Installation of Oracle 10.2.0.3 on 32 bit windows 2008

I am trying to install oracle 10g on windows 2008. The installation process went smooth until it reached creating database. At that point when it reached 2% I am getting an error Ora 12560: TNS protocol adapter error. I tried to download the patch file 10.2.0.3 but i am not getting in to the metalink. Is this error related to the patch file? if so where can i get that patch file from?

hi,
i'm having the same issue.
so far, I realized that:
- bug number for this problem is 7263061
- patch for this bug seems to be number 7677780
(Opatch also needs to be upgraded, via patch 6880880)...
BUT (yes, there's a BUT...)
that patch applies to 10.2.0.4 base system, while Oracle.com indicates 10.2.0.3 for installing on a windows 2008 server 32bit, and I have a that windows 2008 server which is also domain controller, and need to install oracle on it.
SO... I'm stuck.
Still I haven't found a patch for 10.2.0.3 system.
I'm searching, anyway...
anybosy with a solution that applies?
thanks in advance!
cheers
Bernardo Volpi
bernardo (dot) volpi (at) publicatoscana (dot) it

Similar Messages

Accessing a 32 Bit Oracle 9.2 database from a 64 bit Windows 2008 Server

Hi Guys,
I hope someone might be able to help me I am trying to extract data from our existing oracle 9.2 Database onto our new 64 bbit 2008 server. The problem I seem to be having is that no matter what version of Oracle I try to install I'm not able to see any oracle Drivers in the ODBC\ODBC32 section.
I have tried both the 32 bit Oracle 10g ODAC 10.1.0.4.0 and Oracle 11g ODAC 11.1.0.7.20 with no luck, hopefully some one can point me in the right direction. I don't tthink installing the 64 bit would work as the database is 32 bit is this correct or should I be using the 64 bit.
Thanks in advance
D0n_mac

Hi,
You need to install 64 bit client if you're going to use it with a 64 bit app. You dont need to worry how many bits the server is, the client takes care of that.
Hope it helps,
Greg

Please help me to get Oracle 10.2.0.5 software for 64 bit Windows 2008 R2

Hi All,
Subject: Please help me to get Oracle 10.2.0.5 software for 64 bit Windows 2008 R2 operating system.
I am looking for Oracle 10.2.0.5 software to install in windows 2008 server (64 bit) R2. I tried with oracle download repository but unfortunately I couldnt find this software. In the below link I can see the product Oracle 10.2.0.5 - 64 bit (Itanium). I have tried to download and install in the server but I received in-compatible error message.
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
From the oracle support certification site I have found that the Oracle 10.2.0.5 is the compatible version to installed in windows 2008 server(64) R2.
I am trying very hard to find Oracle 10.2.0.5 - 64 bit. Can you please suggest me where I can download this software.
Please do the needful.
Regards,
Jame

Hi;
Which means, do i need to install 10.2.0.4 and then to upgrade 10.2.0.5 using patchset?10.2.0.1 is base relase 10.2.0.x is patchest. 10.2.0.5 cover previous patchest errors which mean you do not need install 10.2.0.4 than upgrade it 10.2.0.5
Regard
Helios

Installation of Oracle Database 10g 10.2.0.3 on Windows 2003 Server

Hi Guys,
We have to install Oracle Database 10g 10.2.0.3 on Windows 2003.
I read on net, metalink and OTN as well and it seems there is no single 10.2.0.3 setup available to do so.
One has to upgrade from earlier version to 10.2.0.3.
Is that so? Is this the only way?
I mean if we want new and fresh 10.2.0.3 then don't we have installer for it?
In this case we will have to install 10.1.0.2 and then upgrade? (we have 10.1.0.2 installable with us)
And if at all that is the only path available then for 10.2.0.3 on Windows 32 bit - Patchset 5337014 i.e. p5337014_10203_WINNT.ZIP from metalink is the correct patch?
Thanks in advance!
Av.

Hi guys,
I donwloaded patchset - 5337014, and in its readme it is specified to download and install patch - 5601428.
So I downloaded 5601428 and set ORACLE_HOME and then fired command -
D:\oracle_pathces\5601428>optach apply
and i got error saying -
This Oracle Home does not have components/versions required by the patch.
ERROR: OPatch failed during pre-reqs check.
Following is the command and its output,
D:\Oracle_Patches\5601428>opatch apply
"set PERL5LIB=D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\lib"
"D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\bin\MSWin32-x86\perl.exe D:\oracle\pro
duct\10.1.0\db_1\OPatch\opatch.pl ..."
OPatch Version 1.0.0.0.48
Perl Version 5.006001
Oracle Home = D:\ORACLE\PRODUCT\10.1.0\DB_1
Location of Oracle Inventory = D:\ORACLE\PRODUCT\10.1.0\DB_1\inventory
Oracle Universal Installer shared library = D:\ORACLE\PRODUCT\10.1.0\DB_1\oui\li
b\win32\oraInstaller.dll
Path to Java = "D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\ORACLE\PRODUCT\10.1.0\DB_
1\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
D:\oracle\product\10.1.0\db_1\OPatch\opatch.pl version: 1.0.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
This Oracle Home does not have components/versions required by the patch.
ERROR: OPatch failed during pre-reqs check.
D:\Oracle_Patches\5601428>
Probably thought that following is the culprit -
Location of Oracle Inventory Pointer = N/A
so fired -
D:\Oracle_Patches\5601428>optach lsinventroy
gave following output -
D:\Oracle_Patches\5601428>opatch lsinventory
"set PERL5LIB=D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\lib"
"D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\bin\MSWin32-x86\perl.exe D:\oracle\pro
duct\10.1.0\db_1\OPatch\opatch.pl ..."
Using ORACLE_HOME/oui to look up oui libs...
Oracle Home = D:\ORACLE\PRODUCT\10.1.0\DB_1
Location of Oracle Inventory = D:\ORACLE\PRODUCT\10.1.0\DB_1\inventory
Oracle Universal Installer shared library = D:\ORACLE\PRODUCT\10.1.0\DB_1\oui\li
b\win32\oraInstaller.dll
Path to Java = "D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\ORACLE\PRODUCT\10.1.0\DB_
1\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
""D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe" -classpath "D:\oracle\prod
uct\10.1.0\db_1\oui\jlib\OraInstaller.jar;D:\oracle\product\10.1.0\db_1\oui\jlib
\srvm.jar;D:\oracle\product\10.1.0\db_1\OPatch\jlib\opatch.jar;D:\oracle\product
\10.1.0\db_1\oui\jlib\xmlparserv2.jar;D:\oracle\product\10.1.0\db_1\oui\jlib\sha
re.jar;." -Dopatch.retry=10 -Dopatch.delay=30 opatch/LsInventory "D:\oracle\pr
oduct\10.1.0\db_1\oui" "d:\oracle\product\10.1.0\db_1" opatch.pl 1.0.0.0.48 FALS
E"
Retrieving inventory.
There is no Interim Patch
D:\oracle\product\10.1.0\db_1\OPatch\opatch.pl version: 1.0.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
OPatch succeeded.
So thought is my opatch the culprit? Its version as seen in above dump is - 1.0.0.0.48, so is that causing any problem? And if yes, then how to get it resolved?
FYI: OS - Win2003, DB - 10.1.0.2.0
Can any one help in this?
Thanks!
Av.

Installation of oracle ware house builder on linux 64 bit platform

Hi All,
Can anybody tell me the installation process of oracle ware house builder on linux 64 bit platform?
Thanks

Hi,
In the zip file there is a file called Readme.txt or Welcome.htm where you can find all of the steps you need to take to install the product.

Oracle Warehouse Builder 10.1.0.4 on Windows 2008 - 64 bits

Hi Gurus.
I'm currently working with a customer who wants to migrate all their database-servers to Windows 2008 on 64-bits processors. They're using Oracle Database Enterprise Edition 10g Release 2 (10.2.0.4) and Oracle Warehouse Builder (10.1.0.4). The OWB-clients will still run on Windows XP. I've used the "Certify"-funcionality on Metalink, but it doesn't really answer my questions. (It does* ansver some of my questions, but it also raises a few new ones....)
My main question is: Can you run serverside OWB 10.1.0.4 on Enterprise Edition 10.2.0.4 for Windows 2008 64-bits?
Thanks in advance:-)
Best regards
Helge
Edited by: user613304 on Mar 6, 2009 11:10 PM

No.
Oracle Warehouse Builder version 10.1.x was desupported on 16-JUL-2007.
The desupport notice is available on Metalink (Note 376384.1).
The Warehouse Builder installation as part of the 11.1.0.7 installation should be certified, but I cannot find specifics.

Oracle obdc driver 32-bit doesn't run on 64-bit windows 2008 server r2

Does anyone know a way to run OBDC driver on windows 2008 server r2?, a way to run the app?

Pl post in the Heterogeneous Connectivity forum (Heterogeneous Connectivity as this forum is meant for issues related to database installs
HTH
Srini

Can't seem to find oracle native 32-bit cleint for a 64-bit Windows 2008 op

Hi,
We have a Windows 2008 server (64-bit) and have installed oracle 64-bit client on there.
Have a third party application which is usggesting need also a 32-bit oracle native client.
Had a look on otn but can't seem to find. For 64-bit o/s can only see 64-bit oracle client.
Any ideas/links much appreciated.
Thanks

Hi,
It seems there is a 32 bit client and a 64 bit client.
We have a 64 bit operating system. (MS Windows 2008 SERVER).
Is it correct theses are the only2 versions of the client a 32bit client and a 64 bit client and the operating system is irrelevant.
i.e. no 32 bit client for 32 bit operating system operating and 32 bit client for 64 bit operating system?
Thanks

Which Oracle client to use? with CRS2008 on Windows 2008 R2 64bit

Hi,
We are setting up a standalone Crystal Reports 2008 Server on Windows 2008 R2 64bit. This server will serve some reports that will pull data from an Oracle 11g DB. Several Oracle 10g/11g, (32bit or 64bit) DB client has been tried, but CRS cannot connect to the oracle DB using any of them. Which oracle client is known to be working well on this setup?
CRS 2008 <> Windows 2008 R2 64 bit <> Xeon E5600 series machine
Thanks,
Steve

Hello,
CRS2008 v1 supports Oracle 9.2, 10g R1, 10G R2 and 11g R1.
The client to use on those version are the same as the server meaning if you have a 11g R1 server then you can use an Oracle Net Client 11G R1. But you can use also a JDBC, ODBC, OLEDB Oracle 11G R1.
If you have a CRS2008 v0, then Oracle 11G is not supported. Only 9.2, 10g R1 and 10G R2.
I hope this will help you
Regards,
Philippe

SAP Installation Error on DB2 V 9.1 FP 9 on Windows 2008 R2

Hi ,
I have struck in middle of the NW 7.0 EHp1 SR1 (EP 7.01) installation with the following error at step 9: Create Database ports.
Technical details are : Windows 2008 R2, IBM DB2 V 9.1 FP 9.
I Could not find any clues to fix this error. I Would appriicate for any help in fixing this.
ERROR 2011-02-11 17:36:49.634 [iaxxejsbas.cpp:204]
FJS-00003 TypeError: fmgt.getNode(source_db2jcc) has no properties (in
script NW_Onehost|ind|ind|ind|ind, line 36023: ???)
ERROR 2011-02-11 17:36:51.178 [sixxcstepexecute.cpp:950]
FCO-00011 The step CopyJDBCDriver with step key
|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_Create_Db2cli_Ini|ind|ind|ind|ind|3|0|CopyJDBCDriver was executed with status ERROR ( Last error reported by
the step :TypeError: fmgt.getNode(source_db2jcc) has no properties (in
script NW_Onehost|ind|ind|ind|ind, line 36023: ???))
Thanks & Regards,
vinod Tammama

> As suggested by you we have downloaded the latest IBM DB2 V 9.7 FP3 from market place and completed the installation successfully. Now I am trying to perform post installation activities but I am facing few issues with Browser IE 8.0 on Windows 2008 Server R2.
> I wonder if there any compatibility issues with IE 8 on Windows 2008 Sever R2 as I could not able to see any tabs once i login into portal. Even I could not able to login NWA also but the same is working fine in other browsers. Please suggest if i need to change IE settings to view all tabs properly in portal.
To use IE 8 you have to update to a certain patchlevel. This is listed in the PAM on
https://service.sap.com/~sapidb/011000358700001225132009E
on patch 16. You'll see there, that you will need to update to SP 6 on Windows 7 (and hence also on Windows 2008 R2).
Please check with
Note 789220 - Support Package levels for Netweaver installations/upgrades
which SP level your installation has and update accordingly.
> Other browser Firefox 4.0 I am able to login into Portal but when access user management and other tabs it says your browser doesn't support WebDynpro Applications.. Please suggest.
Firefox 4.x is a beta browser, it's not yet released and therefore not supported.
For new installation it's always best to first install the latest patchlevels before you start configuring the system.
Markus

Configure OEM on Oracle Failsafe 3.4.2 (11g R2) on windows 2008

Hi Friends,
Please let me know how to configure Oracle Enterprise Manager(OEM) On Oracle Failsafe 3.4.2 (11g R2 Database) on windows 2008.
I found a Metalink Note : 396659.1 but i am unable to open the Note.
Please provide the Proper Note.
Regards,
DB

I have the same problem.
My solution is:
1.add OFS group name mapping VIP in DNS
2.add VIP in MSCS manager
3.delete VIP in OFS manager
4.add VIP in OFS manager

Oracle EBS Cloning - RAC to Non-RAC on windows 2008

Kindly note that my Client is currently running Oracle E-Business Suit R12.1.1 + 11.2.0.2 on Windows
Server 2008R2 on RAC + ASM.
I have been requested to perform the Clonning of the Production to Test Enviroment from RAC to non
RAC?
I have gone through the note id Certified RAC Scenarios for E-Business Suite Cloning [ID 783188.1] which
says that Oracle E-Business Suit R12.1.1 is not supported for RAC to RAC or RAC to non RAC Clonning?
Please advise whether the Clonning is possible from RAC to non RAC enviroment on Windows 2008 R2 for
R12.1.1 + 11.2.0.2?
What is the possible risk if I go ahead with the same Oracle non supported Enviroment ?

R12 clone with RMAN auxiliary db.

Can Oracle 11g R2 RAC and database sit on Windows 2008 R2?

Thanks.

2008 32 bit it is certified...
2008 64 not certified yet.
the certification matrix within MOS does not indicate 2008 R2 so you might be good for 32 bit.
NOTE: just double checked the matrix and it is certified for windows 2008 R2 x64
Product      Oracle Server - Enterprise Edition
Product Release      11gR2 RAC
Product Version      11gR2 RAC
Tier      Server
Tier Product      N/A
Tier Product Version      N/A
Platform      Microsoft Windows x64 (64-bit)
Platform Version      2008 R2
Certification Status      Certified
Expand All | Collapse All
Expand to view Notes Notes
Expand to view Certification Notes Certification Notes
Edited by: rui_catcuddler on Jul 22, 2010 10:02 AM

Oracle companion cd setup for win 64 bit server 2008

hi everyone,
i have downloaded setup from http://download-llnw.oracle.com/otn/nt/oracle10g/xe/10201/OracleXEUniv.exe
I have installed Oracle XE on a 64-bit Microsoft Windows Server 2008 successfully.
Now i need to install Oracle Database 10g Companion CD setup for oracle http apache and oracle apex 3.1.
i have apex setup and setup link http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html => 10201_companion_win32.zip
this is for 32 bit os. but i need for 64-bit OS win server 2008.
please anyone help me where to download the setup Oracle Database 10g Companion CD setup for 64-bit Microsoft Windows Server 2008 to install oracle http server.
many thanks.
Loga
Edited by: Logaa on Aug 24, 2009 3:14 AM
Edited by: Logaa on Aug 24, 2009 10:04 PM

hi all
i have right clicked the setup exe and set version compatability win server 2003 . now the installation success.
thanks for the forum friends who have spent time to check this question.
i am closing this question.
thanks
Logaa

HOW TO configure oracle bi discoverer 11.1.3 32 bit window to oracle ebs 11

Hi all ,
How can we configure oracle bi discoverer 11.1.3(desktop and admin) installed on windows 32 bit with oracle ebs 11i with database 10g
installed on sun solaris sparc machine.
Kindly send any link which can give me step by step link for this specific scenario.
Thans

Hi Sirini,
I create workbook through Discoverer desktop and save in database, Now I like to give assign these workbooks
to the user through Discoverer view , so that they can view these worksheets, How can I view these workbooks
through Discoverer view in oracle ebs 11i.
Thanks

Installation of Oracle 10.2.0.3 on 32 bit windows 2008

Similar Messages

Maybe you are looking for