Installation of PCM 11.1
We have been a 2-4 seat user of Primavera Expedition/Professional/CM since Expedition v3.0 in 1990 and, due to the economy, have not had use for it over the past couple years. We have recently been awarded a small municipal project and would like to put PCM 11.1 back to use on our original, separate old but believed to be fully functional, web / database servers running windows 2000, with intentions to upgrade with an improved economy.
Having to install from scratch, aftrer installing Sybase ASA on the Database server along with Infomaker 10.5 we then performed the Web server installation as identified in installation manuals. Upon completion we received the WARNING "The PopulateGroups Utility Failed. Rerun this utility after setup is finished."
After spending the last several days trying to locate information on the warning and trying different installation sequences without success, is there anyone out there (old Primavera Support Personnel, IT or otherwise) that can help walk us thru the installation, fill in the blanks or have some suggestions. Installation Manuals were never much help but, back in the day, the Primavera Support made up for that.
Both servers running windows 2000 sp4, IE6 (no changes since last used for EXPPro three years ago except programs were removed).
Our last support came from Primavera and are in no position to pay the unreasonable fees Oracle required to get what would amount to merely advice on software and hardware upgrades, which will require further time and money, before getting back to operational.
Please post response or send email to [email protected]
Thank you in advance.
Are the database server and the web/app server on the same machine?
This message could mean that the webserver can't make a connection to the database server. Make sure that you can connect to the database via an odbc connection from the webserver.
If that connects, try delelting the rows in the GROUP_INFO table in the EXPADMIN database. The POPULATEGROUPS utility creates records in that table and there was an issue with that utility not updating records. Deleting the records and rerunning POPULATEGROUPS used to resolve the problem
Similar Messages
-
Can a FICO consultant setup PCM?
Dear all PCM experts,
I am a new FICO consultant and our PM from a BW team seeking for a FICO consultant to help out in his PCM project.
I have never heard of PCM.
And I found that setting up PCM is not same as setting up FICO (SPRO) although some CO concepts might be needed. (correct me if I am wrong)
My questions:
1. How significant is the role of FICO consultant in setting up PCM? What should he knows or do in the project? Or is it just perform data mapping and producing Functional Specs for reports? (sorry i do not have much info on the role yet because the PM himself is not familiar with PCM)
2. What is the prospect of PCM skills for a FICO consultant?
Thank you.
Best Rgds,
SebastianHi Sebastian,
As per my idea, installation of PCM can be done by Basis consultants. Function people should perform the profitability and cost estimations by using the pre defined tasks in PCM.
Regards,
Amar. -
EPMSystem inventory does not get updated
Hi,
I am in a weird situation where I have installed and configured Foundation Services, Calc Manager, EAS Server, EIS, ESS on a linux server. On same server I had APS and PCM components to be installed that were pending. Now that I have installed PCM and APS through the usual method of using installTool.sh and then configTool.sh to configure. Everything works fine and seems to be healthy superficially.
HSS and WS Patch were applied soon after config but before installation of PCM & APS -HSS 300 Patch 14020629 , WS 300 Patch 13936087 along with PCM pre-req that is 14521719.
EPM 11.1.2.2
This is my current inventory:
bash-3.2$ ./opatch lsinventory
Oracle Interim Patch Installer version 11.1.0.9.0
Copyright (c) 2011, Oracle Corporation. All rights reserved.
Oracle Home : /sid/hyperion/EPMSystem11R1
Central Inventory : /sid/hyperion/oraInventory
from : /sid/hyperion/EPMSystem11R1/oraInst.loc
OPatch version : 11.1.0.9.0
OUI version : 11.1.0.9.0
OUI location : /sid/hyperion/EPMSystem11R1/oui
Log file location : /sid/hyperion/EPMSystem11R1/cfgtoollogs/opatch/opatch2013-07-11_02-42-33AM_1.log
Patch history file: /sid/hyperion/EPMSystem11R1/cfgtoollogs/opatch/opatch_history.txt
OPatch detects the Middleware Home as "/sid/hyperion"
Lsinventory Output file location : /sid/hyperion/EPMSystem11R1/cfgtoollogs/opatch/lsinv/lsinventory2013-07-11_02-42-33AM.txt
Installed Top-level Products (1):
Oracle EPM System 11.1.2.2.0
There are 1 products installed in this Oracle Home.
Interim patches (3) :
Patch 14521719 : applied on Wed Jul 10 08:14:08 BST 2013
Unique Patch ID: 15515534
Created on 17 Sep 2012, 16:11:09 hrs PST8PDT
Bugs fixed:
14617557, 14495315, 14511060
This patch overlays patches:
14020629
This patch needs patches:
14020629
as prerequisites
Patch 13936087 : applied on Wed Jul 10 07:30:46 BST 2013
Unique Patch ID: 15346216
Created on 2 Aug 2012, 09:03:38 hrs PST8PDT
Bugs fixed:
13728777, 14027467, 13801022, 13800122, 13805926, 13920444, 13944867
13789182, 13740181, 13806136, 13683135, 13683154, 13908628, 13861087
13722049, 13687804, 13836773, 13813782, 13844144, 13683019, 13768325
13820579, 13836656, 13970515, 13900121, 13813817, 13822715, 13775224, 13799612
Patch 14020629 : applied on Wed Jul 10 07:27:38 BST 2013
Unique Patch ID: 15357087
Created on 06 Aug 2012, 20:32:09 hrs
Bugs fixed:
13807334, 13807337, 13850286, 13979018, 14154785, 13803650, 13808793
11714345, 13850711, 14409311
But on applying APS or PCM patch (Note: it was installed later) . It throws OPatch 39 error. That is the component is not found.
bash-3.2$ ./opatch apply HPCM_11_1_2_2_352_16565651 -oh /sid/hyperion/EPMSystem11R1/ -jre /sid/hyperion/jdk160_29/
Oracle Interim Patch Installer version 11.1.0.9.0
Copyright (c) 2011, Oracle Corporation. All rights reserved.
Oracle Home : /sid/hyperion/EPMSystem11R1
Central Inventory : /sid/hyperion/oraInventory
from : /sid/hyperion/EPMSystem11R1//oraInst.loc
OPatch version : 11.1.0.9.0
OUI version : 11.1.0.9.0
OUI location : /sid/hyperion/EPMSystem11R1//oui
Log file location : /sid/hyperion/EPMSystem11R1/cfgtoollogs/opatch/16565651_Jul_10_2013_09_37_21/apply2013-07-10_09-37-21AM_1.log
Patch history file: /sid/hyperion/EPMSystem11R1/cfgtoollogs/opatch/opatch_history.txt
OPatch detects the Middleware Home as "/sid/hyperion"
OPatch will do the following:
[Oracle Home discovery] : Configure and Validate Oracle Home info.
[Prerequisite for apply] : Invoke prerequisites to see if patch can be applied.
[Patch conflict detection for apply patch] : Check if any conflict with already installed patches in Oracle Home.
ApplySession applying interim patch '16565651' to OH '/sid/hyperion/EPMSystem11R1'
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 16565651: Required component(s) missing : [ oracle.epmsystem.profitability, 11.1.2.2.0 ]
[ Error during Prerequisite for apply Phase]. Detail: OPatch failed during prerequisite checks:
Prerequisite check "CheckApplicable" failed.
System is intact, OPatch will not restore the system
Recommended actions : This patch requires some components to be installed in the home. Either the Oracle Home doesn't have the components or this patch is not suitable for this Oracle Home
How do I get out of this situation. Do we have any script or tool that can update the components? I have faced this issue multiple times I have alternative solution to this but it is ruining my inventory and washes out all the patches that were applied from the system. It might just be inventory corruption .
NOTE: Everything goes smooth if we install all the components in one go. Installing it at different time does not update the inventory I believe.
Note able to figure out this behaviour.
Thanks in advance.
Regards
AnjumHi,
According to BOM Components, I m making the process order and my GR is automatically created and i cant change the GR even.
And that By product is automatically received by movement type 531. Whenever i m seeing the GR, in DOC info Tab Page, the system shows the msg that Financial Document could not be generated.
What should i do?
Regards,
Jigar -
PCM installation on MS SQL 2008 R2
Hi Experts,
I am installating PCM 7.5 on MS SQL 2008 R2, but it gives me an error, the message is "Failed to connect to the Primary Server. The following error occurred: 80880007 Incorrect Database Version".
Is there a new installation which works for R2 version?
Thanks in advance.
Regards,
YH SeoThe error you are receiving is usually raised because of an incorrect database script. Did you check the output log file when you ran the script? SAP Note [1203230|http://service.sap.com/sap/support/notes/1203230] mentions this error message and how to check which script has been run in the database.
The Product Availability Matrix ([PAM|http://service.sap.com/~form/handler?_APP=00200682500000001303&_EVENT=DISP_NEW&00200682500000002804=01200314690900001423]) for PCM 7.5 provides information on compatability between OS and DB. Also SAP Note [1562900|http://service.sap.com/sap/support/notes/1562900] indicates MS SQL 2008 R2 is supported with PCM 7.5 SP12. If you have further issues, please create a customer [message|http://service.sap.com/message] on the SAP Service Marketplace.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team -
Hello Team,
Am installing SAP Business Objects Profit Cost Management 7.5 Sandbox Installation on a stand alone windows 2008 server with SQL 2008 DB.
And I opted for a primary server installation and am done with 70 % of the installation but am stuck at this stage where it asksfor the "Work Manager Options" screen, its asking to enter an Administrator user name and password in the UserName and Password text boxes.
I have no idea regd Work Manager Options, can someone guide me as am following only the install guide which is really not pretty clear.This question is old, but fot those looking for a resolution, the buil-in user anda password are:
user:Administrator
Password:administrator
Hope it helps in the future! -
PCM 7.0 installation and configuration error
Dear experts,
I installed PCM 7.0 and while configuration I got the error: Failed to connect to the Primary Server. The following error occured: 80880007 Incorrect Database Version.
I did a check on the database and it is SQL Server 2009 SP2 (version 9.00.3077.00 SP2). Please help me in resolving this error.
Thanks,
VivekPlease see SAP note [1203230|http://service.sap.com/sap/support/notes/1203230] EPM Error: "Failed to connect to EPM Server 80880007 Incorrect database version.
SQL2005 is supported for PCM 7.0.
See the [System Requirements|http://help.sap.com/businessobject/product_guides/bopcm7/en/profitability_and_cost_management_sys_requirements_en.pdf] guide.
Best regards,
[Jeffrey Holdeman|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/jeffrey+holdeman]
SAP BusinessObjects
Enterprise Performance Management
Regional Implementation Group -
Deploy java components error in NW7.4 installation
Hi Experts,
I am installing NW 7.4, i have done all the pre-installation steps but i am getting error at deploy java components.
please find the log. please help me in this it is very urgent. I need your experience.
An error occurred while processing option SAP NetWeaver 7.4 Support Release 2 > MaxDB > SAP Systems > Optional Standalone Units > Process Orchestration > Standard System > Process Integration and Orchestration Package( Last error reported by the step: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW740SR2\ADA\INSTALL\STANDALONE\STD\PICP\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW740SR2/ADA/INSTALL/STANDALONE/STD/PICP/install/lib;\\PO/sapmnt/POP/SYS/global/security/lib/tools/iaik_jce.jar;\\PO/sapmnt/POP/SYS/global/security/lib/tools/iaik_jsse.jar;\\PO/sapmnt/POP/SYS/global/security/lib/tools/iaik_smime.jar;\\PO/sapmnt/POP/SYS/global/security/lib/tools/iaik_ssl.jar;\\PO/sapmnt/POP/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/POP/J00/j2ee/j2eeclient/sap.com~tc~exception~impl.jar;D:/usr/sap/POP/J00/j2ee/j2eeclient/sap.com~tc~je~clientlib~impl.jar;D:/usr/sap/POP/J00/j2ee/j2eeclient/sap.com~tc~logging~java~impl.jar;C:/Program Files/sapinst_instdir/NW740SR2/ADA/INSTALL/STANDALONE/STD/PICP/install/lib/tc~je~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner deploy -l "C:\Program Files\sapinst_instdir\NW740SR2\ADA\INSTALL\STANDALONE\STD\PICP\deploy.lst" -e stop -u lower -w safety --lcm bulk -t 14400000 --host PO --port 50004' aborts with return code 104. Error message is 'Component:BI_UDI ( sap.com) Status:Aborted Description:. SOLUTION: Check 'C:\Program Files\sapinst_instdir\NW740SR2\ADA\INSTALL\STANDALONE\STD\PICP\log\dc_log\deploy_api.0.log' and 'deploycontroller.log' for more information.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue later.
Log files are written to C:\Program Files/sapinst_instdir/NW740SR2/ADA/INSTALL/STANDALONE/STD/PICP.
Regards,
Patan Thavaheer.Hi manu,
Please find the error log.
[ Error ] Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:416)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:338)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:164)
at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:79)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:315)
... 14 more
Caused by: com.sap.engine.services.rmi_p4.P4IOException: No alive connection. Check state of the server
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:828)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:813)
at com.sap.engine.services.rmi_p4.ClientConnection.sendRequest(ClientConnection.java:362)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:123)
at com.sap.engine.services.rmi_p4.RemoteBroker.resolveInitialReference(RemoteBroker.java:41)
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:153)
... 16 more
[ Error ] Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
[ Info ] +++ Wait for server response +++. Deploying offline [31] seconds. Will timeout in [14,368] seconds.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:416)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:338)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:164)
at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:79)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:315)
... 14 more
Caused by: com.sap.engine.services.rmi_p4.P4IOException: No alive connection. Check state of the server
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:828)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:813)
at com.sap.engine.services.rmi_p4.ClientConnection.sendRequest(ClientConnection.java:362)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:123)
at com.sap.engine.services.rmi_p4.RemoteBroker.resolveInitialReference(RemoteBroker.java:41)
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:153)
... 16 more
[ Error ] Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:416)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:338)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:164)
at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:79)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:315)
... 14 more
Caused by: com.sap.engine.services.rmi_p4.P4IOException: No alive connection. Check state of the server
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:828)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:813)
at com.sap.engine.services.rmi_p4.ClientConnection.sendRequest(ClientConnection.java:362)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:123)
at com.sap.engine.services.rmi_p4.RemoteBroker.resolveInitialReference(RemoteBroker.java:41)
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:153)
... 16 more
[ Error ] Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:416)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:338)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:164)
at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:79)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:315)
... 14 more
Caused by: com.sap.engine.services.rmi_p4.P4IOException: No alive connection. Check state of the server
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:828)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:813)
at com.sap.engine.services.rmi_p4.ClientConnection.sendRequest(ClientConnection.java:362)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:123)
at com.sap.engine.services.rmi_p4.RemoteBroker.resolveInitialReference(RemoteBroker.java:41)
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:153)
... 16 more
[ Error ] Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:416)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:338)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:164)
at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:79)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:315)
... 14 more
Caused by: com.sap.engine.services.rmi_p4.P4IOException: No alive connection. Check state of the server
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:828)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:813)
at com.sap.engine.services.rmi_p4.ClientConnection.sendRequest(ClientConnection.java:362)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:123)
at com.sap.engine.services.rmi_p4.RemoteBroker.resolveInitialReference(RemoteBroker.java:41)
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:153)
... 16 more
[ Error ] Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:416)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:338)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:164)
at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:79)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:315)
... 14 more
Caused by: com.sap.engine.services.rmi_p4.P4IOException: No alive connection. Check state of the server
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:828)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:813)
at com.sap.engine.services.rmi_p4.ClientConnection.sendRequest(ClientConnection.java:362)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:123)
at com.sap.engine.services.rmi_p4.RemoteBroker.resolveInitialReference(RemoteBroker.java:41)
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:153)
... 16 more
[ Error ] Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [PO:50004]. End of stream is reached unexpectedly during input from Socket[addr=/192.168.2.87,port=50004,localport=50597]. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:416)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:338)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:164)
at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:79)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:315)
... 14 more
Caused by: java.io.EOFException: End of stream is reached unexpectedly during input from Socket[addr=/192.168.2.87,port=50004,localport=50597]
at com.sap.engine.services.rmi_p4.ClientConnection.run(ClientConnection.java:501)
at java.lang.Thread.run(Thread.java:763)
[ Error ] Could not establish connection to AS Java on [PO:50004]. End of stream is reached unexpectedly during input from Socket[addr=/192.168.2.87,port=50004,localport=50597]. Check if the host and port specified are correct and AS Java is up and running.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:416)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:338)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:164)
at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:79)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:315)
... 14 more
Caused by: com.sap.engine.services.rmi_p4.P4IOException: No alive connection. Check state of the server
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:828)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:813)
at com.sap.engine.services.rmi_p4.ClientConnection.sendRequest(ClientConnection.java:362)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:123)
at com.sap.engine.services.rmi_p4.RemoteBroker.resolveInitialReference(RemoteBroker.java:41)
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:153)
... 16 more
[ Error ] Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:416)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:338)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:164)
at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:79)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:315)
... 14 more
Caused by: com.sap.engine.services.rmi_p4.P4IOException: No alive connection. Check state of the server
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:828)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:813)
at com.sap.engine.services.rmi_p4.ClientConnection.sendRequest(ClientConnection.java:362)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:123)
at com.sap.engine.services.rmi_p4.RemoteBroker.resolveInitialReference(RemoteBroker.java:41)
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:153)
... 16 more
[ Error ] Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
[ Info ] +++ Wait for server response +++. Deploying offline [48] seconds. Will timeout in [14,351] seconds.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:416)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:338)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:164)
at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:79)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:315)
... 14 more
Caused by: com.sap.engine.services.rmi_p4.P4IOException: No alive connection. Check state of the server
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:828)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:813)
at com.sap.engine.services.rmi_p4.ClientConnection.sendRequest(ClientConnection.java:362)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:123)
at com.sap.engine.services.rmi_p4.RemoteBroker.resolveInitialReference(RemoteBroker.java:41)
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:153)
... 16 more
[ Error ] Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [PO:50004]. End of stream is reached unexpectedly during input from Socket[addr=/192.168.2.87,port=50004,localport=50615]. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:416)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:338)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:164)
at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:79)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:315)
... 14 more
Caused by: java.io.EOFException: End of stream is reached unexpectedly during input from Socket[addr=/192.168.2.87,port=50004,localport=50615]
at com.sap.engine.services.rmi_p4.ClientConnection.run(ClientConnection.java:501)
at java.lang.Thread.run(Thread.java:763)
[ Error ] Could not establish connection to AS Java on [PO:50004]. End of stream is reached unexpectedly during input from Socket[addr=/192.168.2.87,port=50004,localport=50615]. Check if the host and port specified are correct and AS Java is up and running.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:416)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:338)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:164)
at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:79)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:315)
... 14 more
Caused by: com.sap.engine.services.rmi_p4.P4IOException: No alive connection. Check state of the server
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:828)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:813)
at com.sap.engine.services.rmi_p4.ClientConnection.sendRequest(ClientConnection.java:362)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:123)
at com.sap.engine.services.rmi_p4.RemoteBroker.resolveInitialReference(RemoteBroker.java:41)
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:153)
... 16 more
[ Error ] Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:416)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:338)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:164)
at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:79)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:315)
... 14 more
Caused by: com.sap.engine.services.rmi_p4.P4IOException: No alive connection. Check state of the server
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:828)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:813)
at com.sap.engine.services.rmi_p4.ClientConnection.sendRequest(ClientConnection.java:362)
at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:123)
at com.sap.engine.services.rmi_p4.RemoteBroker.resolveInitialReference(RemoteBroker.java:41)
at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:153)
... 16 more
[ Error ] Could not establish connection to AS Java on [PO:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
[ Info ] +++ Deployment of session ID [21] finished with status [Error] +++. [[ deployerId=1 ]] [[#3: 340.111 sec]] [
===== Summary - Deploy Result - Start =====
Type | Status : Count
> SCA(s)
- [Aborted] : [80]
> SDA(s)
- [Success] : [80]
- [Admitted] : [1189]
Type | Status : Id
> SCA(s)
- [Aborted] : name: 'BI_UDI', vendor: 'sap.com', name: 'COMP_BUILDT', vendor: 'sap.com', name: 'CU-BASE-JAVA', vendor: 'sap.com', name: 'CU-BASE-WD', vendor: 'sap.com', name: 'DATA-MAPPING', vendor: 'sap.com', name: 'ECM-CORE', vendor: 'sap.com', name: 'ESCONF_BUILDT', vendor: 'sap.com', name: 'ESMP_BUILDT', vendor: 'sap.com', name: 'LM-TOOLS', vendor: 'sap.com', name: 'MMR_SERVER', vendor: 'sap.com', name: 'MOIN_BUILDT', vendor: 'sap.com', name: 'NWTEC', vendor: 'sap.com', name: 'EP-BASIS', vendor: 'sap.com', name: 'SERVICE-COMP', vendor: 'sap.com', name: 'SWLIFECYCL', vendor: 'sap.com', name: 'UKMS_JAVA', vendor: 'sap.com', name: 'KM-KW_JIKS', vendor: 'sap.com', name: 'INTG_VIS', vendor: 'sap.com', name: 'SAP_XIADMIN', vendor: 'sap.com', name: 'SAP_XITOOL', vendor: 'sap.com', name: 'PI-SCP-EXT', vendor: 'sap.com', name: 'PI-SCP-BUILDT', vendor: 'sap.com', name: 'BPEM-CORE', vendor: 'sap.com', name: 'BPEM-FACADE', vendor: 'sap.com', name: 'BPEM-COLLAB', vendor: 'sap.com', name: 'BPEM-BASE', vendor: 'sap.com', name: 'BPEM-BUILDT', vendor: 'sap.com', name: 'BPEM-CONTENT', vendor: 'sap.com', name: 'BPEM-HIM', vendor: 'sap.com', name: 'BPEM-MM', vendor: 'sap.com', name: 'BPEM-MON', vendor: 'sap.com', name: 'BPEM-PP', vendor: 'sap.com', name: 'BPEM-WDUI', vendor: 'sap.com', name: 'BPEM-CUUI', vendor: 'sap.com', name: 'BRMS-BASE', vendor: 'sap.com', name: 'BRMS-BUILDT', vendor: 'sap.com', name: 'BRMS-CORE', vendor: 'sap.com', name: 'BRMS-FACADE', vendor: 'sap.com', name: 'BRMS-WDUI', vendor: 'sap.com', name: 'BRMS-MON', vendor: 'sap.com', name: 'FP-INFRA', vendor: 'sap.com', name: 'CU-BASE-WD-EXT', vendor: 'sap.com', name: 'TM-WLUI', vendor: 'sap.com', name: 'BPEM-ACC', vendor: 'sap.com', name: 'CAF-MF', vendor: 'sap.com', name: 'CAF-UI', vendor: 'sap.com', name: 'COLLAB-ADP', vendor: 'sap.com', name: 'CAF', vendor: 'sap.com', name: 'BI-BASE-S', vendor: 'sap.com', name: 'BI-BASE-B', vendor: 'sap.com', name: 'BI-BASE-E', vendor: 'sap.com', name: 'SEA-CORE', vendor: 'sap.com', name: 'SEA-FACADE', vendor: 'sap.com', name: 'SEA-UI', vendor: 'sap.com', name: 'BI-WDEXT', vendor: 'sap.com', name: 'CU-WD4VC-ADPT', vendor: 'sap.com', name: 'ECM-APPS', vendor: 'sap.com', name: 'ECM-STORE', vendor: 'sap.com', name: 'EP-ADMIN', vendor: 'sap.com', name: 'EP_BUILDT', vendor: 'sap.com', name: 'EP-CONNECTIVITY', vendor: 'sap.com', name: 'EP-MODELING', vendor: 'sap.com', name: 'EP-RUNTIME', vendor: 'sap.com', name: 'UWLJWF', vendor: 'sap.com', name: 'VCFREESTYLEKIT', vendor: 'sap.com', name: 'VCCORERT', vendor: 'sap.com', name: 'VCBASE', vendor: 'sap.com', name: 'VCKITBI', vendor: 'sap.com', name: 'VCFRAMEWORK', vendor: 'sap.com', name: 'VTP_BUILDT', vendor: 'sap.com', name: 'WDEXTENSIONS', vendor: 'sap.com', name: 'WD-FLEX', vendor: 'sap.com', name: 'ECM-ADMIN', vendor: 'sap.com', name: 'ECM-JEE-COMP', vendor: 'sap.com', name: 'SAP_XIESR', vendor: 'sap.com', name: 'SAP_XIGUILIB', vendor: 'sap.com', name: 'XI_CNT_SAP_BASIS', vendor: 'sap.com', name: 'INTG_VIS_DCJ', vendor: 'sap.com', name: 'SAP_XIAF', vendor: 'sap.com', name: 'SOAMON', vendor: 'sap.com',
> SDA(s)
- [Success] : name: 'com.sap.ip.bi.sdk.dac.connector.odbodll', vendor: 'sap.com', name: 'com.sap.glx.mapping.lib', vendor: 'sap.com', name: 'com.sap.glx.common.rt.lib', vendor: 'sap.com', name: 'tc~lm~ctc~confs~service_sda', vendor: 'sap.com', name: 'bi~mmr~dictionary', vendor: 'sap.com', name: 'bi~mmr~deployer', vendor: 'sap.com', name: 'com.sap.portal.pcm.indexingservice', vendor: 'sap.com', name: 'com.sap.netweaver.rtmf.server', vendor: 'sap.com', name: 'tc~rtmf~service', vendor: 'sap.com', name: 'com.sap.aii.sca.xi.svc', vendor: 'sap.com', name: 'com.sap.aii.sca.maas.svc', vendor: 'sap.com', name: 'tc~bpem~eventlog~ddic', vendor: 'sap.com', name: 'com.sap.glx.base.lib', vendor: 'sap.com', name: 'com.sap.glx.container.dbschema', vendor: 'sap.com', name: 'com.sap.glx.rrhandlermanager.svc', vendor: 'sap.com', name: 'com.sap.glx.repository.handler.dbschema', vendor: 'sap.com', name: 'com.sap.glx.core.svc', vendor: 'sap.com', name: 'com.sap.glx.contextcontainer.dbschema', vendor: 'sap.com', name: 'com.sap.glx.core.dbschema', vendor: 'sap.com', name: 'com.sap.glx.core.svc.facade', vendor: 'sap.com', name: 'tc~bpem~index~ddic', vendor: 'sap.com', name: 'tc~bpem~base~svc', vendor: 'sap.com', name: 'com.sap.glx.repository.dbschema', vendor: 'sap.com', name: 'tc~bpem~bl~lib', vendor: 'sap.com', name: 'tc~bpem~base~type~plib', vendor: 'sap.com', name: 'com.sap.glx.repository.ifc', vendor: 'sap.com', name: 'com.sap.glx.repository.svc', vendor: 'sap.com', name: 'tc~bpem~base~lib', vendor: 'sap.com', name: 'tc~bpem~tm~ddic', vendor: 'sap.com', name: 'tc~bpem~shared~lib', vendor: 'sap.com', name: 'tc~brms~engine~lib', vendor: 'sap.com', name: 'tc~brms~ws~svc', vendor: 'sap.com', name: 'tc~brms~repository~svc', vendor: 'sap.com', name: 'tc~brms~io~plib', vendor: 'sap.com', name: 'tc~brms~acl~plib', vendor: 'sap.com', name: 'tc~brms~ddic', vendor: 'sap.com', name: 'tc~brms~wdui~plib', vendor: 'sap.com', name: 'caf~um~relgroups~ddic', vendor: 'sap.com', name: 'tc~esi~sea~schema~ddic', vendor: 'sap.com', name: 'tc~esi~sea~service', vendor: 'sap.com', name: 'tc~esi~sea~api~lib', vendor: 'sap.com', name: 'com.sap.portal.healthChecks', vendor: 'sap.com', name: 'com.sap.portal.fpn.migration.fpnmigrationlib', vendor: 'sap.com', name: 'com.sap.portal.landscape.config', vendor: 'sap.com', name: 'tc~pp~gpal~deploylistener', vendor: 'sap.com', name: 'com.sap.portal.fpn.service', vendor: 'sap.com', name: 'com.sap.portal.smart.smartsrv', vendor: 'sap.com', name: 'com.sap.obn.migration.obnmigrationlib', vendor: 'sap.com', name: 'tc~kmc~bc.uwl~api', vendor: 'sap.com', name: 'devserver_lib', vendor: 'sap.com', name: 'vc_ds_service', vendor: 'sap.com', name: 'vc_generation', vendor: 'sap.com', name: 'ds_repository', vendor: 'sap.com', name: 'ds_environment', vendor: 'sap.com', name: 'visualcomposer_server_api', vendor: 'sap.com', name: 'SAPMetamodelFW', vendor: 'sap.com', name: 'SAPBuildPluginHandler', vendor: 'sap.com', name: 'tc~ecm~svc~deploy', vendor: 'sap.com', name: 'com.sap.aii.adapter.rfc.svc', vendor: 'sap.com', name: 'com.sap.aii.adapter.ispeak.svc', vendor: 'sap.com', name: 'com.sap.aii.af.maas.lib', vendor: 'sap.com', name: 'com.sap.aii.af.ifc.facade', vendor: 'sap.com', name: 'com.sap.aii.adapter.marketplace.lib', vendor: 'sap.com', name: 'com.sap.aii.adapter.jdbc.svc', vendor: 'sap.com', name: 'com.sap.aii.adapter.bc.svc', vendor: 'sap.com', name: 'com.sap.aii.af.int.svc.facade', vendor: 'sap.com', name: 'com.sap.aii.af.svc.facade', vendor: 'sap.com', name: 'com.sap.aii.mapping.lib.facade', vendor: 'sap.com', name: 'com.sap.aii.adapter.file.svc', vendor: 'sap.com', name: 'com.sap.aii.af.lib.facade', vendor: 'sap.com', name: 'com.sap.aii.proxy.svc.facade', vendor: 'sap.com', name: 'com.sap.aii.adapter.marketplace.svc', vendor: 'sap.com', name: 'com.sap.aii.adapter.ispeak.dbs', vendor: 'sap.com', name: 'com.sap.aii.adapter.mail.svc', vendor: 'sap.com', name: 'com.sap.aii.adapter.ws.cxf.lib', vendor: 'sap.com', name: 'com.sap.aii.proxy.svc', vendor: 'sap.com', name: 'com.sap.aii.adapter.xi.svc', vendor: 'sap.com', name: 'com.sap.aii.adapter.http.svc', vendor: 'sap.com', name: 'com.sap.aii.adapter.jms.svc', vendor: 'sap.com', name: 'com.sap.aii.af.axis.lib', vendor: 'sap.com',
- [Admitted] : name: 'com.sap.ip.bi.sdk.monitoring', vendor: 'sap.com', name: 'bi~sdk~resultset', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.dac.connector.checks', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.dac.connector.checko', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.dac.connector.xmla.x', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.dac.connector.jdbc', vendor: 'sap.com', name: 'tc~bi~sdk', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.datasource.ds', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.datasource.fields', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.dac.connector.java', vendor: 'sap.com', name: 'bi~sdk~core', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.datasource.sys', vendor: 'sap.com', name: 'bi~sdk~query', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.datasource.sync', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.dac.connector.checkj', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.dac.connector.xmla', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.dac.connector.checkx', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.dac.connector.odbo', vendor: 'sap.com', name: 'sc~bi_udi', vendor: 'sap.com', name: 'com.sap.ip.bi.sdk.dac.connector.sapq', vendor: 'sap.com', name: 'sc~comp_buildt', vendor: 'sap.com', name: 'sc~cu-base-java', vendor: 'sap.com', name: 'tc~cu~base~java~ear', vendor: 'sap.com', name: 'tc~cu~base~wd~adapter~wd2wd~ps', vendor: 'sap.com', name: 'tc~cu~base~wd~core', vendor: 'sap.com', name: 'tc~cu~base~wd~adapter~wd2wd', vendor: 'sap.com', name: 'sc~cu-base-wd', vendor: 'sap.com', name: 'tc~cu~base~wd~intapi', vendor: 'sap.com', name: 'tc~cu~base~wd~utils', vendor: 'sap.com', name: 'tc~cu~base~wd~contract~ps', vendor: 'sap.com', name: 'sc~data-mapping', vendor: 'sap.com', name: 'tc~ecm~core', vendor: 'sap.com', name: 'sc~ecm-core', vendor: 'sap.com', name: 'tc~ecm', vendor: 'sap.com', name: 'sc~esconf_buildt', vendor: 'sap.com', name: 'sc~esmp_buildt', vendor: 'sap.com', name: 'tc~archtech~browser~viewer~model', vendor: 'sap.com', name: 'tc~lm~aci~apps~wd~ui~taskplnr', vendor: 'sap.com', name: 'tc~lm~aci~apps~wd~ui~processviewer', vendor: 'sap.com', name: 'tc~lm~itsam~lmr~app', vendor: 'sap.com', name: 'tc~bcf~prov~ddic', vendor: 'sap.com', name: 'tc~lm~ctc~nwa~initialsetuptables', vendor: 'sap.com', name: 'tc~lm~itsam~ui~ctc~wd', vendor: 'sap.com', name: 'tc~lm~aci~apps~wd~ui~master', vendor: 'sap.com', name: 'tc~lm~aci~engine~sapctrl~wsproxy', vendor: 'sap.com', name: 'tc~lm~aci~engine~ddic', vendor: 'sap.com', name: 'tc~slm~ui_maintain', vendor: 'sap.com', name: 'tc~archtech~browser_ume', vendor: 'sap.com', name: 'tc~slm~ui_jnet', vendor: 'sap.com', name: 'tc~lm~ctc~itsam~kpi', vendor: 'sap.com', name: 'tc~archtech~browser~viewer~defaultui', vendor: 'sap.com', name: 'tc~bcf~ws~ddic', vendor: 'sap.com', name: 'tc~lm~aci~vpm~wsproxy~sap', vendor: 'sap.com', name: 'tc~bcf~prov~wd', vendor: 'sap.com', name: 'tc~archtech~browser~viewer~compif', vendor: 'sap.com', name: 'tc~bcf~lib~ear', vendor: 'sap.com', name: 'tc~lm~itsam~ui~sys~overview~xi~wd', vendor: 'sap.com', name: 'tc~lm~aci~virtual~vmware~wsproxy', vendor: 'sap.com', name: 'tc~lm~aci~apps~wd~ui~resource', vendor: 'sap.com', name: 'tc~bcf_xi~ear', vendor: 'sap.com', name: 'tc~archtech~sbook_wd', vendor: 'sap.com', name: 'tc~lm~ctc~nwa~other_ear', vendor: 'sap.com', name: 'tc~lm~aci~apps~wd~ui~aclog', vendor: 'sap.com', name: 'tc~bcf~prov~ear', vendor: 'sap.com', name: 'tc~sec~sanity~jmx~sda', vendor: 'sap.com', name: 'tc~archtech~browser~viewer~locator', vendor: 'sap.com', name: 'tc~slm~ui_review', vendor: 'sap.com', name: 'tc~lm~aci~engine~csm~wsproxy', vendor: 'sap.com', name: 'tc~lm~aci~apps~wd~utils', vendor: 'sap.com', name: 'tc~archtech~browser~viewer~xmlui', vendor: 'sap.com', name: 'tc~lm~ctc~nwa~sldregisterapp', vendor: 'sap.com', name: 'sc~lm-tools', vendor: 'sap.com', name: 'tc~lm~aci~apps~wd~ui~services', vendor: 'sap.com', name: 'tc~lm~aci~apps~wd~ui~vpm', vendor: 'sap.com', name: 'tc~lm~ctc~confs~startup_app', vendor: 'sap.com', name: 'tc~lm~itsam~ui~overview~panel~interface', vendor: 'sap.com', name: 'tc~lm~itsam~ui~avail~panel', vendor: 'sap.com', name: 'tc~bcf~ws~ear', vendor: 'sap.com', name: 'tc~slm~ui_slm', vendor: 'sap.com', name: 'tc~lm~itsam~ui~thresholds~wd', vendor: 'sap.com', name: 'tc~lm~ctc~ccl~rep~hist~ddic', vendor: 'sap.com', name: 'tc~lm~aci~engine~archconfig', vendor: 'sap.com', name: 'tc~lm~itsam~ui~sysinfo', vendor: 'sap.com', name: 'tc~lm~aci~engine~hstctrl~wsproxy', vendor: 'sap.com', name: 'tc~lm~ctc~nwa~spc~config_ear', vendor: 'sap.com', name: 'tc~lm~aci~apps~wd~types', vendor: 'sap.com', name: 'tc~lm~aci~apps~wd~model', vendor: 'sap.com', name: 'tc~lm~aci~apps~wd~ui~overview', vendor: 'sap.com', name: 'tc~slm~ui_navigation', vendor: 'sap.com', name: 'tc~archtech~sbook_init_j2ee', vendor: 'sap.com', name: 'tc~bcf~prov~ddic~content', vendor: 'sap.com', name: 'tc~sld~destsvc_dic', vendor: 'sap.com', name: 'tc~bizc~ws~ear', vendor: 'sap.com', name: 'tc~archtech~browser', vendor: 'sap.com', name: 'tc~archtech~sbook_j2ee', vendor: 'sap.com', name: 'tc~sec~sanity~wd', vendor: 'sap.com', name: 'tc~lm~itsam~ui~nwso~cfg~db', vendor: 'sap.com', name: 'tc~lm~itsam~ui~perf~panel', vendor: 'sap.com', name: 'tc~archtech~browser~dbschema', vendor: 'sap.com', name: 'tc~bcf~transport~ddic', vendor: 'sap.com', name: 'tc~lm~aci~apps~wd~ui~acenable', vendor: 'sap.com', name: 'tc~lm~nzdm~crr~ui', vendor: 'sap.com', name: 'bi~mmr~mini_md_library', vendor: 'sap.com', name: 'bi~mmr~mini_mm_library', vendor: 'sap.com', name: 'bi~mmr~api', vendor: 'sap.com', name: 'bi~mmr~webToolsEAP', vendor: 'sap.com', name: 'bi~mmr~bi_library', vendor: 'sap.com', name: 'bi~mmr~bi_ear', vendor: 'sap.com', name: 'bi~mmr~mmrlib', vendor: 'sap.com', name: 'bi~mmr~reportmodel_library', vendor: 'sap.com', name: 'bi~mmr~cwm_1.0_library', vendor: 'sap.com', name: 'bi~mmr~reportmodel_ear', vendor: 'sap.com', name: 'bi~mmr~jnet', vendor: 'sap.com', name: 'bi~mmr~cwm_1.0_ear', vendor: 'sap.com', name: 'sc~mmr_server', vendor: 'sap.com', name: 'bi~mmr~mmrapplib', vendor: 'sap.com', name: 'bi~mmr~mof_1.4_library', vendor: 'sap.com', name: 'bi~mmr~amlib', vendor: 'sap.com', name: 'bi~mmr~mini_mm_ear', vendor: 'sap.com', name: 'bi~mmr~mini_md_ear', vendor: 'sap.com', name: 'bi~mmr~bi_repository', vendor: 'sap.com', name: 'bi~mmr~metamodel_library', vendor: 'sap.com', name: 'bi~mmr~mof_1.4_ear', vendor: 'sap.com', name: 'bi~mmr~ejb', vendor: 'sap.com', name: 'bi~mmr~metamodel_ear', vendor: 'sap.com', name: 'sc~moin_buildt', vendor: 'sap.com', name: 'sc~nwtec', vendor: 'sap.com', name: 'tc~di~sdic~support~wd', vendor: 'sap.com', name: 'com.sap.portal.supportability.isolde.api', vendor: 'sap.com', name: 'com.sap.portal.pcd.textrepository', vendor: 'sap.com', name: 'com.sap.portal.prt.cache', vendor: 'sap.com', name: 'com.sap.portal.htmlb', vendor: 'sap.com', name: 'tc~jpe~dbschema', vendor: 'sap.com', name: 'com.sap.portal.design.urdesigndataless', vendor: 'sap.com', name: 'com.sap.portal.pcm.admin.pcdimplservice', vendor: 'sap.com', name: 'com.sap.portal.runtime.system.notification', vendor: 'sap.com', name: 'sc~ep-basis', vendor: 'sap.com', name: 'com.sap.portal.runtime.system.clusterinformation', vendor: 'sap.com', name: 'com.sap.portal.runtime.application.contentconverter', vendor: 'sap.com', name: 'tc~epbc~pcd~pars~srvgl', vendor: 'sap.com', name: 'com.sap.portal.pcd.admintools.ucdadmin', vendor: 'sap.com', name: 'com.sap.portal.pcd.aclservice', vendor: 'sap.com', name: 'com.sap.portal.design.ui5designdataless', vendor: 'sap.com', name: 'com.sap.security.ume.consistencycheck', vendor: 'sap.com', name: 'com.sap.portal.pcd.admintools.configuration', vendor: 'sap.com', name: 'com.sap.portal.pcd.umwrapperservice', vendor: 'sap.com', name: 'tc~epbc~prt~apps~restricted', vendor: 'sap.com', name: 'rtmfcommunicator', vendor: 'sap.com', name: 'com.sap.portal.themes.lafservice', vendor: 'sap.com', name: 'tc~epbc~resourcerepository~api', vendor: 'sap.com', name: 'com.sap.portal.usermapping', vendor: 'sap.com', name: 'com.sap.portal.runtime.system.hooks', vendor: 'sap.com', name: 'com.sap.portal.runtime.system.authentication', vendor: 'sap.com', name: 'com.sap.portal.pcd.softcacheservice', vendor: 'sap.com', name: 'com.sap.portal.pcm.metadata.service', vendor: 'sap.com', name: 'tc~epbc~pcm~pcmadminimplsrv', vendor: 'sap.com', name: 'com.sap.portal.design.vc5designdataless', vendor: 'sap.com', name: 'com.sap.portal.pcd.basicrolefactory', vendor: 'sap.com', name: 'tc~supportplatform~wd', vendor: 'sap.com', name: 'com.sap.portal.design.portaldesigndata', vendor: 'sap.com', name: 'com.sap.portal.runtime.system.prtconnection', vendor: 'sap.com', name: 'com.sap.portal.runtime.prtws', vendor: 'sap.com', name: 'com.sap.portal.resourcerepository', vendor: 'sap.com', name: 'com.sap.portal.pcd.lockservice', vendor: 'sap.com', name: 'irj', vendor: 'sap.com', name: 'tc~epbc~prt~apps', vendor: 'sap.com', name: 'com.sap.portal.runtime.application.xsltransform', vendor: 'sap.com', name: 'com.sap.portal.pcd.traceservice', vendor: 'sap.com', name: 'tc~epbc~pcm~ext', vendor: 'sap.com', name: 'com.sap.portal.design.portaldesigndataless', vendor: 'sap.com', name: 'tc~rtmf~wdtestapp', vendor: 'sap.com', name: 'com.sap.portal.pcd.basictransport', vendor: 'sap.com', name: 'com.sap.portal.pcd.glservice', vendor: 'sap.com', name: 'com.sap.portal.runtime.system.idcounters', vendor: 'sap.com', name: 'com.sap.portal.design.urdesigndata', vendor: 'sap.com', name: 'com.sap.portal.usermanagement.admin', vendor: 'sap.com', name: 'tc~epbc~ume~ep5~deprecated', vendor: 'sap.com', name: 'tc~jpe~engine', vendor: 'sap.com', name: 'tc~epbc~pcd~pars~restricted', vendor: 'sap.com', name: 'tc~ep~useragent~api', vendor: 'sap.com', name: 'com.sap.portal.runtime.gwtintegration', vendor: 'sap.com', name: 'tc~bc~jpe~engine~api', vendor: 'sap.com', name: 'com.sap.portal.runtime.system.connection', vendor: 'sap.com', name: 'com.sap.portal.usermanagement', vendor: 'sap.com', name: 'com.sap.portal.pcd.configservice', vendor: 'sap.com', name: 'com.sap.portal.runtime.application.soap', vendor: 'sap.com', name: 'pcm_ext_libSDA', vendor: 'sap.com', name: 'com.sap.portal.runtime.application.document', vendor: 'sap.com', -
New Installation : Login Delays and Wifi Problems
Hey There,
I just a HP Pavilion DV2850ET laptop computer and decided to run Arch on it. But I have 2 major problems as for now. I'll be very pleased if I get over them.
1) When the kernel starts loading with vga=792 parameter on, 2 Arch Linux logo shows up instead of 1.. I don't think that this is normal.
2) I've installed all packages with the newest ISO image release: Archlinux-i686-2007.08-2.core.iso - It's installed without any problems. When the login prompt appears (that I'm going to write root to do the rest of the installation for a while) I can't write anything for about 10-15 seconds. After the 10-15 seconds of waiting, I can write whatever I want.. But this happens all the time and I have to wait everytime I open the computer. I thought that maybe this could be something related with the kernel installed so I upgraded to testing. But nothing changed. This is the most annoying part actually..
3) I have 07:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) on the laptop. There are several modules for this card as far as I can see like: ipw3945, ipl3945, etc.. During the installation, I let hwdetect to fill modules part in rc.conf and it added these modules: sky2 iwl3945 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore - What are all these sound modules any way ? Are they really necessary ?
Here are lspci and dmesg outputs. I hope they help..
lspci:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev a1)
05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller (rev 14)
07:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
08:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
08:09.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
08:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
08:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
08:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
dmesg:
Linux version 2.6.23-ARCH (root@T-POWA-LX) (gcc version 4.2.2) #1 SMP PREEMPT Mon Oct 15 16:46:31 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fec0000 (usable)
BIOS-e820: 000000007fec0000 - 000000007fedf000 (ACPI NVS)
BIOS-e820: 000000007fedf000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7e50
Entering add_active_range(0, 0, 523968) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 523968
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 523968
On node 0 totalpages: 523968
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2301 pages used for memmap
HighMem zone: 292291 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F7E20, 0024 (r2 PTLTD )
ACPI: XSDT 7FED05BA, 0074 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
ACPI: FACP 7FEDBC3A, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
ACPI: DSDT 7FED12C7, A8FF (r2 INTEL CRESTLNE 6040000 MSFT 3000000)
ACPI: FACS 7FEDEFC0, 0040
ACPI: HPET 7FEDBD2E, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: MCFG 7FEDBD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: TCPA 7FEDBDA2, 0032 (r1 Intel CRESTLN 6040000 5A52)
ACPI: TMOR 7FEDBDD4, 0026 (r1 PTLTD 6040000 PTL 3)
ACPI: SLIC 7FEDBDFA, 0176 (r1 HPQOEM SLIC-MPC 6040000 HPQ 1)
ACPI: APIC 7FEDBF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT 7FEDBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SSDT 7FED0FEA, 02DD (r1 SataRe SataAhci 1000 INTL 20060912)
ACPI: SSDT 7FED062E, 04E6 (r1 PmRef CpuPm 3000 INTL 20060912)
ACPI: PM-Timer IO Port: 0x1008
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: S. Rosa CRB APIC at: 0xFEE00000
Processor #0 6:15 APIC version 20
Processor #1 6:15 APIC version 20
I/O APIC #2 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order. Total pages: 519875
Kernel command line: root=/dev/sda2 ro quiet vga=792 noapic nolapic
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1995.160 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2071792k/2095872k available (2442k kernel code, 22764k reserved, 814k data, 296k init, 1178368k highmem)
virtual kernel memory layout:
fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0435000 - 0xc047f000 ( 296 kB)
.data : 0xc0362839 - 0xc042e21c ( 814 kB)
.text : 0xc0100000 - 0xc0362839 (2442 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3994.51 BogoMIPS (lpj=6655229)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0c00)
CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3991.19 BogoMIPS (lpj=6649906)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
Total of 2 processors activated (7986.70 BogoMIPS).
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: If "acpi_osi=Linux" works better,
Please send dmidecode to [email protected]
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:06: iomem range 0xfed00000-0xfed003ff could not be reserved
PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: cc000000-ceffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: 3000-3fff
MEM window: f2000000-f3ffffff
PREFETCH window: f0000000-f1ffffff
PCI: Bridge: 0000:00:1c.1
IO window: 4000-4fff
MEM window: f4000000-f40fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: f4100000-f41fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: f4200000-f42fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[b] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Freeing initrd memory: 1578k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
vesafb: framebuffer at 0xcd000000, mapped to 0xf8880000, using 6144k, total 14336k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:b540
vesafb: pmi: set display start = c00cb5a3, set palette = c00cb5fe
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 296k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
libata version 2.21 loaded.
ahci 0000:00:1f.2: version 2.3
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.2[b] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 cmd 0xf8830100 ctl 0x00000000 bmdma 0x00000000 irq 10
ata2: SATA max UDMA/133 cmd 0xf8830180 ctl 0x00000000 bmdma 0x00000000 irq 10
ata3: SATA max UDMA/133 cmd 0xf8830200 ctl 0x00000000 bmdma 0x00000000 irq 10
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST9160821AS, 3.BHD, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.BH PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011830 irq 14
ata5: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011838 irq 15
ata4.00: ATAPI: TSSTcorpCD/DVDW TS-L632M, 0A17, max MWDMA2
ata4.00: configured for MWDMA2
scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632M 0A17 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 10, io base 0x00001840
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1a.1[b] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 11, io base 0x00001860
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 10, io mem 0xf4505c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4506000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 11, io base 0x000018a0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 10, io base 0x000018c0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 4-5: new high speed USB device using ehci_hcd and address 3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 4-5: configuration #1 chosen from 1 choice
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:05:00.0 to 64
sky2 0000:05:00.0: v1.18 addr 0xf4000000 irq 11 Yukon-FE (0xb7) rev 3
sky2 eth0: addr 00:16:d3:f0:65:5b
usb 7-2: new full speed USB device using uhci_hcd and address 2
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.0ds
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:07:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
usb 7-2: configuration #1 chosen from 1 choice
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
wmaster0: Selected rate control algorithm 'iwl-3945-rs'
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/virtual/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/virtual/input/input3
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/virtual/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 7FED0CA8, 027A (r1 PmRef Cpu0Ist 3000 INTL 20060912)
ACPI: SSDT 7FED0B14, 010F (r1 PmRef Cpu0Cst 3001 INTL 20060912)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: SSDT 7FED0F22, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20060912)
ACPI: SSDT 7FED0C23, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20060912)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
ACPI: Thermal Zone [TZS0] (54 C)
ACPI: Thermal Zone [TZS1] (65 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
usbcore: registered new interface driver hiddev
Linux agpgart interface v0.102
input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.0-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ACPI: PCI Interrupt 0000:00:1f.3[C] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
input: PS/2 Mouse as /devices/virtual/input/input6
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7
input: Video Bus as /devices/virtual/input/input8
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/virtual/input/input9
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ACPI: PCI Interrupt 0000:08:09.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[f4200000-f42007ff] Max Packet=[2048] IR/IT contexts=[4/4]
sdhci: SDHCI controller found at 0000:08:09.1 [1180:0822] (rev 22)
ACPI: PCI Interrupt 0000:08:09.1[b] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
mmc0: SDHCI at 0xf4200800 irq 10 DMA
EXT3 FS on sda2, internal journal
ieee1394: Host added: ID:BUS[0-00:1023] GUID[07e40a00fd365135]
Clocksource tsc unstable (delta = -266484522 ns)
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
usb 4-4: new high speed USB device using ehci_hcd and address 5
usb 4-4: configuration #1 chosen from 1 choice
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Initializing USB Mass Storage driver...
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 5:0:0:0: Direct-Access SanDisk Cruzer Micro 0.1 PQ: 0 ANSI: 2
sd 5:0:0:0: [sdb] 2001888 512-byte hardware sectors (1025 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] 2001888 512-byte hardware sectors (1025 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan completeAt this moment, I believe the ipw3945 module and it's deamon work better than the iwf3945. So you can start changing this. In the module line in rc.conf change iwf to ipw. In the deamons line add before the network deamon ipw3945d and youre done.
The double archlogo is standard I think, got them too -
CD-ROM works for installer but disappears on boot
I'm having a strange issue. I got a Lenovo IdeaPad yesterday and promptly wiped vista off and installed Arch.
The install went swimmingly, but for some strange reason, the cdrom drive is not detected when I boot into Arch. I installed Arch from the CD and the device was /dev/sr0 during the installation but /dev/cdrom, /dev/dvd nor /dev/sr0 exist. I'm really confused as to why it worked during the install, but not when I booted off of my hard drive. I've updated all my packages and upgraded to to the newest kernel.
Also, the BIOS had two ATA settings: AHCI and "compatibility". I've tried both settings and tried reinstalling with both settings, but they don't appear to make a difference.
Here is some debug information:
output of lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 9581
01:00.1 Audio device: ATI Technologies Inc RV630 audio device [Radeon HD 2600 Series]
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
04:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
0e:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0e:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0e:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
0e:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
0e:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
Output of lsdev
Device DMA IRQ I/O Ports
0000:00:1a.0 1800-181f
0000:00:1a.1 1820-183f
0000:00:1d.0 1840-185f
0000:00:1d.1 1860-187f
0000:00:1d.2 1880-189f
0000:00:1f.1 0170-0177 01f0-01f7 0376-0376 03f6-03f6 18a0-18af
0000:00:1f.2 18c8-18cb 18cc-18cf 18d0-18df 18e0-18ef 18f0-18f7 18f8-18ff
0000:00:1f.3 1c00-1c1f
0000:01:00.0 2000-20ff
acpi 9
ACPI 1000-1003 1004-1005 1008-100b 1010-1015 1020-1020 1028-102f
cascade 4
dma 0080-008f
dma1 0000-001f
dma2 00c0-00df
fglrx 16
fpu 00f0-00ff
i801_smbus 1c00-1c1f
i8042 1 12
Intel 17 22
keyboard 0060-006f
libata 14 15 0170-0177 01f0-01f7 0376-0376 03f6-03f6 18a0-18af 18c8-18cb 18cc-18cf 18e0-18ef 18f0-18f7 18f8-18ff
PCI 0cf8-0cff 2000-2fff 3000-3fff
pic1 0020-0021
pic2 00a0-00a1
rtc0 8 0070-0077
sdhci:slot0 18
timer 0
timer0 0040-0043
timer1 0050-0053
uhci_hcd 1800-181f 1820-183f 1840-185f 1860-187f 1880-189f
uhci_hcd:usb4 21
uhci_hcd:usb5 20
uhci_hcd:usb6 19
vga+ 03c0-03df
Some lines from my /var/log/messages.log
Jan 31 23:49:35 l1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
Jan 31 23:49:35 l1 scsi0 : ata_piix
Jan 31 23:49:35 l1 scsi1 : ata_piix
Jan 31 23:49:35 l1 ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118a0 irq 14
Jan 31 23:49:35 l1 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118a8 irq 15
Jan 31 23:49:35 l1 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Jan 31 23:49:35 l1 ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 18 (level, low) -> IRQ 18
Jan 31 23:49:35 l1 scsi2 : ata_piix
Jan 31 23:49:35 l1 scsi3 : ata_piix
Jan 31 23:49:35 l1 ata3: SATA max UDMA/133 cmd 0x000118f8 ctl 0x000118ce bmdma 0x000118e0 irq 18
Jan 31 23:49:35 l1 ata4: SATA max UDMA/133 cmd 0x000118f0 ctl 0x000118ca bmdma 0x000118e8 irq 18
Jan 31 23:49:35 l1 ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
Jan 31 23:49:35 l1 ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jan 31 23:49:35 l1 ata3.00: configured for UDMA/133
Jan 31 23:49:35 l1 scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
I believe that the Hitachi is my hard drive. I didn't see the cdrom there.
I'm not sure if this will help but here is the contents of /dev/disk:
by-id by-path by-uuid
./by-id:
ata-Hitachi_HTS542525K9SA00_071120BB0F00WDGV9W5C ata-Hitachi_HTS542525K9SA00_071120BB0F00WDGV9W5C-part3 scsi-SATA_Hitachi_HTS5425071120BB0F00WDGV9W5C-part2
ata-Hitachi_HTS542525K9SA00_071120BB0F00WDGV9W5C-part1 scsi-SATA_Hitachi_HTS5425071120BB0F00WDGV9W5C scsi-SATA_Hitachi_HTS5425071120BB0F00WDGV9W5C-part3
ata-Hitachi_HTS542525K9SA00_071120BB0F00WDGV9W5C-part2 scsi-SATA_Hitachi_HTS5425071120BB0F00WDGV9W5C-part1
./by-path:
pci-0000:00:1f.2-scsi-0:0:0:0 pci-0000:00:1f.2-scsi-0:0:0:0-part1 pci-0000:00:1f.2-scsi-0:0:0:0-part2 pci-0000:00:1f.2-scsi-0:0:0:0-part3
./by-uuid:
1D1C-0A10 7b41b7c8-2843-457e-98a3-95b3226b2faf f63ca591-8d71-4993-a7f3-1393b600106c
Thanks so much!
~Peter
Last edited by linuxlefty (2008-01-31 17:32:47)Risking the anger and wrath of the forum gods, I am bumping a verrrrry old topic.
It's close to five months since I first encountered this problem. I have waited patiently and kernel update after kernel update has brought me hope thinking that the new kernel would contain the magic fix for my problem. It's starting to get annoying, not being able to use my cdrom. So, I am once again throwing myself before the mercy of your wisdom, imploring you to supply the magic solution to my troubles.
I am once again putting debug info for good luck
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 9581
01:00.1 Audio device: ATI Technologies Inc RV630 audio device [Radeon HD 2600 Series]
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
04:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
0e:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0e:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0e:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
0e:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
It's interesting to note that 00:lf.2 is now being labeled as a SATA controller when it was being labeled as a IDE controller before (does this mean anything)?
dmesg:
Linux version 2.6.25-ARCH (root@architect) (gcc version 4.3.0 (GCC) ) #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f7fc0] 000f7fc0
Entering add_active_range(0, 0, 523984) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 523984
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 523984
On node 0 totalpages: 523984
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2301 pages used for memmap
HighMem zone: 292307 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F7EB0, 0024 (r2 LENOVO)
ACPI: XSDT 7FED721E, 0074 (r1 LENOVO CB-01 6040000 LTP 0)
ACPI: FACP 7FEDFC3A, 00F4 (r3 LENOVO CB-01 6040000 ALAN 1)
ACPI: DSDT 7FED83A5, 7821 (r2 LENOVO CB-01 6040000 MSFT 2000001)
ACPI: FACS 7FEE2FC0, 0040
ACPI: HPET 7FEDFD2E, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: MCFG 7FEDFD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: TCPA 7FEDFDA2, 0032 (r1 Intel CRESTLN 6040000 5A52)
ACPI: SLIC 7FEDFDD4, 0176 (r1 LENOVO CB-01 6040000 LNVO 1)
ACPI: TMOR 7FEDFF4A, 0026 (r1 PTLTD 6040000 PTL 3)
ACPI: APIC 7FEDFF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT 7FEDFFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SSDT 7FED80D6, 02CF (r1 SataRe SataAhci 1000 INTL 20050624)
ACPI: SSDT 7FED7292, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519891
Kernel command line: root=/dev/sda2 ro
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1661.966 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2072724k/2095936k available (2082k kernel code, 21932k reserved, 712k data, 268k init, 1178432k highmem)
virtual kernel memory layout:
fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc03c1000 - 0xc0404000 ( 268 kB)
.data : 0xc0308ad8 - 0xc03baea0 ( 712 kB)
.text : 0xc0100000 - 0xc0308ad8 (2082 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 3328.02 BogoMIPS (lpj=5545635)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
CPU0: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d
Booting processor 1/1 ip 4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 18177.76 BogoMIPS (lpj=30284428)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d
Total of 2 processors activated (21506.78 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: LENOVO
ACPI: DMI Product Name: INVALID
ACPI: DMI Product Version: IdeaPad Y710
ACPI: DMI Board Name: INVALID
ACPI: DMI BIOS Vendor: LENOVO
ACPI: DMI BIOS Date: 12/04/2007
ACPI: Please send DMI info above to [email protected]
ACPI: If "acpi_osi=Linux" works better, please notify [email protected]
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 *3 4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:06: iomem range 0xfed00000-0xfed003ff could not be reserved
system 00:08: ioport range 0x800-0x80f has been reserved
system 00:08: ioport range 0x1000-0x107f has been reserved
system 00:08: ioport range 0x1180-0x11bf has been reserved
system 00:08: ioport range 0xfe00-0xfe00 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 0xf4000000-0xf40fffff
PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: 0xf4100000-0xf41fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: 0xf4200000-0xf42fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: 3000-3fff
MEM window: 0xf2000000-0xf3ffffff
PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
PCI: Bridge: 0000:00:1c.5
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: 0xf4300000-0xf43fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs...<7>Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
done
Freeing initrd memory: 673k freed
Simple Boot Flag at 0x35 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Allocate Port Service[0000:00:1c.5:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 268k freed
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604100 irq 18
ata2: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604180 irq 18
ata3: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604200 irq 18
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4604800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 2-0:1.0: unable to enumerate USB device on port 1
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4604c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
usb usb6: configuration #1 chosen from 1 choice
Driver 'sd' needs updating - please use bus_type methods
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
hub 4-0:1.0: unable to enumerate USB device on port 4
usb 4-5: new high speed USB device using ehci_hcd and address 3
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
usb 4-5: configuration #1 chosen from 1 choice
usb 6-2: new low speed USB device using uhci_hcd and address 2
usb 6-2: configuration #1 chosen from 1 choice
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
tg3.c:v3.91 (April 18, 2008)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:0a:e4:c8:b4:91
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23k
iwl4965: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:04:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 4965AGN
iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
phy0: Selected rate control algorithm 'iwl-4965-rs'
ACPI: PCI interrupt for device 0000:04:00.0 disabled
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: PCI Interrupt 0000:01:00.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:01:00.1 to 64
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 7FED7DE7, 0227 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 7FED7778, 05EA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: SSDT 7FED800E, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 7FED7D62, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
Marking TSC unstable due to: TSC halts in idle.
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (60 C)
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (62 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
Linux agpgart interface v0.103
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Symbol init_mm is marked as UNUSED, however this module is using it.
This symbol will go away in the future.
Please evalute if this is the right api to use, and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
[fglrx] Adapter chains initialized successfully!
[fglrx] CF object manager initialized successfully!
[fglrx] vendor: 1002 device: 9581 count: 1
[fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.49.7 [May 12 2008] with 1 minors
ACPI: WMI: Mapper loaded
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
ACPI: device:05 is registered as cooling_device2
input: Video Bus as /class/input/input5
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /class/input/input6
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
usbcore: registered new interface driver hiddev
input: Logitech Trackball as /class/input/input7
Linux video capture interface: v2.00
input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.1-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
uvcvideo: Found UVC 1.00 device Lenovo Easy Camera (5986:0200)
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
input: PC Speaker as /class/input/input8
input: Lenovo Easy Camera as /class/input/input9
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:0e:09.1 [1180:0822] (rev 22)
ACPI: PCI Interrupt 0000:0e:09.1[b] -> GSI 18 (level, low) -> IRQ 18
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r211)
sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI at 0xf4300800 irq 18 DMA
ACPI: PCI Interrupt 0000:0e:09.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f4300000-f43007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000
input: SynPS/2 Synaptics TouchPad as /class/input/input10
Clocksource tsc unstable (delta = -207945050 ns)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[07e40a0001032048]
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2000052k swap on /dev/sda1. Priority:-1 extents:1 across:2000052k
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[fglrx] Reserved FB block: Shared offset:0, size:0
[fglrx] Reserved FB block: Unshared offset:ff7b000, size:0
[fglrx] Reserved FB block: Unshared offset:fffc000, size:0
[fglrx] interrupt source 10000000 successfully enabled
[fglrx] enable ID = 0x00000006
[fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[fglrx] interrupt source 60000001 successfully enabled
[fglrx] enable ID = 0x00000007
[fglrx] Receive enable interrupt message with irqEnableMask: 60000001
[fglrx] interrupt source 00000040 successfully enabled
[fglrx] enable ID = 0x00000008
[fglrx] Receive enable interrupt message with irqEnableMask: 00000040
[fglrx] interrupt source ff00002c successfully enabled
[fglrx] enable ID = 0x00000009
[fglrx] Receive enable interrupt message with irqEnableMask: ff00002c
[fglrx] interrupt source ff00002d successfully enabled
[fglrx] enable ID = 0x0000000A
[fglrx] Receive enable interrupt message with irqEnableMask: ff00002d
[fglrx] interrupt source 20000400 successfully enabled
[fglrx] enable ID = 0x0000000B
[fglrx] Receive enable interrupt message with irqEnableMask: 20000400
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100002, writing 100006)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:1d:0f:93:50:14
wlan0: RX authentication from 00:1d:0f:93:50:14 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:1d:0f:93:50:14
wlan0: RX AssocResp from 00:1d:0f:93:50:14 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:1d:0f:93:50:14)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:1d:0f:93:50:14
wlan0: RX authentication from 00:1d:0f:93:50:14 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:1d:0f:93:50:14
wlan0: RX ReassocResp from 00:1d:0f:93:50:14 (capab=0x431 status=0 aid=1)
wlan0: associated
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Shanghai"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=(tg3 iwl4965 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="l33t1"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
# interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(!netfs crond syslog-ng @mysqld !laptop-mode @network @openntpd)
# End of file
Any ideas? I'd appreciate any light you can shead on the isssue -
Admincm.cmd cant open on PCM and schedule tab drop down disabled
I installed PCM 13 successfully and did not received any error, MSServer 2008 was installed including all database. Im running also the PCM without any problem in internet explorer, admin and user logon. PCM is working fine except on connection from PCM-P6. I did configured the P6 and its fine. but on PCM, when i right click on the project title for project settings, the schedule tab is disbaled on schedule where supposed to have a drop down list. I check all the forums and it says that it can be configured using the adminmc.cmd that can be seen at the contract management installation folder. but even the admincm.cmd cant open. it just open a dos window but close for about 1 second. I tried to capture the image for you to see it
http://i149.photobucket.com/albums/s59/blade052003/PMCPROB.png
can anyone help me?
thanks in advancecan anyone help me on this?did i missed something???
-
Work Manager Installation Problem
Hi Experts,
I'm currently installing PCM Version 7.5 on Windows 2008 R2 with MS SQL Server 2008.
This installation is for a demonstration system, and has all components (database, Application Server, Web Server, etc) installed on one host.
The database has installed successfully and the Msschema script has also ran successfully.
I have been able to install the Primary Application server successfully too.
I am having some difficulty with installing the Work Manager, as follows:
In the Work Manager Options screen (for reference, page 39, point 14 to 18 of the installation guide), I have entered the details as requested by the installation guide.
I have checked that the account entered is the correct administrators account and password (logged on to OS using them), I have checked that the SMTP server and port are correct and have provided the correct path for temporary storage.
The error message that I receive when selecting next is:
Invalid Workflow User - Unable to Login
Invalid Username or Password
When referring back to the guide, the entry (point 14) is:
In the "Work Manager Options" screen, enter an Administrator user name and password in the User
Name and Password text boxes.
I can't account for why this is not working - it is a current administrator account that I am using and the guide asks me to enter it.
Has anyone had this issue before, what did you do to overcome it?
Thanks and regards,
ChrisFirst time configuration requires use of PCM administrator account. The username and password are administrator (lower case). Afterwards you can log into PCM Model Builder and change the credentials.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team -
EPM V10 issue : Install conflict between PCM 10 & BPC 10
Our team is working on a prototype of EPM 10 solution (BPC 10 & PCM 10). We have met 2 conflicts between BPC 10 and PCM 10 at client side (Excel & Internet Explorer):
1. There are 2 separate EPM Add-in for Microsoft Office (Excel). One for BPC and another for PCM. We should install EPM Add-in PCM at first, otherwise we can't install it after BPC. Obviously EPM Add-in for PCM is a previous version refering to that of BPC.
But after installation of EPM Add-in PCM then BPC, we lost the "Data Manager" tab in Excel ribbon.
2. After installation PCM 10, we canu2019t access BPC via Internet Explorer any more. IE shows u201CAdd-on can not work u2026u201D. But we can open BPC Web client via Chrome. Is there any conflict of the ActiveX between PCM & BPC for IE ?
Thank you for any proposition & solution.
Kind regards,Maybe I don't understand your description of the problem clearly, but I want to state that there is intended to be only 1 EPM 10.0 add-in for Excel which works with both BPC and PCM.
Also since both the products you mention are in Ramp-Up currently, feel free to reach out to your customers ramp-up coach(es) to assist further.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team -
Alsa problem: PCM channel cannot be muted
I have a strange problem. I decided to reinstall archlinux and notice that i can't mute PCM channel. In my previous installation i had that option.
snd_hda_intel 357048 4
snd_seq_oss 31872 0
snd_seq_midi_event 8192 1 snd_seq_oss
snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 8332 2 snd_seq_oss,snd_seq
snd_hwdep 8964 1 snd_hda_intel
snd_pcm_oss 40192 0
snd_pcm 69636 3 snd_hda_intel,snd_pcm_oss
snd_timer 21384 3 snd_seq,snd_pcm
snd_page_alloc 9608 2 snd_hda_intel,snd_pcm
snd_mixer_oss 16512 1 snd_pcm_oss
snd 50724 15 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 8032 1 snd
$ amixer
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 127
Mono: Playback 118 [93%] [-6.75dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 240 [94%] [-3.00dB]
Front Right: Playback 240 [94%] [-3.00dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 127
Mono:
Front Left: Playback 115 [91%] [-9.00dB] [on]
Front Right: Playback 115 [91%] [-9.00dB] [on]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Analog Loopback',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Digital Input Source',0
Capabilities: enum
Items: 'Analog Inputs' 'Digital Mic 1'
Item0: 'Analog Inputs'
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic'
Item0: 'Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Mic'
Item0: 'Mic'
Simple mixer control 'Mux',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'Mux',1
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
$ pacman -Q | grep alsa
alsa-lib 1.0.17a-1
alsa-oss 1.0.15-1
alsa-utils 1.0.17-1
Anyone had that strage problem?I found out a way of adding a mute switch to controls.
pcm.Audigy {
type hw
card 0
pcm.!default {
type softvol
slave.pcm "Audigy"
control {
name "PCM"
card 0
resolution 2
I don't know if this is "correct," but I could add the capability for both my Master and PCM channels (not at the same time though). -
Best way to clone a installation
Hi
I installed and configured arch on an older machine and now would like to clone the installation (mostly because all the mail settings, etc) to a different machine... my plan was to install the basic installtion from a live cd and then copy all files from the old / .
I know there are certain files than are machine specifiic eg. /etc/fstab, the extlinux loader file etc...
so I tried to copy everything but these machine specific files, but that ruined the installation so I guess I am doing something wrong. Is there an easier way to clone the setup or did I just miss a specific file?
Does anyone have experience in this issue?
regards,
keen
Last edited by keen90 (2011-09-03 23:38:26)The user issue is fine now.
I used an external hard drive to copy my old installations data and did not use
cp -ar
so the permissions were missing. I fixed that.
I'll post my /var/log messages in a couple of minutes.
One more thing. I am a bit worried about the system I tried a pacman update und had these messages:
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
error: duplicated database entry 'iproute2'
error: duplicated database entry 'iana-etc'
error: duplicated database entry 'usbutils'
error: duplicated database entry 'syslog-ng'
error: duplicated database entry 'binutils'
error: duplicated database entry 'file'
error: duplicated database entry 'device-mapper'
error: duplicated database entry 'gcc-libs'
error: duplicated database entry 'mkinitcpio-busybox'
error: duplicated database entry 'module-init-tools'
error: duplicated database entry 'readline'
error: duplicated database entry 'glibc'
error: duplicated database entry 'cronie'
error: duplicated database entry 'pcmciautils'
error: duplicated database entry 'pcre'
error: duplicated database entry 'psmisc'
error: duplicated database entry 'syslinux'
error: duplicated database entry 'coreutils'
error: duplicated database entry 'libgcrypt'
error: duplicated database entry 'initscripts'
error: duplicated database entry 'tzdata'
error: duplicated database entry 'zlib'
error: duplicated database entry 'linux-api-headers'
error: duplicated database entry 'util-linux'
error: duplicated database entry 'less'
error: duplicated database entry 'dbus-core'
error: duplicated database entry 'pacman-mirrorlist'
error: duplicated database entry 'grep'
error: duplicated database entry 'grub'
error: duplicated database entry 'pam'
error: duplicated database entry 'libcap'
error: duplicated database entry 'heirloom-mailx'
error: duplicated database entry 'perl'
error: duplicated database entry 'logrotate'
error: duplicated database entry 'mkinitcpio'
error: duplicated database entry 'wget'
error: duplicated database entry 'dash'
error: duplicated database entry 'cryptsetup'
error: duplicated database entry 'lvm2'
error: duplicated database entry 'gmp'
error: duplicated database entry 'db'
error: duplicated database entry 'libgpg-error'
error: duplicated database entry 'mdadm'
error: duplicated database entry 'filesystem'
error: duplicated database entry 'pacman'
error: duplicated database entry 'procps'
error: duplicated database entry 'shadow'
error: duplicated database entry 'run-parts'
error: duplicated database entry 'udev'
error: duplicated database entry 'gawk'
error: duplicated database entry 'diffutils'
error: duplicated database entry 'linux-firmware'
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Remove (1): kernel26-2.6.38.8-1
Total Removed Size: 52.11 MB
Targets (35): zlib-1.2.5-4 binutils-2.21.1-2 shadow-4.1.4.3-2 libcap-2.22-1 coreutils-8.12-3 cronie-1.4.8-1 gcc-libs-4.6.1-4 db-5.2.28-1 iana-etc-2.30-2 filesystem-2011.08-1 dbus-core-1.4.14-1 diffutils-3.1-1 file-5.08-1 gawk-4.0.0-1 pcre-8.13-2 grep-2.9-1 grub-0.97-20 heirloom-mailx-12.5-2 imlib2-1.4.5-1 module-init-tools-3.16-1 udev-173-3 iproute2-2.6.39-1 initscripts-2011.07.3-1 linux-firmware-20110822-1 linux-3.0.4-1 less-444-1 libgcrypt-1.5.0-1 linux-api-headers-3.0.1-1 mdadm-3.2.2-3 mkinitcpio-busybox-1.18.5-1 pacman-mirrorlist-20110816-1 psmisc-22.14-1 syslinux-4.04-2 syslog-ng-3.2.4-3 usbutils-004-1
Total Download Size: 0.00 MB
Total Installed Size: 165.15 MB
checking package integrity...
checking for file conflicts...
binutils: /usr/lib/libbfd-2.21.1.20110627.so exists in filesystem
binutils: /usr/lib/libopcodes-2.21.1.20110627.so exists in filesystem
shadow: /usr/share/licenses/shadow/LICENSE exists in filesystem
libcap: /lib/libcap.so.2.22 exists in filesystem
db: /usr/bin/db_tuner exists in filesystem
db: /usr/lib/libdb-5.2.a exists in filesystem
db: /usr/lib/libdb-5.2.so exists in filesystem
db: /usr/lib/libdb_cxx-5.2.a exists in filesystem
db: /usr/lib/libdb_cxx-5.2.so exists in filesystem
dbus-core: /usr/lib/libdbus-1.so.3.5.7 exists in filesystem
dbus-core: /usr/share/doc/dbus/dbus-faq.html exists in filesystem
dbus-core: /usr/share/doc/dbus/dbus-specification.html exists in filesystem
dbus-core: /usr/share/doc/dbus/dbus-test-plan.html exists in filesystem
dbus-core: /usr/share/doc/dbus/dbus-tutorial.html exists in filesystem
dbus-core: /usr/share/doc/dbus/diagram.png exists in filesystem
dbus-core: /usr/share/doc/dbus/diagram.svg exists in filesystem
dbus-core: /usr/share/doc/dbus/system-activation.txt exists in filesystem
diffutils: /usr/share/info/diffutils.info.gz exists in filesystem
gawk: /bin/gawk-4.0.0 exists in filesystem
gawk: /usr/bin/dgawk exists in filesystem
gawk: /usr/bin/pgawk-4.0.0 exists in filesystem
gawk: /usr/share/awk/quicksort.awk exists in filesystem
gawk: /usr/share/awk/walkarray.awk exists in filesystem
gawk: /usr/share/locale/fi/LC_MESSAGES/gawk.mo exists in filesystem
module-init-tools: /usr/share/man/man5/depmod.d.5.gz exists in filesystem
module-init-tools: /usr/share/man/man5/modules.dep.bin.5.gz exists in filesystem
udev: /lib/libudev.so.0.12.0 exists in filesystem
udev: /lib/modprobe.d/framebuffer_blacklist.conf exists in filesystem
udev: /lib/udev/accelerometer exists in filesystem
udev: /lib/udev/rules.d/61-accelerometer.rules exists in filesystem
udev: /lib/udev/rules.d/70-udev-acl.rules exists in filesystem
iproute2: /etc/iproute2/group exists in filesystem
initscripts: /etc/logrotate.d/bootlog exists in filesystem
initscripts: /usr/lib/initscripts/arch-tmpfiles exists in filesystem
initscripts: /usr/lib/tmpfiles.d/arch.conf exists in filesystem
linux-firmware: /lib/firmware/ar3k/30101coex/PS_ASIC.pst exists in filesystem
linux-firmware: /lib/firmware/ar3k/30101coex/PS_ASIC_aclHighPri.pst exists in filesystem
linux-firmware: /lib/firmware/ar3k/30101coex/PS_ASIC_aclLowPri.pst exists in filesystem
linux-firmware: /lib/firmware/ar3k/30101coex/RamPatch.txt exists in filesystem
linux-firmware: /lib/firmware/ar3k/30101coex/ar3kbdaddr.pst exists in filesystem
linux-firmware: /lib/firmware/ath6k/AR6003.1/hw2.1.1/athwlan.bin exists in filesystem
linux-firmware: /lib/firmware/ath6k/AR6003.1/hw2.1.1/bdata.SD31.bin exists in filesystem
linux-firmware: /lib/firmware/ath6k/AR6003.1/hw2.1.1/bdata.SD32.bin exists in filesystem
linux-firmware: /lib/firmware/ath6k/AR6003.1/hw2.1.1/bdata.WB31.bin exists in filesystem
linux-firmware: /lib/firmware/ath6k/AR6003.1/hw2.1.1/data.patch.bin exists in filesystem
linux-firmware: /lib/firmware/ath6k/AR6003.1/hw2.1.1/endpointping.bin exists in filesystem
linux-firmware: /lib/firmware/ath6k/AR6003.1/hw2.1.1/otp.bin exists in filesystem
linux-firmware: /lib/firmware/bnx2x/bnx2x-e1-7.0.20.0.fw exists in filesystem
linux-firmware: /lib/firmware/bnx2x/bnx2x-e1-7.0.23.0.fw exists in filesystem
linux-firmware: /lib/firmware/bnx2x/bnx2x-e1h-7.0.20.0.fw exists in filesystem
linux-firmware: /lib/firmware/bnx2x/bnx2x-e1h-7.0.23.0.fw exists in filesystem
linux-firmware: /lib/firmware/bnx2x/bnx2x-e2-7.0.20.0.fw exists in filesystem
linux-firmware: /lib/firmware/bnx2x/bnx2x-e2-7.0.23.0.fw exists in filesystem
linux-firmware: /lib/firmware/cis/src/3CCFEM556.cis exists in filesystem
linux-firmware: /lib/firmware/cis/src/3CXEM556.cis exists in filesystem
linux-firmware: /lib/firmware/cis/src/COMpad2.cis exists in filesystem
linux-firmware: /lib/firmware/cis/src/COMpad4.cis exists in filesystem
linux-firmware: /lib/firmware/cis/src/DP83903.cis exists in filesystem
linux-firmware: /lib/firmware/cis/src/LA-PCM.cis exists in filesystem
linux-firmware: /lib/firmware/cis/src/MT5634ZLX.cis exists in filesystem
linux-firmware: /lib/firmware/cis/src/NE2K.cis exists in filesystem
linux-firmware: /lib/firmware/cis/src/PCMLM28.cis exists in filesystem
linux-firmware: /lib/firmware/cis/src/PE-200.cis exists in filesystem
linux-firmware: /lib/firmware/cis/src/PE520.cis exists in filesystem
linux-firmware: /lib/firmware/cis/src/RS-COM-2P.cis exists in filesystem
linux-firmware: /lib/firmware/cis/src/tamarack.cis exists in filesystem
linux-firmware: /lib/firmware/dvb-usb-terratec-h5-drxk.fw exists in filesystem
linux-firmware: /lib/firmware/ene-ub6250/ms_init.bin exists in filesystem
linux-firmware: /lib/firmware/ene-ub6250/ms_rdwr.bin exists in filesystem
linux-firmware: /lib/firmware/ene-ub6250/msp_rdwr.bin exists in filesystem
linux-firmware: /lib/firmware/ene-ub6250/sd_init1.bin exists in filesystem
linux-firmware: /lib/firmware/ene-ub6250/sd_init2.bin exists in filesystem
linux-firmware: /lib/firmware/ene-ub6250/sd_rdwr.bin exists in filesystem
linux-firmware: /lib/firmware/libertas/cf8381.bin exists in filesystem
linux-firmware: /lib/firmware/libertas/cf8381_helper.bin exists in filesystem
linux-firmware: /lib/firmware/libertas/lbtf_sdio.bin exists in filesystem
linux-firmware: /lib/firmware/libertas/lbtf_usb.bin exists in filesystem
linux-firmware: /lib/firmware/libertas/usb8388_olpc.bin exists in filesystem
linux-firmware: /lib/firmware/radeon/SUMO2_me.bin exists in filesystem
linux-firmware: /lib/firmware/radeon/SUMO2_pfp.bin exists in filesystem
linux-firmware: /lib/firmware/radeon/SUMO_me.bin exists in filesystem
linux-firmware: /lib/firmware/radeon/SUMO_pfp.bin exists in filesystem
linux-firmware: /lib/firmware/ti-connectivity/wl127x-fw-3.bin exists in filesystem
linux-firmware: /lib/firmware/ti-connectivity/wl127x-fw-plt-3.bin exists in filesystem
linux-firmware: /lib/firmware/ti-connectivity/wl127x-nvs.bin exists in filesystem
linux-firmware: /lib/firmware/ti-connectivity/wl128x-fw-3.bin exists in filesystem
linux-firmware: /lib/firmware/ti-connectivity/wl128x-fw-plt-3.bin exists in filesystem
linux-firmware: /lib/firmware/ti-connectivity/wl128x-nvs.bin exists in filesystem
linux-firmware: /lib/firmware/ti-connectivity/wl12xx-nvs.bin exists in filesystem
linux-firmware: /usr/share/licenses/linux-firmware/LICENCE.OLPC exists in filesystem
linux-firmware: /usr/share/licenses/linux-firmware/LICENCE.ene_firmware exists in filesystem
libgcrypt: /lib/libgcrypt.so.11.7.0 exists in filesystem
libgcrypt: /usr/share/info/gcrypt.info-1.gz exists in filesystem
linux-api-headers: /usr/include/linux/media.h exists in filesystem
linux-api-headers: /usr/include/linux/mmc/ioctl.h exists in filesystem
linux-api-headers: /usr/include/linux/netfilter/ipset/ip_set.h exists in filesystem
linux-api-headers: /usr/include/linux/netfilter/ipset/ip_set_bitmap.h exists in filesystem
linux-api-headers: /usr/include/linux/netfilter/ipset/ip_set_hash.h exists in filesystem
linux-api-headers: /usr/include/linux/netfilter/ipset/ip_set_list.h exists in filesystem
linux-api-headers: /usr/include/linux/netfilter/xt_AUDIT.h exists in filesystem
linux-api-headers: /usr/include/linux/netfilter/xt_addrtype.h exists in filesystem
linux-api-headers: /usr/include/linux/netfilter/xt_devgroup.h exists in filesystem
linux-api-headers: /usr/include/linux/netfilter/xt_set.h exists in filesystem
linux-api-headers: /usr/include/linux/netfilter/xt_socket.h exists in filesystem
linux-api-headers: /usr/include/linux/omap3isp.h exists in filesystem
linux-api-headers: /usr/include/linux/ptp_clock.h exists in filesystem
linux-api-headers: /usr/include/linux/usb/functionfs.h exists in filesystem
linux-api-headers: /usr/include/linux/uvcvideo.h exists in filesystem
linux-api-headers: /usr/include/linux/v4l2-mediabus.h exists in filesystem
linux-api-headers: /usr/include/linux/v4l2-subdev.h exists in filesystem
linux-api-headers: /usr/include/rdma/ib_user_cm.h exists in filesystem
linux-api-headers: /usr/include/rdma/ib_user_sa.h exists in filesystem
linux-api-headers: /usr/include/rdma/ib_user_verbs.h exists in filesystem
linux-api-headers: /usr/include/rdma/rdma_netlink.h exists in filesystem
linux-api-headers: /usr/include/rdma/rdma_user_cm.h exists in filesystem
syslog-ng: /lib/systemd/system/syslog-ng.service exists in filesystem
Errors occurred, no packages were upgraded.
Last edited by keen90 (2011-09-04 16:49:15) -
Hi,
Can anyone please share information on their PCM system sizing in this thread? I have tried to locate information on PCM performance benchmarks but none seem to be available. Moreover, there is no published sizing formula available which we can use to collect information and convert it into numbers.
We have been suggested the following system sizing by one of the partners:
Application: 4 quad cores (16 cores) 32gb ram standard hard disk 500gb
Database: 2 quad core San storage 500gb expandable
Web servers: 1 quad core 16gb ram hard disk not relevant
We are going to run 3 models on these servers. We'll have 1 Primary and 2 Secondary servers. The Secondary Model servers will do the actual work, Primary won't be allocated any models.
What is your experience?
Thanks and regards,
ShehryarI work for Troygroup. Pete's question has a very simple answer. If this is Windows 7, disable UAC. You can re-enable UAC once the PCM files are installed.
If this is Windows 8, it is a bit trickier. In addition to UAC you must also click on an administration button (with the shield icon) from within the driver. I usually click the one under the sharing tab in the driver, however this requires printer sharing to be turned off in order to see this button.
If you run into this problem on Windows 8 and have trouble send me an email: [email protected]
The best way to install Troys fonts as of 2014 is to use the MICR Printer Installer that we put together. It disables UAC, installs a printer and the PCM files. You can get this from the Troygroup website.
Maybe you are looking for
-
i just got my zen micro on Friday night, and it's dri'ven me to so much frustration that I'm about ready to sell it off after just 2 days and swtich to iPod instead. st thing i got it on Friday was to charge it up fully and started loading songs. Who
-
HT201210 solution for resolving 1015 error?
an error 1015is ocuring at the end of updating iphone 3g. how to resolve errorr??? plxx need help..
-
Installing J2SE 5.0 on OSX 10.4
Just had a quick question. I've downloaded and installed 5.0 on my new powerbook, but terminal is still running 1.4.2. I found the java settings application and changed the default version to 5.0, but that seems to have done little to no good. And i'
-
Ve this error message when trying to load itunes how can I resolve it,
Runtime Error Program:C:\Program Files(x86)iTunes\iTunes.exe R6034 An applicationhas made an attempt to load the C runtime library in corectly.
-
I search the download Photoshop version for MC OS X 10.5.8
Is it possible to find the trial version for this operative system? My computer doesn't support newer versions. Thanks for your reply. archcalo.