Installation of Oracle EBusiness Suite 11i Release 10.2 on Red Hat Linux

Hello there,
It would be great if someone can help me with these questions
1. Which version of Red Hat Linux is suitable for installation of Oracle EBusiness Suite 11i Release 10.2.
2. I am downloading the EBS files from eDelivery site on my machine (Windows based). These are Zip files. How would these be usable on Linux machine?
3. Do I need stuff like MKS Toolkit on Linux? We tried installing on Windows 2003 server but had to abandon because we don't have MKS Toolkit. Is there some such pre-requisite on Linux?
Thank you.
Rahul

Copy all zip files to say /data/stage11i then unzip all files (as root) the process will create the correct file structure, you do not need to run adautostge.pl then in a terminal screen go to /data/stage11i/Disk1/rapidwiz and then type ./rapidwiz the installation wizard then guides you through the rest of the way. Run raoidwiz as root if you need multi user or for the demo single user run rapidwiz as oracle. Make sure you have created user and group for oracle and applmgr, also make those changes in the wizard it often defaults to say user oravis group dba. In linux you should have created localhost.localdomain sometimes the eth0 does not start, stop it in the device manager and then reactivate. Hope that helps.

Similar Messages

Installation of Oracle EBusiness Suite 11i Release 10.2 on Suse Linux 9

Hi,
I have been going thru this forum and got some great tips but am still having problems installing it on Suse Linux Enterprise 9. The reason for failure is at 20% - adrun9i.sh script. Initially it was giving me error while unzipping the files, now it passes that step but gives error while configuring db. I am not sure what the problem is. I have set all the possible kernel parameters. Any help is appreciated?
Thanks in advance,

I had the same issue, though I cant remember the percentage anymore, but it was whilst on Database Disk 2.
What I found out was that the DVD in which that zipXX file was had a CRC error, and the size of the .dbf (I think it was a xxxtx.dbf file) was smaller than expected, cos I manually unzipped this file during a rerun of the installation which finally succeeded. Unfortunately, the DB srung the error after I tried forcing it to mount and open.
I have now installed the same on SLES9, after I downloaded a fresh set of files from edelivery.oracle.com ( Its a nightmare if you have a slow broadband - Lasted me about 2 weeks, using a download manager)
You can see the article written by Micheal B on coolnotes in the Novell site, and get in touch if further assistance is needed.
Good Luck if you havent given up on the idea

Standard Manager is not working in Oracle Ebusiness Suite 11i

Hi,
Can anyone help me ...
Standard Manager is not picking up any requests in Oracle Ebusiness Suite 11i while other managers are picking up their requests and running it fine.
Regards
Ketan.

Hi Hussein,
I have tried bouncing CM, Cmclean was also executed, but still the same issue exists.
One more thing which i have identified is when i include some concurrent request to Standard Manager , then that request is picked up by standard manager and it is running fine.
But this can be a workaround to the issue. We cannot simply keep on including concurrent request to Standard Manager.
So we are looking for a solution where Standard Manager should automatically pick up the request and run it fine. Which it was doing it earlier.
Regards

Installation issue- Oracle SOA Suite 10g Release 3 (10.1.3.x)

Hi,
I am installating (basic installation) Oracle SOA Suite 10g Release 3 (10.1.3.x), I have Vista OS. Configuration assisstant ran successfully till (App server, ESB, BPEL prcoess manager) it reached to Web Services Manager. It threw up following error-
BUILD FAILED
C:\product\10.1.3.1\OracleAS_3\owsm\scripts\install.xml:1971: The following error occurred while executing this line:
C:\product\10.1.3.1\OracleAS_3\owsm\scripts\dataload.xml:199: java.sql.SQLException: Internal Error:Invalid Connect String
I have JDeveloper installed on my system. Let me know if you need the log file.
Any help is greatly appreciated.

Andre,
I am a newbee in this field and I could not understand your question. Can you please explain? I downloded Oracle JDeveloper to design BPEL processes and trying to install Oracle SOA suite for BPEL process manager, that is where I hit this road block.
Thanks

Is it possible to download Oracle Ebusiness Suite 11i?

Dear Sirs,
I checked the e-delivery and there is only ebusiness suite 12 for download. Am I missing something? or there is no way I could get Oracle EBusiness 11i?
thanks you
regards

Hi,
I checked the e-delivery and there is only ebusiness suite 12 for download. Am I missing something? or there is no way I could get Oracle EBusiness 11i?Log a SR and ask Oracle Support to send you the Media Pack as 11i software is not longer available for download from Oracle e-Delivery website.
oracle e-business suite release 11.5.10 for windows
oracle e-business suite release 11.5.10 for windows
Regards,
Hussein

Error while installing oracle 9i(9.2.0.1.0) on Red Hat Linux 8

hi
friends,
i'm getting error while installing Oracle 9i(9.2.0.1.0). this eror was came when linking process was going on. Error is as follow.
"Error in invoking target install of make file"
/home/oracle/product/9.2.0/plsql/lib/ins_plsql.mk"
/home/oracle/product/9.2.0/precomp/lib/ins_precomp.mk"
/home/oracle/product/9.2.0/sqlplus/lib/ins_sqlplus.mk"
/home/oracle/product/9.2.0/network/lib/ins_oemagent.mk"
pls. help me what to do?
Dharmesh

See this :
I saw this error only in connection with Oracle 9i (9.0.1) installation.
Edit the file $ORACLE_HOME/bin/genclntsh and change the following line (people have sent me emails pointing out that this also works for Mandrake 8.1 and Mandrake 8.2):
LD_SELF_CONTAINED="-z defs"
to read:
LD_SELF_CONTAINED=""
Then run the script $ORACLE_HOME/bin/genclntsh as the user "oracle" and not as the user "root". Also make sure you have all the Oracle environments set! (I got so many emails because people were not doing this)
$ su - oracle
$ $ORACLE_HOME/bin/genclntsh
Created /opt/oracle/product/9.0.1/lib/libclntst9.a
$
After that hit retry in the error popup. This always worked for me.
(I was told that this also works for SuSE 8.0.)
Here is Oracle's official solution for Oracle 9iR1 or 9iR1 iAS on RedHat 2.1 Advanced Server:
http://otn.oracle.com/software/products/oracle9i/files/binutils_readme.html
from: http://www.puschitz.com/OracleOnLinux.shtml
Hope it help you
Basem

How to Stage EBusiness Suite 11i (media) DVDs to linux server

I've just recevied the media for Oracle Ebusiness Suite 11i in DVD format. I do not have a DVD reader on the VM paravirtual server which is where I need to install Oracle EBusiness Suite. As such I need a way to copy the entire DVD media to a file and then place that file into its own directory and unpack it so that I can install via rapidwiz.
What are some options for staging the EBusiness Suite media DVDs? . I have to mount each DVD and then is there a way to copy the contents of the DVD to one file so that I can then copy it to the desired server directory and then install?
Thanks

Pl indicate which version of 11i DVDs. The process to stage the software is documented in Chapter 1 of the Install Guide - http://download.oracle.com/docs/cd/B25516_18/current/acrobat/r115102ins.pdf
HTH
Srini

Installation of OracleAS 10g on Red Hat Linux ES 3.0

Installation of Oracle AS 10g on RedHat ES 3.0
Red Hat Enterprise Linux 3
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1.     Boot the server using the first CD.
o     You may need to change your BIOS settings to allow booting from the CD.
2.     The boot screen appears with the boot: prompt at the bottom of the screen.
o     Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o     The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3.     Language Selection
o     Accept the default.
4.     Keyboard Configuration
o     Accept the default.
5.     Welcome Screen
o     Click on Next.
6.     Mouse Configuration
o     Accept the default.
7.     Installation Type
o     Select Custom.
8.     Disk Partitioning Setup
o     A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9.     Boot Loader Configuration
o     Accept the default.
10.     Network Configuration
o     It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o     A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o     In the Hostname box, select manually and enter the hostname.
o     In the Miscellaneous Settings box, enter the remaining network settings.
11.     Firewall Configuration
o     For the purposes of this walk-through, no firewall is configured. Select No firewall.
12.     Additional Language Support
o     Accept the default.
13.     Time Zone Selection
o     Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14.     Set Root Password
o     Enter a password for root, and enter it again to confirm.
15.     Package Group Selection
o     Select only the package sets shown here. Leave all others unselected.
o     Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o     Applications
- Editors
- Graphical Internet
o     Servers
- Do not select anything in this group.
o     Development
- Development Tools
o     System
- Administration Tools
o     Red Hat Enterprise Linux
- Do not select anything in this group.
o     Miscellaneous
- Legacy Software Development
o     Click on Next to proceed.
16.     About to Install
o     Click on Next.
17.     Installing Packages
o     Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18.     Graphical Interface (X) Configuration
o     Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19.     Monitor Configuration
o     Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20.     Customize Graphical Configuration
o     Accept the defaults.
21.     Congratulations
o     Remove the installation media from the system, and click on Next.
22.     The system automatically reboots and presents a new welcome screen.
o     Click on Next.
23.     License Agreement
o     Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24.     Date and Time
o     Set the Date and Time.
o     If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25.     User Account
o     Create an account for yourself.
o     Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26.     Red Hat Network
o     If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27.     Additional CDs
o     Click on Next.
28.     Finish Setup
o     Click on Next.
29.     A graphical login screen appears.
30.     Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc     /usr/bin/gcc323
mv /usr/bin/g++     /usr/bin/g++323
ln âsf /usr/bin/gcc296     /usr/bin/gcc
ln âsf /usr/bin/g++296     /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb     (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin     (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y               (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora     â¦     oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan Ali
@CES
[email protected]

Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
     oracleasmlib-1.0.0-1.i386.rpm \
     oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant

Installing 11i apps on windows xp and Red Hat linux AS 3.0

Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
Virendra

I have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev.

Installation Error with 10.1.3.1 on Red Hat Linux 4

Hi,
I am installing Oracle Application Server 10.1.3.1 on Red Hat Linux 4, and am receiving the following error:
Error in invoking target install of make file ins_sqlplus.mk. If I hit 'Ignore', I continue to receive errors regarding the makefile, and the configuration assistants fail.
What do I need to do to avoid getting this error? I am having a lot of trouble getting this installation to work successfully.
Thanks in advance for the help,
Nora

Hi Nora,
Just read pre-install steps well. I think you 're missing a couple of libraries at your OS.
So the only thing as I mentioned check pre-install steps or download pre-install script for AS9.0.4
https://metalink.oracle.com/metalink/plsql/f?p=130:14:4077412560366893878::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,270683.1,1,1,1,helvetica
The output will help you to determine what you are missing.
one more thing check your ENV & swap
Hear from you & regards,
Hamdy

ORA-01017: OS Authentication on Red Hat Linux 6.2 and Oracle 11gR2

Hello
I am trying to eanble OS Authentication on Oracle 11.2.0.3 installed on a Red Hat Linux Server 6.2 and it just does not work. When I try to login I always get the error ORA-01017: invalid username/password; logon denied
I have set the following Oracle parameters:
remote_os_authent = TRUE
os_authent_prefix = OPS$
and i have created a linux user "oracle" and the Oracle user "OPS$oracle".
I know that the parameter remote_os_authent in 11g is depricated but i thought that it still should work, just an error messages occures then i start the database but it runs as usual, just the OS Authentication does not seem to work.
Does anyone knwo where the problem could be?
Oracle said that remote_os_authent is depricated because as it is risky, i know that, but my database is in a secure environment without any connection to the internet. What other way would there be without using remote_os_authent?
Thank you very much for your help.
Regards Bernhard

Thanks for the link, i found that i used a case sensitive user name as i created the user with "OPS$USERNAME" and this was why i cound not connect with that user.

How to integrating APEX with the Oracle eBusiness suite release 11i

I need to integrate Apex with Oracle eBusiness Suite Release11. APEX need to use ERP authentication (user name/password) and oracle APEX pages will be called from oracle eBusiness Relese 11i menu.
I have followed metalink doc. 373604.1 and also looked into http://www.oracle.com/technology/products/database/application_express/pdf/Extend_Oracle_Applications_11i.pdf
I have setup DAD on Apache server, oracle Apps functions/menu and created apex_authorise function and added to my APEX application. I have followed the all the steps from above pdf file.
Here is my issues:
1. When I try to launch a APEX page again it asking me for the user name password
2. If I remove login page from APEX application then I can launch my APEX application but I cannot see any images
3. I need to pass oracle ERP 11i user and responsibility information to APEX. How should I do this?
Any help will be really appreciated
Thanks in advance

Many customers want this and would have hoped that Oracle would have included this as an option. Unfortunately, the left hand(Oracle Apps product managers) don't talk to the right hand(Apex product managers). They totally missed this great opportunity to make life much easier for Oracle Apps customers who have been waiting for this capability that Apex provides. At the present time this is somewhat a black hole. There are people who have figured it out but no one has provided the recipe for everyone else. It's very unfortunate and a complete oversight by Oracle in my opinion. They've got thousands of people developing code but no one had any foresight to see who would use Apex and how they would use it.

Oracle Ebusiness Suite Release 12.1 for Linux

Hi,
I have installed a Fresh Instance of Oracle Ebusiness Suite Release 12.1.1.
Installation using rapidwiz was completed without any issue and I could login as sysadmin to the portal http://ora12.mycom.com:8000
When I restarted the System, the portal gave error. So I checked the processes, and found that none of the processes were started.
I feel that there must be some post installation tasks. But the documentation does not mention any thing for Auto Start at system boot.
Can some one point me to the task list?
Thanks in Advance

I have installed a Fresh Instance of Oracle Ebusiness Suite Release 12.1.1.What is the OS?
When I restarted the System, the portal gave error. So I checked the processes, and found that none of the processes were started.Did you start the services using adstrtal.sh script? Please issue "adopmnctl.sh status" command to confirm -- http://docs.oracle.com/cd/B53825_08/current/acrobat/121admp.pdf (Page 1-23, Starting and Stopping Application Tier Services).
I feel that there must be some post installation tasks. But the documentation does not mention any thing for Auto Start at system boot.
Can some one point me to the task list?No additional steps are required for starting the services and you will have to start it manually after rebooting the server.
Please make sure you have completed all the steps in the installation docs.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Thanks,
Hussein

How to Integrate Oracle Ebusiness suite to FDQM to load into Essbase

Hi Experts,
I need a document regarding how to integrate Oracle EBS to FDQM.I am taking target as Essbase.I know how to integrate to HFM and loading the data to HFM.So please share me the document like How to get source file from E-Buisiness suite to load into Essbase.Pleaae share with an example
Thanks in advance

Hi;
How to install Oracle Ebusiness suite R12.1.3 on RAC environmentsCheck below thread's mention note advice
Rrac-EBS wiht asm
Re: RAC for EBS R12
rac-r12-ebs-asm
Re: EBS R12 with RAC and ASM on AIX 5.3
RAC-R11-R12
Upgrade the 11.5.10.2 Instance with 10gRAC setup
How to implement shared appl top Shared appltop in R12
Shared appltop in R12
How to configure https for Oracle Ebusiness Suite R12.1.3Enabling SSL in Release 12 [ID 376700.1]
Enabling SSL with Oracle Application Server 10g and the E-Business Suite [ID 340178.1]
Also see*Steven Chan's blog entery*:
http://blogs.oracle.com/stevenChan/2009/08/ssl_advanced_configuration_wizard_ebs12.html
Regard
Helios

Oracle EBusiness Suite Adaptors

Hi,
I am looking into using the adaptor for Oracle EBusiness Suite which comes with BPEL. I am unclear as to whether I need to obtain a separate license to use the adaptor or does all the functionality come with the SOA Suite Licence (including BPEL).
Thanks
Andy

How much memory do you have on this server?
I allocate around 3GB of memory to vmware.Oracle EBS R12 requires a minimum of 4 GB RAM, so allocating 3 GB to this VM is not enough.
Please also see these docs/links.
R12 on Oracle linux: how to tune the R12?
Re: R12 on Oracle linux: how to tune the R12?
Note: 396009.1 - Database Initialization Parameters for Oracle Applications Release 12
Thanks,
Hussein

Installation of Oracle EBusiness Suite 11i Release 10.2 on Red Hat Linux

Similar Messages

Maybe you are looking for