Installation of OWB

Hi All,
I am trying to install OWB into my personal computer. I have installed Oracle Database and OWB into separate Oracle homes.
The problem is - I am not able to access the originally installed Database instance through OWB Repository Assistant or the SQL Client provided by OWB.
Could you please let me know what might be prorblem ???
regards
-Arnab

I could not find the TNS_ADMIN in the registry editor in the location mentioned by you.
I had copied the tnsnames.ora also from the Oracle home to the OWB home but still if I give the user name and password and leave the host string blank it says TNS: Protocol Adapter Error and when in the host string if I write Oracle Service Name then it says Invalid Argument.
I would like mention that from the SQL client of the Oracle home I log in by specifying the user name and password and leave the host string as blank.
Any more hints as to what can be done for OWB access to my already installed Database instance in my PC???
Regards
-Arnab

Similar Messages

Installation of OWB Builder

Hi. I get error INS0001 during the installation of OWB Builder. I don't find the error description in the doc. Any idea ? Thank's in advance.

Can you give more details about you configuration (OWB and Database versions) as well as at which point in the installation does the error appear?
Regards:
Igor

Problem with the Installation of OWB 10g Release 2

Dear members
I am trying to install OWB and Create a Repsoitory on my machine as mentioned here http://www.oracle.com/technology/obe/10gr2_owb/owb10gr2_gs/owb/lesson1/start01.htm
But I am getting Warehouse builder Installation Error stating :
The Warehouse Builder Repository owner installation failed on REPOWNER
java.sql.SQLException:ORA-01919:role 'JAVAIDPRIV" does not exist.
INS0029:Error occured during installation
Check the log file C:\OraHome_2\owb\UnifiedRepos\log_090510_012311.000.log file for details
Can anyone point out as what could have gone wrong?
Also please refer to the following theard for additional info
http://forums.oracle.com/forums/thread.jspa?threadID=897240&tstart=0

Hi,
what db edition are you using (OWB cannot be installed into a Oracle XE)?
Is java properly installed?
Regards,
Carsten.

Installation of OWB 10.2.0.1 - check operating system version failed

Hi,
I'm trying to install OWB 10.2.0.1 on Windows 2008 server to use it as OWB client.
But I'm not able to continue with the installation due to following error:
Checking installer requirements....
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 FAILED
Any insight on this would be of great help.
Thanks,
Shaik.

Hi Sutirtha,
Executing the setup in cmd with -ignoreSysPrereqs option as well ending up with the error, in the next step itself.
It says, Abnormal program termination. An internal error occured.
Any suggestion on, which one of below OWB s/w is compatible with Windows 2008 Server R2, 64 bit OS.
---for Microsoft Windows 32-bit, 64-bit (AMD64 / EM64T)
---for Microsoft Windows (64-bit Itanium)
I'm trying this installation with "for Microsoft Windows 32-bit, 64-bit (AMD64 / EM64T) "
Thanks in Advance,
Shaik

Installation of OWB Repository on RAC fails at 77%

All,
We are trying to install OWB (Version 10.2.0.3.33 on AIX) Repository on RAC and installation fails on
77% completion - installation is performed on the AIX server.
this is where it fails
jvm.sh -classpath ../../lib/int/rtpplatform.jar:../../lib/int/rtpcommon.jar:../../../jdbc/lib/ojdbc14.jar:../../../lib/xmlparserv2.jar:../../../sqlj/lib/runtime12.jar:../../../jdk/jre/lib/rt.jar oracle.wh.runtime.platform.service.install.ServiceInstaller %host %port %serviceName %user %password
Java Exception:
[getConnection]....
after executing the output
[processSPAWN]: A spawned program error. Exception = java.lang.Exception: Error : java.sql.SQLException: ORA-29532: Java call terminated by uncaught Java exception: java.io.IOException
Get the error, stop processing other tokens...
java.lang.Exception: Error : java.sql.SQLException: ORA-29532: Java call terminated by uncaught Java exception: java.io.IOException
oracle.wh.service.impl.assistant.Monitor.waitForNotify(ProcessEngine.java:1489)
oracle.wh.service.impl.assistant.ProcessEngine.processSPAWN(ProcessEngine.java:878)
oracle.wh.service.impl.assistant.ProcessEngine.processFileTokens(ProcessEngine.java:583)
oracle.wh.service.impl.assistant.ProcessEngine.createOWBRepository(ProcessEngine.java:269)
oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition$4.runTask(AssistantWizardDefinition.java:531)
oracle.ewt.thread.TaskScheduler.runTask(Unknown Source)
oracle.ewt.thread.TaskScheduler.processTask(Unknown Source)
oracle.ewt.thread.TaskScheduler$TaskQueue.run(Unknown Source)
oracle.ewt.timer.Timer.doRun(Unknown Source)
oracle.ewt.timer.Timer.run(Unknown Source)
java.lang.Thread.run(Thread.java:568)
Exception = Exception occured in 'processSPAWN'. java.lang.Exception: Error : java.sql.SQLException: ORA-29532: Java call terminated by uncaught Java exception: java.io.IOException
[executeOwbReposOrRuntime_advanced]: Error occurred during installation. Exception =java.lang.Exception: Exception occured in 'processSPAWN'. java.lang.Exception: Error : java.sql.SQLException: ORA-29532: Java call terminated by uncaught Java exception: java.io.IOException
java.lang.Exception: Exception occured in 'processSPAWN'. java.lang.Exception: Error : java.sql.SQLException: ORA-29532: Java call terminated by uncaught Java exception: java.io.IOException
oracle.wh.service.impl.assistant.ProcessEngine.processSPAWN(ProcessEngine.java:898)
oracle.wh.service.impl.assistant.ProcessEngine.processFileTokens(ProcessEngine.java:583)
oracle.wh.service.impl.assistant.ProcessEngine.createOWBRepository(ProcessEngine.java:269)
oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition$4.runTask(AssistantWizardDefinition.java:531)
oracle.ewt.thread.TaskScheduler.runTask(Unknown Source)
oracle.ewt.thread.TaskScheduler.processTask(Unknown Source)
oracle.ewt.thread.TaskScheduler$TaskQueue.run(Unknown Source)
oracle.ewt.timer.Timer.doRun(Unknown Source)
oracle.ewt.timer.Timer.run(Unknown Source)
java.lang.Thread.run(Thread.java:568)
Our RAC Environment:
2 Nodes with an DB instance each:
Host and Instance 1: Instance Name=SPBINT1 - Service Names: SPBINT and OWB1_SPBINT
Host and Instance 2: Instance Name=SPBINT2 - Service Names: SPBINT and OWB2_SPBINT
1. When we try to install Repository using Service name OWB1_SPBINT - installation fails with above java exception.
2. If we try to install Repository using Service name SPBINT - installation is successful, but file
rtrepos.properties is created but with no content. We have tried to re-create the rtrepos.properties file
running sql script "reset_repository.sql" after manipulating table WB_RT_SERVICE_NODES setting service name
to OWB1_SPBINT. This fails with error message:
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: java.io.IOException
ORA-06512: at "XXOWB_REP.WB_RTI_UTIL", line 29
ORA-06512: at "XXOWB_REP.WB_RTI_UTIL", line 93
ORA-06512: at line 2
All help is apreciated.
Thanks
Bjorn-Erik

------ 2009/10/1 updated by Peter Hwang Sun 64 OWB 10201 patched to 10204
If you try to patch your OWB with 1020X and If you are running OWB in two-tier environment (OWB control center running seperately from DB server), you may want to check wb_rt_service_nodes table for its record.
select * from wb_rt_service_nodes;
NODE_ID INSTANCE_NUMBER HOST PORT SERVICE_NA ENABLED RUNTIME_VERSION SERVER_SIDE_HOME
1 1 SunDB01 1521 test 1
In our environment, last two fields need to be NULL.
During 10204 OWB patch (app server binary), the process updated record and popylated 'RUNTIME_VERSION" with "Generated" and "SERVER_SIDE_HOME" with "/apps/owb" (OWB application server side Home).
Once remove the aboe two, out OWB control center is running fine.
------ 2009/10/1 updated by Peter Hwang Sun 64 OWB 10201 patched to 10204

Oracle 11g installation with OWB component

Hi,
I want install oracle 11g (11.2.0.3) software without installing the OWB component.
Could someone please help me. How to select the indiviual components while installing 11g.
Thanks in advance.

Hi,
Use chopt tool .
<<http://docs.oracle.com/cd/E11882_01/install.112/e24321/post_inst_task.htm#CHDFEIJF>>
As you may know, Oracle Universal Installer no longer provides the custom installation option of individual components.
<<http://docs.oracle.com/cd/E11882_01/install.112/e24321/whatsnew.htm#BGGBHDFG>>
Regards,

Installation of OWB 10g R2

We would like to install OWB 10g R2 . We have database 10g on Unix AIX HP machine(server).
We like install it in client server architecture though i have gone through some installation guide
I want some clarification about OWB installation in client server fashion..
1)what are components to be installed on the Server.
2) What are components to be installed on the client.
3)What extra configuration i should do on server end.

1.First create Repository using Repository assistance.
while creating repository
it will ask you for Repository user and Repository OWNER.
You can create multiple user under One OWner.
After that connect To owb using the one of the user.
Hope it will solve your problem.

Error during the installation of OWB 10g: ins_plsql.mk

Hello,
When trying to install OWB10g for Linux, the error to proceed is presented:
"Error in invoking 'install' of makefile '/oracle/OWB10g/plsql/lib/ins_plsql.mk'."
The DB is 9.2.0.5 and the SO is Red Hat Enterprise Linux 3.
Trankful for the attenction.
Marcos Freitas

Marcos,
We have seen these makefile errors on Solaris if ORACLE_HOME is not set to OWB before start of OUI install.
If OWB is installing to /home/owb, ORACLE_HOME needs to point to /home/owb even if the dir does not exist before the start of Install.
Can you please try that?
Thanks,
Mark.

Installation of OWB Repository hungs after 88%

Hello,
I am trying to create an OWB Repository via the repository assistant with OWB 10g R2 (latest version). The database is an Oracle 10.2.0.2 on Windows Server 2003.
It works well until 88% where the screen just disappear. In the log file I do not see any error. It stops a few line after having called the script ../../rtasst/wb_rt_seed_service_nodes.sql.
Does anyone had the same problem?
Many thanks in advance,
Dominique Wiesmann

Thank you for the advice. I knew about the nls_territory setting problem and therefore set it to America right from the beginning. So it must be something else, but no idea what. I will open a tar. Do you still have the problem ? If you find the solution, thank you for telling me.
Best regards, Dominique

Getting error while OWB installation

Hi,
I'm getting following error while installation of OWB 10.2 on LINUX x86-64.However i'm not able to find out the reason for it.Even in the log mentioned in this error doesnt says much.Does anybody has encountered this problem or knows the cause of it.
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'isqlldr' of makefile '/dborafiles/OWB/orabase/product/10.2.0/rdbms/lib/ins_rdbms.mk'. See '/dboracle/orabase/oraInventory/logs/installActions2009-11-19_09-37-44PM.log' for details.
Exception Severity: 1
Thanks

According to document ID 734800.1 on Oracle support:-
Cause
The following Environment variables were set to the previously defined oracle home.
SHLIB_PATH
LD_LIBRARY_PATH
Hence OUI tried to pickup the files from previously defined Oracle Home in the linking phase of installation of the 10.2
Solution
Log on as oracle owner
Unset the following environment variables.
SHLIB_PATH
LD_LIBRARY_PATH
Then Install again

OWB 10g Release 2 from 32 bit to 64 bit on Linux

Hi guys,
I have a client who is planning to migrate their Linux server from 32 bit to 64 bit and migrate their Oracle database from 10.2.0.3 from 32 bit server to 10.2.0.3 from 64 bit server.
We have OWB 10g Release 2 (10.2.0.3) installed in the 32 bit server.
Our DBA is planning to move the entire database to the new server including the OWB repositories.
My question is,
Will the following work?
1. Install the OWB 10g Release 2 (10.2.0.3 or 10.2.0.4) 64 bit in the new 64 bit Linux 64 bit server
2. Remove all the OWB repository user schemas & roles from the database where OWB is installed
3. Install the OWB repository in the new 64 bit server
4. Import the .mdl backup of the project from existing OWB 32 bit to the new OWB 64 bit server
5. Configure the project with the new server
OR
Since our DBA is planning to move the entire database to the new server including the OWB repositories
1. Install the OWB 10g Release 2 (10.2.0.3) 64 bit in the new 64 bit Linux 64 bit server
Will I be able to access my repository that is migrated from the 32 bit server (avoiding the installation of OWB repository and importing the project and configuring the whole project in the new server) ?
Please someone shed some light on this. Your help is appreciated
Thanks in advance....
Edited by: user528846 on Feb 11, 2010 11:59 AM
Edited by: user528846 on Feb 11, 2010 11:59 AM

Does this mean, ... we have to install the OWB 64 bit and install a new repository in the 64 bit server?In my opinion you don't need to create new repository.
After migrating database to 64bit perform steps from Metalink note 434272.1 "How To Update Warehouse Builder 10.2 After A Database Cloning".
It is better to save the same path for new OWB 64bit software. If you install OWB into different path you need to update OWBRTPS table with new path to OWB software (look at metalink note 550271.1).
Regards,
Oleg

OWB 904 doesn't use DB Links in mapping scripts

I'm having trouble deploying mappings because they don't use the generated DB Links in the mapping scripts.
Normally when deploying a mapping I get this warning that certainly is correct since it can't find the source table:
VLD-2771: System privileges may not allow extraction from source ZIPCODE.
Extract from the mapping script:
CURSOR "ZIPCODE_c" IS
SELECT
"ZIPCODE_DWH"."ZIPCODE" "ZIPCODE",
"ZIPCODE_DWH"."CITY" "CITY",
ROWNUM "ROWNUM_ALIAS$$$"
FROM "AXAPTA"."ZIPCODE" "ZIPCODE_DWH" ;
Only when explicitly typing the name of the DB link in the configure options of the mapping will it work. But when I do this I get the following warning:
VLD-1124: Schema and/or Database link physical configuration parameters should not be set for ZIPCODE.
The version of the code that works:
CURSOR "ZIPCODE_c" IS
SELECT
/*+ NO_MERGE */
"ZIPCODE_dwh.business8123"."ZIPCODE" "ZIPCODE",
"ZIPCODE_dwh.business8123"."CITY" "CITY",
ROWNUM "ROWNUM_ALIAS$$$"
FROM "ZIPCODE"@"dwh.business.auc.dk@dwh" "ZIPCODE_dwh.business8123" ;
Shouldn't the mapping script use the DB Link normally or is there an option I have missed? I see in the Reviewers Guide that the target user is granted access to the source (through Public) but won't this only work if both source and target is in the same database?
Regards
Bent

Hi guys,
I am facing a strange problem. The code generated for my mapping has NOT used the dblinks. My OWB version is 10.1.0.4
This is my problem in brief.
I have installed OWB newly and started to do a sample task. I created a very simple one to one table population mapping from source to the target schema. Both are in the same database.
When i generated the code for the mapping, it gave a warning 'VLD-2771: System privileges may not allow extraction from source EMP'.
When i checked the code which was generated, i couldnot see any dblinks associated with my source table( which seems strange)
CURSOR "INGRP_c" IS
SELECT
"EMP_SRC_TRG_CONN"."EMPNO" "EMPNO",
"EMP_SRC_TRG_CONN"."ENAME" "ENAME",
"EMP_SRC_TRG_CONN"."JOB" "JOB",
"EMP_SRC_TRG_CONN"."MGR" "MGR",
"EMP_SRC_TRG_CONN"."HIREDATE" "HIREDATE",
"EMP_SRC_TRG_CONN"."SAL" "SAL",
"EMP_SRC_TRG_CONN"."COMM" "COMM",
"DEPT_SRC_TRG_CONN"."DEPTNO" "DEPTNO_1",
"DEPT_SRC_TRG_CONN"."DNAME" "DNAME",
"EMP_SRC_TRG_CONN"."DEPTNO" "DEPTNO",
"DEPT_SRC_TRG_CONN"."LOC" "LOC"
FROM "SCOTT"."EMP" "EMP_SRC_TRG_CONN" ;
In brief this is the process i have done.
Source schema : SCOTT & Target schema : TRG_SCHEMA
1) I have created source (for SCOTT) and target(for TRG_SCHEMA) modules.
2) I have also created DBLinks, Locations and Connector from source to the target locations.
3) I registered both the source location and target locations.
4) Validated, Generated and Deployed the Connector from source to the target.
I was unable to trace the error. Did i miss anything in the configuration? or during the installation of OWB.
Though it is a very old post, i hope someone can help me out here.
Thanks in Advance,
Sri

OWB 10.2.0.1.31: Not be able to view reports on Repository Browser

Hello,
I not be able to show the list of execution mappings into owb repository browser. I get access to login page and i get access with runtime repository owner user, but repository browser don´t show the mapping execution list into execution report page.
In other installation od OWB the execution mapping's report showed correctly. I try to install into clean computer and not be able to get the result of execution mapping.
Any idea??
Jaaquin

I have exactly the same problem. Repository browser is working, I can see deployment reports. The execution reports are working but emtpy. Although the control center manager shows execution logs.
The problem appeared after I installed the last patch Warehouse Builder 10.2.0.4 Patch. Everything else seems to work normally.
The client version is 10.2.0.4.36
The repository version is 10.2.0.4.0
Can it be the difference between the repository and OWB browser versions?
Thanks,
Kaur

Executing a mapping from sqlplus in OWB 904

I have used the below syntax to execute OWB 902 mappings as below:
sqlplus / <<*sql*
Execute MAP_SOMETHING.MAIN();
sql
I deployed the same mapping with new version of OWB 904.. it did not work. What is new syntax to execute the mapping from sqlplus?

From OWB 9.0.4 on, you must use the execution template to execute your mappings from sql. The template file, that has a brief doc section in its heading is:
<OWB installation directory>/owb/rtp/sql/sqlplus_exec_template.sql
Regards:
Igor

WorkFlow OWB Jobs

Is there a way to run the Workflow jobs independent of Oracle clients (OWB and OEM)? We currently have OWB client for windows installed on our machine and cannot use windows to run our jobs in our production environment. Is there a way to run OWB jobs in unix?

Hi,
Assuming the 3 users/schemas after the OWB installations are owb,owbuser,owbrun(runtime)
Login with Owbuser ID/pwd to Unix sqlplus
then execute the following line (all in one line)
@/build/owb92/owb/rtp/sql/oem_exec_template.sql owbrun CDS_TXN_LOAD_PROCESS_FLOW_LOC PROCESS CDS_TXN_LOAD_PROCESS_FLOW_01 "," ","
where
@/build/owb92/owb/rtp/sql/oem_exec_template.sql - complete path of oem_exec_template.sql file
CDS_TXN_LOAD_PROCESS_FLOW_LOC - process flow location
CDS_TXN_LOAD_PROCESS_FLOW_01 - process flow name
PROCESS - keyword to run workflow process
Cheers
Ranjeesh

Installation of OWB

Similar Messages

Maybe you are looking for