLICY: f:\41ab42c0be4c457100b4\1033_ENU_LP\x86\setup\x86\sqlncli.msi has a digital signature
MSI (s) (2C:6C) [13:27:13:942]: SOFTWARE RESTRICTION POLICY: f:\41ab42c0be4c457100b4\1033_ENU_LP\x86\setup\x86\sqlncli.msi is permitted to run at the 'unrestricted' authorization level.
MSI (s) (2C:6C) [13:27:13:942]: End dialog not enabled
MSI (s) (2C:6C) [13:27:13:942]: Original package ==> f:\41ab42c0be4c457100b4\1033_ENU_LP\x86\setup\x86\sqlncli.msi
MSI (s) (2C:6C) [13:27:13:942]: Package we're running from ==> f:\WINDOWS\Installer\250ed1.msi
MSI (s) (2C:6C) [13:27:13:958]: APPCOMPAT: looking for appcompat database entry with ProductCode '{4AB6A079-178B-4144-B21F-4D1AE71666A2}'.
MSI (s) (2C:6C) [13:27:13:958]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (2C:6C) [13:27:13:973]: MSCOREE not loaded loading copy from system32
MSI (s) (2C:6C) [13:27:13:989]: Machine policy value 'TransformsSecure' is 0
MSI (s) (2C:6C) [13:27:13:989]: User policy value 'TransformsAtSource' is 0
MSI (s) (2C:6C) [13:27:13:989]: Machine policy value 'DisablePatch' is 0
MSI (s) (2C:6C) [13:27:13:989]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (2C:6C) [13:27:13:989]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (2C:6C) [13:27:13:989]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (2C:6C) [13:27:13:989]: APPCOMPAT: looking for appcompat database entry with ProductCode '{4AB6A079-178B-4144-B21F-4D1AE71666A2}'.
MSI (s) (2C:6C) [13:27:13:989]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (2C:6C) [13:27:14:004]: Transforms are not secure.
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'F:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140501_131426\sqlncli_Cpu32_1.log'.
MSI (s) (2C:6C) [13:27:14:004]: Command Line: ADDLOCAL=SQL_SNAC_CORE,SQL_SNAC_SDK INSTALLSQLSHAREDDIR_32=F:\Program Files\Microsoft SQL Server\ IACCEPTSQLNCLILICENSETERMS=YES REBOOT=ReallySuppress MEDIAPACKAGEPATH=\1033_ENU_LP\x86\setup\x86\ EXTERNALMSICONTROL=1
CURRENTDIRECTORY=f:\41ab42c0be4c457100b4 CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=3988
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{79872AB7-3F02-4F99-BDA4-03BBC4644342}'.
MSI (s) (2C:6C) [13:27:14:004]: Product Code passed to Engine.Initialize: ''
MSI (s) (2C:6C) [13:27:14:004]: Product Code from property table before transforms: '{4AB6A079-178B-4144-B21F-4D1AE71666A2}'
MSI (s) (2C:6C) [13:27:14:004]: Product Code from property table after transforms: '{4AB6A079-178B-4144-B21F-4D1AE71666A2}'
MSI (s) (2C:6C) [13:27:14:004]: Product not registered: beginning first-time install
MSI (s) (2C:6C) [13:27:14:004]: Product {4AB6A079-178B-4144-B21F-4D1AE71666A2} is not managed.
MSI (s) (2C:6C) [13:27:14:004]: MSI_LUA: Credential prompt functionality not available on this operating system
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
MSI (s) (2C:6C) [13:27:14:004]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (2C:6C) [13:27:14:004]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (2C:6C) [13:27:14:004]: Adding new sources is allowed.
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
MSI (s) (2C:6C) [13:27:14:004]: Package name extracted from package path: 'sqlncli.msi'
MSI (s) (2C:6C) [13:27:14:004]: Package to be registered: 'sqlncli.msi'
MSI (s) (2C:6C) [13:27:14:004]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (2C:6C) [13:27:14:004]: Machine policy value 'DisableMsi' is 0
MSI (s) (2C:6C) [13:27:14:004]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (2C:6C) [13:27:14:004]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (2C:6C) [13:27:14:004]: Product installation will be elevated because user is admin and product is being installed per-machine.
MSI (s) (2C:6C) [13:27:14:004]: Running product '{4AB6A079-178B-4144-B21F-4D1AE71666A2}' with elevated privileges: Product is assigned.
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding ADDLOCAL property. Its value is 'SQL_SNAC_CORE,SQL_SNAC_SDK'.
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding INSTALLSQLSHAREDDIR_32 property. Its value is 'F:\Program Files\Microsoft SQL Server\'.
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding IACCEPTSQLNCLILICENSETERMS property. Its value is 'YES'.
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding REBOOT property. Its value is 'ReallySuppress'.
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding MEDIAPACKAGEPATH property. Its value is '\1033_ENU_LP\x86\setup\x86\'.
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding EXTERNALMSICONTROL property. Its value is '1'.
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'f:\41ab42c0be4c457100b4'.
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '3988'.
MSI (s) (2C:6C) [13:27:14:004]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (2C:6C) [13:27:14:004]: DisableAutomaticApplicationShutdown system policy is ignored on this version of Windows.
MSI (s) (2C:6C) [13:27:14:004]: TRANSFORMS property is now:
MSI (s) (2C:6C) [13:27:14:004]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
MSI (s) (2C:6C) [13:27:14:004]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\Application Data
MSI (s) (2C:6C) [13:27:14:020]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\Favorites
MSI (s) (2C:6C) [13:27:14:020]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\NetHood
MSI (s) (2C:6C) [13:27:14:020]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\My Documents
MSI (s) (2C:6C) [13:27:14:020]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\PrintHood
MSI (s) (2C:6C) [13:27:14:020]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\Recent
MSI (s) (2C:6C) [13:27:14:020]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\SendTo
MSI (s) (2C:6C) [13:27:14:020]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\Templates
MSI (s) (2C:6C) [13:27:14:036]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\All Users\Application Data
MSI (s) (2C:6C) [13:27:14:036]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\Local Settings\Application Data
MSI (s) (2C:6C) [13:27:14:036]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\My Documents\My Pictures
MSI (s) (2C:6C) [13:27:14:036]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\All Users\Start Menu\Programs\Administrative Tools
MSI (s) (2C:6C) [13:27:14:036]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\All Users\Start Menu\Programs\Startup
MSI (s) (2C:6C) [13:27:14:036]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\All Users\Start Menu\Programs
MSI (s) (2C:6C) [13:27:14:036]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\All Users\Start Menu
MSI (s) (2C:6C) [13:27:14:051]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\All Users\Desktop
MSI (s) (2C:6C) [13:27:14:051]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\Start Menu\Programs\Administrative Tools
MSI (s) (2C:6C) [13:27:14:051]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\Start Menu\Programs\Startup
MSI (s) (2C:6C) [13:27:14:051]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\Start Menu\Programs
MSI (s) (2C:6C) [13:27:14:051]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\Start Menu
MSI (s) (2C:6C) [13:27:14:051]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\Rashmi\Desktop
MSI (s) (2C:6C) [13:27:14:051]: SHELL32::SHGetFolderPath returned: F:\Documents and Settings\All Users\Templates
MSI (s) (2C:6C) [13:27:14:051]: SHELL32::SHGetFolderPath returned: F:\WINDOWS\Fonts
MSI (s) (2C:6C) [13:27:14:051]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16

OBIEE 11g on Windows 7 64 bit - Error while configuring????

Hi Experts,
I am installing OBIEE 11g on Windows 7 64 bit. And I followed below steps:
1. Installed JDK 64 bit.
2. Installed Weblogic Server with 64 bit JDK.
3. Installed OBIEE 11g - Software only Installation.
4. Ran configuration script. cofig.bat.
5. Configuration Wizard opened and during the configuration process(step 10 of 11) got an error. Refer below screen shot for the error.
6. I got the same error when I tried installing 11g on Win server 2003 32 bit and I installed JRocket MissionControl and reinstalled 11g and there are no errors.
7. So, remembering that I installed JRocket Mission Control 64 bit.
8. Un installed previous 11g.
9. Reinstalled 11g on Windows 7 64 bit.
10 And coming to configuration part it gave same error. Don't know what to do.............can any one help me at this point.
http://img690.imageshack.us/img690/1342/obiee11gconfigerror.jpg
Thanks in advance,
DK

Hi All,
I've got the same error but with the installation of OBIEE 11g on Windows 32-bit.
I also tried to continue the installation, but I've got another error in the Executing: opmnctl start coreapplication_obisch1.
Even with those errors, I finished the installation but of course I've some problem with the presentation server and webLogic, becasue they're not configured properly.
Any idea how to solve the problem?
Thanks

Installing OBIEE 11g on Windows 7

Im having problems starting the installer for OBIEE 11g on Windows 7. I have changed the compatibility mode to every single operating system available but this does not work. I am also trying to run as Administrator. Thanks in advance

Make sure you have java and set to Windows path (and also classpath). I've done one Windows7 without any changes provided Java.

Installation of Oracle 11g 32 bit Client on Windows 7 (32 bit) laptop.

Hi,
I just got a new Laptop with Windows 7 (32 bit) operating system.
Has any one successfully installed Oracle 11g client on in Windows 7 environment and if so what are the steps involved.
In the past I have never had any trouble installing an Oracle client on a Windows work station.
Thanks,
Ashim.

Oracle hasn't officially supported 11g on windows 7. folks have installed it successfully too. Check the below threads.
Re: 11g R1 database installation is successful on windows 7 64-bit
Oracle 11g on Windows 7
Re: DB 11gR2 for Windows ??
HTH
-Anantha

Installing Oracle 11g on windows XP., after installation enterprize manager

Hello All,
kindly note that i am new to oracle and having a issue that i cant seem to figure out and hoping a experienced person can answer this.
i download oracle 11g for windows 32 bit on my laptop, go through the installation and use the option to crate a starter database.
meet all the pre- req and every thing goes smooth. database gets created, use sqlplus to connect ot the database also open the enterprise manager and and also see the GUI after logging in.
now what happens it works fine for a day or some times two and when i reboot the machine and go back and try to open the EM its gives me the error cant find the URL. i have tried it few times and it happens every time. i don't know what i am doing it wrong but for some reason the EM manager doesn't work . i can still log on the database using the sqlplus.
must thing must get changed ( may be the IP address or env some how). i really appreciate if some one can guide me in the right path.
Thanks in advance.

Thanks for the response,
well the laptop i am using is a work computer , i installed oracle so i can practice on it.. i Think the IP changes after a while. is that the reason?.. how can i remedy it do my EM works all the time?
Please advice.

Need installation document for OEM 11G on windows 2003(32 bit).

Hi,
As a part of my project, i need to install the OEM 11G on windows 2003(32 bit) machines and targets also windows 2003. there i need to install again agent 11g(11.1.0.1) and target DB is 10.2.0.4.
I have done the installation of OMS successfully and installed the agent 11g on target as well. i am facing challeges in configuring the database from OMS. i tried couple of options but nothing is working out. Finally i decided to cross check the installation procedure once again with the previously completed ones. could any body share the same.
in breif i have done following.
1) installed RDBMS 11G on OMS server.
2) insalled java 1.6.18.
3) installed WLS 10.3.2
4) installed the OMS 11G(11.1.0.1)
On agent side i installed agent 11g(11.1.0.1) to monitor a database which is of 10.2.0.4 version.
agent,listeners are reflecting on OMS with up status but DB is showing as "metric collection error". i tried all the possible options like removing and reconfiguring and agent clearing and agent restart etc...but no use. also i in the Oracle installation document, they mentioned as we need to set user equavelence between OMS and agent server but not sure of this, which i have not done. is this compulsary?
Sorry for putting all the things in one single thread.
Thanks in-advance.
Regards
DBA.

Did you check if the database is configured in GC?
If you can't connect using sqlplus to the user dbsnmp make a connection to the database: alter user dbsnmp identified by <password> account unlock;
In GC go to Targets, All Targets select the DB concerned and hit Configure. Enter the dbsnmp user password etc. After a while you will see the result: DB shows Up (I hope)
Eric

Regarding installation and usage of oracle forms 11g on windows 7

dear all,
i am new to the oracle forms and reports feature. i tried installing forms and reports following certain steps which i could find from the internet, but it could not be installed.
i ended up crashing my system.can anyone of you help me in providing the step by step installation of oracle 11g forms and reports on windows 7 64 bit.
regards,
sreejith

When I was cleaning my email account i noticed message from OTN forum. I forgot to reply :/
I followed instructions from the message above and it worked. Oracle XE + PPRD (only forms to save disk space and RAM) + weblogic, i have also installed APEX 3.2.1. It all works at my win 7 system
There where one bug in forms builder database connector, solution was to replace it with the file from SQL*Plus (AFAIR it was tnsnames.ora file)
So thank you Chris999, you helped me a lot.

Installation on ORACLE 11g R2 on Windows

Hi ,
In the installation phase of 11g r2 i got installed successfully 11g R2 on windows environment. but during installation i ignored some pop menu that stating like em.war not found. etc..
I just given sqlplus in cmd prompt. struck with error.
Error 6 initializing SQL*Plus
SP2-0667: Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
Need someone help or guidline on this.
Thnks in advance!!!
Sakthi

SAKTHIVEL wrote:
Hi ,
In the installation phase of 11g r2 i got installed successfully 11g R2 on windows environment. but during installation i ignored some pop menu that stating like em.war not found. etc..
What is the exact version of Windows ? Are you saying you ignored warnings/errors during the install ?
>
I just given sqlplus in cmd prompt. struck with error.
Error 6 initializing SQL*Plus
SP2-0667: Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
Need someone help or guidline on this.
Thnks in advance!!!
SakthiHave you set the necessary environment variables required as per the Docs at http://docs.oracle.com ?
HTH
Srini

Windows XP Service Pack 2 Installer

So I have a relatively simple application. I it just reads and writes CAN data using a Vector CANcase USB CAN device, and these drivers. I developed the source in LabVIEW 2012 SP1 in Windows 7 x64. I built the EXE and it works fine, I then made an installer. Under the Additional Installers I only included the NI LabVIEW Run-Time Engine 2012 SP1 f9. I unchecked all the components under it because I knew I didn't need them.
I tested the installer on my XP SP3 machine and it worked great. Then another user wanted the software and had XP SP2. I tried the installer and it said it requires XP Service Pack 3 or newer. So I opened the project I used to make the installer, and under the "System Requirements" it already had the oldest option selected which was Windows XP Service Pack 2 or later.
My solution is to update the PC and it is in the process of doing that right now. So for me this is fixed, but is this an issue? And anyone else that sees this issue you aren't crazy.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Yes, I've had the same problem. I believe it had something to do with .NET (on which some NI components rely?) only being supported by XP SP3.
If you read here - it mentions that the latest service pack may be required for some operating systems.
The one thing that is weird is that the 2012 LV Runtime apparently supports all service packs of XP but the 2013 Runtime only supports SP3. Actually, looking at the download page for the 2012 SP1 F9 runtime it says it only supports XP SP3 so during one of the updates they must have changed the minimum requirement.
Maybe you could try installing an older version of the LV2012 runtime which works with SP2?
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Installation of ODAC 11g on Windows XP service pack3

Similar Messages

Maybe you are looking for