Installation of Platform Agent
Hello,
We have a Redwood scheduler configured on SAP system(AIX+Oracle, only Java Stack)
Now we are trying to install the "Platform Agent Installation - Version 0_26_6" on another server to act as a client to the Redwood Scheduler.
The platform agent installation script asks for Server Port number. I do not know which port would the Redwood Server use to communicate with the Platform Agent.
Kindly help.
Edited by: Gautam Poddar on Mar 4, 2009 10:17 AM
Hi Gautam,
Port 1555 is the default port for the platform agent to listen to connections from the CPS repository.
Port 5xx00 is the port you need if you want the platform agent to register itself with the CPS repository during installation.
Regards,
Anton.
Similar Messages
-
How to publish list of "other" (ie, Solaris) platform agent deployments
In the Deployments section of EM, how does one publish new platform agent downloads ($OMS_HOME/sysman/agent_download/10.2.0.1.0/linux)? I have followed the instructions in "Uploading Agent Installation Software for Different Platforms, Deploying the Management Agent, Oracle® Enterprise Manager Grid Control Installation and Basic Configuration", but so far, no dice.
We have the OMS 10.2.0.1 running on Linux and received the instructions to install Patch 4645135. This should be the solution to get the platform entries to the drop-down list for all the platforms installed in agent_download/<version>/<platform>.
However, it doesn´t list my 10.2.0.1/hpi subdirectory for HP-UX Itanium. SR is being worked on.
Regards,
Martin -
Hi all,
Have you seen something similar before?
Alert: Management Software Failed
Source: IBM Director Platform Agent (Core Services, or Level-1 Agent)
Thanks in advance
JoseHi,
I would like to suggest you upgrade the IBM Director agent along with updating the
SCOM IBM Hardware
Management Pack.
And for this kind of issue, we should contact IBM Vendors. As the MP is designed by them, and they are more familar with IBM product.
Regards,
Yan Li
Regards, Yan Li -
Installation audit vault agent with RAC configuration
Hi at all,
I have a question about the installation of the agent on the RAC configuration. Where must I install the Audit vault agent, on all RAC nodes or is there a properly configuration?
Thanks
VincenzoBy default when you install the agent on any single node the installation recognizes that it is a cluster and presents you with a list of available nodes from which to select.
With a RAC cluster you have one database and multiple instances. All instances will write to one, and only one AUD$ and FGA_LOG$ table so if you are using database auditing one node will suffice. Which node that is though depends on knowing which node is up at any one time so you could potentially choose a node that is dropped from the cluster or is down for patching and maintenance while the cluster is still running. With respect to REDO collection each node has its own redo thread so you definitely need to be collecting from every node.
Audit Vault has not been out long enough that I can tell you from experience what might be defined as "best practice" and often what we really need to study is "worst practice" to know what not to do. But in the case of RAC my instinct would be to first determine the collection type(s) and then decide. Erring on the side of collecting from all nodes makes a lot of sense. -
SunMC 3.6.1, Platform Agent Deletion Error!!
hi all,
now i'm testing SunMC 3.6.1.
i installed SunMC server on Ultra25 and agent on E6900.
i tried to install "Sun Fire Midrange Systems Platform Administration" add on product and created "Multiple Platform Agent Instances" on Ultra25. below procedure issued completely.
# /opt/SUNWsymon/sbin/es-platform �a SC
# /opt/SUNWsymon/sbin/es-stop �a
# cd /opt/SUNWsymon/addons/SunFirePltAdmin/sbin
# ./es-setup.sh �I SC
# /opt/SUNWsymon/sbin/es-start �y SC
and i tried to undo the Setup of a Sun Fire Midrange Systems Platform Administration Instance and delete a Platform Agent.
below procedure issued completely.
# ./es-setup.sh -u -I SC
but i can't delete Platform Agent. below script create error.
# /opt/SUNWsymon/sbin/es-platform �d SC
how can i delete Multiple Platform Agent Instances?
can some help me plz
thanks...Hi,
Just to clarify my situation in regards to what have been said.
I'm running Solaris 10 6/06 with update 2 as seen by output from my system, an old lady that listens to the name 'Enterprise 450'. I just downloaded the 3.6.1 SMC from Sun the other day. I was trying to install it on the very same machine.
I googled around a little and stumbled upon this thread and thought that this may be the same problem. Haven't looked any deeper into this since it is my test system and i felt OK with the answer given.
Anyway, seems a little odd from SUN's part not supporting this on their own system.
What HW are you running and in which config?
Regards,
Pierre -
Platform agent does not working after installing SMS 1.5
Good time of the day to everybody,
I'm using SunMC 3.6 to monitor SFE25K. After upgrading SMS version to 1.5 platform agent on SC crashes after few minutes of running. In the log files I see only "[ID 603404 kern.notice] NOTICE: core_log: esd[23533] core rlimit is zero, core not dumped" in the messages file. At the same time ConfigReader works fine.
I can't find any patches or documents related to this problem at sunsolve. Does anybody knows how to make the agent to work? 'es-setup -F' does not helps.
thanksIn addition, process crashes with following:
Incurred fault #5, FLTACCESS %pc = 0xFF147648
siginfo: SIGBUS BUS_ADRALN addr=0x6E65742F
Received signal #10, SIGBUS [default]
siginfo: SIGBUS BUS_ADRALN addr=0x6E65742F -
Do I need to set permisions to have full access to the platform agent?
I am getting "Insufficient security privilege to load console info".
I can do anythinf to the host agent but not the platform agent, config reader.
Thanksdone
-
Hi comnunity,
actually I'm testing CPS features on a test SAP environment.
I've installed a Platform agent in a SAP AS in order to test the file events.
Now I cannot contact Platform Agent from CPS because of an error regarding parameter: SwitchUserCommand
I tried to set these different vaues:
sudo -u $The specified item was not found. -c $
But I get the same error:
Service "PlatformAgentService" on process server "TEP_bitter_PlatformAgent_ProcessServer" stopped unexpectedly.
Details:
JCS-116010: Platform agent reports: Configuration failed; see operator messages
CPS and SAP system is HP-UX 11.xx.
Do you know which is a valid sudo string?
Thanks
Giovanni LippolisHi,
Have you tried any of the other security options, or tried to use the system default again ?
You can change or reset the security setup by running the command "rca" from your agent binaries directory.
By default, the SwitchUserCommand parameter is not set if I recall correctly, so you can also try to remove this parameter setting on the process server and see if the default works.
Regards,
Anton. -
CPS - Redwood : Error JCS-108003 on an unix platform agent
Hi,
I get the following error message u201CJCS-108003: No backends could retrieve the specified jobfile (ID: 664,788); failure possibly transient.u201D
while running a CPS job on a unix platform agent. Even the command "ls" return that message.
Could someone help, pls.Hi,
jobs are running now on the platform agent. It was a problem on the security tab of the PA.
I grant rights to my redwood user and it works after reboot of the PA.
I'm now dealing with this error below :
"/home/redwood/agent/var/SAP_RW0_41/PI-DEV/jobs/71565/run_KSH[120]: ./: 0403-006 Execute permission denied"
eXecute rights is ok on the scripts of the unix target server.
Re. -
Silent installation of Cloud agent 12c failed on a windows 2003 host
Hello All,
I've done multiple installations by silently installing the cloud agent 12c using a response file. However, the configuration portion failed on this one windows 2003 host.
Has anyone seen this? I've searched on metalink and see other problems like TZ, service already exists, incorrect PERL settings etc..but found nothing that helps so far.
In log file:
The action configuration is performing
The plug-in Agent Configuration Assistant is running
AgentConfiguration:agent configuration has been started
Validating OMS_HOST and EM_UPLOAD_PORT
Performing free port detection..
AgentConfiguration: Executing emctl deploy agent command...
AgentConfiguration:agent configuration finished with status = false
The plug-in Agent Configuration Assistant has failed its perform method
The action configuration has failed its perform method
In Agent Deploy log file:
value passed to dir splitC:/oracle/em/agent_inst
INFO: length of temp is2
INFO: Return value:C:
\/oracle/em/agent_inst
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The
Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh
monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent
software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in,
if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-
in, view the plug-in deployment log C:\oracle\em\agent_inst\install\logs to check if the plug-in
configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode
finished for action: configure
INFO:
INFO: You can see the log file: C:\oracle\em\core
\12.1.0.3.0\cfgtoollogs\oui\configActions2013-12-23_11-07-08-AM.log
INFO:
INFO: C:\oracle\em>exit
/b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\oracle\em\core\12.1.0.3.0\oui\bin
\runConfig.bat ORACLE_HOME=C:\oracle\em\core\12.1.0.3.0 RESPONSE_FILE=C:\oracle\em\core
\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML=
{oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent
Configuration Failed
SEVERE: ERROR: Agent Deployment FailedThanks for the reply Rahul.
I've used that same response file for deployments on other servers without any problem.
See response file below: (note i've changed the server name)
## copyright (c) 1999, 2012 Oracle. All rights reserved. ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## Each variable is associated with a comment. The comment ##
## identifies the variable type. ##
## Please specify the values in the following format: ##
## Type Example ##
## String "Sample Value" ##
## Boolean True or False ##
## Number 1000 ##
## StringList {"String value 1","String Value 2"} ##
## The values that are given as <Value Required> need to be ##
## specified for a silent installation to be successful. ##
## This response file is generated by Oracle Software ##
## Packager. ##
RESPONSEFILE_VERSION=2.2.1.0.0
#OMS_HOST:<String> OMS host info required to connect to OMS
#EM_UPLOAD_PORT:<String> OMS port info required to connect to OMS
#AGENT_REGISTRATION_PASSWORD:<String> Agent Registration Password needed to
# establish a secure connection to the OMS.
#AGENT_INSTANCE_HOME:<String> Agent instance home is the location of agent state directory.
#AGENT_PORT:<String> Agent port on which the agent process should be started.
#b_startAgent:<boolean> Agent will not be started after configuration if the value specified is false.
#ORACLE_HOSTNAME:<String> Fully qualified domain name of host where is the agent is deployed.
#s_agentHomeName:<String>Customized Oracle home name for the agent home. Example: s_agentHomeName="agent12gR1"
OMS_HOST="omshost.company.com"
EM_UPLOAD_PORT="1159"
AGENT_REGISTRATION_PASSWORD="complicatedpassword"
AGENT_INSTANCE_HOME="e:/oracle/em/agent_inst"
AGENT_PORT="3872"
b_startAgent=true
ORACLE_HOSTNAME="targetserver.company.com"
#s_agentHomeName=<Value Unspecified>
#s_agentSrvcName:<String> Sets the agent Service Name and this variable can be
# used to overrite the agent service name calculated by the install. This is
# required for only Windows.
# Example:
# s_agentSrvcName = "GridAgent" ; User specified value
#s_agentSrvcName=""
#Please Don't change the values of these variables
#EM_INSTALL_TYPE:<STRING> install type
EM_INSTALL_TYPE="AGENT" -
Installation of Introscope Agent
Hi!
I would like to install Introscope Agent.
Neither the manual installation nor the installation via Setup Introscope Agent was succesfull.
case a) automatic installation via SMD Wizard
The erros of installation with SMD Wizard (Setup Introscope Agent):
The landscape definition of selected system is empty.
Operation has been aborted
case b) manual installation (uncar the file ISAGENT71...SAR)
With the manual installation of Setup Introscope Agent ISAGENT71*.SAR I have the following problem:
No folder /usr/sap/ccms/wily/logs exist
If I add Java settings in Config Tool, restart the system and open the file d:\usr\sap\<SID>\<instance>\j2ee\cluster\instance.properties
I can not find any entries added before.
Thank you for any helpful information
regards
ThomAgain case a)
Please verify your definition, and also you need to have the previous Managed Setup Wizard run successfully.
case b) I would not recommend it.
Best Regards,
Frederic -
Installation Oracle Management Agent 11g in Linux
Hi,
I am Arun From India..
I am planning to Install Oracle management Agent 11g in a Linux (5.5 32-bit) Server...But I saw many methods in Website to Install........
Please help me to select the Easy method to Install Oracle Management Agent and Please bring the document to Install Management Agent......
Could you specify how can we Configure the DATABASE with AGENT.....?????????????
Please help me........Hope your Support........
Arun KurungattHi slatterych,
Thanks for your Valuable Support and Comments...I have some Doubts before Installation.
I am going to Install Agent on Server-2 , which contains Oracle DB 11g only now ( No Grid Control )..So What are the Things I need to perform in Server-2 while installing Agent (Silent mode)??? Is That same like which you Sent???
Already I have Installed OEMGC in Server-1.. How can I connected Agent from Server-2 to OEMGC (Server-1)????
Should I add OMS details of Server-1 in additional_agent.rsp ( Server-2 ) before installing Agent????
Hope your Support...Please
Arun Kurungatt -
Correct installation of IIS agent?
Hi,
After installing a policy agent 2.0 for IIS 5.0, I don't have an amagent dir at the IIS docroot. is this normal? Or do you have this dir with working installation?
thankshi there,
IIS will be installed by default on windows 2003 operating system , to open IIS , please use start --> run --> inetmgr. or start --> programs--> administrative tools --> IIS manager.
in order to install additional components you need to have i386 folder. you can navigate to c:\windows\i386 folder.
please use the below link to download windows 2003 sp2
http://www.microsoft.com/downloads/details.aspx?familyid=1B9FE9E4-1D57-4698-A5CF-DB271ED6D90A&displaylang=en
sainath
!analyze -
Windows Installer for Platform
Hello,
On Windows, does the WebLogicPlatform use
the Windows Installer Service for installation?
Are product and patches MSI based?
If not, how are upgrades and patch updates handled?
thanks!WL Platform installation is not based on msi.
Upgrades and patches are delivered in several ways, e.g., separate executables, zip, or smart update over net. -
Installation of SAPCCM4X-Agent on Windows Cluster
Hi!
I woulld like to install SAPCCM4X-Agent on Windows Cluster.
Does anyone know the procedure here (e.g. install the agent twice on both nodes, etc.)...
Thank you very much!
regards
ThomHello Thom,
Here is a note that will help you out.
SAP Note 536954 - OS data in a cluster environment for OS07
As per the note
The CCMS agent must be located on a shared disk, so that the cluster administrator software can start the service later.
Regards,
Siddhesh
Edited by: Siddhesh Ghag on May 27, 2008 11:02 AM
Maybe you are looking for
-
Hello, I have a Macbook Pro 15" from Mid 2010 and today I went and bought a Mini displayport to HDMI connection so I could use a TV as a monitor and clamshell. The TV is an Emerson LC220EM1. Which is a 22" monitor. I am having problems getting the TV
-
When i try to create Filter on aggregation level the system gives me error
Hi BI Guru's, I am facing a problem BI - IP . When i try to create Filter on aggregation level the system gives me follwoing error. "Authorization check of component failed" "You do not have authorisation for Add or Create". "Could not create Filter
-
Lenovo IdeaCentre A720 use as a Touch Monitor 4 a Mac Laptop - ???
Hi I am wanting to purchase an A720 but have two queries I was hoping could be answered before I do. 1) Appreciate the Lenovo is an all in one PC but can it be used as a touch monitor for another pc. I.e a working touch monitor for a windows 8 lapt
-
Standby database is not completing recovery.
All, I applied a PSU to 10.2.0.4 (8576156) patch this afternoon on both the primary and standby oracle_home(s). Upon starting up the standby database, I no longer see the “media recovery waiting” message in the alert log when an archive log is sent f
-
How do I open my disk drive? Help
How do I open my disk drive?