Installation of Oracle 10g in Solaris 10 zones

Hi Everybody,
Is there any Documentation for Installation of Oracle 10g in Solaris 10 Zones.
I am having multiple zones shared by one common SAN Storage.
I want to install oracle 10g in one of the particular local zone.
Regards,
Prosenjit Mukherjee.

Last time I looked at metalink the documentation said zones and containers were not supported. That may no longer be true so you should check there first.

Similar Messages

How to install Oracle 10g on Solaris 10 non-global zone.

Hi,
I want to install Oracle 10g on Solaris non global zone with ASM.
I need complete doc for doing the same.
REgards
S.Ali

Check Oracle® Database Installation Guide 10g Release 2 (10.2) for Solaris Operating System.

Installation of oracle 10g rac on open solaris for X86 Machine

Hi
Can you please let me know the advantages of installation of oracle 10g rac on open solaris on x86 machine.And also let me know the detail steps involved in instatllation of oracle 10g rac on open solaris on x86. please suggest the recommdendation for the installation
Thanks
Saiprasath

If by "advantages of installation of oracle 10g rac on open solaris on x86 machine" you mean advantages over RAC on Linux or AIX or HP/UX there aren't any.
If you want to know the advantages of RAC over stand-alone they generally relate to:
1. Eliminating the server as a single point of failure
2. Transparent fail-over
2. Incremental horizontal scalability

Installation of oracle 10g and AS 10G r2 in sun solaris 9.0

hai,
can any send me the documents regarding installation of
oracle 10g and AS 10G r2 in sun solaris 9.0.
regards
ashik

You know you can find the documentation for most products via urls here on OTN, right?
Docu index:
http://www.oracle.com/technology/documentation/index.html
AS 10.1.2:
http://download.oracle.com/docs/cd/B14099_19/getstart.htm

Error while installing Oracle 10g on Solaris 10.

Hi all,
I am trying to install Oracle 10g on Solaris 10 (x86). I did every thing that is given in the Installation manual
created user,group and directories. set all the env variables.
executing the runinstaller it throws error
error in writing to directory /tmp/OraInstall2009-04-06_07-14-09PM.please ensure that this directory is writable and has atleast 69MB of disk space.Installation Cannot continue.+
*:Error 0*
I have given recursive a+rwx permission to /tmp folder and /tmp has 3.2 GB free space. am i missing some thing??
I am very new to Solaris and Oracle;Please help me with this.
Thanks.
Regards
Akhilesh Bhale

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Error in Insallation of Oracle 10g in Solaris 5.9

Hi,
I am Installing oracle 10g in solaris OS.After completed the pre installation steps.I run the ./runInstaller command.But its showing error like this
bash-2.05# ./runInstaller
/export/home3/oracle10/install/.oui: syntax error at line 1: `(' unexpected
I open the Script file also ...
bash-2.05# cat runInstaller
#!/usr/bin/sh
# The environment variable $SRCHOME cannot be set during the installation
unset SRCHOME
AWK=/bin/awk
BUNDLE=db
OCR_LOC=/var/opt/oracle/ocr.loc
LOCALONLY=local_only
LOCAL=TRUE
CMDDIR=`dirname $0`
if [ "$CMDDIR" = "." ]; then
CMDDIR=`pwd`;
fi
# Replace relative path with fully qualified path.
if [ ! "`echo $CMDDIR|grep '^/'`" ]; then
CMDDIR=`pwd`/$CMDDIR;
fi
if [ x${PATH} != x ]; then
PATH=$CMDDIR/install:/usr/bin:/usr/ccs/bin:$PATH
export PATH
else
PATH=$CMDDIR/install:/usr/bin:/usr/ccs/bin
export PATH
fi
if [ x${LD_LIBRARY_PATH} != x ]; then
LD_LIBRARY_PATH=/usr/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
else
LD_LIBRARY_PATH=/usr/lib
export LD_LIBRARY_PATH
fi
# Determine whether there is an existing CRS or not.
# Local is value of local_only in ocr.loc.
# False means there is an existing CRS installation on the system.
if [ -r $OCR_LOC ]; then
LOCAL=`$AWK -F= /$LOCALONLY/'{print $2}' $OCR_LOC`
fi
case "$BUNDLE" in
db)
# One-click: only if there is no cmd line argument and it's not on CRS node
if [ $# -gt 0 -o "$LOCAL" = "FALSE" -o \
! -r $CMDDIR/install/oneclick.properties ]; then
$CMDDIR/install/.oui $*
else
$CMDDIR/install/.oui -oneclick
fi
crs)
$CMDDIR/install/.oui $* -formCluster
$CMDDIR/install/.oui $*
esac
Please tell me the solution asap.

bash-2.05# ./runInstallerDon't install as root user.
Did you install all important packages (listed in installation prerequisities)?

[Beginner Oracle 10g on Solaris 10]Script Root.sh asking road

Hello,
Need help please, Iam near the end of my installation Oracle 10g on Solaris 10, Oracle installer ask me to execute Root.sh, he ask me a path, suggesting me this road /usr/local/bin
The message is Enter the full pathname of the local bin directory : usr/local/bin/ ?
my path is
$PATH=/usr/bin:/usr/dt/bin:/usr/openwin/bin/:usr/ucb
$ORACLE_HOME=/export/home/oracle/oraInventory.
This message follow after I executed orainstRoot.sh successfully.
Thx for any help.
Edited by: user583169 on Feb 24, 2009 1:41 PM

This script asks for path where oraenv, coraenv and dbhome scripts should be copied/created.
Default (suggested) path (full path to directory) is /usr/local/bin directory but you can specify your own directory.
So you have at least two options:
1. Use default location and put /usr/local/bin to your $PATH environment variable
2. You can specify your own path which exists (is set) in $PATH variable (for example /usr/bin)

Doubts intalling Oracle 10G in Solaris 10.

Hi Buddies;
I'm installing Oracle 10g, in Solaris 10, first I uncompressed this file 10gr2_db_sol.cpio. Now, when I execute runInstaller I got this message:
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10 Passed
Checking Temp space: must be greater than 250 MB. Actual 13289 MB Passed
Checking swap space: must be greater than 500 MB. Actual 13492 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Ch eck if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
What I supposed to do? Thanks for your help.
Al

Hi,
look at:
Re: Problem in adding database
maybe it helps. It that thread I showed how I usually manage X11 window. Another way is to do everything silent with scripts as shown here:
http://www.oratoolkit.ch/knowledge/howto/installation/eeSrv-10g-R2-on-Solaris-10-sparc.php
That's my open source swiss army knife.
Cheers,
David
OCP 9i / 10g / 11g

Oracle 10g on solaris 10 : kernel parameter warning

I am installing oracle 10g on Solaris 10.
I have a warning on kernel parameter missing (shminfo_shmmax for example) during the system check.
I understood that with the 10 version of solaris these parameters are replaced by ressources control and I have checked them. They are correctly setted.
Need I do something before continue the install to release the warning or can I bypass this issue and continue the install as I have no warning ?
Thanks for your answers.
Sorry for my english.

You are right. Since Solaris 10 kernel parameters settings in /etc/system is obsolete and some parameters are deprecated.
The steps how to configure required parameters you can find in my paper (step #1.): http://ivan.kartik.sk/oracle/install_ora10gR2_solaris.html
I bypass this issue and continue the install as I have no warning You can safely bypass this issue during installation process but you should set these parameters after installation.

Silent Installation of Oracle 10g on Windows XP

Hi,
I was trying out "SILENT INSTALLATION OF ORACLE 10g ON WINDOWS XP", where I was getting the following error. Can you please help me out.
COMMAND GIVEN : D:\database>d:/disk1/setup.exe -responsefile d:/disk1/response/custom.rsp -silent -nowelcome
ERROR THROWN : Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\RAVIKA~1\LOCALS~1\Temp\OraInstall2011-04-06_07-54-37AM. Please wait ... Oracle Universal Installer, Version 10.2.0.3.0 Production
Copyright (C) 1999, 2006, Oracle. All rights reserved.
You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2011-04-06_07-54-37AM.log
.................................................................................................... 100% Done.
SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
DEP_MODE(InstallType),
TLDepModes(TopLevelInstallType)
Silent install cannot continue.
Please press Enter to exit...
So I changed the "CUSTOM.RSP" response file parameters by adding
DEP_MODE="EE"
TLDepModes="EE"
But it is still throwing me the error.
REquesting you to help me out in this case.
Thanks and REgards
Ravikanth Garimella

Pl identify exact versions of "10g" and "Windows XP". Pl also post the last 100 lines from the install log.
Pl note that Home versions of Windows are not supported - http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#CHDHGGFE
Pl see the Install Guide on how to use response files -
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/advance.htm#i634763
http://download.oracle.com/docs/cd/B19306_01/em.102/b16227/c_oui_appendix.htm#BABGHAIA
HTH
Srini

Complexities of Migrating Oracle 10g from Solaris to HP-UX Itanium

Can anyone share their experiences with regards to migrating Oracle 10g from Solaris on a Sun platform to HP-UX 11i v3 (Itanium) on HP Integrity servers. We are trying to consider all the risks associated with such a move. How much time delay did you experience in resolving unexpected issues along the way? How complex is the process? If you had to do it all over again, would you?
In addtion, we will also be migrating Oracle eBusiness Suite 11i (11.5.10.2).
We appreciate your helpful feedback.
Thank you.

Here is more information:
- the database size is currently about 500GB
- our ASP allows us to be down as much as we want however the company's own needs can only allow a downtime window of two days (over the weekend)
- i presume further that RMAN might be an option to use to backup the database and instance to some transportable media
- it would take about four days to get that media from the ASP to our facility so durign that time the instance at the ASP would have to be used
- after we get the backup media and load everything into our in-house site, our last step would be to find a way to migrate all changes over the WAN. I am told that unless the platforms are the same on both ends, mirroring will be extremely difficult or impossible. If we have a platform that is different from the ASP platform, then the migration of all changes will require conversion and other mechanisms. I am told that HP-UX has so much complexities that this will be a daunting task to accomplish.
Do you have any opinions and recommnedations?

LRM -00109:could not open parameter file Oracle 10g in Solaris 10

Hallo! I have just installed Oracle 10g in Solaris 10.When I logged into sqlplus / as sysdba if found that I was connected to an idle instance. When I tried to startup open the db, the following error appeared
Connected to an idle instance.
SQL> startup open;
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/export/home/oracle/product/10.2.0/db_1/dbs/initsolaris.ora'
My pfile has the name init.ora and not initsolaris.ora.How can I change the settings to make the Oracle database start via pfile init.ora.
Eventually,I would like the db to read the spfile spfileorcl.ora during the startup.How can I achieve this?
Thanks

4joey1 wrote:
Hallo! I have just installed Oracle 10g in Solaris 10.When I logged into sqlplus / as sysdba if found that I was connected to an idle instance. When I tried to startup open the db, the following error appeared
Connected to an idle instance.
SQL> startup open;
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/export/home/oracle/product/10.2.0/db_1/dbs/initsolaris.ora'
My pfile has the name init.ora and not initsolaris.ora.How can I change the settings to make the Oracle database start via pfile init.ora.
By default, oracle will look first for a spfile named "spfile<ORACLE_SID>.ora". Lacking that, it will try to find "init<ORACLE_SID>).ora.
Eventually,I would like the db to read the spfile spfileorcl.ora during the startup.How can I achieve this?
Once you have started the db (I believe a startup nomount will be sufficient) you can issue CREATE SPFILE ... Details are in the fine SQL Reference manual found at tahiti.oracle.com
BTW, "open" is the default behavior of "startup", so no need to specify it. A simple "startup" does the same thing.
Thanks

Question on migrating oracle 10g from solaries to linux?

Can some one tell the exactly what is the advantage of migrating oracle 10g from solaries to linux?
Thank you,
hb

call me
[email protected]

I have completed installation of Oracle 10g but I could not login into the

Please I have completed installation of Oracle 10g into my laptop but I could not login into the database to create my new tables through SQL*Plus.
I don't know what to type into these text fields. (1) Name, (2)Password and (3) Host.
Please can someone help me urgently
Fola

There are different things here to know about.
Did you also create database while installation ?
If yes then
C:\> set oracle_sid=yoursid
C:\> sqlplus username/password
If not then, please create the database first.
For "I don't know what to type into these text fields. (1) Name, (2)Password and (3) Host."
(1) Name : This is user name.
(2) Password: This is password.
(3) Host: This is oracle net service name configured in tnsnames.ora. Please refer to http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14212/toc.htm
-aijaz

MakefileException during the installation of Oracle 10g

Hi,
During the installation of oracle 10g i get the following error:
INFO: /
INFO: usr
INFO: /bin/ld: crt1.o: No such file: No such file or directory
collect2:
INFO: ld returned 1 exit status
INFO: make: ** [ctxhx] Error 1*
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
What should i do to solve this exception?
Thanks.

Hi,
which distribution you are using ?.
check if /bin/ld exist.
On my ubuntu I need to create severel soft links like /bin/rpm.... /bin/awk....
Find program
find /usr/bin/ -name id
Create softlink
ln -s /usr/bin/id /bin/id
hope that can help.
greetings Till
Edited by: user11146329 on 09.06.2009 12:04

Installation of Oracle 10g in Solaris 10 zones

Similar Messages

Maybe you are looking for