Installation of Preferences Pane on remote Server OSX fails

On an OSXServer mini which I connect to with RDC, I am unable to install any Preference Pane programs such as Slink or Squeeze.
I have full admin access to that machine, it's a dedicated database server, nothing exotic running on it, latest OS10.6.4, but I get the message;
"You can't open the xxx Preferences Pane because it is not available to you at this time. To see this preference pane, you may need to connect a device to your computer."
There is no mouse or screen connected to this mini, RDC access only.
The PrefPane icons become visible but remain greyed out.
Remote Management is activated in the ServerAdmin.
A very similar configuration hosted elsewhere gives no problem. Same settings, same RDC access, same OS.
At this point I'm at a loss. Clues anyone?
TIA,
Peter

The problem isn't the filesystem per se. It's bad software quality if pathnames defined wrong or multiple times with different notation. Often there is only one or two letters with the wrong upper or lower case. I guess in the current Flash installer this is the case. With the previous versions I had no problems.
Am 03.11.2013 um 00:41 schrieb Mike M <[email protected]>:
Re: Installation of Flash Player 11.9 under OSX fails with case-sensitive filesystem!?
created by Mike M in Installing Flash Player - View the full discussion
My Mini isn't case sensitive, so I can't really say but I had two iMacs when I worked at Intuit that were case sensitive and they had all kinds of software installation issues. One of the Mac developers at Mountain View told me that Case Sesnitive shouldn't be chosen as a format except when a system is isolated and used as a testing server. For a workstation or home computer, it's a terrible choice for a setup.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5809947#5809947
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5809947#5809947
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5809947#5809947. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

  • Installation of Flash Player 11.9 under OSX fails with case-sensitive filesystem!?

    The installation  of flash player 11.9 aborts with an unspecified error. I running OSX 10.9 with an case-sensitive filesystem. Can anyone confirm there are problems with the installer on case-sensitive filesystems?

    The problem isn't the filesystem per se. It's bad software quality if pathnames defined wrong or multiple times with different notation. Often there is only one or two letters with the wrong upper or lower case. I guess in the current Flash installer this is the case. With the previous versions I had no problems.
    Am 03.11.2013 um 00:41 schrieb Mike M <[email protected]>:
    Re: Installation of Flash Player 11.9 under OSX fails with case-sensitive filesystem!?
    created by Mike M in Installing Flash Player - View the full discussion
    My Mini isn't case sensitive, so I can't really say but I had two iMacs when I worked at Intuit that were case sensitive and they had all kinds of software installation issues. One of the Mac developers at Mountain View told me that Case Sesnitive shouldn't be chosen as a format except when a system is isolated and used as a testing server. For a workstation or home computer, it's a terrible choice for a setup.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5809947#5809947
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5809947#5809947
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5809947#5809947. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Installing Flash Player at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Standalone Installer Not allowing install of Remote Server Admin Tools

    I am trying to download the Windows 10 Technical Preview Remote Server Administration Tools since I need a way to quickly access Active Directory for my company. However whenever I attempt to download the file WindowsTH-KB2693643-x64.msu I
    get an this error message: 
    Windows Update Standalone Installer: The update is not applicable to your computer.
    I do have a 64 bit OS as well as Windows 10 Technical Preview 9926 currently running. So I am not sure as to the reason that I am getting this error. Any tips or clues would greatly help and be appreciated.

    Hi Magan P,
    Do you have any update about this issue?
    What’s the result when you download the latest RSAT tool?
    Regards,
    Alex Zhao
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Debugging to remote server - deployment fails

    Please help. I'm running a WLS8.1 Integration server on a remote
    machine and WLW8.1 on my dev machine. I created a small test
    application and it will work as expected; build, debug offers deploy,
    undeploy, etc. life-phases are all fine on my local machine.
    I set application server properties to point to the remote machine, its
    hostname, port, domain and server. IDE then understands whether this
    server is running or not, so it all looks good. Debugging session fails
    with message "unable to enable debugging. verify that your webapp
    deployed correctly". I can view tools || server || redeploy and
    undeploy. If I undeploy, then deploy is added to this context-menu so
    the ide seems to believe that it's deployment was successful. I never
    see anything in the JDPA transport window, nor the server console
    window, on the remote machine.
    If I create an EAR I can deploy that and I can then debug the application.
    If I use the IDE to deploy (a rebuilt/modified) version of the
    application as above, I am warned that an existing application of the
    same name exists - so I tell it to replace that. Then I am again unable
    to debug.
    We've concluded that the only way to get an app to the remote server for
    debugging is to build the EAR and deploy that. But, that can't be
    correct, can it?!?!
    Thanks in advance for any assistance. My eval is stalled at this point
    and I would really like to get beyond the mechanics of using a shared
    server for our team.
    -Richard

    .

  • Installation issues - Connection to the specified server has failed

    Hi
    i am trying to install sap server on windows 2008.my SQL server is on another box with windows 2003 and SQL 2008
    select server type drop down is blank and after entering SQL server name/user/password i am agettig this error
    "Connection to the specified server has failed"
    to make sure i have access to sql server ,i hav installed SQL 2008 native client and created one test odbc DSN to test that my serevr is talking to database server
    databse and both 2003 and 2008 machines are 64 bit
    Please help

    yes
    one thing i am noticing when i run install is i am getting this message on first screen
    so is the setup i ma running really compatible with SQL 2008?
    i am runing the setup from Patch0 because other patch downlads do not have ther server setup
    The installer detected an outdated version of MSSQL installed on this machine.
    If you are using another type of database to run SAP Business One, such as DB2 or MaxDB, press Skip.
    To upgrade your MSSQL version exit this installation. Only an experienced system administrator or DBA should upgrade the database.

  • Remote install OSX fails on MacBook Air (late 2008)

    I'm trying to reinstall OSX on my old MacBook Air so I can sell it and upgrade to the new one. I have done this procedure before, but now it doesn't complete. When I reboot the Air holding down the option key, it reboots and gives me a choice of using the internal disk or the remote disk, and I choose the remote. It does not give me any further options (like the optional installs, disk utility, etc) and appears to run, but it winds up just rebooting as my old user as if I were just rebooting the machine instead of doing a reinstall.
    I've done it several times (like 20!!) trying slightly different things each time. The only difference is that sometimes it doesn't recognize the remote disk and I have to start again. I've also tried partitioning the Air hard drive, but it won't partition, and I've tried making a disc image of the OSX CD on an external drive and booting from there, but it is not recognized as a viable startup disc (the DMG is fine tho).
    I've also tried resetting factory settings cmdoption+shiftpower, and resetting the PRAM, cmdoption+PR. That didn't help either.
    I spoke to an Apple rep on the phone who didn't know what else to do, but suggested that there may be something to do with the fact that the Air is running Snow Leopard (which I don't have the discs for right now) and the original bootup discs are OS 10.5 (Leopard).
    Anyone have any suggestions? I really don't want to sell the thing unless I have erased all my old user info--this should be pretty simple and straightforward, taking less than an hour to complete, but so far I have spent over 12 hrs on it!

    I finally got this to work, so I thought I'd share the specifics for posterity... the fix was dependent on one or both of the following two steps:
    1. Grasping at straws, I switched from the 10.6 install disc back to the 10.5 "MacBook Air" install disc, but obtained exactly the same result as previously.
    2. Finally, I reset the PRAM / NVRAM by turning the machine off and booting with the command-option-p-r keys held down.
    As soon as the MBA began the reboot cycle that follows the PRAM reset, I held down the option key again, to take another stab at the Remote Install process that failed so many times before. Only this time it worked. I'm not sure if it was step #2 only, or #1 and #2 in conjunction that did it, but I'm not going to sink another several hours into the experimental determination.
    Just to be clear about what was happening before the fix: Like Passion.LY, I would boot the MBA while holding the option key (and with the Remote Install app running on the other machine, DVD sharing enabled, etc.), and that would at least get me to the network selection screen. After successfully joining the network, the remote install disc would appear, and I would select it. Some very tentative "seek" noises would be emitted from the optical drive across the room, while the MBA displayed the Apple logo screen for about a minute (with a spinning globe icon instead of the usual twirl icon). Then, very quickly and almost imperceptibly, a large "slashed circle" symbol (of the sort that would indicate "no" or "prohibited" on signage) would flash on the screen, followed by the standard Apple logo / twirl icon -- as the system proceeded to boot from the hard drive as though nothing else had been done.
    Success was obvious when instead of the the "no" symbol I was treated to a much louder sequence of optical drive access sounds, for the duration of a rather lengthy boot process.
    All this for a few minutes in disk utility... Apple should really consider making a small recovery partition part of the standard OS install -- or at least put one in for MBA users -- whose shared optical drives that feel especially "remote" (and ephemeral) at times like this, and who can no longer fall back on Firewire target disk mode... Nostalgic stuff, that.

  • Sent Classic to the Trash-Damaged OSX System Preferences Pane

    I decided to delete Classic as I no longer use it. Using Spotlight I identified various Classic files and folders and deleted them.
    One of them must have belonged to the OSX System Preferences pane, as the Classic Preferences icon has now disappeared.
    Can I get this back? If I need to reinstall Classic later I assume I shall need it
    iBookG4   Mac OS X (10.4.7)  

    That's normal, isn't it? The Classic icon only appeared in my Sys Pref panel after I accidentally clicked on a OS9 application. (Started out with 10.4.4 on my mini).
    I am reasonably sure should you attempt to start a Classic app, the icon in your Sys Pref panel will re-appear as well.

  • Missing Xsan Preference Pane in 10.7 Server

    I'm running 10.7 Server on a Mac Mini Server, and the Xsan preference pane is missing from system preferences. Meaning, I can't configure it as the metadata controller. Am I missing something?
    Thanks!

    Ok, so I am an idiot. <crickets chirping>
    Ok so no new's flash there.  Apparently no universe either..."on own, on own....".
    Here is my problem...
    Here is the solution...
    And there are the triangle thingies again...the visual cue I was missing was the tiny little label shown below circled in blue.
    Oh well...I'm now less dum. Until next time, universe...over and out.
    Callsign: Alaskan boy.
    aka shadowwraith.

  • Installation issue - using a remote server without using remote desktop or citrix

    Hello Experts..
    We have a client who wants to install SAP Client (SAP 9 PL 11) in their local machines, but connecting to a remote server. They want to avoid connecting through Remote Desktop or Citrix.They already installed SAP clients in local pc's and when they select the server, they already configured it to a server located overseas. We succed on achieve the connection, but the performance is really poor (sometimes it takes about 2 minutes to open a simple menu in SAP).
    We ran internet speed tests in the client's office and in the server, and both results were more than satisfactory. But we couldn't come up with a reason for this enviroment works properly..
    The question is... Is this kind of enviroment supported by SAP?? Do you know about any alternative to connect from the local PC to a remote server without using remote desktop or citrix??
    Thanks in advance...
    Raúl Fragueiro

    Hi,
    I assumed you are using VPN connection right?
    In your scenario that is normal since the GUI of SAP B1 is not built for type of connection compare
    to SAP ERP GUI.
    The only SAP supported type of remote connection is either Terminal Server or Citrix.
    In our own scenario we are using Terminal Server and we are very satisfied. We have used
    this between to different cities. This is also prevents data corruption cause by intermittent
    internet connection.
    Hoping you will be convinced of using Terminal Server or Citrix.
    By the way, a quick question, why are you hesitant to use RDC or Citrix?
    For overview, if your remote requirement is just simple and basic you may use Terminal Server.
    The implementation of  this is very fast and simple also, what you need is only a license.
    If complex and advance features connection requirement connection use Citrix.
    For better understanding you may search from the site for the difference of the two.
    Thanks.
    Regards,
    Clint

  • How can I get sound on my MacBook Air after installation of Lion? "No output devices found" on the system preferences pane of my MacBook Air.

    Since installing Lion on my MacBook Air, I get no sound and ITunes playback doesn't move. The Sound Preference pane states "No output devices found." The Bluetooth connection to a WiFi speaker works, so it must be a software problem. Anyone?

    For sound, try the audio output port and connecting to the RCA  audio input ports on your Pioneer receiver.  Use something like this:
    http://eshop.macsales.com/item/OWC/PODCONNECTOR/
    Ciao.

  • Sharing Preference pane "Cannot Open" error?

    Hi all,
    Im running Tiger 10.4.6 on a MacBook Pro 2.0, connecting to the Internet through an ADSL router via an Airport Express base station, everything fully updated.
    Suddenly, when trying to open the "Sharing" preference-pane, I get this error:
    Preferences Error
    You cannot open Sharing preferences pane on this
    computer. Contact the developer of this software
    for a newer version.
    I haven't installed or updated anything in the last few days, and it worked earlier today.
    I have tried restarting, and deleted the following preferences, to no avail:
    com.apple.sharing.firewall.plist
    com.apple.networkConfig.plist
    Any ideas?
    TIA,
    Thomas
    MacBook Pro 2.0 / 2Gig RAM / 100gb, 7200 rpm   Mac OS X (10.4.6)  

    Hello again, and thank you for your replies, and sorry for the late response.
    First off; I have installed the latest 10.4.7 Combo Updater, but that did not install a new SharingPref.prefPane. I even removed the old one, before running the freshly downloaded Combo installer.
    Actually, I did the exact same thing a week ago - same result.
    So, in the meantime I had some work I needed to finish, so I didn't have time to investigate further, until this morning. Where I, much to my surprise, found the SharingPref.prefPane back in /Macintosh HD/System/Library/PreferencePanes/ and it was still the wrong version!
    So "something" must be installing the wrong - old - SharingPref.prefPane. Well, I took a peek at my install log, searched for "sharing", and lo and
    behold!
    The mystery is - somewhat - solved. The old SharingPref.prefPane comes from and old Apple Remote Desktop 2.2 installer, that contains an installer called PantherSharing.pkg. See search from Console.app below.
    What puzzles me, is the fact that I installed the wrong (old 2.2) version of ARD, to monitor a couple of servers, and of course uninstalled that version, and installed 3.0, the minute I realized my error.
    How can that old installer keep "updating" my system, even after I've removed the old ARD? It's as if something is running the receipt, witch I funny enough, can't find on my system anymore.
    The dates don't match either, or they do, but I would expect more entries from last week, where I removed the old SharingPref.prefPane and it mystically appeared again this morning.
    The receipt must have run in the last week, but I can't find anything in my logs - install.log.0.gz OR install.log.
    Maybe running a reciept dosen't get logged?
    Ohh well Anyway - beneath is a copy of my log, and the question now is; How do I get the correct Pref-pane, when the Combo Installer doesn't install it?
    Thanks for your help everybody, and shawnhm, thanks for Sharing my Pane ... Thank you, Thank you, I'm here all week
    ===============================
    Anything matching "sharing" from "install.log.0.gz:
    May 27 14:40:17 tbo : @(#)PROGRAM:Installer PROJECT:Installer-94 DEVELOPER:root BUILT:Jan 13 2006 18:32:16\n
    May 27 14:40:17 tbo : Hardware: MacBookPro1,1 @ 2000 MHz (x2), 2048 MB
    May 27 14:40:17 tbo : Running OS Build: 8I1119
    May 27 14:40:17 tbo : Remote Desktop Installation Log
    May 27 14:40:17 tbo : Opened from: /Volumes/Apple Remote Desktop 2.2/RemoteDesktop.mpkg
    May 27 14:40:18 tbo : It took 0.906322 seconds to finish launching.
    May 27 14:40:20 tbo : Distribution: Remote Desktop
    May 27 14:40:22 tbo : Installation checks completed successfully.
    May 27 14:40:36 tbo : admin auth received to install
    May 27 14:40:36 tbo : =============================================================================== =
    May 27 14:40:36 tbo : User picked Easy Install
    May 27 14:40:36 tbo : Choices selected for installation:
    May 27 14:40:36 tbo : Install: "Remote Desktop"
    May 27 14:40:36 tbo : RemoteDesktop.mpkg : com.apple.mpkg.ARD : 2.2.0.1660000.0
    May 27 14:40:36 tbo : RemoteDesktopAdmin220.pkg : com.apple.pkg.RemoteDesktopAdmin220 : 2.2.0.1660000.338
    May 27 14:40:36 tbo : RemoteDesktopClient220.mpkg : com.apple.mpkg.ARDClient : 2.2.0.1660000.0
    May 27 14:40:36 tbo : RemoteDesktopClient220.pkg : com.apple.pkg.RemoteDesktopClient220 : 2.2.0.1660000.338
    May 27 14:40:36 tbo : PantherSharing.pkg : com.apple.pkg.PantherSharing : 2.0.0.1660000.338
    May 27 14:40:36 tbo : RemoteDesktopRMDB733.pkg : com.apple.pkg.RemoteDesktopRMDB733 : 2.0.0.1660000.338
    May 27 14:40:36 tbo : =============================================================================== =
    May 27 14:40:36 tbo : It took 0.031255 seconds to summarize the package selections.
    May 27 14:40:36 tbo : Starting installation:
    May 27 14:40:36 tbo : Preparing volume "Macintosh HD" for installation
    May 27 14:40:36 tbo : Configuring volume "Macintosh HD"
    May 27 14:40:37 tbo : Preparing local booted disk
    May 27 14:40:37 tbo : Create temporary directory "/private/tmp/RemoteDesktop.mpkg.4601SJd5k"
    May 27 14:40:37 tbo : run preflight script for Apple Remote Desktop Admin Update
    May 27 14:40:36 tbo : PantherSharing.pkg : com.apple.pkg.PantherSharing : 2.0.0.1660000.338
    May 27 14:40:38 tbo : preflight[472]: /bin/mv /System/Library/PreferencePanes/SharingPref.prefPane /System/Library/PreferencePanes/SharingPref.tempSave
    May 27 14:40:38 tbo : preflight[482]: /bin/mv /System/Library/PreferencePanes/SharingPref.prefPane /System/Library/PreferencePanes/SharingPref.tempSave
    May 27 14:40:38 tbo : preflight[482]: mv: rename /System/Library/PreferencePanes/SharingPref.prefPane to /System/Library/PreferencePanes/SharingPref.tempSave/SharingPref.prefPane: No such file or directory
    May 27 14:40:38 tbo : run preflight script for Panther Sharing Preferences
    May 27 14:40:38 tbo : preflight[492]: /bin/mv /System/Library/PreferencePanes/SharingPref.prefPane /System/Library/PreferencePanes/SharingPref.tempSave
    May 27 14:40:38 tbo : preflight[492]: mv: rename /System/Library/PreferencePanes/SharingPref.prefPane to /System/Library/PreferencePanes/SharingPref.tempSave/SharingPref.prefPane: No such file or directory
    May 27 14:40:44 tbo : Processing Panther Sharing Preferences:
    May 27 14:40:47 tbo : It took 0.080088 seconds to run preflight script for Panther Sharing Preferences
    May 27 14:40:47 tbo : It took 0.681835 seconds to Install Panther Sharing Preferences: 20 elements
    May 27 14:40:47 tbo : It took 0.680004 seconds to unsuccessfully Install package Panther Sharing Preferences
    Jun 3 23:13:15 tbo : Panther Sharing Preferences Installation Log
    Jun 3 23:13:15 tbo : Opened from: /Library/Receipts/PantherSharing.pkg
    Jun 3 23:13:17 tbo : Distribution: Panther Sharing Preferences
    MacBook Pro 2.0 / 2GB RAM / 100GB HD, 7200 rpm   Mac OS X (10.4.7)  

  • User Preference Panes dimmed, unable to access...

    I am "in charge" of our network which consists of 10 PowerMac G5s, an XServe and XRAID. We are currently running 10.4.6 throughout.
    We are adding some WACOM tablets to a couple stations, but I have been unable to access the WACOM preference pane in the system preferences. The WACOM software creates a new row below the "System" row, and adds it's preference pane. When logged in as a user this pane is visible, but dimmed out. When I log in as root the preference becomes available, and I am able to tune the tablet.
    I have used the latest driver, and have installed / uninstalled a few times. I have installed as root, and as a user with identical results as above.
    The Workgroup Manager has NOT been configured to manage user preferences; there are three options that I see, "Never", "Once", and "Always"- "Never" is selected.
    I am looking for a way to make the WACOM pane available to the user. Any thoughts?
    Thanks!

    Tried Repairing Permissions on the machine after installation?
    I would have thought that installing as Root would be a bad idea (might cause permissions problems). An 'admin' user should be sufficient. Do 'plain' users have any restrictions set on them in their Accounts preferences?
    It doesn't sound like it has anything to do with the server though, (if you are not using managed preferences). If you get no joy here (server forum) you might want to try the genera Tiger forum area.
    -david

  • Can't open internet accounts preference pane in system preferences

    When i clicking internet accounts in the system preferences, Preferences error, could not open internet accounts preference pane

    I am having the same issue and GoddyJ suggestion does not work for me. Like Roy, my console also points to Calendar as being the issue. Below is the All Messages feed from it when I try to open the Internet Accounts Preference pane. This is driving me spare...
    25/11/2014 3:29:04.817 am com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    25/11/2014 3:29:04.986 am com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    25/11/2014 3:29:05.302 am com.apple.internetaccounts[448]: Additional Logging , array retured in signedInAccounts is (
    25/11/2014 3:29:05.334 am com.apple.NotesMigratorService[286]: Joined Aqua audit session
    25/11/2014 3:29:05.339 am com.apple.internetaccounts[448]: Returning accountUIDs: (
    25/11/2014 3:29:05.339 am com.apple.internetaccounts[448]: Adding listener
    25/11/2014 3:29:05.407 am com.apple.internetaccounts[448]: [com.apple.calendar.agentLink.xpc] [Creating a remote proxy object for com.apple.CalendarAgent.proxy resulted in an invalid connection. The connection will be removed. Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CalendarAgent.proxy was invalidated.) UserInfo=0x60800047bdc0 {NSDebugDescription=The connection to service named com.apple.CalendarAgent.proxy was invalidated.} (
      0   CalendarAgentLink                   0x00007fff8c2b23c5 -[CalAgentLink _remoteObjectWithErrorBlock:] + 47
      1   CalendarPersistence                 0x00007fff90d9fde2 +[CalPersistence _startCoreDataXPCServer:] + 198
      2   CalendarPersistence                 0x00007fff90da0835 __87+[CalPersistence asyncConnectToPersistenceWithClientXPCWaitingOnGroup:completionBlock:]_block_in voke344 + 130
      3   libdispatch.dylib                   0x00007fff90e2d323 _dispatch_call_block_and_release + 12
      4   libdispatch.dylib                   0x00007fff90e28c13 _dispatch_client_callout + 8
      5   libdispatch.dylib                   0x00007fff90e2f99e _dispatch_async_redirect_invoke + 650
      6   libdispatch.dylib                   0x00007fff90e28c13 _dispatch_client_callout + 8
      7   libdispatch.dylib                   0x00007fff90e2b88f _dispatch_root_queue_drain + 935
      8   libdispatch.dylib                   0x00007fff90e39fe4 _dispatch_worker_thread3 + 91
      9   libsystem_pthread.dylib             0x00007fff938d96cb _pthread_wqthread + 729
      10  libsystem_pthread.dylib             0x00007fff938d74a1 start_wqthread + 13
    25/11/2014 3:29:05.408 am com.apple.internetaccounts[448]: [com.apple.calendar.store.log] [Tried to connect to XPC persistence, but connection was invalidated, retrying...]
    25/11/2014 3:29:05.408 am com.apple.internetaccounts[448]: [com.apple.calendar.store.log] [Retry Attempt 1]
    25/11/2014 3:29:05.410 am com.apple.internetaccounts[448]: [com.apple.calendar.agentLink.xpc] [Creating a remote proxy object for com.apple.CalendarAgent.proxy resulted in an invalid connection. The connection will be removed. Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CalendarAgent.proxy was invalidated.) UserInfo=0x60800047d5c0 {NSDebugDescription=The connection to service named com.apple.CalendarAgent.proxy was invalidated.} (
      0   CalendarAgentLink                   0x00007fff8c2b23c5 -[CalAgentLink _remoteObjectWithErrorBlock:] + 47
      1   CalendarPersistence                 0x00007fff90d9fde2 +[CalPersistence _startCoreDataXPCServer:] + 198
      2   CalendarPersistence                 0x00007fff90da0275 +[CalPersistence _startCoreDataXPCServer:] + 1369
      3   CalendarPersistence                 0x00007fff90da0835 __87+[CalPersistence asyncConnectToPersistenceWithClientXPCWaitingOnGroup:completionBlock:]_block_in voke344 + 130
      4   libdispatch.dylib                   0x00007fff90e2d323 _dispatch_call_block_and_release + 12
      5   libdispatch.dylib                   0x00007fff90e28c13 _dispatch_client_callout + 8
      6   libdispatch.dylib                   0x00007fff90e2f99e _dispatch_async_redirect_invoke + 650
      7   libdispatch.dylib                   0x00007fff90e28c13 _dispatch_client_callout + 8
      8   libdispatch.dylib                   0x00007fff90e2b88f _dispatch_root_queue_drain + 935
      9   libdispatch.dylib                   0x00007fff90e39fe4 _dispatch_worker_thread3 + 91
      10  libsystem_pthread.dylib             0x00007fff938d96cb _pthread_wqthread + 729
      11  libsystem_pthread.dylib             0x00007fff938d74a1 start_wqthread + 13
    25/11/2014 3:29:05.411 am com.apple.internetaccounts[448]: [com.apple.calendar.store.log] [Tried to connect to XPC persistence, but connection was invalidated, retrying...]
    25/11/2014 3:29:05.411 am com.apple.internetaccounts[448]: [com.apple.calendar.store.log] [Retry Attempt 2]
    25/11/2014 3:29:05.463 am com.apple.internetaccounts[448]: [com.apple.calendar.agentLink.xpc] [Creating a remote proxy object for com.apple.CalendarAgent.proxy resulted in an invalid connection. The connection will be removed. Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CalendarAgent.proxy was invalidated.) UserInfo=0x60800047e780 {NSDebugDescription=The connection to service named com.apple.CalendarAgent.proxy was invalidated.} (
      0   CalendarAgentLink                   0x00007fff8c2b23c5 -[CalAgentLink _remoteObjectWithErrorBlock:] + 47
      1   CalendarPersistence                 0x00007fff90d9fde2 +[CalPersistence _startCoreDataXPCServer:] + 198
      2   CalendarPersistence                 0x00007fff90da0275 +[CalPersistence _startCoreDataXPCServer:] + 1369
      3   CalendarPersistence                 0x00007fff90da0275 +[CalPersistence _startCoreDataXPCServer:] + 1369
      4   CalendarPersistence                 0x00007fff90da0835 __87+[CalPersistence asyncConnectToPersistenceWithClientXPCWaitingOnGroup:completionBlock:]_block_in voke344 + 130
      5   libdispatch.dylib                   0x00007fff90e2d323 _dispatch_call_block_and_release + 12
      6   libdispatch.dylib                   0x00007fff90e28c13 _dispatch_client_callout + 8
      7   libdispatch.dylib                   0x00007fff90e2f99e _dispatch_async_redirect_invoke + 650
      8   libdispatch.dylib                   0x00007fff90e28c13 _dispatch_client_callout + 8
      9   libdispatch.dylib                   0x00007fff90e2b88f _dispatch_root_queue_drain + 935
      10  libdispatch.dylib                   0x00007fff90e39fe4 _dispatch_worker_thread3 + 91
      11  libsystem_pthread.dylib             0x00007fff938d96cb _pthread_wqthread + 729
      12  libsystem_pthread.dylib             0x00007fff938d74a1 start_wqthread + 13
    25/11/2014 3:29:05.463 am com.apple.internetaccounts[448]: [com.apple.calendar.store.log] [Tried to connect to XPC persistence, but connection was invalidated, retrying...]
    25/11/2014 3:29:05.464 am com.apple.internetaccounts[448]: [com.apple.calendar.store.log] [Retried Attempt 3]
    25/11/2014 3:29:05.967 am com.apple.internetaccounts[448]: [com.apple.calendar.agentLink.xpc] [Creating a remote proxy object for com.apple.CalendarAgent.proxy resulted in an invalid connection. The connection will be removed. Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CalendarAgent.proxy was invalidated.) UserInfo=0x608000460ec0 {NSDebugDescription=The connection to service named com.apple.CalendarAgent.proxy was invalidated.} (
      0   CalendarAgentLink                   0x00007fff8c2b23c5 -[CalAgentLink _remoteObjectWithErrorBlock:] + 47
      1   CalendarPersistence                 0x00007fff90d9fde2 +[CalPersistence _startCoreDataXPCServer:] + 198
      2   CalendarPersistence                 0x00007fff90da0275 +[CalPersistence _startCoreDataXPCServer:] + 1369
      3   CalendarPersistence                 0x00007fff90da0275 +[CalPersistence _startCoreDataXPCServer:] + 1369
      4   CalendarPersistence                 0x00007fff90da0275 +[CalPersistence _startCoreDataXPCServer:] + 1369
      5   CalendarPersistence                 0x00007fff90da0835 __87+[CalPersistence asyncConnectToPersistenceWithClientXPCWaitingOnGroup:completionBlock:]_block_in voke344 + 130
      6   libdispatch.dylib                   0x00007fff90e2d323 _dispatch_call_block_and_release + 12
      7   libdispatch.dylib                   0x00007fff90e28c13 _dispatch_client_callout + 8
      8   libdispatch.dylib                   0x00007fff90e2f99e _dispatch_async_redirect_invoke + 650
      9   libdispatch.dylib                   0x00007fff90e28c13 _dispatch_client_callout + 8
      10  libdispatch.dylib                   0x00007fff90e2b88f _dispatch_root_queue_drain + 935
      11  libdispatch.dylib                   0x00007fff90e39fe4 _dispatch_worker_thread3 + 91
      12  libsystem_pthread.dylib             0x00007fff938d96cb _pthread_wqthread + 729
      13  libsystem_pthread.dylib             0x00007fff938d74a1 start_wqthread + 13
    25/11/2014 3:29:05.968 am com.apple.internetaccounts[448]: [com.apple.calendar.store.log] [Tried to connect to XPC persistence, but connection was invalidated, retrying...]
    25/11/2014 3:29:05.969 am com.apple.internetaccounts[448]: [com.apple.calendar.store.log] [Retried Attempt 4]
    25/11/2014 3:29:07.471 am com.apple.internetaccounts[448]: [com.apple.calendar.agentLink.xpc] [Creating a remote proxy object for com.apple.CalendarAgent.proxy resulted in an invalid connection. The connection will be removed. Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CalendarAgent.proxy was invalidated.) UserInfo=0x60000027aa00 {NSDebugDescription=The connection to service named com.apple.CalendarAgent.proxy was invalidated.} (
      0   CalendarAgentLink                   0x00007fff8c2b23c5 -[CalAgentLink _remoteObjectWithErrorBlock:] + 47
      1   CalendarPersistence                 0x00007fff90d9fde2 +[CalPersistence _startCoreDataXPCServer:] + 198
      2   CalendarPersistence                 0x00007fff90da0275 +[CalPersistence _startCoreDataXPCServer:] + 1369
      3   CalendarPersistence                 0x00007fff90da0275 +[CalPersistence _startCoreDataXPCServer:] + 1369
      4   CalendarPersistence                 0x00007fff90da0275 +[CalPersistence _startCoreDataXPCServer:] + 1369
      5   CalendarPersistence                 0x00007fff90da0275 +[CalPersistence _startCoreDataXPCServer:] + 1369
      6   CalendarPersistence                 0x00007fff90da0835 __87+[CalPersistence asyncConnectToPersistenceWithClientXPCWaitingOnGroup:completionBlock:]_block_in voke344 + 130
      7   libdispatch.dylib                   0x00007fff90e2d323 _dispatch_call_block_and_release + 12
      8   libdispatch.dylib                   0x00007fff90e28c13 _dispatch_client_callout + 8
      9   libdispatch.dylib                   0x00007fff90e2f99e _dispatch_async_redirect_invoke + 650
      10  libdispatch.dylib                   0x00007fff90e28c13 _dispatch_client_callout + 8
      11  libdispatch.dylib                   0x00007fff90e2b88f _dispatch_root_queue_drain + 935
      12  libdispatch.dylib                   0x00007fff90e39fe4 _dispatch_worker_thread3 + 91
      13  libsystem_pthread.dylib             0x00007fff938d96cb _pthread_wqthread + 729
      14  libsystem_pthread.dylib             0x00007fff938d74a1 start_wqthread + 13
    25/11/2014 3:29:07.472 am com.apple.internetaccounts[448]: [com.apple.calendar.store.log] [Tried to connect to XPC persistence, but connection was invalidated, retrying...]
    25/11/2014 3:29:07.472 am com.apple.internetaccounts[448]: [com.apple.calendar.store.log] [Retried too many times, giving up.]
    25/11/2014 3:29:07.473 am com.apple.internetaccounts[448]: [com.apple.calendar.store.log] [Couldn't start the XPC store server. Error Domain=CalPersistenceCreationDomain Code=3 "Could not create XPC connection to the CalendarAgent, connection interrupted or invalidated more than 5 times" UserInfo=0x60000027a900 {NSLocalizedDescription=Could not create XPC connection to the CalendarAgent, connection interrupted or invalidated more than 5 times}]
    25/11/2014 3:29:07.477 am com.apple.internetaccounts[448]: [com.apple.calendar.agentLink.xpc] [Creating a remote proxy object for com.apple.CalendarAgent.store resulted in an invalid connection. The connection will be removed. Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CalendarAgent.store was invalidated.) UserInfo=0x60800027cb00 {NSDebugDescription=The connection to service named com.apple.CalendarAgent.store was invalidated.} (
      0   CalendarAgentLink                   0x00007fff8c2b23c5 -[CalAgentLink _remoteObjectWithErrorBlock:] + 47
      1   CalendarStore                       0x00007fff88b31673 +[CalCalendarStore defaultCalendarStore] + 256
      2   Calendar                            0x000000010b6fd13c Calendar + 12604
      3   com.apple.internetaccounts          0x000000010639ef63 main + 18536
      4   InternetAccounts                    0x00007fff90b71eff __58-[IADataPluginController plugin:performBlock:withTimeOut:]_block_invoke + 401
      5   libdispatch.dylib                   0x00007fff90e2d323 _dispatch_call_block_and_release + 12
      6   libdispatch.dylib                   0x00007fff90e28c13 _dispatch_client_callout + 8
      7   libdispatch.dylib                   0x00007fff90e2c365 _dispatch_queue_drain + 1100
      8   libdispatch.dylib                   0x00007fff90e2decc _dispatch_queue_invoke + 202
      9   libdispatch.dylib                   0x00007fff90e2b6b7 _dispatch_root_queue_drain + 463
      10  libdispatch.dylib                   0x00007fff90e39fe4 _dispatch_worker_thread3 + 91
      11  libsystem_pthread.dylib             0x00007fff938d96cb _pthread_wqthread + 729
      12  libsystem_pthread.dylib             0x00007fff938d74a1 start_wqthread + 13
    25/11/2014 3:29:07.478 am com.apple.internetaccounts[448]: [com.apple.calendar.agentLink.xpc] [Creating a remote proxy object for com.apple.CalendarAgent.store resulted in an invalid connection. The connection will be removed. Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CalendarAgent.store was invalidated.) UserInfo=0x60800027d300 {NSDebugDescription=The connection to service named com.apple.CalendarAgent.store was invalidated.} (
      0   CalendarAgentLink                   0x00007fff8c2b23c5 -[CalAgentLink _remoteObjectWithErrorBlock:] + 47
      1   CalendarStore                       0x00007fff88b36c4f -[CalCalendarStore(CalCalendarStore_Private) groups] + 156
      2   Calendar                            0x000000010b6fd168 Calendar + 12648
      3   com.apple.internetaccounts          0x000000010639ef63 main + 18536
      4   InternetAccounts                    0x00007fff90b71eff __58-[IADataPluginController plugin:performBlock:withTimeOut:]_block_invoke + 401
      5   libdispatch.dylib                   0x00007fff90e2d323 _dispatch_call_block_and_release + 12
      6   libdispatch.dylib                   0x00007fff90e28c13 _dispatch_client_callout + 8
      7   libdispatch.dylib                   0x00007fff90e2c365 _dispatch_queue_drain + 1100
      8   libdispatch.dylib                   0x00007fff90e2decc _dispatch_queue_invoke + 202
      9   libdispatch.dylib                   0x00007fff90e2b6b7 _dispatch_root_queue_drain + 463
      10  libdispatch.dylib                   0x00007fff90e39fe4 _dispatch_worker_thread3 + 91
      11  libsystem_pthread.dylib             0x00007fff938d96cb _pthread_wqthread + 729
      12  libsystem_pthread.dylib             0x00007fff938d74a1 start_wqthread + 13
    25/11/2014 3:29:07.479 am com.apple.internetaccounts[448]: [com.apple.calendar.agentLink.xpc] [Creating a remote proxy object for com.apple.CalendarAgent.store resulted in an invalid connection. The connection will be removed. Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CalendarAgent.store was invalidated.) UserInfo=0x60800027ae80 {NSDebugDescription=The connection to service named com.apple.CalendarAgent.store was invalidated.} (
      0   CalendarAgentLink                   0x00007fff8c2b23c5 -[CalAgentLink _remoteObjectWithErrorBlock:] + 47
      1   CalendarStore                       0x00007fff88b36c4f -[CalCalendarStore(CalCalendarStore_Private) groups] + 156
      2   Reminders                           0x000000010b715208 Reminders + 12808
      3   com.apple.internetaccounts          0x000000010639ef63 main + 18536
      4   InternetAccounts                    0x00007fff90b71eff __58-[IADataPluginController plugin:performBlock:withTimeOut:]_block_invoke + 401
      5   libdispatch.dylib                   0x00007fff90e2d323 _dispatch_call_block_and_release + 12
      6   libdispatch.dylib                   0x00007fff90e28c13 _dispatch_client_callout + 8
      7   libdispatch.dylib                   0x00007fff90e2c365 _dispatch_queue_drain + 1100
      8   libdispatch.dylib                   0x00007fff90e2decc _dispatch_queue_invoke + 202
      9   libdispatch.dylib                   0x00007fff90e2b6b7 _dispatch_root_queue_drain + 463
      10  libdispatch.dylib                   0x00007fff90e39fe4 _dispatch_worker_thread3 + 91
      11  libsystem_pthread.dylib             0x00007fff938d96cb _pthread_wqthread + 729
      12  libsystem_pthread.dylib             0x00007fff938d74a1 start_wqthread + 13
    25/11/2014 3:29:25.272 am System Preferences[274]: view service marshal failed to init due to Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection from pid 0 was invalidated from this process.) UserInfo=0x600000868b40 {NSDebugDescription=The connection from pid 0 was invalidated from this process.}
    timestamp: 03:29:25.272 Tuesday 25 November 2014
    process/thread/queue: System Preferences (274) / 0x10a7f6000 / com.apple.NSXPCConnection.user.endpoint
    code: line 2872 of /SourceCache/ViewBridge/ViewBridge-99/NSRemoteView.m in __62-[NSRemoteViewBase advanceToConfigPhase:awaitingWindowRights:]_block_invoke
    #communications_failure
    25/11/2014 3:29:25.273 am System Preferences[274]: ### com.apple.preferences.internetaccounts instantiatePrefPaneObject exception:service com.apple.preferences.internetaccounts.remoteservice failed to init an instance of InternetAccountsRemoteViewService on behalf of <NSRemoteView: 0x7f80e0c7fa40> due to proxy-communications-error: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection from pid 0 was invalidated from this process.) UserInfo=0x600000868b40 {NSDebugDescription=The connection from pid 0 was invalidated from this process.}
    25/11/2014 3:29:35.308 am CoreServicesUIAgent[284]: unexpected message <OS_xpc_error: <error: 0x7fff75f89c60> { count = 1, contents =
      "XPCErrorDescription" => <string: 0x7fff75f89f70> { length = 18, contents = "Connection invalid" }
    }>

  • Yosemite - could not load internet accounts preference pane - same for icloud - mail not running

    After Up-Grade to Yosemite 10.10:
    Mail not working
    Preferences Error Could not load Internet Accounts preference pane
    Preferences Error Could not load iCloud Accounts preference pane
    Had several issues when upgrading from Mountain Lion to Yosemite 10.10. Finally it seemed to work. When starting Mail, I tried to restore data from Time Machine (did a back-up under Mountain Lion immediately before up-grading to Yosemite). This ran for over 2 h when I suddenly noticed that "Mail quit unexpectedly. Since then I cannot work with Mail at all.
    I read on the forum that many people have issues with Mail in Yossemite but apparently it's different from what I am experiencing, and it seems that none of the proposed solutions work for me.
    I can start Mail, but I will only see the bar on top of the screen. Mail "Preferences" remains grey (= cannot click).
    When choosing Mail "Accounts", System Preferences opens and then I get the "Preferences Error Could not load Internet Accounts preference pane."
    I noticed then that I get a similar error when clicking "iCloud" in System Preferences: "Preferences Error Could not load iCloud Accounts preference pane."
    I can open "Internet Accounts" and "iCloud" in System Preferences when I log in as a guest without any errors, but as soon as I log in with my user name, I get the same errors.
    As suggested elsewhere in this forum, I removed the com.apple.mail-shared.plist in library and tried the same with com.apple.internetaccounts.plist.
    I've spent hours on this and find this increasingly frustrating. I would try another new installation of Yosemite, if only I could be confident it would work this time...
    Any advice how to solve this will be appreciated!

    Hey Sage,
    Glad you got it fixed!
    I had exactly the same problems, but found this solution on another thread courtesy of Paul Pharoah which saved the trouble of another clean install and seems to have fixed everything  . It appears the problem lies somewhere in the mail account settings.
    "I 've had the same problem today and tried lots of the suggested solutions around, all without success until....
    1.  I moved all the files in ~/Library/Mail/V2 to the desktop
    2. Deleted the folder
    3. Deleted my two email accounts (Gmail and exchange server) using System Preferences>Internet Accounts
    4. Re-started Mail.  It now re-started as if for the first time and asked me to re-input my mail accounts which I did.
    5. Mail up and running again."
    from thread: Re: Yosemite mail crash
    Cheers!

  • Installation bug - login pane stuck with spinning wheel

    The dual 2GHz G5 PowerMac is stuck with the spinning wheel of death on the login pane after the restart post installation from dvd.
    No login possible, never was since the install process.
    The computer is accessible and seems to run fine when connected to from the network.
    Any idea anyone?

    'safe boot' just doesn't change a thing
    the mouse cursor stay normal until it is moved over one of the user-icons on the login pane, and then the spinning-wheel takes over
    I can connect with different users from the network using AppleTalk
    the computer seems to otherwise be running in the background...
    removed the preferences from the login pane using remote computer
    restarted, same problem

Maybe you are looking for

  • Need sql query to remove duplicates using UNION ALL clause

    Hi, I have a sql query which has UNION clause.But the UNION clause is causing some performance issues. To overcome that I have used UNION ALL to improve performance but its returning duplicates. Kindly anyone send a sample SQL query where my primary

  • BAM Server issue

    Hi, We have One Data Object,where 6 EMSs are poiting and the dataobject is being used by 17 reports(all reports have 2 views).We are facing Thread stuck issue very frequently.We tried to restart the server.After restarting the server,its working for

  • Dreamweaver Linking to Anchor Point

    I am using Dreamweaver CS3 and am trying to link from an image to an anchor point on the same web page and play a flash video. I have followed the recommended way to create the anchor point and use the "#anchor point name" after the link to play my v

  • How to export strings with "\"

    When I export a string with backslashes in it (eg. path name to a file) then when this file is imported at run time then backslashes '\' cause the import to fail. So for now I have to replace all "xxx\yyy" strings in exported file with "xxx\\yyy" and

  • Spares supplies

    Hi, I have a scenario where a semifinished part is produced inhouse & used for an assembly and also sold as spares directly. Please suggest how to maintain it in SAP Regards, Ramesh