Installation of oracle 10g rac on open solaris for X86 Machine

Hi
Can you please let me know the advantages of installation of oracle 10g rac on open solaris on x86 machine.And also let me know the detail steps involved in instatllation of oracle 10g rac on open solaris on x86. please suggest the recommdendation for the installation
Thanks
Saiprasath

If by "advantages of installation of oracle 10g rac on open solaris on x86 machine" you mean advantages over RAC on Linux or AIX or HP/UX there aren't any.
If you want to know the advantages of RAC over stand-alone they generally relate to:
1. Eliminating the server as a single point of failure
2. Transparent fail-over
2. Incremental horizontal scalability

Similar Messages

DO I need SFRAC for Oracle 10g RAC on Sun Solaris

My platform is SUN Solaris 10 64 bit on v490 server. On the backend side, we are using EMC CX500 storage. We will use Veritas File system and Veritas CFS.
I would like to ask, Do I must need SFRAC to configure Oracle 10g RAC or Can I just use only Oracle CRS. I do not want to use ASM.
Please advise
Thanks,
Sam..

The VCFS usually requires a Veritas Cluster, thus you would have to use the product combination that is bundled as SFRAC as mentioned before. Metalink in addition says:
10 10gR2 64-bit Veritas Storage Foundation for Oracle RAC 5.0 Certified
There is one exception to this rule: Linux.
Veritas and Oracle support a standalone version of the Veritas Cluster Files System (and only this component) on Linux. This does not hold true for Solaris.
Concluding, if you want to use the VCFS you would need to get a VCS, which then basically means using SFRAC.
However, in this case, as mentioned before, you would not need ASM.

Installation of oracle 10g RAC.

I need to write a document describing how to install oracle 10g on Oracle Linux 5 update 7 and x86_64 processors, this document will be an internal reference in my company, I would like a starting point, anyone know a website, blog or other place where I can find this document to use to write my own.
Italo.

Paul I also thought this way but I will not have the time I need to write this documentation without a reference, for example, asked for help in a metalink on the list of packages that have to use, the answer was that I would have to install all the packages, this is impractical.
I know that something in this process I will have to customize it to be but did not want the whole process. And I agree with you, if I did it alone would have a profound knowledge on this subject.

Document on 10g RAC setup on solaris using vmware

Hi All,
I am planning to setup "Oracle 10g RAC setup on Solaris using vmware", but I am strucked up at installation of Soaris 10 in VMWare.
Can any body please help/provide me the document on Solaris 10 installation for RAC setup .
The main problems I am having during the SOlaris 10 setup is
1) Setting up the static public and private addresses required for RAC
2) Partitioning the disk space.
Thanks in advance,
Mahipal Reddy

Refer these,
http://www.scribd.com/doc/15650880/Install-Rac-on-Solaris-Vmware
http://www.disperu.com/using-vmware-server-install-10g-rac-on-solaris/
http://nayyares.blogspot.com/2008/11/step-by-step-rac-10g-r2-solaris-10.html
Thanks
Edited by: Cj on Dec 13, 2010 2:38 AM

Solaris 10 and Hitachi LUN mapping with Oracle 10g RAC and ASM?

Hi all,
I am working on an Oracle 10g RAC and ASM installation with Sun E6900 servers attached to a Hitachi SAN for shared storage with Sun Solaris 10 as the server OS. We are using Oracle 10g Release 2 (10.2.0.3) RAC clusterware
for the clustering software and raw devices for shared storage and Veritas VxFs 4.1 filesystem.
My question is this:
How do I map the raw devices and LUNs on the Hitachi SAN to Solaris 10 OS and Oracle 10g RAC ASM?
I am aware that with an Oracle 10g RAC and ASM instance, one needs to configure the ASM instance initialization parameter file to set the asm_diskstring setting to recognize the LUNs that are presented to the host.
I know that Sun Solaris 10 uses /dev/rdsk/CwTxDySz naming convention at the OS level for disks. However, how would I map this to Oracle 10g ASM settings?
I cannot find this critical piece of information ANYWHERE!!!!
Thanks for your help!

You don't seem to state categorically that you are using Solaris Cluster, so I'll assume it since this is mainly a forum about Solaris Cluster (and IMHO, Solaris Cluster with Clusterware is better than Clusterware on its own).
Clusterware has to see the same device names from all cluster nodes. This is why Solaris Cluster (SC) is a positive benefit over Clusterware because SC provides an automatically managed, consistent name space. Clusterware on its own forces you to manage either the symbolic links (or worse mknods) to create a consistent namespace!
So, given the SC consistent namespace you simple add the raw devices into the ASM configuration, i.e. /dev/did/rdsk/dXsY. If you are using Solaris Volume Manager, you would use /dev/md/<setname>/rdsk/dXXX and if you were using CVM/VxVM you would use /dev/vx/rdsk/<dg_name>/<dev_name>.
Of course, if you genuinely are using Clusterware on its own, then you have somewhat of a management issue! ... time to think about installing SC?
Tim
---

Oracle 10g RAC installation on HP-UX 11.31 for SAP ERP 6.04

Dear experts,
We are trying to install SAP ERP 6.0 EHP4 with Oracle 10g RAC on HP-UX 11.31. Please note that, We are using VERITAS cluster filesystem (CFS) for this purpose and not HP-UX ServiceGuard ClusterFileSystem.
*As per SAP procedure, we have installaed plain plain SAP system with single instance Oracle (ref: Configuration of SAP NetWeaver for Oracle Database 10gRAC guide). Now we are first trying to install Oracle Clusterware (CRS) and then we will install Oracle RAC software. Is this procedure right?*
Which file (and its path) we have to use for CRS installation and its patch? Is it runInstaller under /oracle/stage/102_64/clusterware? With this file we can install CRS 10.2.0.1. Similarly for Oracle RAC, which files we are supposed to use, i.e for installation and patch upgrade?
Also can we use clusterware package available from Oracle directly in the SAP environment?
We tried to install CRS with runInstaller while running Configuration Assistant after root.sh script.
The following commands are failing in Configuration Assistant:
/oracle/CRS/102_64/bin/racgons add_config erpprdd1:4948 erpprdd2:4948
/oracle/CRS/102_64/bin/oifcfg setif -global lan1/20.20.20.0:cluster_interconnect lan0/192.168.3.0:public
/oracle/CRS/102_64/bin/cluvfy stage -post crsinst -n erpprdd1,erpprdd2
1st command does not give any output if run manually.
2nd commands o/p: PRIF-12: failed to initialize cluster support services
3rd commands fails in every check
Please suggest the solution and expecting answers to the above mentioned questions.
Thanks & Regards,
Tejas

>
Charles Yu wrote:
> Q1: Oracle RAC with 9.2.x on HP-UX?
> A: For HA environment, cluster software is: MC/SG on HP-UX 11.31; there are optional components of MC/SG for supporting Oracle RAC and SAP application. I was confused that I could not find the installation guide regarding 4.6C on MC/SG HA environment of HP-UX.
> Charles
Relevant docs for Service Guard (SG) cluster are available at http://docs.hp.com. Hope you have checked for the suport of oracle 92x on HP-UX 11.31
>
Charles Yu wrote:
> Q2: Any reason why you don't use a supported database version?
> A: Actually, in order to avoiding the the risk of database upgrade and minimizing the migration risk, top level has decided that keeping the same Oracle version. Indeed, we don't plan the migration of application. On the other hand, it is complicated to do the assessment for application migration.
> Charles
You can go for combined os migration and db release upgrade also at a stretch with the same downtime.

Oracle 10g rac installation on IBM power server

Dear Gurus,
I am installing Oracle 10g RAC on IBM power server but while running CRS getting the following errors. Please help to resolve this issue.
OUTPUT from Installation log:
INFO: Start output from spawned process:
INFO: INFO:
INFO: /oracle/app/oracle/product/crs/bin/genclntsh
INFO: /usr/bin/ld: cannot find -lxl
INFO: collect2: ld returned 1 exit status
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: make:
INFO: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/oracle/app/oracle/product/crs/network/lib/ins_net_client.mk'. See '/oracle/app/oracle/oraInventory/logs/installActions2011-12-26_04-40-48PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
SYSTEM:
IBM power server
Linux 5.3
I have already tried changing ORACLE_HOME,CRS_HOME,LD_LIBRARY_PATH but nothing worked.
Regards,
Prajash

Those errors remind me on errors I encountered when I was trying to do installation that was not certified,
so try to check if installation you are doing is actually supported.
In the meantime , visit metalink and read document [ID 460969.1] , */usr/bin/ld: Cannot Find -lxml10, Genclntsh: Failed To Link Libclntsh.so.10.1*

Installation of Oracle 10g in Solaris 10 zones

Hi Everybody,
Is there any Documentation for Installation of Oracle 10g in Solaris 10 Zones.
I am having multiple zones shared by one common SAN Storage.
I want to install oracle 10g in one of the particular local zone.
Regards,
Prosenjit Mukherjee.

Last time I looked at metalink the documentation said zones and containers were not supported. That may no longer be true so you should check there first.

Oracle 10g RAC to 11g RAC Upgrade on Solaris

Hi,
We are planning to do a migration of a 4 Node Oracle 10g RAC on Solaris 9 to 11g with Solaris 10. We'd like know what would be the best path to take. We cannot afford any downtime!
Options: Are these feasible? Which option is best? Any documents links?
a) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?
c) Use Dataguard with 2 different RAC environments (2 nodes each). How would this work? Is it the only possible way? Any steps please?
Thanks

a) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?Hi,
first of all i would not change several components (OS, database version) at a time. My recommendation is to make small steps and start with the operating system first. Seconds recommendation is to test and test everything in your dev or test environment prior doing the upgrades in the productive environment. Trust me: You will face problems :-) So you better try it beforehand!
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?As far i know you can run different operating system versions on different nodes if they are supported (Solaris 9 and 10 are).
Ronny Egner
My blog: http://ronnyegner.wordpress.com

Problem with Oracle 10g RAC VIP network setting at Solaris 9

Dear All,
I have tried to set up a Oracle 10g RAC Release 2.
With OS solaris 9, and 2 nodes.
The nodes setting as the following:
nodes 1:
Public address: 172.16.0.121
Private address: 192.168.0.121, 192.168.1.121 (dual path for heart beat)
nodes 2:
Public address: 172.16.0.122
Private address: 192.168.0.122, 192.168.1.122
And i have assigned two IP adress 172.16.0.131, 172.16.0.132 as the VIP address for the
RAC.
And the following is the /etc/hosts file:
root@shk01 # cat /etc/hosts
# Internet host table
127.0.0.1 localhost
# public address
172.16.0.121 shk01 loghost
172.16.0.122 shk02
# heart beat
192.168.0.121 shk01-priv1
192.168.1.121 shk01-priv2
192.168.0.122 shk02-priv1
192.168.1.122 shk02-priv2
# VIP address
172.16.1.131 vip-shk01
172.16.1.132 vip-shk02
But when i run the command "$ ./runcluvfy.sh comp nodecon -n shk01,shk02 -verbose"
it shows the error:
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
I did try to add the VIP address on bge0:1, as i using bge0 for the public address.
Both nodes i did using the same interface name for it.
Anyone have idea for me to check out the error?
Also, I have other question about the raw device.
As there is option for setting for ASM or raw device. If choosing raw device, does it mean that it just need to
format the storage disk but without newfs it? And then the Oracle program will able to handle it?
Thanks,
Xentar

You don't seem to state categorically that you are using Solaris Cluster, so I'll assume it since this is mainly a forum about Solaris Cluster (and IMHO, Solaris Cluster with Clusterware is better than Clusterware on its own).
Clusterware has to see the same device names from all cluster nodes. This is why Solaris Cluster (SC) is a positive benefit over Clusterware because SC provides an automatically managed, consistent name space. Clusterware on its own forces you to manage either the symbolic links (or worse mknods) to create a consistent namespace!
So, given the SC consistent namespace you simple add the raw devices into the ASM configuration, i.e. /dev/did/rdsk/dXsY. If you are using Solaris Volume Manager, you would use /dev/md/<setname>/rdsk/dXXX and if you were using CVM/VxVM you would use /dev/vx/rdsk/<dg_name>/<dev_name>.
Of course, if you genuinely are using Clusterware on its own, then you have somewhat of a management issue! ... time to think about installing SC?
Tim
---

Installation of oracle 10g and AS 10G r2 in sun solaris 9.0

hai,
can any send me the documents regarding installation of
oracle 10g and AS 10G r2 in sun solaris 9.0.
regards
ashik

You know you can find the documentation for most products via urls here on OTN, right?
Docu index:
http://www.oracle.com/technology/documentation/index.html
AS 10.1.2:
http://download.oracle.com/docs/cd/B14099_19/getstart.htm

Oracle 10g RAC installation on linux server.

HI,
Can anybody help me that to give some answers of my question's ?
can i install oracle 10g RAC on a single hdd linux server which is installed on an ordinary intel processor based machine.
if i can then plz tell me this how can i do this.
i am new in linux server just wanted to learn that how to install oracle 10g RAC.
thanks & Regards to all of my seniors..

The only option you have to install RAC on 1 machine is to use Oracle VM, VMWare or Linux Virtualization feature (Linux Xen).

Installation problem of Oracle 8.1.7 on solaris 10 x86

Hi,
I tried to install the Oracle 8.1.7 on solaris 10 x86 and I got an error message shows: "cannot write to /opt/oracle/product/8.1.7/jar/classes2.jar".checking the log it shows:
Exception: IOException2
and exception: copyGroupFromJar. I ignored the error but the installation failed.By the way, I was not asked to run root.sh during the installation. Can anyone kindly tell me how to make it?
yours
zeushd

Here are some additional statements for 10g on Solaris 10g x86:
1. Execute runInstaller with the -ignoreSysPrereqs option.
2. Select 'Do not create a starter database' when installing Oracle 10g.
3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.

Oracle 10g RAC

Hi All,
I am a research student currently struggling to install Oracle 10g RAC on Windows OS.What i understand about a Oracle RAC database system is that it involves a configuration of multiple hosts or servers joined together with a clustering software and accessing the shared disk structures.What i also understand is that i need a CRS provided by Oracle for a Windows or Linux based RAC installation.
What i don't understand is for a Two node RAC system do i need a Third machine which has the shared storage device.If yes do i have to install a copy of Oracle 10g Enterprise Edition and CRS on the shared storage device moreover do i need to install a copy of Oracle 10g Enterprise edition on each of the nodes or just the clusterware is enough.

Hi Salil
No, you do not need a third machine. You can even setup RAC as a single node on one machine! What you do need is to have some sort of cluster aware file system. Try looking at OCFS on Windows in your case.
If you are interested in a Linux example please have a look at the examples at http://ocpdba.net/oracle9i_rac/cheaprac.html and http://ocpdba.net/oracle10g_rac for an OCFS implementation I am working on.
regards,
Ahbaid

Oracle 10g RAC on Windows

Installed Oracle 10g RAC on Windows... Everything was
working fine, now when I install CRS it completed at 100% and then in the configuration it gives error
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I am using VMware WorkStation 5
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
I can see my disks from both machines. Open the "Computer Management" dialog (Start > All Programs > Administrative Tools > Computer Management
I use Windows XP SP2 as the host operating system
Any suggestion?
Message was edited by:
MEXMAN

You know its not certified?
My first thought when I read the subject of this thread, and before reading what you posted, is that you've either done no research on RAC or didn't understand what you've read.
You can create a RAC cluster using any operating system certified by Oracle.
But the operating system is the least important part of creating a cluster. The questions you need to be able to address are:
1. What is your solution to created shared storage?
2. What is your solution to create the cache fusion interconnect and VIPs?
If you don't have an answer to these questions you can not build a RAC cluster.

Installation of oracle 10g rac on open solaris for X86 Machine

Similar Messages

Maybe you are looking for