Installation of Oracle Failed on Oracle Enterprise Linux.
Hi All,
I have installed Enterprise Linux Release 5 Update 2 for x86 (32 Bit) provided by oracle e-delivery on my Vmware Virtaul machine.When i try to install Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86,after running the runInstaller i am getting the following error.
[oracle@vmware database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Failed <<<<
Note:Oracle E-Delivery has provided 5 CD's to downlaod for Enterprise Linux Release 5 Update 2 for x86 (32 Bit).But the installation of LINUX finished succesfully with 3 CD's only.I donot have any idea for what purpose the remaining CD's 4 and 5.Do i need to install CD's 4 and 5 seperately.Is this the problem for orcle DB installation failure or is there any exclusive database which i need download for Enterprise Linux Release 5 Update 2 for x86 (32 Bit).
Any help in this issue is highly appreciated.
Thank You Very Much.
I am also getting the same error as a previous poster:
>>>
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-02-02_04-31-29PM. Please wait ...[ora10@el5a database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-02-02_04-31-29PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
<<<
I downloaded and installed Oracle EL5 (64 bit). I have a Network-level support, so I ran the up2date and picked up all the updates and installed them. My company is a licensee of 10g, so I downloaded 64bit 10g, and ungzip-uncpio'd it into a work directory. When I try to install it, it blows up at the above point.
In reading the above comments, I rpm'd libXp and libaio, but this does not change the failure of runInstaller.
Any hints?
--Ewin
Similar Messages
-
Oracle 8.1.7 install fails on RH Enterprise Linux 3
Hi!
I've been desperately trying to install Oracle 8i database to RedHat Enterprise Linux 3 (actually it's Whitebox 3.0 that is exactly the same as RH but the logos and other RH stuff stripped), with no luck. I tried to follow the numerous instructions I've found on the net for RH 7.x versions.
I've installed the glibc compat rpm's and jdk 1.1.8 from blackdown.org and the installer itself starts fine. First problem is that the installer can't detect the ip address of the host. After ignoring that, the install part goes fine but I get a lot of errors about makefiles during the linking. After ignoring the errors and fixing the buggy root.sh script, the Net8 assistant starts, and stops giving out error about missing java .so file in $ORACLE_HOME/lib directory. I checked it, but I can't find the .so file anywhere.
I've tried to exit the installer, apply the stub patch from oracle and the run dbassist which starts fine but quits after a java error.
Any ideas what should I do?This web site can help you:
http://www.puschitz.com/
Joel Pèrez -
Error in installation of OVD 11g on RedHat Enterprise Linux 5.5 x64
Hello Friends,
At the time of installation of the Oracle Virtual Directory 11g (11.1.1.6) on RedHat 5.5 I have an error message:
OUI-10136:An Oracle Home with name OH1186506688 already exists at location /opt/Middleware/OVD_home/../oracle_common. Please specify another location for Oracle Home.
According to the recommendation of Oracle Support, is to change the Home to continue the installation process, the setup time of the installation wizard does not complete the creation of domain for OVD.
Here part of the Log:
[2012-12-19T19:27:00.026-05:00] [as] [ERROR] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 37] [ecid: 0000JipTvEUFw00Fzzx0g01Go^Tz00000S,0] One or More configurations failed. Exiting
[2012-12-19T19:27:00.097-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 37] [ecid: 0000JipTvEUFw00Fzzx0g01Go^Tz00000S,0] Install Adapter: Mark End for:CONFIG
[2012-12-19T19:27:01.214-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 37] [ecid: 0000JipTvEUFw00Fzzx0g01Go^Tz00000S,0] Setting valueOf(IS CONFIGURATION SUCCESSFUL) to:true. Value obtained from:USER
[2012-12-19T23:50:35.901-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Setting valueOf(IS CONFIGURATION SUCCESSFUL) to:true. Value obtained from:USER
[2012-12-19T23:50:50.052-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Writing profile to file:/home/oracle/oraInventory/logs/installProfile2012-12-19_06-02-16PM.log
[2012-12-19T23:50:50.052-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] outputFile:/home/oracle/oraInventory/logs/installProfile2012-12-19_06-02-16PM.log
[2012-12-19T23:50:50.053-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] in writeProfile method..
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:INTERVIEW_TIME_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:COPY_TIME_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:LINK_TIME_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:CONFIGURATION_TIME_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:SESSION_INSTALL_TIME_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:OS_NAME_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:PROCESSOR_ARCHITECTURE_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:CPU_SPEED_ID for writing.
[2012-12-19T23:50:50.082-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:CPU_NUMBER_ID for writing.
[2012-12-19T23:50:50.082-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:TOTAL_MEMORY_ID for writing.
[2012-12-19T23:50:50.082-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:AVAILABLE_MEMORY_ID for writing.
[2012-12-19T23:50:50.082-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:AVAILABLE_SWAP_SPACE_ID for writing.
[2012-12-19T23:50:50.082-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:PEAK_THREAD_COUNT_ID for writing.
[2012-12-19T23:50:50.088-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:OH_PATH_ID for writing.
[2012-12-19T23:50:50.088-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:INSTALL_MODE_ID for writing.
[2012-12-19T23:50:50.089-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:OH_SIZE_ID for writing.
[2012-12-19T23:50:50.089-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:SHIPHOME_PATH_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:CPU_SPEED_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:CPU_NUMBER_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:TOTAL_MEMORY_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:AVAILABLE_MEMORY_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:AVAILABLE_SWAP_SPACE_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:OS_NAME_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:INTERVIEW_TIME_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:INSTALL_TIME_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:CONFIGURATION_TIME_ID for writing.
Any recommendations to fix this problem...
Regards.
JLK.
Edited by: JLK on Dec 20, 2012 9:34 AMHello Friends,
At the time of installation of the Oracle Virtual Directory 11g (11.1.1.6) on RedHat 5.5 I have an error message:
OUI-10136:An Oracle Home with name OH1186506688 already exists at location /opt/Middleware/OVD_home/../oracle_common. Please specify another location for Oracle Home.
According to the recommendation of Oracle Support, is to change the Home to continue the installation process, the setup time of the installation wizard does not complete the creation of domain for OVD.
Here part of the Log:
[2012-12-19T19:27:00.026-05:00] [as] [ERROR] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 37] [ecid: 0000JipTvEUFw00Fzzx0g01Go^Tz00000S,0] One or More configurations failed. Exiting
[2012-12-19T19:27:00.097-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 37] [ecid: 0000JipTvEUFw00Fzzx0g01Go^Tz00000S,0] Install Adapter: Mark End for:CONFIG
[2012-12-19T19:27:01.214-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 37] [ecid: 0000JipTvEUFw00Fzzx0g01Go^Tz00000S,0] Setting valueOf(IS CONFIGURATION SUCCESSFUL) to:true. Value obtained from:USER
[2012-12-19T23:50:35.901-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Setting valueOf(IS CONFIGURATION SUCCESSFUL) to:true. Value obtained from:USER
[2012-12-19T23:50:50.052-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Writing profile to file:/home/oracle/oraInventory/logs/installProfile2012-12-19_06-02-16PM.log
[2012-12-19T23:50:50.052-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] outputFile:/home/oracle/oraInventory/logs/installProfile2012-12-19_06-02-16PM.log
[2012-12-19T23:50:50.053-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] in writeProfile method..
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:INTERVIEW_TIME_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:COPY_TIME_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:LINK_TIME_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:CONFIGURATION_TIME_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:SESSION_INSTALL_TIME_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:OS_NAME_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:PROCESSOR_ARCHITECTURE_ID for writing.
[2012-12-19T23:50:50.081-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:CPU_SPEED_ID for writing.
[2012-12-19T23:50:50.082-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:CPU_NUMBER_ID for writing.
[2012-12-19T23:50:50.082-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:TOTAL_MEMORY_ID for writing.
[2012-12-19T23:50:50.082-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:AVAILABLE_MEMORY_ID for writing.
[2012-12-19T23:50:50.082-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:AVAILABLE_SWAP_SPACE_ID for writing.
[2012-12-19T23:50:50.082-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:PEAK_THREAD_COUNT_ID for writing.
[2012-12-19T23:50:50.088-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:OH_PATH_ID for writing.
[2012-12-19T23:50:50.088-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:INSTALL_MODE_ID for writing.
[2012-12-19T23:50:50.089-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:OH_SIZE_ID for writing.
[2012-12-19T23:50:50.089-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:SHIPHOME_PATH_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:CPU_SPEED_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:CPU_NUMBER_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:TOTAL_MEMORY_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:AVAILABLE_MEMORY_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:AVAILABLE_SWAP_SPACE_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:OS_NAME_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:INTERVIEW_TIME_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:INSTALL_TIME_ID for writing.
[2012-12-19T23:51:09.937-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 12] [ecid: 0000JipQ0x9Fw00Fzzx0g01Go^Tz000003,0] Adding Element:CONFIGURATION_TIME_ID for writing.
Any recommendations to fix this problem...
Regards.
JLK.
Edited by: JLK on Dec 20, 2012 9:34 AM -
Oracle fail safe中提示cannot move group
环境平台:
windows 2003 32 bit
oracle fail safe 3.3.3
两个主机加入windows cluster并安装了oracle fail safe
在oracle fail safe manager 中的一个cluster group点选 ‘move to a different node’
提示:the cluster group cannot be moved because is contains oracle service for mscs
觉得奇怪为什么不能move group呢,如果这样不就不能手动作fail over了。
只有在windows的 cluster管理器里面才能做move group的动作。
ps:不知道现在使用oracle fail saf的人是不是很少可能用windows的人都不多。
我查了资料,cluster group是不能在ofs里面管理的
http://docs.oracle.com/cd/E16161_01/doc.342/e14973/concepts.htm#i1008995 -
Oracle Enterprise Linux 6.1 Installation Fails during Disk Partitioning
Hi,
I've tried to install Oracle Enterprise Linux 6.1 by creating a Virtual Machine using Oracle VM Virtual Box in my laptop with Window XP host OS (NTFS filesystem), by following the below steps.
1) Installed Oracle VM Virtual Box
2) Created a new Virtual machine using a virtual box by specifying the two .iso images i.e OracleLinux-R6-U1-Server-i386-dvd.iso and boot.iso as the boot device and by specifying the following Disk files (.vdi) as follows.
2.1) Oracle_Enterprise_Linux_6_1_Root_Disk_1.vdi - For the / (i.e Root) partition - Dynamically expanded storage - 10 GB - ext4
2.2) Oracle_Enterprise_Linux_6_1_Swap_Disk_1.vdi - For the swap partition - Dynamically expanded storage - 10 GB - swap
2.3) Oracle_Enterprise_Linux_6_1_User_Disk_1.vdi - For the /usr partition - Dynamically expanded storage - 20 GB - ext4
2.4) Oracle_Enterprise_Linux_6_1_Home_Disk_1.vdi - For the /home partition - Dynamically expanded storage - 10 GB - ext4
But while installing OEL 6.1 after specifying the partitions, the installer get hung and throws an error as bug while creating the ext4 filesystem on /dev/sda1.
I tried to specify the default 8 GB for all the above four partitions, the installer successfully continues without any issues. But if i specify any partition more than 8 GB, it fails.
Is there anyway I can solve this problem by creating the above specified partitions with the above size ? Why does it fail if i specify any size more than 8 GB ?
Thanks
Harish8 GB is a common limit for systems were the boot loader or system BIOS imposes an addressable space limit for the boot partition. In such situations, the system boot partition has to fit within the first 8 GB physical boundary of the harddrive.
Your setup seems a bit unusual. Why do you create separate disks for each Linux partition?
Normally the Linux installer creates necessary partitions on the disk, including a /boot partition that is usually only 100 MB in size.
What are you doing with boot.iso? You should be able to start the system from the main installation DVD or .iso image. You might also want to install x86_64 Linux, unless your hardware is really very old and does not support the 64-bit extension. You can run 32-bit software on a n 64-bit OS, but not the other way around and you will limit your software to 32-bit only. -
Yast installation problem on Oracle Enterprise Linux Rel 5 Upd 2
Hi,
I installed Oracle Enterprise Linux Rel 5 Upd 2 on a new server (Intel 64 bit) with the downloads from oracle
(Enterprise-R5-U2-Server-x86_64-disc1.iso till Enterprise-R5-U2-Server-x86_64-disc6.iso).
Then I wanted to install Yast for administering my machine and downloaded yast_el5_x86_64.tar, again from Oracle. Running the Yast install routine it required the perl-Digest-SHA package. I downloaded that from Oracle ULN and installed it.
Now, running the Yast install routine again, I get a bunch of warnings and errors about failed dependencies and NOKEY's.
Here I copied a part of it:
warning: liby2util-2.13.8-0.12.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: blocxx-1.0.0-17.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libxcrypt-2.4-12.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: testutf8-1.0-1.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-core-2.13.39-0.3.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: hwinfo-13.57-2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-hardware-detection-2.13.7-0.9.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libzypp-2.15.10-0.4.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies
+ libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+ libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
warning: yast2-pkg-bindings-2.13.117-0.13.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ libzypp >= 2.4.0 is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
+ libzypp.so.215()(64bit) is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
warning: yast2-2.13.104-1.0.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ yast2-pkg-bindings >= 2.13.111 is needed by yast2-2.13.104-1.0.x86_64+
warning: yast2-network-2.13.98-0.7.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ yast2 >= 2.13.90 is needed by yast2-network-2.13.98-0.7.x86_64+
warning: perl-Parse-RecDescent-1.80-259.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-gettext-1.05-13.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-X500-DN-0.28-133.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-pam-2.13.5-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ yast2 is needed by yast2-pam-2.13.5-0.11.noarch+
warning: yast2-mail-aliases-2.13.8-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ libzypp.so.215()(64bit) is needed by yast2-perl-bindings-2.13.11-0.17.x86_64+
+ yast2 is needed by yast2-security-2.13.7-0.11.noarch+
+ yast2-pam is needed by yast2-security-2.13.7-0.11.noarch+
+ yast2 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+ yast2-network is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+ yast2-pam >= 2.13.5 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+ yast2 >= 2.13.70 is needed by yast2-country-2.13.52-0.9.x86_64+
+ yast2 >= 2.13.85 is needed by yast2-installation-2.13.192-0.4.noarch+
+ yast2-network is needed by yast2-installation-2.13.192-0.4.noarch+
+ yast2-pkg-bindings >= 2.13.101 is needed by yast2-installation-2.13.192-0.4.noarch+
+ yast2 is needed by yast2-users-2.13.55-0.4.x86_64+
+ yast2-pam is needed by yast2-users-2.13.55-0.4.x86_64+
What's wrong here and what is to do?
I only installed packages from Oracle on a newly installed machine. And I didn't find documentation regarding these problems.
Any help would be greatly appreciated,
Rogererror: Failed dependencies
+ libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+ libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+As error message clearly states you need to install additional OS packages (included in installation media or in online repository) to solve the dependencies. -
Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5
hello support,
i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 oracle localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
is this ok? what can I do to bring the database-installation to success?
Thank's for help ;-)
Edited by: user5782904 on 09.05.2010 14:06Here I paste you the configuration of my latest linux box which has a similar environment like yours.
# hostname
vmrhel6032.quist.ch
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032.quist.ch
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
# hostname
vmrhel6032
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Otherwise use the first example and don't forget to restart your server resp. the network service. ;) -
Oracle 11g installation on Oracle Enterprise Linux, 64bit version.
Hi
I want to install oracle 11g on Oracle Enterprise Linux, 64bit version.
Do I need to set kernel parameters in this operating system, since it is not standart Linux editions.
or
Can I have a step by step documentation for installing oracle 11g on this operating system?Hello,
Yes you do need to set kernal parameters in order to meet pre-requisites, otherwise your installation will fail and oracle might not work or unstable.
Here is the best place to find out stepwise installation instruction and kernel parameter configuration
Quick Installation Guide*
http://download.oracle.com/docs/cd/B28359_01/install.111/b32285/toc.htm
Kernel parameter configuration*
http://download.oracle.com/docs/cd/B28359_01/install.111/b32285/toc.htm#CEGFBCFD
You can use this tutorial to install oracle 11g*
http://www.oracle.com/technology/obe/11gr1_db/install/dbinst/dbinst.htm#o
Regards -
Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system
We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115 -
Oracle Application Server 10g R2 installation on Oracle Enterprise Linux 5
Hi there ...
I want to install Oracle Application Server 10g R2 on Oracle Enterprise Linux 5. Can I get an installation instructions (or steps) for that?
Oracle installation guide mentions Suse 9 & 8 and Red hat 3 & 2. There is nothing related to Oracle Enterprise Linux 5 or 4?
ThanksYes there is one for 10gR3 too:
Note:465159.1 Oracle Application Server 10g (10.1.3) Requirements for Linux OEL 5 and RHEL 5
Thanks
Shail -
Error during Oracle installation in Oracle Enterprise Linux
Hi All,
I was trying to install Oracle 10g in Oracle Enterprise Linux, and I'm getting the following error when I give the command *./runInstall*.
[oracle@localhost database]$ ./runInstaller -responseFile /home/oracle/database/response/enterprise1.rsp -nowelcome
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_12-58-11AM. Please wait ...[oracle@localhost database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
127.0.0.1:0.0
127.0.0.1:0.0
OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
I have tried to set the DISPLAY variable to my IP address, but it still gives the same issue.
Please find the logs for the same:
[oracle@localhost database]$ /sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:95:3B:4F
inet addr:192.168.64.128 Bcast:192.168.64.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe95:3b4f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:532694 errors:0 dropped:0 overruns:0 frame:0
TX packets:288167 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:792077163 (755.3 MiB) TX bytes:16147337 (15.3 MiB)
Interrupt:193 Base address:0x2024
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3280 errors:0 dropped:0 overruns:0 frame:0
TX packets:3280 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1739143 (1.6 MiB) TX bytes:1739143 (1.6 MiB)
[oracle@localhost database]$ export DISPLAY=192.168.64.128:0.0
[oracle@localhost database]$ echo $DISPLAY
192.168.64.128:0.0
Please suggest on what can be done as this is the last step for the Oracle installation which I'm unable to complete.
Let me know for any more details needed.
Thanks
Ravi
Ph: +919583750774Hi,
Thanks for the immediate response.
Now I'm getting the following error:
[oracle@scondw01 database]$ ./runInstaller -force -responseFile /u01/database/response/enterprise1.rsp -silent -nowelcome
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_09-10-03PM. Please wait ...[oracle@scondw01 database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
Unexpected Signal : 11 occurred at PC=0xB7C297CE
Function=(null)
Library=/tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.chgrp(Native Method)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.changeGroup(OiipgBootstrap.java:1206)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.writeInvLoc(OiipgBootstrap.java:900)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(OiipgBootstrap.java:408)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(OiicSessionInterfaceManager.java:400)
at oracle.sysman.oii.oiic.OiicSilentInterfaceManager.doInvSetupOperations(OiicSilentInterfaceManager.java:679)
at oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(OiicInvSetupWCCE.java:217)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:546)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:929)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Dynamic libraries:
08048000-08056000 r-xp 00000000 08:01 511751 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/bin/java
08056000-08059000 rwxp 0000d000 08:01 511751 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/bin/java
a4d43000-a4d4a000 r-xp 00000000 08:01 659354 /tmp/OraInstall2012-04-05_09-10-03PM/oui/lib/linux/liboraInstaller.so
a4d4a000-a4d4b000 rwxp 00006000 08:01 659354 /tmp/OraInstall2012-04-05_09-10-03PM/oui/lib/linux/liboraInstaller.so
a4d4b000-a4d88000 r-xs 00000000 08:01 659257 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/jewt4-nls.jar
a4d88000-a4f2f000 r-xs 00000000 08:01 659256 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/jewt4.jar
a4f2f000-a4f67000 r-xs 00000000 08:01 659275 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraPrereq.jar
a4f67000-a5085000 r-xs 00000000 08:01 659274 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/classes12.jar
a5085000-a508d000 r-xs 00000000 08:01 659272 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/swingaccess.jar
a508d000-a50da000 r-xs 00000000 08:01 659255 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3-nls.jar
a50da000-a50e0000 r-xs 00000000 08:01 659273 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3-swingaccess.jar
a50e0000-a5365000 r-xs 00000000 08:01 659254 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3.jar
a5365000-a538c000 r-xs 00000000 08:01 659259 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/help4-nls.jar
a538c000-a53f1000 r-xs 00000000 08:01 659258 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/help4.jar
a53f1000-a54a6000 r-xs 00000000 08:01 659271 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/oracle_ice.jar
a54a6000-a54c3000 r-xs 00000000 08:01 659269 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_zh_TW.jar
a54c3000-a54e0000 r-xs 00000000 08:01 659268 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_zh_CN.jar
a54e0000-a54fe000 r-xs 00000000 08:01 659267 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_pt_BR.jar
a54fe000-a551b000 r-xs 00000000 08:01 659266 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_ko.jar
a551b000-a5537000 r-xs 00000000 08:01 659265 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_ja.jar
a5537000-a5554000 r-xs 00000000 08:01 659264 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_it.jar
a5554000-a5571000 r-xs 00000000 08:01 659263 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_fr.jar
a5571000-a558e000 r-xs 00000000 08:01 659262 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_es.jar
a558e000-a55ad000 r-xs 00000000 08:01 659261 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_de.jar
a55ad000-a55c9000 r-xs 00000000 08:01 659260 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp.jar
a55c9000-a55ea000 r-xs 00000000 08:01 659270 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstImages.jar
a55ea000-a55f0000 r-xs 00000000 08:01 659345 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ojmisc.jar
a55f0000-a56ce000 r-xs 00000000 08:01 659342 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/emCfg.jar
a56ce000-a56e1000 r-xs 00000000 08:01 659344 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/orai18n-mapping.jar
a56e1000-a57e1000 r-xs 00000000 08:01 659343 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/orai18n-collation.jar
a57e1000-a5866000 r-xs 00000000 08:01 659341 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/xml.jar
a5866000-a5868000 r-xs 00000000 08:01 659349 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraInstallerNet.jar
a5868000-a5876000 r-xs 00000000 08:01 659350 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/share.jar
a5876000-a593d000 r-xs 00000000 08:01 659347 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/srvm.jar
a593d000-a5a65000 r-xs 00000000 08:01 659346 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/xmlparserv2.jar
a5a65000-a5a72000 r-xs 00000000 08:01 659351 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/oneclick.jar
a5a72000-a5e0f000 r-xs 00000000 08:01 659348 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraInstaller.jar
a5e0f000-a5e2b000 r-xs 00000000 08:01 642421 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/sunjce_provider.jar
a5e2b000-a5ee6000 r-xs 00000000 08:01 642420 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/localedata.jar
a5ee6000-a5ef3000 r-xs 00000000 08:01 642419 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/ldapsec.jar
a5ef3000-a5ef6000 r-xs 00000000 08:01 642418 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/dnsns.jar
a60fa000-a62fa000 r-xp 00000000 08:01 330503 /usr/lib/locale/locale-archive
b5bfb000-b618a000 r-xs 00000000 08:01 511764 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/charsets.jar
b618a000-b619b000 r-xs 00000000 08:01 511802 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/jce.jar
b619b000-b6274000 r-xs 00000000 08:01 511803 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/jsse.jar
b6274000-b628a000 r-xs 00000000 08:01 196225 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/sunrsasign.jar
b62d4000-b79c2000 r-xs 00000000 08:01 511810 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/rt.jar
b79c2000-b79d6000 r-xp 00000000 08:01 659151 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libzip.so
b79d6000-b79d9000 rwxp 00013000 08:01 659151 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libzip.so
b79d9000-b79f9000 r-xp 00000000 08:01 659136 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libjava.so
b79f9000-b79fb000 rwxp 0001f000 08:01 659136 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libjava.so
b79fb000-b7a0b000 r-xp 00000000 08:01 659150 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libverify.so
b7a0b000-b7a0d000 rwxp 0000f000 08:01 659150 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libverify.so
b7a0d000-b7a16000 r-xp 00000000 08:01 344676 /lib/libnss_files-2.3.4.so
b7a16000-b7a17000 r-xp 00008000 08:01 344676 /lib/libnss_files-2.3.4.so
b7a17000-b7a18000 rwxp 00009000 08:01 344676 /lib/libnss_files-2.3.4.so
b7a1f000-b7a23000 rwxs 00000000 08:01 249425 /tmp/hsperfdata_oracle/5761
b7a23000-b7a44000 r-xp 00000000 08:01 344698 /lib/tls/libm-2.3.4.so
b7a44000-b7a45000 r-xp 00020000 08:01 344698 /lib/tls/libm-2.3.4.so
b7a45000-b7a46000 rwxp 00021000 08:01 344698 /lib/tls/libm-2.3.4.so
b7a46000-b7a58000 r-xp 00000000 08:01 344660 /lib/libnsl-2.3.4.so
b7a58000-b7a59000 r-xp 00011000 08:01 344660 /lib/libnsl-2.3.4.so
b7a59000-b7a5a000 rwxp 00012000 08:01 344660 /lib/libnsl-2.3.4.so
b7a5e000-b7a66000 r-xp 00000000 08:01 659161 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
b7a66000-b7a67000 rwxp 00007000 08:01 659161 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
b7a67000-b7e6d000 r-xp 00000000 08:01 659159 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
b7e6d000-b7e88000 rwxp 00405000 08:01 659159 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
b7e9c000-b7fc1000 r-xp 00000000 08:01 344696 /lib/tls/libc-2.3.4.so
b7fc1000-b7fc3000 r-xp 00124000 08:01 344696 /lib/tls/libc-2.3.4.so
b7fc3000-b7fc5000 rwxp 00126000 08:01 344696 /lib/tls/libc-2.3.4.so
b7fc7000-b7fc9000 r-xp 00000000 08:01 344656 /lib/libdl-2.3.4.so
b7fc9000-b7fca000 r-xp 00001000 08:01 344656 /lib/libdl-2.3.4.so
b7fca000-b7fcb000 rwxp 00002000 08:01 344656 /lib/libdl-2.3.4.so
b7fcc000-b7fda000 r-xp 00000000 08:01 344700 /lib/tls/libpthread-2.3.4.so
b7fda000-b7fdb000 r-xp 0000d000 08:01 344700 /lib/tls/libpthread-2.3.4.so
b7fdb000-b7fdc000 rwxp 0000e000 08:01 344700 /lib/tls/libpthread-2.3.4.so
b7fe9000-b7ffe000 r-xp 00000000 08:01 344641 /lib/ld-2.3.4.so
b7ffe000-b7fff000 r-xp 00015000 08:01 344641 /lib/ld-2.3.4.so
b7fff000-b8000000 rwxp 00016000 08:01 344641 /lib/ld-2.3.4.so
Heap at VM Abort:
Heap
def new generation total 576K, used 387K [0xa6550000, 0xa65f0000, 0xa70d0000)
eden space 512K, 69% used [0xa6550000, 0xa65a8f48, 0xa65d0000)
from space 64K, 50% used [0xa65d0000, 0xa65d8080, 0xa65e0000)
to space 64K, 0% used [0xa65e0000, 0xa65e0000, 0xa65f0000)
tenured generation total 1408K, used 1090K [0xa70d0000, 0xa7230000, 0xafb50000)
the space 1408K, 77% used [0xa70d0000, 0xa71e0938, 0xa71e0a00, 0xa7230000)
compacting perm gen total 4864K, used 4693K [0xafb50000, 0xb0010000, 0xb3b50000)
the space 4864K, 96% used [0xafb50000, 0xaffe5698, 0xaffe5800, 0xb0010000)
Local Time = Thu Apr 5 21:10:05 2012
Elapsed Time = 0
# HotSpot Virtual Machine Error : 11
# Error ID : 4F530E43505002EF
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
# An error report file has been saved as hs_err_pid5761.log.
# Please refer to the file for further information.
Please let me know what can be the solution.
thanks
Ravikanth -
OWB 10.2.0.1 installation on Oracle Enterprise Linux
Hello Forum,
I am installing OWB 10.2.0.1 on Oracle Enterprise Linux.
While installation (creation of OWB reprository) i am getting following exception:
A spawned program error. Exception = java.io.IOException: java.io.IOException: ../unix/jvm.sh: cannot execute
oracle.wh.service.impl.assistant.ProcessEngine.processSPAWN(ProcessEngine.java:894): java.io.IOException: java.io.IOException: ../unix/jvm.sh: cannot execute
Does anyone has faced such issues.
Thanks in Advance.
Regards,
PraveenHi!
I want suggest you to investigate inside script '../unix/jvm.sh' searching for Java enviroment variables (it's possible that your enviroment is lacking of presence of some of them).
Good luck! -
Oracle Enterprise Linux Release 5 installation on DELL Studio 15
Hi All,
Please let me know if any done Oracle Enterprise Linux Release 4 or 5 version installation on Dell Studio 15 or any New laptop of any company.Planing to install oracle application on new laptop of any company.
Thank You Advance.
Bestregards,
Venkat.Hi Venkat,
No, Some of the laptops are not allowing to install linux.Not detecting the HDD and LAN drivers.This is an OS issue (NOT an Oracle E-Business Suite issue).
Regards,
Hussein -
Installation of OracleAS 10g on Red Hat Linux ES 3.0
Installation of Oracle AS 10g on RedHat ES 3.0
Red Hat Enterprise Linux 3
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1. Boot the server using the first CD.
o You may need to change your BIOS settings to allow booting from the CD.
2. The boot screen appears with the boot: prompt at the bottom of the screen.
o Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3. Language Selection
o Accept the default.
4. Keyboard Configuration
o Accept the default.
5. Welcome Screen
o Click on Next.
6. Mouse Configuration
o Accept the default.
7. Installation Type
o Select Custom.
8. Disk Partitioning Setup
o A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9. Boot Loader Configuration
o Accept the default.
10. Network Configuration
o It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o In the Hostname box, select manually and enter the hostname.
o In the Miscellaneous Settings box, enter the remaining network settings.
11. Firewall Configuration
o For the purposes of this walk-through, no firewall is configured. Select No firewall.
12. Additional Language Support
o Accept the default.
13. Time Zone Selection
o Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14. Set Root Password
o Enter a password for root, and enter it again to confirm.
15. Package Group Selection
o Select only the package sets shown here. Leave all others unselected.
o Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o Applications
- Editors
- Graphical Internet
o Servers
- Do not select anything in this group.
o Development
- Development Tools
o System
- Administration Tools
o Red Hat Enterprise Linux
- Do not select anything in this group.
o Miscellaneous
- Legacy Software Development
o Click on Next to proceed.
16. About to Install
o Click on Next.
17. Installing Packages
o Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18. Graphical Interface (X) Configuration
o Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19. Monitor Configuration
o Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20. Customize Graphical Configuration
o Accept the defaults.
21. Congratulations
o Remove the installation media from the system, and click on Next.
22. The system automatically reboots and presents a new welcome screen.
o Click on Next.
23. License Agreement
o Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24. Date and Time
o Set the Date and Time.
o If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25. User Account
o Create an account for yourself.
o Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26. Red Hat Network
o If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27. Additional CDs
o Click on Next.
28. Finish Setup
o Click on Next.
29. A graphical login screen appears.
30. Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc /usr/bin/gcc323
mv /usr/bin/g++ /usr/bin/g++323
ln âsf /usr/bin/gcc296 /usr/bin/gcc
ln âsf /usr/bin/g++296 /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora ⦠oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan Ali
@CES
[email protected]Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
oracleasmlib-1.0.0-1.i386.rpm \
oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant -
Guide to installing XE and Apex on Oracle Enterprise Linux 5.3 (64 bit)
I have just been through a time consuming and frustrating process of installing Oracle XE 10gR2 on Oracle Enterprise Linux 5.3 x86-64 and I want to share my experience so that others can benefit from it and overcome the same problems more quickly.
Prior to starting I had installed OEL 5.3 and been using it for a few days. The system I am using is a home built box with an AMD Phenom X4 955 Black Edition, 8 Gb RAM, Highpoint RR2680 RAID controller with 4 1TB disks in a RAID5 array and an additional 320Gb HDD storing the OS. I am using KDE3.5 on the desktop.
The main problem I encountered was with SELinux. As I eventually intend to have this system exposed on the Internet I was reluctant to switch it off despite having read extensively about the issues surrounding it and Oracle. I had several failed attempts at the installation process before succumbing to the reality that SELinux and Oracle are not happy bedfellows. I decided to switch SELinux to permissive mode having followed the advice here.
I found a very helpful guide to installing XE on Linux here as part of the installation of an application called Spacewalk. Note that you do not need to complete the whole Spacewalk installation, but just follow the instructions in the linked page.
Before you start you need to ensure that the UID of your oracle user is less than 500. Mine was 500, so I used the following commands to fix this:
usermod -u 250 oracle
find / -uid 500 -exec chown oracle {} \;
These change the oracle UID to 250 (but check that isn't already used first!) and the find command searches for all files that were owned by oracle (but weren't after the usermod cmd) and changes them back to oracle's ownership.
Now follow the Spacewalk instructions until you reach the Server Setup section. Before you do this you need to make a couple of changes to the script /etc/init.d/oracle-xe. I found these changes in various places, such as [link(1)|http://forums.oracle.com/forums/thread.jspa?messageID=1345771�] and [link(2)|http://dbataj.blogspot.com/2008/08/lblibrarypath-is-not-set-on-startup.html].
Note that in link(1) the oracle-xe-selinux packages installed have the same effect as the chcon command on the shared libraries so it isn't necessary to perform this step.
Open /etc/init.d/oracle-xe in vi (or your favourite editor) and do the following:
line 49: change /bin/su to /sbin/runuser
after line 52 (export PATH...) add the following lines:
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
There are further changes recommended to /etc/init.d/oracle-xe in [this post|http://forums.oracle.com/forums/thread.jspa?messageID=3201491�] but I haven't done them yet.
Having done the above changes you can now configure Oracle XE by running /etc/init.d/oracle-xe configure (as root!). As I have Apache Tomcat running on port 8080 I changed the default HTTP port to 8500 but kept the listener on its default port of 1521. Once the confuration script is done you will need to change the ports SELinux uses for Oracle as follows:
semanage port -d -t oracle_port_t -p tcp 9000 - deletes port 9000, which is the SELinux default port for Apex
semanage port -a -t oracle_port_t -p tcp 1521 - ensure that listener port is OK (assuming you used default of 1521, change accordingly if you didn't)
semanage port -a -t oracle_port_t -p tcp 8500 - add the new Apex HTTP port to SELinux
After all this running:
semanage port -l | grep oracle
should show you:
oracle_port_t tcp 1521, 8500
I ignored the TNSNAMES.ORA part of the Spacewalk instructions and proceeded with the 'Client setup on 64bit platform' and 'Configuring sqlplus' sections.
For the latter I created a bash script which I have made available in the oracle user and my own user's home directories:
cat > configure_oracle_10g_xe.sh
ORACLE_HOME=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server
PATH=$PATH:$ORACLE_HOME/bin
ORACLE_SID=XE
export ORACLE_HOME ORACLE_SID PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
I did this as I intend to install other Oracle databases, e.g. 11gR2, on this box later so I didn't want to put the above in .bashrc.
Having done the above you should be able to log into the database using sqlplus and the XE setup is complete.
The upgrade of Apex 2.2 to Apex 3.2.1 was fairly painless so I won't go into much detail about it - just follow the instructions provided by Oracle.
The only issue I had was right at the end of the process and is documented and answered in [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=958611&tstart=0].
That's it - I hope somebody will find this useful.On Oracle Metalink site, there are many documents which says that Oracle 32 bit software works on 32 bits OS and 64 bits software works on 64 bits OS. Official support is only in those combination....
So there is no good way to help you in your case-XE is 32 bit application with hard codded compiled libraries which most of them would not work on 64 bit OS.
Sorry
8(
Hope this helps
Maybe you are looking for
-
Send XML to Client: call-program cannot pass ampersand in parameter
In WLI Studio, I have tried to use the action "Send XML to Client" with following information: <call-program mode="async" name="IEXPLORE.EXE"> <actionid>1027425345078</actionid> <parm>http://pttserver:7001/pttWebApp/Test.jsp?First=a&Second=b&Third=c<
-
Sync of overdub tracks not to beat of bed tracks.
When I am overdubbing, the new track is out of sync/beat (late) to the bed tracks in playback mode yet was on time during recording. I have to shift/nudge the region back into sync/beat. Very annoying. I have been experimenting with the "recording
-
I made edits to my Photos app, such as deleting some photos and creating an album but the Photos app is not uploading the changes to icloud. At the bottom of Photos in the photos view it says last updated as this morning (3 hours ago) and I made the
-
Textbox line is appearing where it shouldn't be.
As soon as I updated firefox the line that tells you where what you typed will appear in a text box, will show up and sit there blinking. Anywhere, the backround, in other text, in links, in buttons. I have done a clean install of firefox twice with
-
How to integrate a new document in workflow ?
Hello, I have created a new Document in SAP B1. I want this document to be validated like quotation/order documents in the application. Is it possible to integrate it in the native SAP B1 workflow or how can I create a new workflow for this document