Installation of oracle fail safe on windows cluster - plz very urgent

hi everybody,
this is the first time i am going to install oracle failsafe on windows clusters.
i am going to install oracle 9i release 2 software.
so i have to install the patches.
plz tell me with oracle cmds how to do the following.
1. after installing oracle 9i rel 2 how to install the patches to it in windows environment?
2. how to create oracle database on one node using shared disk for storage.
3. how to install oracle fail safe on each cluster?
4. how to configure cluster using fail safemanager?
plz provide me soln asap very urgent.
and don't forget to give me the soln with commands aqnd step by step.
plz plz plz
thanks in advance
suresh

For 9i , this is better:
http://download-uk.oracle.com/docs/cd/B10501_01/rac.920/a96600/toc.htm

Similar Messages

11.5.9 + Oracle Fail Safe on Windows 2000

Hello, I need to know if Oracle E-Business Suite 11.5.9 is it certified against Oracle Fail Safe on Windows 2000, I just checked the certification matrix on metalink, but, there's no information about 11.5.9.
Thanks in advance,
Marco Correa
Technical Consultant
EP e-solutions
[email protected]

user4428447 wrote:
Can I Install Oracle Fail Safe with Oracle 11.1.0.6.0 on 64 bit Servers ? If Yes how otherwise what is the alternative ?
Yes ....
http://download.oracle.com/docs/cd/E16161_01/doc.342/e14976/toc.htm#insertedID3
http://www.oracle.com/technetwork/database/windows/index-082893.html
Regards
Rajesh

Win 2003 Cluster + Oracle Fail Safe + Dataguard (physical & Logical)

Hello, 
 
It´s my first post (sorry for my bad english)...I am mounting a high availability solution for test purpose. For the moment i mount the following and runs ok, but i´ve a little problem with the logical database: 
 
Configuration 
ESX Server 2.0 with this machines: 
Windows 2003 Cluster (Enterprise Edition R2, 2 nodes) 
* NODE 1 - Oracle 10gR2 + Patch 9 + Oracle Fail Safe 3.3.4 
* NODE 2 - Oracle 10gR2 + Patch 9 + Oracle Fail Safe 3.3.4 
c:/Windows Software 
e:/Oracle Software/ (pfile -> R:/spfile) 
 
Virtual SAN 
* Datafile, Redos.. are in Virtual SAN. 
R:/ Datafiles & Archivers & dump files & spfile 
S:/ , T:/ ,U:/ -> Redos 
V:/ Undo 
 
Data Guard 
* NODE3 Physical Database 
* NODE4 Logical Database 
 
The Oracle Fail Safe and windows cluster run OK, the switchs... 
The physical database runs OK... (redo aply, switchover, failover, all ok) but the logical receives the redos ok but it has a problem when goes to apply the redo. 
 
The error is the following: 
ORA-12801: error señalizado en el servidor P004 de consultas paralelas 
ORA-06550: linea 1, columna 536: 
PLS-00103: se ha encontrado el simbolo "," cuando se esperaba uno de los siguientes: 
(- + case mod new not null <an identifier>
<a double-quoted delimited-identifier><a bind variable><avg count current exists max min prior sql stddev sum variance execute forall merge time timestamp interval date <a string literal with character set specification><a number> > a single-quoted SQL string> pipe <an alternatively quoted string literal with character set specification> <an alternativel. 
update "SYS"."JOB$" set "LAST_DATE"=TO_DATE('11/09/07','DD/MM/RR'), 
 
This sql statement i saw in dba_logstdby_events and was joined with the error in alert log and dba_logstdby_events. 
 
I´m a bit lost with this error. I don´t understand why the logical database can´t start to apply the redos received from primary database. 
 
The database has two tables with two columns one integer and the other a varchar2(25). She hasn´t rare types of columns. 
 
Thanks a lot for any help, 
Roberto Marotta 

I recreate the logical database OK, no problem, no errors. 
 
The redo aply run ok. I have done logfile switch in primary database and they were applied in logical and standby databases. But... 
 
When I created a tablespace in primary database when i did a switch logfile in primary the changes transfers ok to standby database, but to logical NO!!!, the redo are in they path in logical ok, but when the process tried to apply, reports me the same error. 
 
SQL> select sequence#, first_time, next_time, dict_begin, dict_end, applied from dba_logstdby_log order by 1; 
 
SEQUENCE# FIRST_TI NEXT_TIM DIC DIC APPLIED 
--------- -------- -------- --- --- ------- 
138 14/09/07 14/09/07 NO NO CURRENT 
139 14/09/07 14/09/07 NO NO CURRENT 
 
SQL> select event_time, status, event from dba_logstdby_events order by event_time, timestamp, commit_scn; 
 
14/09/07 
ORA-16222: reintento automatico de la base de datos logica en espera de la ultima accion 
14/09/07 
ORA-16111: extraccion de log y configuracion de aplicacion 
14/09/07 
ORA-06550: linea 1, columna 536: 
PLS-00103: Se ha encontrado el simbolo "," cuando se esperaba uno de los siguientes: 
( - + case mod new not null <an identifier> 
<a double-quoted delimited-identifier> <a bind variable> avg 
count current exists max min prior sql stddev sum variance 
execute forall merge time tiemstamp interval date 
<a string literal with character set specification> 
<a number><a single-quoted SQL string> pipe
<an alternatively-quoted string literal with charactert set specificastion> 
<an alternativel 
update "SYS"."JOB$" set "LAST_NAME" = TO_DATE('14/09/07','DD/MM/RR'), 
 
The alert.log report the same message that the dba_logstdby_events view. 
 
Any idea¿? 
 
I´m a bit frustrated. It´s the third time that recreate the logical database OK and reproduce the same error when i create a tablespace in primary database, and i haven´t got any idea because of that.

RMAN Automatic backup/recovery with oracle fail safe, windows cluster

Hello,
I have question,
1) Whether it is possible to do "RMAN Automatic Backup and recovery" in environment as ?
Environment: -
a. Windows clustering with windows server 2003 Enterprise Edition R2 (Two Node Clustering)
b. Shared disk ( RAID )
c. Oracle 10g standard edition one
d. Oracle fail safe v3.3.3 (for redundancy)
Here we have single oracle instance operating on single database whose files are located on shared disk.
2) If answer to above question is yes please specify if there is some good documentation to it.
Any help regarding this will be greatly appreciated.
Thanks in advance,
Rahul

You just need to make sure that the RMAN scripts are always able to connect to the target database instance whether instance runs on cluster node 1 or cluster node 2
here, If oracle services(resources) will shift from Node1 to Node2 (due to media or any failure) during RMAN Backup then there will be break in connection, will it destroy my backup or will it get started automatically without any harm?
and also I want to know,
Do we need to setup another server which will have RMAN backup script running?

Error in Creating the Oracle Fail Safe Group during installation on MSCS

Hi All,
I am installing ECC 6 dual stack on MSCS.
I have done steps till CI installation as per installation guide.
I am gettig the following error in the step "Creating the Oracle fail safe group" while changing physical hostname into the virtual databse hostname using configtool in secure store parameter jdbc/pool/<SAPSID>Url as per the installation guide.
"Error occurred while working with configuration(scanning)
MSG:Error while connecting to the database"
I think it is not accepting the virtual hostname.
In our scenario CI is running CI node and DB instance is running on DB node.
I have followed the steps as per the installation guide.
Please let me know how to resolve this issue.
Database - Oracle 10g,OS is Windows server 2008 enterprse edition.
Regards,
Dinakar
Edited by: mutnuru dinakar on Jun 1, 2011 1:39 PM
Edited by: mutnuru dinakar on Jun 1, 2011 1:40 PM

Hi,
Thanks for your reply.
1) did you stop the CI before making the modifications as stated in the installation guide?
 Yes
2) is your database currently running on the same physical cluster node as your CI?
 No.Database instance is running on DB node and CI is on CI node.
3) is your database online?
 Yes,it is up and running
Please let me know if there is anyway to resolve this issue.
Regards,
Dinakar

Database control in a two node oracle fail safe cluster

os windows server 2003 r2
db 10.2.0.4
ofs 3.4.1
i've configured db control in the following
D:\oracle\product\10.2.0\db_1\BIN>emca -config dbcontrol db -repos recreate -cluster_name name_of_the_cluster
is this right?
next question
the -cluster flag and the -EM_NODE / -EM_SID_LIST parameters in the emca are only for rac?
with my configuration i can't login to my database over dbcontrol
Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor The Connection descriptor used by the client was: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=node1.blah)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ABBA)))

How to Configure the 10.2 DB Control in a Failsafe Environment
ID: 452305.1
HOWTO: PUBLISHED 17-OCT-2008
In this Document
 Goal
 Solution
 References
Applies to:
Enterprise Manager Grid Control - Version: 10.2.0.1 to 10.2.0.3
Information in this document applies to any platform.
Goal
The goal of the document is to provide the steps to configure the DB Console in an Oracle Failsafe environment.
Please note that the solution offered in this document is not certified by Oracle. It's only provided as a workaround for customers who wish to use this setup for the Database Control Console in a failsafe environment. Support for the procedure outlined in this document will be provided on a 'best efforts' approach.
As an alternative to this approach you can use Grid Control Agents to monitor a database in a failsafe environment. For more details please see:
Note 396659.1 How To Setup Grid Control Central Agent Manually in Oracle Failsafe Environment
We assume the following:
- the database binaries are installed on each node on the local disk
- you already have a failsafe group with the database, the listener, disk resource, and virtual
ip/hostname
Note: This is specific for Windows environments using Oracle Failsafe. For setting up the DB Console in Active/Passive clusters on UNIX please use the following note instead:
Note 362524.1 Configure DB Control 10.2 for use in Active/Passive High Availability Environments
Solution
1. Drop the DB Control repository and configuration files on the active node:
<ORACLE_HOME>/bin/emca -deconfig dbcontrol db -repos drop
2. Recreate the DB Control using the virtual hostname:
- in a command window do the following:
set oracle_sid=<your_sid>
set oracle_home=<your_oracle_home>
set oracle_hostname=<virtual_hostname>
cd %oracle_home%\bin
emca -config dbcontrol db -repos create
-- make sure that the virtual host name was picked up by emca (it will display a summary screen
before continuing)
3. Verify that the DB Console works fine and can be accessed using the virtual host name in the URL
4. Stop the DB Console
5. Create a directory path on the group disk resource similar to your oracle home path on the local disk.
For example:
If the oracle home on the local disk is C:\oracle\product\10.2.0\db_1 and the shared disk is D:
then create the following path: D:\oracle\product\10.2.0\db_1
Copy C:\oracle\product\10.2.0\db_1\<hostname_sid> and
C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
to D:\oracle\product\10.2.0\db_1\<hostname_sid> and respectively
D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
Remember to change the values enclosed in <> with those in your environment.
6. Delete the following directories from the local disk
C:\oracle\product\10.2.0\db_1\<hostname_sid>
C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
7. Create NTFS junction points from the local disk to the shared disk (these work like symbolic
links on UNIX) . It is your responsibility to create these.
You can find a brief guide as well as some tools that will help you create them at:
http://en.wikipedia.org/wiki/NTFS_junction_point
http://www.microsoft.com/technet ... dDisk/Junction.mspx
Important: Please note that this functionality is not certified nor supported by Oracle. Make sure you understand the
implications. Especially don't delete the junction points from Windows Explorer !!
In the end you should have the junction points on the local disk (with the same names as the
original directories) that would point to the directories you copied on the shared disk.
8. Start the DB Console service and verify that everything is still working fine.
9. Stop the DB Console service.
10. Move the Fail Safe group to the 2nd node.
11. Once the database is started, create the DB Console configuration files on the 2nd node:
<ORACLE_HOME>/bin/emca -config dbcontrol db
12. Stop the DB Console
13. Delete the created configuration files from the local disk:
C:\oracle\product\10.2.0\db_1\<hostname_sid>
C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
14. Create junction points from the local disk to the directories already located on the shared
disk.
15. Start the DB Console service and verify that is working fine.
16. Add the DB Console service as a resource to the fail safe group and put dependencies on the
database and listener services.
17. Perform a fail over and see if everything works fine.
References
Note 298238.1 - Oracle10g Grid Control with Oracle Fail Safe
Note 362524.1 - Configure DB Control 10.2, 11g for use in Active/Passive High Availability Environments
Note 396659.1 - How To Setup Grid Control Central Agent Manually in Oracle Failsafe Environment
Keywords
EMCA ; DB~CONTROL ; FAILSAFE ; DBCONTROL ; ENTERPRISE~MANAGER ;

Cluster & Oracle Fail Safe

Hi all! I need to make one instance of Oracle 8 available 24/24 7/7, so I'm searching for a "newbie" guide to configure both Windows Advanced Server and Oracle Fail Safe. Anyone can help me? Any suggests will be appreciated! Thank you very much!

Hi all! I need to make one instance of Oracle 8 available 24/24 7/7, so I'm searching for a "newbie" guide to configure both Windows Advanced Server and Oracle Fail Safe. Anyone can help me? Any suggests will be appreciated! Thank you very much!

Regarding Oracle fail safe

Hi,
We have to use Oracle fail safe in our environment (windows server 2003 R2 64 bit with Oracle 10g 64 bit).
Please if anybody have doc for this please provide and which version will be compatible.
Regs,
Brijesh

Hi Brijesh,
I used Oracle fail safe for Oracle AS 10GR2 and for Oracle 9iR2 Active / Passive cluster. Most of the documentation is provided by Oracle, and yes it helped me a lot to configure the setup. The links provided by Helios are sufficient for this.
May be you should refer this Doc as well from Oracle Metalink - Oracle Support
1) "Oracle Fail Safe Frequently Asked Questions : General Doc ID: Note:60787.1 "
2) "Oracle Fail Safe Step-By-Step Installation and Configuration Doc ID: Note:74009.1"
Cheers
Ravi

Why use oracle fail safe???

hi
i have one question..
why use oracle fail safe???
In the case windows HA System, our systems is operating Oracle database using only Windows Cluster (MSCS) without Oracle Fail Safe!!
Without oracle fail safe, our systems was installed Oracle database.....
if using oracle fail safe, how is merit???.
Thanks...

Hi Kim,
why use oracle fail safe???Refer http://download.oracle.com/docs/html/B12070_01/intro.htm#i1005996
Hope helps
Regrads,
Xaheer

Logs for Oracle Fail Safe

Hi Guys
I need to know where Oracle writes logs for Fail Safe components, Fail Safe Manager and Fail Safe server?
Any idea?
Regards
PG

user10676961 wrote:
First of all, I'm not a native English speaker, so excuse for my msitakes :8}
I have a basic knowlede of Oracle, but this is something I need help with:
I have a Windows cluster with Oracle Fail Safe. There will be multiple databases on this cluster. Oracle and Oracle Fail Safe are installed on disk D: on both nodes (local disk).
When Fail Safe creates a sample database it creates this directory structure on cluster disk O:
OFSDB
OFS1
admin
OFS1
adump
bdump
cdump
pfile
udump
flash_recovery_area
OFS1
ONLINELOG
oradata
OFS1
{code}
All database related files like parameter files are created on the cluster disk, not in Oracle Home, where they are by default.Hi
most of the directories that you refer to are controlled by initialisation parameters in the parameter file for the database. What would probably be sensible for you to do is to use DBCA not to create the database, but to create the scripts to create the database. You can then edit those scripts appropriately.
In particular the directories used in your example are controlled by these parameters
adump                           audit_file_dest
bdump                           background_dump_dest
udump                           user_dump_dest
cdump                           core_dump_dest
flash_recovery_area         db_recovery_file_dest (and db_recovery_file_dest_size)the online log directory tree will be created if you choose to use oracle managed files for the redo logs, alternatively you can manually specify them in the create database statement.
The generated scripts should contain a .bat file which precreates the admin structures.
so to recap, use dbca to create the scripts :- edit the scripts, don't set ORACLE_BASE.
Niall Litchfield
Oracle DBA
http://www.orawin.info/
Edited by: Niall Litchfield on Jan 22, 2009 8:16 AM added code tags for readability

Oracle fail safe中提示cannot move group

环境平台：
windows 2003 32 bit
oracle fail safe 3.3.3
两个主机加入windows cluster并安装了oracle fail safe
在oracle fail safe manager 中的一个cluster group点选 ‘move to a different node’
提示：the cluster group cannot be moved because is contains oracle service for mscs
觉得奇怪为什么不能move group呢，如果这样不就不能手动作fail over了。
只有在windows的 cluster管理器里面才能做move group的动作。
ps:不知道现在使用oracle fail saf的人是不是很少

可能用windows的人都不多。
我查了资料，cluster group是不能在ofs里面管理的
http://docs.oracle.com/cd/E16161_01/doc.342/e14973/concepts.htm#i1008995

Problem in Resource moving Oracle Fail safe

Hi ,
I have Os clustering Oracle Fail Safe configured here(10g enterprise Edition)
While Performin test ... cluster resources are not moving to another server due to which oracle database are not getting start on another cluster node ...
Plz help mee guys....

Hi Friend,
Please specify your Oracle Database version & Oracle Failsafe Version.
Please check the following :
1. When you configure a Fail Safe group, the most important information that you supply is the group name and the associated virtual server address.
2. The host name, database instance, SID entry, and protocol information must match on both cluster nodes and on each client system that is running Oracle Fail Safe Manager.
Hope it helps....
Thanks
LaserSoft

Oracle fail safe real time users

hello,
Please let me know about some oracle fail safe users
Thanks in Advance,
Rahul
Edited by: user10911629 on Jun 2, 2009 1:51 AM

hi rahul,
i think i have sent you some links and documents for oracle fail safe case studies...haven't they of any use?
you can refer oracle docs and can raise the SR with oracle support if you come across any issue and disaster recovery situation....
please check the documents i have given to you
and rather looking for customer case studies you should look for oracle fail safe specific doc as it is recommended by oracle, client or customer may adjust oracle fail safe architecture according to their environment, but oracle docs insist you to make environment required for oracle fail safe.
have a look for this oracle case study
http://www.oracle.com/technology/tech/windows/failsafe/pdf/fs32ds.pdf
thanks and regards
VD
Edited by: vikrant dixit on Jun 2, 2009 11:24 PM

How to download oracle fail safe

Hi,
where can I download oracle fail safe? Can I find it from otn or from edelivery or from support site?

http://www.oracle.com/technetwork/database/windows/downloads/index-093848.html

Converting Single Instance database into Oracle Fail-Safe on Linux

Hi All,
We have single instance Oracle10g database running on Linux RHEL4. We are looking to convert this database into Oracle Fail-Safe (Active-Passive). Does any one have document for Oracle fail-safe setup?
Regards,
Tushar

Tushar,
you can't use software for windows on Linux.
However, there's number of ways to implement high-availability solution on Linux Oracle.
You can go with Active-Active (RAC) - which means that you'll have two servers attached to the same database at the same time. You can use either, and if one goes down(due to power failure for instance), the second will still be available.
You can go with Active-Passive (Data Guard) - which means that you'll have one of the nodes being active and the second passive, but synchronized with the first one, so in case of failure of the first node you can activate the second one.
You can also go with linux clustering - which is most similar to MCS + fail-safe - you'll have two nodes clustered with linux clustering software (RH cluseter suite for instance) and connected to shared storage. One node is active, and in case of crash database instance will be automatically started on the second node. This is beneficial because you can use your resources more efficiently. In case if you have two databases you can run each of them on dedicated server and then, in case of node failure move to another one. However, the setup of such configuration is quite cumbersome.

Installation of oracle fail safe on windows cluster - plz very urgent

Similar Messages

Maybe you are looking for