Installation of Oracle DB 10.2.0.4 on Oracle Linux Enterprise 5.4

Dear all
We are planning to install the Oracle DB 10.2.0.4 on Oracle Linux Enterprise 5.4.
Kindly advise if the the OS is stable or any incompatibility issues we might get during the installation.
Any past experience sharing will be appreciated.
Regards
Kam

Hi Kam,
maybe you should have a look on my recipes on how to deploy your server. For example:
http://www.oratoolkit.ch/knowledge/howto/installation/seSrv-10g-R2-on-OEL-5.4-x86_64.php
http://www.oratoolkit.ch/knowledge/howto/installation/eeSrv-10g-R2-on-OEL-5.4-x86_64.php
http://www.oratoolkit.ch/knowledge/howto/installation/cuSrv-10g-R2-on-OEL-5.4-x86_64.php
http://www.oratoolkit.ch/knowledge/howto/installation/seSrv-10g-R2-on-OEL-5.4-x86.php
http://www.oratoolkit.ch/knowledge/howto/installation/eeSrv-10g-R2-on-OEL-5.4-x86.php
http://www.oratoolkit.ch/knowledge/howto/installation/cuSrv-10g-R2-on-OEL-5.4-x86.php
Good luck!
Cheers,
David
OCP 9i / 10g / 11g
Edited by: David D'Acquisto on 18.02.2010 12:25

Similar Messages

32 Bit Installation or Oracle Linux and Oracle Database 10g

I have an old E-Machine that I wanted to put Oracle Linux and Oracle Database Express 11G on. I was just wanting to do some testing and development on the system. I'm pretty sure the machine is 32bit.
I just burned a copy of 32 bit Oracle Linux onto a CD. Is there a version of Oracle Database Express that will run on it?
It seems like there is only a 64 bit version of Oracle Express Database 11g. Is Oracle Database Express 10g installable on Oracle Linux 32 bit?
Let me know! Thanks in an advance.

One (or two) caveats with the 10g version, XE can not be patched and the 10.2.0.1 XEs were created before the current daylight savings time rules went into effect.
If you have access to My Oracle Support there is a method to get updated timezone files for the oracle binaries, you need at least version 4 of the DST files. I've got the MOS docIDs somewhere let us know if needed and I'll dig 'em up.

Oracle 11g installation on Oracle Linux 5.10

Hi All,
While installing Oracle 11g R2 in Oracle Linux 5.10 I am getting error : No such file or directory
[info@localhost database]$ ls
doc install response rpm runInstaller sshsetup stage welcome.html
[info@localhost database]$ ./runinstaller.sh
bash: ./runinstaller.sh: No such file or directory
[info@localhost database]$
Please suggest.

Hi,
Make sure you extract both part in same directory, Do not separate it. Example for 11.2.0.3,
As oracle user
cd /tmp (Make sure your directory have enough space).
unzip p10404530_112030_LINUX_1of7.zip
unzip p10404530_112030_LINUX_2of7.zip
Open the xmanager (xstart) or directly from the Gnome.
1. Test if Display is ok by issue command xclock or xlogo
$ xlogo
2. Run the installer cd /tmp/database
$ ./runInstaller
11202
p10098816_112020_LINUX_1of7.zip
p10098816_112020_LINUX_2of7.zip
11201
linux_11gR2_database_1of2.zip
linux_11gR2_database_2of2.zip
Regards,
Hafiz

11g Release 2 installation on Oracle Linux 6

Aloha!
I I'am installing 11g Release 2 Database on Oracle Linux 6 but i stumble on this problem, that i cant install the said application, either I,m running the wrong file or i downloaded the wrong installation kit for OL 6.
1) I downloaded "Oracle Database 11g Release 2 (11.2.0.1.0) for Linux x86" installer. Extracted it and paste it on Oracle Linux 6 OS.
2) I access the directory where i paste the said installer and run "runInstaller" file and i'm having a prompt saying "Permission denied".
Could it be that the installation kit I downloaded is not for Oracle Linux 6. Is there something that I miss thats why I'm having this prompt?
Thanks in advance.
Hades,

Hi Dude,
I did manage to install OLE 5 and installed successfully 11gR2 on it. I'm on the process of creating an instance on the said database, but i stumble on several errors;
1. ORA-09925: Unable to create audit trail file
after clicking OK i will receive this error;
2. ORA-01017: invalid username/password; log on denied
and after;
3. ORA-01012: not logged on
This prompts appears during the creation on instance. Please refer below for reference.
[oracle@ole5 ~]$ id
uid=501(oracle) gid=501(oinstall) groups=501(oinstall),502(dba),503(oper),504(asmadmin)
[oracle@ole5 ~]$ env|sort
CLASSPATH=/u01/app/oracle/product/11.2.0/db_1/jlib:/u01/app/oracle/product/11.2.0/db_1/rdbms/jlib
COLORTERM=gnome-terminal
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-AnrEnr2Rfk,guid=64a668470bd8d74af646f6004e0de25b
DESKTOP_SESSION=default
DESKTOP_STARTUP_ID=
DISPLAY=:0.0
G_BROKEN_FILENAMES=1
GDMSESSION=default
GDM_XSERVER_LOCATION=local
GNOME_DESKTOP_SESSION_ID=Default
GNOME_KEYRING_SOCKET=/tmp/keyring-IwnPgJ/socket
GTK_RC_FILES=/etc/gtk/gtkrc:/home/oracle/.gtkrc-1.2-gnome2
HISTSIZE=1000
HOME=/home/oracle
HOSTNAME=ole5.localdomain
INPUTRC=/etc/inputrc
LANG=en_US.UTF-8
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/db_1/lib:/lib:/usr/lib
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:.cmd=00;32:.exe=00;32:.com=00;32:.btm=00;32:.bat=00;32:.sh=00;32:.csh=00;32:.tar=00;31:.tgz=00;31:.arj=00;31:.taz=00;31:.lzh=00;31:.zip=00;31:.z=00;31:.Z=00;31:.gz=00;31:.bz2=00;31:.bz=00;31:.tz=00;31:.rpm=00;31:.cpio=00;31:.jpg=00;35:.gif=00;35:.bmp=00;35:.xbm=00;35:.xpm=00;35:.png=00;35:.tif=00;35:
MAIL=/var/spool/mail/oracle
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
ORACLE_HOSTNAME=ol5-11gr2.localdomain
ORACLE_SID=DB11G
ORACLE_UNQNAME=DB11G
PATH=/u01/app/oracle/product/11.2.0/db_1/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
PWD=/home/oracle
SESSION_MANAGER=local/ole5.localdomain:/tmp/.ICE-unix/2727
SHELL=/bin/bash
SHLVL=2
SSH_AGENT_PID=2763
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_AUTH_SOCK=/tmp/ssh-AUwvgn2727/agent.2727
TERM=xterm
TMPDIR=/tmp
TMP=/tmp
USERNAME=oracle
USER=oracle
_=/usr/bin/env
WINDOWID=24117329
XAUTHORITY=/tmp/.gdmZKBUXV
XMODIFIERS=@im=none
[oracle@ole5 ~]$
Thanks in advance.
With Thanks,
Hades

DISPLAY issue Oracle Database 11gR2 Installation On Oracle Linux 6

Hello All,
I am trying to install Oracle 11gR2 on Oracle Linux 6. I get the below error when running the installer.
[oracle@oelinux database]$ pwd
/home/oracle/install/database
[oracle@oelinux database]$ ls
doc install response rpm runInstaller sshsetup stage welcome.html
[oracle@oelinux database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 38234 MB Passed
Checking swap space: must be greater than 150 MB. Actual 3023 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Appreciate your help in advance. Thanks.

Dude wrote:
VNC certainly has it's beauty and advantages. I was under the impression though that the OP is trying to run OUI on a local server console that is runnig a graphical desktop. If that wasn't the case, VNC was certainly a preferable option.I have not done a local GUI console installation of Oracle in years. In fact, I'm known to start foaming at the mouth when discovering a server running X on the console, disabling it interactively, preventing initlevel 5 from ever loading X again, and leave comments of my disgust in inittab. ;-)
If I'm not mistaken then the vncserver does not need to have the X server running since the necessary support is built-in. The installation of X libraries is probably still required, but I'm not sure.It needs a X display manager. And xterm. twm does fine as display manager. Small and minimalistic. Not the greatest of ideas loading an entire Gnome desktop in VNC.
Btw, Apple Mac OS X provides seamless X11 support and uses VNC for screen sharing and even for installing a system remotely. If you use Apple Mac to access a remote Linux system, using ssh with X forwarding is very convenient as it works right out of the box without having to configure the remote Linux server.Nice. OS/X has come a long way the last few years. I recall a time when they pretended there was no "stinking" command line. :-)

Grid Infrastructure Installation on Oracle Linux 5.8

Hi,
*1)* I am trying to install 11.2.0.1 Grid Infrastructure on Oracle LInux 5.8 but failing. It fails at ASM diskgroup creation stage.
The uname -r output is as below.
2.6.32-300.10.1.el5uek
How do we find out if a particular kernel version "uname -r" is OK for installation or not ?
I checked many documentation, but they only say Oracle Linux 5 or above OR Oracle Linux 4 or above in many cases.
*2)* Also can 11gR2 RAC be installed on Oracle Linux 6.3 ? The uname -r for Linux 6.3 is as below.
2.6.39-200.24.1.el6uek.x86_64

*1)* I am trying to install 11.2.0.1 Grid Infrastructure on Oracle LInux 5.8 but failing. It fails at ASM diskgroup creation stage. and the error message is ... ?
The uname -r output is as below.
2.6.32-300.10.1.el5uek
How do we find out if a particular kernel version "uname -r" is OK for installation or not ?
I checked many documentation, but they only say Oracle Linux 5 or above OR Oracle Linux 4 or above in many cases.http://docs.oracle.com/cd/E11882_01/install.112/e22489/prelinux.htm#BABFDJJF
*2)* Also can 11gR2 RAC be installed on Oracle Linux 6.3 ? The uname -r for Linux 6.3 is as below.
2.6.39-200.24.1.el6uek.x86_64Oracle Linux 6 is supported starting with *11.2.0.3*

Oracle VM installation on Oracle Linux 5.6 host

Hi All,
I am trying to install the oracle virtual machine 4.2 on Oracle Linux 5.6 host.it is throwing me error related to DKMS. Error message is like below.
stopped Kernel Modules = OK
uninstalled Old Virtualbox DKMS kernel modules = OK
But then I get two fails.
Trying to register the Virtualbox kernel using DKMS = FAILED
Recompoling VirtualBox Kernel = FAILED
when I execute yum update , message is "nothing to update". Also there is no directory inside /usr/src/kernels. I have created on manually as /usr/src/kernels/`uname -r` and set it as KERN_DIR. Still it is showing the same error message.
It seems that I need to install DKMS and update the yum repository then proceed for the VM installation.
Please tell me the method for this as I could not figure out any method to resolve this so far.
Any help is much appreciated.
Thanks & Regards,
Rahul Verma
Cell : <telephone number removed by moderator>
Edited by: rukbat on Jan 8, 2013 9:05 AM
These forums are NOT a way to contact Oracle Support but are publicly readable across the entire Internet...
When you publish your phone number, it will get harvested by spammers and you will get calls forever ...

Hi ,
Can someone please help me how to install DKMS and update the yum repository.
Regards,
Rahul

Re-installation of oracle 9i enterprise edition

Hi Friends,
I am new and self studying DBA . I just want to know that can I delete services after unintallation of oracle9i as I want to reinstall oracle9i database because I am facing some problem with the earlier intallation. After unintalling oracle when I started new installation of oracle it is giving error that services are already exist.
Please help me..
Thanks

Yes you can delete the services. Below link helps you in deleting services
http://www.cryer.co.uk/brian/oracle/howto_uninstall_oracle9i.htm

Could not find Wireless network configuration Oracle linux Enterprise

HEllo,
I was able to install oracle linux OS on my laptop and I was able to use internet thru wired network, but I tried to config the wireless network and I could not find any docs or online source to config wireless network on OLE machines.Belwo is the source that i used for installing the linux, he gave only one scrrenshot for network configuration where I see wireless tab also,but nothing is working when i configure wirless
http://www.oracle-base.com/articles/linux/oracle-linux-6-installation.php

iamsid wrote:
HEllo,
I was able to install oracle linux OS on my laptop and I was able to use internet thru wired network, but I tried to config the wireless network and I could not find any docs or online source to config wireless network on OLE machines.Belwo is the source that i used for installing the linux, he gave only one scrrenshot for network configuration where I see wireless tab also,but nothing is working when i configure wirless
http://www.oracle-base.com/articles/linux/oracle-linux-6-installation.php
Wrong forum. Your question has nothing to do with Oracle Database Installation. You might try the [url https://forums.oracle.com/forums/forum.jspa?forumID=822] Oracle Linux forum..
When you post there it will be helpful if you will provide some detail on what you actually did and and the result. So far all you've really said is "Here is a picture of a Ford. Why can't I get my Chevy to run?"

Error on installing the EM 12c installation on Oracle Linux x86 32bit

Helloo,,
I was trying to install Oracle EM 12c on Linux , when i reach to the step of inserting the password of SYS administator , i pressed next button , then a pop message came, to do a deconfig process, so i did as follows, the the error came
[oracle@localhost bin]$ emca -deconfig dbcontrol db -repos drop -SYS_PWD ***** -SYSMAN_PWD ******
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/assista nts/util/sqlEngine/SQLFatalErrorException
Caused by: java.lang.ClassNotFoundException: oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: oracle.sysman.emcp.EMConfigAssistant. Program will exit.
NOTE: this is on the Virtual Box
Regards,
Smartguy

So ...
After a lot of searches, it was necessary a help from a Weblogic Administrator to find out what was going on with the installation process. The problem was with the memory allocation to the Weblogic VM. The process EMGC_OMS1 could not be started cos it was not possible to create a VM into SERVERADMIN.
With just my DB experience I could not find any logs besides emctl.log and that one that it's shown in OEM Installler interface. The Weblogic Administrator was browsing the HOME where the Weblogic was installed and he found logs that showed the error telling where the problem was. Even downloading the OEM 12c 32bit, it was allocated memory to the java as if it was 64bit. The solution was decreasing the values of memory and clicking in Retry. So, my OEM Cloud Control 12c it's working now.
Regards
Bruno Palma

Basic installation: X11 for Oracle Linux 6.3

Hi All,
I created Oracle VM and installed Linux 6.3 as operation system. First try with X Windows and X11 shows, that I can not start X-Appse.g. xclock --> command not found!
How can I correct install oderwise configure X11 for Oracle Linux 6.3
Regards,
Moh

I guess Oracle VM VirtualBox and Oracle VM can be misleading. Oracle should better call it Oracle Virtualbox, without VM in the name. Fyi: http://www.oracle.com/us/technologies/virtualization/oraclevm/index.html
Anyway, a default installation of Oracle Linux or RHEL 6 does not install the X Window system and a graphical user desktop. If you want to run X11 applications you have 2 options:
- Use remote access from a system that has X Window server installed
- Install X Window and a window manager on your virtual machine.
If this is a new installation and you use it locally then I suggest to re-install the system and customize the package selection. You should see a prompt "customize now" during the installation where you can select the Desktop packages.

Step by step installation of oracle Weblogic 12c .

I am new one in oracle middleware Plz tell me.

check the oracle documentation: http://docs.oracle.com/goldengate/1213/gg-monitor/GMINS/prepare.htm
or this helpful link: ORACLE-BASE - Oracle WebLogic Server (WLS) 12c Release 3 (12.1.3) Installation on Oracle Linux 5 and 6
HTH
Borys

Silent install of oracle 11.2.0.1.0 on oracle linux 6.4 64 bit edition

Hello,
What files do I need to alter to install oracle 11gR2 {11.2.0.1.0}[1] rdbms ontop of a local install of oracle linux 6.4 64 bit edition ?
I want to do the install in silent mode from the command line.
-oracle linux 6.4 installed and updated with the latest patches.
Thanks Glenn
[1]
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
linux.x64_11gR2_database_1of2.zip
linux.x64_11gR2_database_2of2.zip

please find below link, it is having step by step oracle 11g installtion on oracle linux5
please fallow up to Installation ..dont invoke directly ./runInstaller.
go to unzip directory..u may find respance folder in taht edit.rsp file as per the your requirement.
please post .rsp paramters details..will guide you what needs to be set....if know the parameters...edit it and save ...then execute below
go to runInstaller having folder..the execute below cmd.
./runInstaller -silent -responseFile /u01/Disk1/responce/rsp11g.rsp DECLINE_SECURITY_UPDATES=true
http://www.oracle-base.com/articles/11g/oracle-db-11gr2-installation-on-oracle-linux-5.php

How to install Oracle 9i on Oracle Linux?

I'm an experienced professional on Microsoft Technologies.
I need to learn Oracle 9i running on Linux in the next months.
So, I installed Oracle Linux on a VMware Virtual Machine.
When I tried to start the installation of Oracle 9i, I got the following error message:
"../jre/bin/i386/native_threads/java: error while loading shared libraries: libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory"
How to fix this?
Thanks!!!
Felipe

This is exactly the documentation I was following.
The first problem is that I'm using Oracle Linux Enterprise Release 5 and I don't know what Red Hat version is similar. This link mentions only Red Hat distributions.
When I faced the problem, I saw the explanation from that link, where I should install the compat-libstdc++ RPM. For Red Hat 9, I should run:
rpm -ivh compat-libstdc++-7.3-2.96.118.i386.rpm
What should I run on Oracle Linux Enterprise Release 5?

Oracle Linux: Probleme mit Paketinstallation

Hallo,
ich habe Oracle Linux Server 6.3 installiert.
Für die Installation der Oracle Database 11.2 müssen Pakete nachinstalliert werden.
Meist sind es Pakete in einer älteren Version, die erforderlich sind.
Mit dem Programm "Software hinzufügen/entfernen" war es leider nicht möglich die erforderlichen Pakete zu finden. Bei dem Versuch einer manuellen Installation mit dem Paketmanager RPM (dieses Oracle Linux basiert auf einem RedHat Linux) treten nur Fehler auf oder es funktioniert einfach nicht.
Weiß jemand, was ich falsch mache? Wie werden RPM-Pakete normalerseise installiert? Bzw. wie überspiele ich ein aktuelles Paket, beispielsweise mit der Version 1.4, mit einem Paket älterer Version, z.B. 1.3?
Wäre für eine Hilfestellung sehr dankbar.
Viele Grüße
Kiesel

Hallo,
please note this is an English Forum. I'll give you a quick hint in German, in the hope to get you started.
Pakete werden normalerweise mit dem Kommandozeilen-Werkzeug "yum" installiert. Die Installation der Datenbank auf Oracle Linux 6 läßt sich am Einfachsten mit Hilfe dieser Beschreibung und des "-preinstall" RPMs durchführen:
"How I Simplified Oracle Database 11g Installation on Oracle Linux 6" - http://www.oracle.com/technetwork/articles/servers-storage-admin/ginnydbinstallonlinux6-1845247.html

Installation of Oracle DB 10.2.0.4 on Oracle Linux Enterprise 5.4

Similar Messages

Maybe you are looking for