Installation Of PRTs on Functional Location

Hi Guys,
Can anybody tell me if I install the PRTu2019s equipment on functional location what will be the impact on business.
Because my client want to install all his PRTu2019s on functional location so that he can do the analysis in the different software which is connected with SAP.
Because that software only can track those equipment which is installed.Please provide me your valuable input.
AR

hi
I dont think there is any impact for installing the PRT towards the funtional location .normally PRT's installation will have little scope .if the client wants the same you can go ahead
regards
thyagarajan

Similar Messages

Significance of Installation and dismantling of Functional Location /Equipm

Hi,
Whta is the significance of Installing and Dismantling of Functional Location and Equipment.
Thanks in Advance.

hi
it is basically for proper structuring of your organization ,if your plant is using the combination of FL and Equipment ,then there may be several FL and equipment in the industry.
for arranging the equipment in the respective FL this installing and dismantling is provided.
Also refer [here|http://help.sap.com/saphelp_47x200/helpdata/en/01/d546244ab311d189740000e8322d00/content.htm]
regards
thyagarajan

Deletion flag at functional location - equipment installation sallowed

Hi
Small question, when we set deletion flag at functional location we can still instal equipment in transaction IE02. Is it possible to configure LF in such way that after setting delation flag or inactivation FL equipment installation shouldn't be allowed??
We wanted to do it by user status but we can't.
Thanks for help. Regards. Joanna

Hi Joanna,
Try using user exit IEQM0001 and write a custom code, not to allow equipment being installed in deleted / inactive function location.
Regards,
Prabhu

MAM25 Equipment (de) installation to functional location

Hi Guru's,
We are trying to uninstall an equipment from a functional location and then reinstall the same equipment to another functional location, however this does not always work for us.(mam25_030)
It seems to work, when the uninstall happens before the installation. It fails when installation happens before the uninstall. This is however dependend on the order on which the syncBO's are being handled, or so it seems.
- Floc with synckey 1 - uninstall equipment
- Floc with synckey 2 - install equipment
this works
But if the order is this:
- Floc with synckey 2 - uninstall equipment
- Floc with synckey 1 - install equipment
Has anyone come across this feature, and/or has a solution for this. Is there a way to influence the order of the syncBO's?
Thanks,
Karst
ps. Running on MAM25 SP15

This can be achieved but obviously the equipment hierarchy would be disturbed because the equipment can either be installed on a functional location or a superior equipment not both the two. What you can do is the functional location for the superior equipment is to be extended so as to cover the subordinate equipments and obviously there would not be any direct link between the equipment and the superior equipment.
Equipment: Recorder installed on FLoc: Plant-Recorder
Equipment: Sensor installed on Floc:Plant-Recorder-Sensor
that is how you can achieve it but the relationship between the equipment and superior equipment is to be compromised.
Regards..

Euipment installation problem at functional location.....

hello all,
i'm facing problem with equipment installation at functional location...
my functional location heirarchy is level 1,2,3
i have tick the istallation allowed check box in level-3 functional location,
as per senario defind in the help document.,   it will not allow to install euipment in levels above i.e, superiour levels level 1,2
Ex:
functional location might have the following structure:
Level 1 Conveyor installation not allowed
Level 2 Stage A installation not allowed
             Stage B installation not allowed
Level 3 Motor 1 installation allowed
             Motor 2 installation allowed
          Conveyor belt 1 installation allowed
and so on.
but in my server it is allowing to install euipment in the superiour F.. locations also ...
i.e, it is allowing to install equipment at laval 1,2
i need to know any config.. required to it..... to get the above functionality or the above senario is wrong...?
thank in advance,
regards.
gunnu

hi thyagarajan,
thank u very much for ur kind replay.
i have created functional locations like below
level 1 : CMR
level 2: CMR-A
             CMR-B
level 3: CMR-A01
            CMR-A02
            CMR-B01
            CMR-B02
and i marked F location CMR-A01 as Equipment install allowed
now the problem is when i am trying to install equipment at CMR-A01 Functional loaction it allowing asusal..
but the CMR functional location (level 1) also allowing to install the equipment
so what is the senario..
it is importent to me....
thanks for your time......
regards,
gunnu
Edited by: gunnus on Apr 27, 2011 7:36 AM

Genral question on equipment and functional location....

hi,
what I have to learn on functional location and equipment other than the below concepts
creating euipment and installation,
and customizing like screen sequences of Fun. locations and equipment....
and field selection for functional locations and equipment...
stucture indicator for F locations...
category of functional locations and equipment...
becoz i am going to allot for a project more over this is my first proect.......
Plz help me.........,
thanks in before
gunnu

Hi,
Under Equipments:
1. Equipment Master Data
2. Equipment BoM
3. Measuring Point
4. Serial Number Assignment
5. Installation / Dismantling with Superior Equipment / Functional Location
6. PRT as Equipment (Production Resource Tools)
7. Fleet Equipments
You can find all the helps in Help.sap.com under Plant Maintenance module. Just have a search in google.
[Equipments & Technical Objects|http://help.sap.com/saphelp_erp60_sp/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm]
Regards,
Maheswaran.
Edited by: Maheswaran.K on Apr 28, 2011 1:10 PM

Equipment Not Allowed at Functional Location ( Inst. at FunLoc is selected)

Hi All,
I have configure Structure Indicator like XXXX-XXXXXXXXXXXXXX. Now I have maintain functional location label like
e.g ABCD-EFG XYZ ( there is a space between G and X) .
I have already allowed installation of all equipment category to functional locations at configuration. But still system gives me an error like Installing equipment is not allowed at functional location ABCD-EFG XYZ (MSG NO IA0002).
Now if I select ABCD system is allowing to install equipment at ABCD.
If space is a special character and i have not maintained S , then why system has created that label, it must throw an error while creating that label.
Please suggest.
Regards,
Anish Ahya

Equipments can be installed at functional location if the following changes have been made
1. Configuration for equipment category installation (Already done in your case)
2. In the functional location master data in structure tab "equipment installation allowed" should be activated.
Please allow the equipment installation from functional location master data .
Regards,
Tehisn

Requirement of functional location

Hi friends
Please clarify about the below issue
1. Client is supplying the equipment to customer as a rental , sale.Once the delevrey is over they usually installing the equipment to thier functional location. For this use actually we defined the functional location as customer location(city) name. Now the issue is if the customer is moving to different location is required to create new functional location? If so what we need to do for old functional location?
2. The client usually receiving the serialised material (machine) from supplier and then selling /renting it to customer. However they will not provide the services If they sold the machine to customer. If any repair the client will recive the equipment from customer and sent to supplier (if warrnty) or sent to sub contractor (if non warranty). Both the time they follow the procurement (PO) process. For non warranty repair they raise the billing agianst the customer by sales process. Now tell me is required to create the equipment master ?
Thank you
Thenna

Hello thenna arasu ,
The process is clearly explined in the previous posts . In addition to that
1. For each sales ( Delivery ) create equipment and do the installation at functional location here the Fuctional location is same as your customer premises. so incase you are making Notification you will have all the details and also partner details . If the location is changing and you will know only at time of complaint generaintg you can think of changing the location data through cuszomization before registering the complaint .
2. If youn want to track warranty and need more controll over your services you must create eqipment master .
With Regards
Aswin Nair

How to create functional location for IE02

hi all,
can anyone please tell me that how to create functional location for IE02?
Regards saurabh.

To attach a functional location to an equipment, please make sure the following settings,
1- You have defined the installation allowed at functional location for the following equipment category.
2- Make sure status of your equipment is AVLB not ESTO.
then Goto IE02 in the structure tab ---> click change installation location and install the functional location.
Regards,
EJ

Functional Location field is Grayed out in change mode

Dear Experts ,
I have created an equipment automatically through serial number managed material .
But the equipment created has no functional location assigned to it .
Also when in change mode of the equipment the functional location field is grayed out & there is no provision to dismantle & reassign the same .
Pls tell me how can i assign a functional loaction to this automatically created equipment ??
Regards
Anis

Hello Thyagrajan ,
In IMG ...
Equipments --> Equipment Uasge Period --> Define Installation at functional Location
I have put a tick for the checkbox " Inst . at Func. Loc" against the said equipment category
Is ther anywhere else in IMG that i need 2 assign/check .
while trying 2 assign a functional location for this equipment the system give the error :
No InstallLocation entered: Data transfer not possible
Message no. IA036
Regards
Anis
Edited by: anis bazmi on Oct 26, 2009 9:48 AM

Idoc for functional location

Hi all,
We have to send the functional location details using idocs.
Please send me the steps involved from scratch.
Also send some good material for beginners.
Thanks in advance
Regards,
Kashyap Ivaturi

Hi Kashyap,
Plz go through these links, I found very helpful I got these from one of the post in sdn.sap
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
http://idocs.de
For more info on idocs revert.
Thanks
Mohinder Singh Chauhan

Activation of Function Location field in Fleet Objects

Dear All
In Fleet Management, the Function Location field is inactive by standard. How can we make the Function Location field active for usage?
Regards
BK

hi
For your equipment category mark the installation at functional location in T code OIEP
regards
thyagarajan

Cannot input a functional location

Hi Gurus,
I created a new equipment category. but it does not allow me to input a functional location on structure tab but when im using the standard M it does allow me to install it into a functional location. i check the field selection and they are all "input" what seems to be the problem?
Thanks!!

Hi
In Spro You have to check For your equipment category for" Installation at Functional Location"
Equipment Usage Period---Define Installation at Functional Location

Plant maintainence -Functional Location

Dear PM Experts !
One generic question.
When we maintain the Equipment Masters from IE01.
We Define the Work center, Plant, Location.
Now in the Functional Masters in the Structure:
the equipment will be automatically populated.
Please suggest that whether we have to manually assign the Equipment to the functional Location
regards,
SAP

Hi
You have to install the equipment into Functional Location manually
Like
After creating a equipment - go to structure tab. Where you wil find install struture - Install the Functional Location there.
In the equipment create / Change Window
Go to Structure in the tool bar - Select Change or install Funcational Location
In Spro
Plant Maintenance and Customer Service - Master Data in Plant Maintenance and Customer Service - Technical Objects - Equipment - Equipment Usage Period - Define Installation at Functional Location
Define which equipment category should be accepted to install functional location
- Pithan
Edited by: Pithan Pithan on Sep 25, 2008 11:37 AM

Help - Class name and descriptions for a function location.

Hi Guys
i have to write a report that displays the class and class descriptions for a function location. the user passes in either the function location(TPLNR) or the class name and the report should display the the class characteristics and resp. values. Is there a FM that i coud use?
please help.
many thanks.
seelan.

sadiepu1 wrote:
When I set up Words with Friends on my Fire it asked for my username and password which from a previous reply to my inquiry above stated that the S 3 doesn't store due to privacy issues. I have tried all my usual combinations of usernames and passwords and my Fire won't let me access the game as it keeps telling me that one or the other is not correct. I have deleted the app from my Fire and re-downloaded it but have the same error comes up. I have accessed the Words with Friends support both on my phone and their website but there is no live chat. I might have to take both to a Verizon store. Also, my Fire won't let me access the game without a correct username and password. To say that I am frustrated would be an understatement as well I have tried everything I can think of with no luck! Thanks for any help you can give!
Did you use facebook to log in?
Verizon will not be able to help you retrieve any of the information you need. You will have to contact Zynga.

Installation Of PRTs on Functional Location

Similar Messages

Maybe you are looking for