Installation of Oracle Application Server on Peer to Peer Network

I have a network of three machines. One of the machine runs Redhat Linux AS 4 with static IP. I have installed Oracle iAS 10g on one machine. Other two machines are windows machines with static IPs. These are client machines for the AS. All three machines are pinging each other.
When I try to access the iAS from the windows machine, the IE or firefox gives internal server error. All the services on the iAS are up and running.
My question is that is it possible to run oracle iAS without DNS server?
What is the best practice in this regard?
regards

Modify c:\windows\system32\drivers\etc\host as a text file and add the entries for your ips and hostnames, this file is used intead of DNS or when a DNS is not available.
Greetings!

Similar Messages

Installation of Oracle Application Server and Oracle forms 10g

I am currently using form 6i and Oracle 10g in my home. but i want to
Install and setup Forms 10g on my Pentium IV PC with oracle Application server 10g.
I need the issues in this installation and I want Proper steps and Software and hardware Requirement for Implement my oracle forms on web.

You can download the documentation from otn.oracle.com or if u have dvd/cd
then installation guide will be there inside the dvd/cd
Rajesh

Oracle Application server 10.1.2.0.2 Installation error

Please
I am installing OAS on a oracle linux 5
when i get to 86 % of the installation process where it shift to the link page i get an error and to continue i have to ignore several erros
any idea
thank you

I found the solution. I ran the following commands it worked
Any installation of Oracle Application Server 10g Release 2 (10.1.2.0.2) on OEL 5.x or RHEL 5.x in which Reports is getting installed will fail with reports relinking errors unless you apply the required RPM listed below.You may download the RPM package from the following location:
[http://oss.oracle.com/projects/compat-oracle/dist/files/Enterprise_Linux/xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm]
As root, you can install this RPM package by issuing the ollowing command
# rpm -i xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
After the RPM, is installed, you will also need to override the /usr/lib/libXtst.so.6 with the one from /usr/X11R6/lib/libXtst.so.6. As root, issue the commands:
# mv /usr/lib/libXtst.so.6 /usr/lib/libXtst.so.6.ORG
# ln –s /usr/X11R6/lib/libXtst.so.6 /usr/lib/libXtst.so.6
Thanks

[XI 3.1] Deployment problems to Oracle Application Server

Hello everybody.
I'm new on BO products, and i have problems with installation on Oracle Application Server 10.1.3
BuildVersion=12.1.0.882.BOE_Mira_RTM
I have success installed OAS 10.1.3 (with patch 10.1.3.3.0), and when i'm installing BO following documentation, after installation no any BO applications in OAS found. This is first.
Then i attempt install BO applications (CmcApp, AdminTools, etc...) manualy... I have success installation of CmcApp, but when try it to run, i get error ([logon_error_attach|http://www.sendspace.com/file/u8gyoj]), page with logo BO, but logon form (logon.faces) could't be found... i think *.faces on OAS does not work/support, it must be something like *.jsp, *.jspx, but not *.faces, or i must configure OAS in special way.
Any suggestions?
Thanks, Evgeny.
Spasibo)
p.s. With Tomcat which comes with BO all works fine.
from documentation
To use a Java web application server, select Java Web Application
Server and choose one of the following options:
Automatically deploy to a pre-installed Web Application Server.
This will prompt you to enter the configuration and authentication
information on the next screen.
Admin is Secure?: Select this option to use Secure Sockets Layer (SSL) encryption for authentication.
Note:
If Admin is Secure? is not selected, you will still have to specify the username and password to access the server.
u2022 Port: Administration port of the application server (for example u201C6003u201D). This should be the request port of the <notification-server> element in the opmn.xml file.
u2022 Username: User with administration rights to the application server.
u2022 Password: Password for account with administration rights to the application server.
u2022 Server Instance: Name of the Oracle Application Server application server instance (for example u201Chomeu201D).
u2022 Server Name: Name of the target application server (for example, u201Cmyserver.domain.comu201D).
u2022 Group Id: Name of the server group to which the target application belongs (for example "Default_group").
u2022 Application Server Installation Directory: The directory where the web application server is installed
(for example C:\product\10.1.3\OracleAS_1).

Thanks, guys for reply.
To Denis Konovalov: Привет! Есть один срочный вопрос, не мог-ли бы ты мне на него ответить. если есть возможность, напиши, пожалуйста, на evgeny (точка) shekalev (собака) гмэйл.ком (защита стоит - не разрешают общаться ) - p.s. куда приятней общаться на родном) p.p.s. обещаю, сильно мучать не буду ))

Oracle Application server 10g installation

Hi,
I have installed oracle 10g Express edition on my Vista home premium.
It will be a great help, if anybody reply me how to access the oracle application server ..... I am new to this installation.
whether I need to install the s/w or I need to configure?
Please help me out.
Thanks,
geetha.
Edited by: user10587613 on Mar 15, 2009 7:32 PM

OK, you can find the software here:
http://www.oracle.com/technology/software/products/ias/htdocs/101310.html
(Choose CD1 for the your platform from "Oracle SOA Suite 10g" row)
Here is the installation guide for Linux that will walk you through the steps to install:
http://download.oracle.com/docs/cd/B31017_01/linux.1013/install/toc.htm
If you are only looking to install Oracle Application Server and not the SOA Suite or Web Center Suite, you still use the above software but choose "Integrated Web Server and OC4J Middle Tier":
http://download.oracle.com/docs/cd/B31017_01/linux.1013/install/topo.htm#CEGEECFH
Hope this will help.
Thanks
Shail

Oracle Application Server 10g Installation Guide for Windows

The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

Hi,
The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
The Docs are located under the Documentation tab.
Alternatively, here is the direct link to the Documentation Tab interface of the Library:
http://download.oracle.com/docs/cd/B10468_04/docs.htm
Regards,
Les

Oracle Application Server 10g R2 installation on Oracle Enterprise Linux 5

Hi there ...
I want to install Oracle Application Server 10g R2 on Oracle Enterprise Linux 5. Can I get an installation instructions (or steps) for that?
Oracle installation guide mentions Suse 9 & 8 and Red hat 3 & 2. There is nothing related to Oracle Enterprise Linux 5 or 4?
Thanks

Yes there is one for 10gR3 too:
Note:465159.1 Oracle Application Server 10g (10.1.3) Requirements for Linux OEL 5 and RHEL 5
Thanks
Shail

Oracle Application Server 10g R2 32bit installation on RHEL 5.4 64 bit

Hi !
Is it possible to install 32 bit Oracle Application Server 10g R2 on 64 bit RHEL 5.4?
Is there some spacial care I need to take to do this?
Regards,
GC

May be possible but it is probably not tested by Oracle nor is it supported as error correction support for OAS 10g has finished more than a year ago.
A good starting point is My Oracle Support Note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=564174.1]564174.1, "Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5". Make sure that you always use a 32-bit emulated shell (linux32 bash).
Thanks,
EJ

Oracle Application Server 10.1.3.1 installation issue

Hi,
I am trying to install Oracle Applicaiton server on linux and i have installed it on similar boxes before without any issues, however this time around after i am done with the installation, it is not showing me the enterprise console. It gives a successful installation message but with the following message.
Application Server Control Console is not running in this instance of Oracle Application Server. You can manage this instance remotely through another instance of Oracle Application Server that is configured to run Application Server Control Console.
What should I do to get the admin console. I also looking around and saw but emctl utitlity is not there in ORACLE_HOME/bin
Edited by: user9938780 on Dec 11, 2008 11:34 AM

the 10.1.3.1 version does not use emctl
if you do a opmnctl status -app you can see your applications, one of them is ascontrol
you can reach the emconsole through http://hostname:7777/em
to start you can issue opmnctl startproc application=ascontrol
reg
Michel
Edited by: MichelS on Dec 11, 2008 11:53 AM
Edited by: MichelS on Dec 11, 2008 11:54 AM

Oracle Application Server 10.2 installation problem: Error in invoking targ

Hi,
I am installing Oracle Application server 10.2 in IBM AIX 6.1 and I encounter this error during the installation..
Error in invoking target "install" of makefile
I am in the linking part
kindly help me out.
thanks...

This could be if you miss a library or package, did you follow any note to perform the installation?
Have you read the notes in metalink about 6.1?
There is some information about oracle Aplicaitons 12, even is not the same, the packages and filesets used to be the same. try to look for them.
Greetings.

Oracle application server 10g installer

I'am trying to install oracle application server 10g. During the installation it appeared some messages like these ones:
"Error al llamar al destino 'libso_install' del archivo make /u2001/frs/OraHome1/reports/lib/ins_reports.mk".
"Error al llamar al destino 'agent' del archivo make /u2001/frs/OraHome1/sysman/lib/ins_sysman.mk"
"Error al llamar al destino 'webm_install' del archivo make '/u2001/frs/OraHome1/forms90/lib/inst_forms.mk'"
I do not the reason of these error messages?
Are they related whit the fact tha I do not have de SDK 1.4.1 32BIT SR1 installed?
And I do not understand because when the installation begin it shows me the next message "All requirements met.":
Checking requirements...
Checking operating system version: must be 5200
Passed
Checking operating system patches: IY43980:bos.perf.libperfstat:5.2.0.11,IY44810
:bos.mp:5.2.0.12,IY44810:bos.mp64:5.2.0.12,IY44810:bos.up:5.2.0.12,IY45462:bos.a
dt.include:5.2.0.12,IY45707:bos.mp:5.2.0.12,IY45707:bos.mp64:5.2.0.12,IY45707:bo
s.up:5.2.0.12,IY46214:bos.adt.include:5.2.0.13,IY46214:bos.mp:5.2.0.13,IY46214:b
os.mp64:5.2.0.13,IY46214:bos.net.tcp.client:5.2.0.13,IY46214:bos.up:5.2.0.13,IY4
6605:bos.mp64:5.2.0.13,IY51801:bos.rte.aio:5.2.0.14 Passed
Checking operating system packages: bos.adt.base,bos.adt.lib,bos.adt.libm,bos.pe
rf.libperfstat,bos.perf.perfstat,bos.perf.proctools,X11.motif.lib Passed
Checking swap space: must be greater than 1536 MB.
Actual 2048MB Passed
Checking Temp space: must be greater than 400 MB.
Actual 689 MB Passed
All requirements met.
Moreover it finished the disk1 installation and never it ask me the disk2.
If I click on the continue button the installation continues but at the end it doesn't work?
Please, I need help !!!!
Thanks!!

Thanks to answer me Andreas.
You are ok, I can use make from the command line. Looks this:
(orafrs@anag:/u2001/frs/OraHome1/reports/lib)33%make ins_reports.mk
aix.oraclemake: Command not found.
(orafrs@anag:/u2001/frs/OraHome1/reports/lib)34%make -f ins_reports.mk
aix.oraclemake: Command not found.
(orafrs@anag:/u2001/frs/OraHome1/sysman/lib)40%make ins_sysman.mk
aix.oraclemake: Command not found.
(orafrs@anag:/u2001/frs/OraHome1/sysman/lib)41%make -f ins_sysman.mk
aix.oraclemake: Command not found.
I don't know hoy to test the ar command because I need some files to have my library.
How can I know if my compiler is installed? And if I need to install it, how can I know which compiler I need form my Aix 5.2 version?
Thanks for you time!!!!
I wait your answer

Oracle Application Server 10g Portal Installation

For Oracle Application Server 10g Portal do i need to install Oracle Application Server 10g Infrastructure If yes then how in windows because in this website only the discussed about Linux ... So please provide me link if in windows we need to install so i will download Oracle Application Server 10g Infrastructure ...
Thanks In Advance

Yes. Infrastructure provides the database to hold the portal metadata, the database and the app server services to manage single sign-on and security for portal, and the portal app server metadata repository (a different thing than the first)
To install App Server Infrastructure, follow the same steps as for a Linux installation. Just use Windows-style path names as compared to Linux style path names.
Make sure the portal is installed into a different home from the infrastructure.

"Oracle Application Server Configuration Assistant" failed, installation...

I have problem to install SOA suite
Indeed it installs and when it come to complete configuration assistants it shows that one of my components failed.
i tried several times to uninstall/install the SOA suite and it failed in the same stage.
can some one give me some hints?
here is the log file enty:
Trying to check if config_order xml is present
The scratch path is =H:\temp\OraInstall2006-11-23_02-08-30AM
The config_order.xml is null
Lowering thread priority for config tool
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Application Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'F:\dev\oracle\OracleAS_10\jdk\bin\java -cp F:\dev\oracle\OracleAS_10\j2ee\home\applications\ascontrol\ascontrol\WEB-INF\lib\ascontrol.jar;F:\dev\oracle\OracleAS_10\j2ee\home\applications\ascontrol\ascontrol\WEB-INF\lib\log4j-core.jar;F:\dev\oracle\OracleAS_10\jlib\oraclepki.jar;F:\dev\oracle\OracleAS_10\jlib\ojmisc.jar; oracle.sysman.ias.studio.installer.ASControlConfigAssistant -sso true -j2eeinstance home -username oc4jadmin -password *Protected value, not to be logged* -oraclehome F:\dev\oracle\OracleAS_10'
Start output from spawned process:
java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
Exception in thread "main"
End output from spawned process.
Configuration assistant "Oracle Application Server Configuration Assistant" failed
java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
Exception in thread "main"
Result code for launching of configuration assistant is: 1
The OUICA command is launched from F:\dev\oracle\OracleAS_10\oui\bin\ouica.bat.-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to F:\dev\oracle\OracleAS_10
Configuration directory is set to F:\dev\oracle\OracleAS_10\cfgtoollogs. All xml files under the directory will be processed
-----------------------------------------------------------------------------please tell me what is Oracle Application Server Configuration Assistant and what effect it will have on my server.
thanks

Hi all,
I've found a solution to this problem. So far I've been trying the installation through MSTSC by taking administrative control (through /console option). Later, I tried my luck by installing it through Net Meeting which proved to be successful.
Hope you can try the same and ged rid of the installation issues.

Installation of forms reports and oracle application server 10g

Hi,
I have been using client server till now, now planning to move to 10g. Got the developer suite 10g.
Tell me how and where to install forms/reports and Oracle application server... I mean forms reports should be on developer PC then what about application server? should it be on a different dedicated server? or can i have it on database server?
in case, if I install application server on one server and database is on another server then what about forms and reports?
please tell me which is the right option?

cypdon99 wrote:
Hi,
I have been using client server till now, now planning to move to 10g. Got the developer suite 10g.
Tell me how and where to install forms/reports and Oracle application server... I mean forms reports should be on developer PC then what about application server? should it be on a different dedicated server? or can i have it on database server?
in case, if I install application server on one server and database is on another server then what about forms and reports?
please tell me which is the right option?Ideally, you should have two separate server machines.
One for the database server.
One for the Application Server.
The Application Server is basically used for hosting your forms and reports, so you dont have to place the forms and reports on the developer PC or at any other server.
best regards
http://fahdmirza.blogspot.com

Oracle Application Server 10g Standalone Installation

Hello,
Can you please let us know if it is possible to Install Oracle Application Server (10g) Standalone ( without SOA suite 10g).
If there is any documentation/link which can provide this information.
Thanks,
Hussain
PIM Dev Team

Hi,
Following are the version and platform details.
OAS Version - 10.1.3.4
Platform - IBM AIX 6.1
Questions
a) Please provide document/link with the details about how to install Standalone Oracle AS ( without SOA Suite)
b) Are are any restrictions in installing standalone Oracle AS ( in terms of License .. etc).
Appreciate your help.
Thanks
- Hussain

Installation of Oracle Application Server on Peer to Peer Network

Similar Messages

Maybe you are looking for