Installation of SAP Note 612011

Hi,
Iu2019m going to install SAP note 612011 in order to make sure that the system no longer automatically sets the final indicator 'Clearing Indicator for GR/IR Posting for External Services' while processing an incoming invoice.
As itu2019s possible to read in the noteu2019s text, u201Cthis modification is not a function in the standard SAP system. SAP takes no responsibility and provides no maintenance for problems that may occur as a result of this modificationu201D.
So Iu2019d like to know if someone, after having installed this note, encountered any problem.
Thanks in advance,
Elisa

Hello,
As you know data and log entries of a MaxDB database instance are stored on so called volumes which are either files or, where this is possible, raw devices.
The benefits of a RAW device is a faster write performance. Also, a RAW device is much more secure because of the direct write to disks instead of caching the writes.  The caching of writes could  cause inconsistencies if a crash occurs.    
Please go at :
http://dev.mysql.com/doc/maxdb/ -> MaxDB Library
-> Concepts of the Database System -> Creating and Configuring a Database Instance
-> Planning the Database Instance < & Technical Restrictions >
At the 'Planning the Database Instance' section in the paragraph 'Database Size and Configuration of Volumes' you will find more information.
And you could see in more details, why we recommend to use raw devices for
data and log volumes in MAXDB on UNIX systems.
Please also review the information at link - MaxDB FAQ (frequently asked questions) on the MySQL site (target audience: Open Source) :
http://dev.mysql.com/doc/maxdb/maxdb_faq.html
< '5.2. How do I configure the database files?' >
SAP customers can find more information in SAP Note 820824.
And if you are SAP customer please review the SAP notes for additional
information:
628131 SAP DB / MaxDB operating system parameters on Unix
767598 Available documentation
748225 Measurement IO times on liveCache/SAP DB/MaxDB DATA/LOG
            Volumes
Thank you and best regards, Natalia Khlopina

Similar Messages

  • Installation of SAP Netweaver trial on not englisch windows OS

    Hello
    I'm trying to install SAP Netweaver Portal trial on a not english version of Windows XP (German version). I get following warn message from the installation checker:
    Checking the names of selected well-known groups. The following names were expected: "everyone, users, guests, power users". The following names were found: "jeder, benutzer, gäste, hauptbenutzer". If they do not match, it is most probably because you are not using an English international version of Windows but a localized one instead. Only English international versions of Windows are supported. See also SAP Note 362379. (Updated 2005-06-24)
    Is that not possible to install the trial on a not english windows system ?
    Thanks

    I think before you install, you have to change your winows language set to English at control panel.
    In my case, I've installed trial version ABAP and JAVA on Japanese Windows, and it works perfect.

  • Differences between SAP Installation Guide and SAP Notes 1634482 & 1881509

    Hello all,
    we still have problems with activities in TDMS. During searching for solutions I found two SAP Notes 1634482 & 1881509 which contain entirely other information as installation guide from SAP.
    SAP guide indicates that the roles  SAP_TDMS_MASTER_CR and SAP_TDMS_RFC_USER_700_CR are enough to execute the activities.
    But the SAP Notes 1634482 & 1881509 contain another information. For example the notes indicate additionally to another roles, which you will find below:
    SAP_TDMS_CONTROL_CENTER_DISPL
    SAP_TDMS_SCRAMBLING_USER
    SAP_TDMS_SCRAMBLING_EXPERT
    SAP_TDMS_SCRAMBLING_BUS_EXPERT
    SAP_TDMS_USER
    Do I really need the additional roles? Is that all? Do I need to request  another roles additionally?
    Thanks in advance and br,
    Ilkin

    Hello Anita,
    the situation is strange. The problem is that the activity "Verification of Execution System" cannot be performed. The status is "Release/Scheduled". In other words "green flag" although I have all necessary roles.
    TDMS User - user type "dialog":
    In control/central and in execution system "SAP_TDMS_MASTER_CR" which contains the role "SAP_TDMS_SCRAMBLING_ADMIN". 
    RFC User - user type "dialog":
    In control/central and in execution system "SAP_TDMS_RFC_USER_CR" and "SAP_TDMS_RFC_USER_700".
    And a lot of another roles:
    SAP_DMIS_TDMS_APPL1
    SAP_DMIS_TDMS_APPL2
    SAP_DMIS_TDMS_APPL3
    SAP_DMIS_TDMS_BASIS
    SAP_DMIS_TDMS_BASIS_700
    SAP_DMIS_TDMS_RECEIVER
    SAP_DMIS_TDMS_SENDER
    SAP_TDMS_ACTGROUP_ADMIN
    SAP_TDMS_ACTGROUP_DISPLAY_USER
    SAP_TDMS_ACTGROUP_EXEC
    SAP_TDMS_CONTROL_CENTER
    SAP_TDMS_HCM_MASTER
    SAP_TDMS_HCM_USER
    SAP_TDMS_MASTER
    SAP_TDMS_MASTER_CR
    SAP_TDMS_SCRAMBLING_ADMIN
    SAP_SLOP_MASTER
    I am aware that the activity "Verification of Execution System" executed with the background job "CNV_MBT_CNV_TDMS_SCR_CHECK_PROD". But I could not find the job in SM37.
    For your attention. I have already installed all necessary SAP notes.
    What can be the reason?
    BR and thanks in advance,
    Ilkin

  • Download and Installation of attachments for SAP notes

    Hi friends I had implemented note 1284243(CPF Submission Number(CSN) changes effective from 01.01.2009) successfully.as per note solution i had updated support package. eventhough as per note i have to install of attachements for SAP notes.i found that 'Attachemnt'  with .sar extenstion for 600 version.
    How can i implement that 'attachment'?very urgent.thanks

    hello nani,
    you have to extract first the SAR files using the program SAPCAR.EXE. you can download it from the SAP support portal to your DEV server.
    then in windows command prompt, run (just make sure you are pointed to the corrected directory where you have put the SAPCAR.EXE):
    sapcar -xvf <name of your SAR file>
    usually, it would extract two corresponding files: the R and the K files.
    put the R file in your data (\usr\sap\trans) folder and the K file in your cofiles folder (\usr\sap\trans).
    after which, go to STMS -> Import Overview (F5) -> DEV
    then choose Extras -> Other Requests -> Add
    type the name of the transport request in the Transp. Request field (this name is quite the same as the file name of your R and K files). then press enter.
    the system would ask you if you want to add the transport request into the import queue.
    choose Yes.
    then, you can now start importing the transport request by the usual method (clicking the TR number and choosing the Import Request <truck> button).
    hope this helps.
    regards,
    Albert

  • XI Installation: Adapters do not work.

    Hello, All.
    I can not get any adapters after Installation of SAP XI.
    JPR adapter is only available in "RWB\Component monitoring\Adapter monitoring" (and it is at red state).
    After clicking at JPR I can see extended information:
    SLD access is in red state:
    Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for <SID>.SystemHome.<host> found
    No access to get JPR configuration
    Under "011000358700001697502004E.pdf" (Configuration Guide - SAP XI 3.0), page 47 (p. 4.1.\Testing the Cache Refresh (INTEGRATION_DIRECTORY_HMI)\7.b. Check that all cache notifications have a green status
    I have got error:
    "Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>"

    Hello, Lalit.
    Note 764176 did not help me too.
    Before implementing I have configuration in RWB\Component Monitoring:
    domain.nn.<host>
      Integration Server
        Integration Engine <SID> (at yellow state)
        Business Process Engine <SID> (at grey state)
        Mapping Runtime <host> (at green state)
    After implementing note 764176 I have got:
    domain.nn.<host>
      Integration Server (without subitems)
      Decentralized Adapter Engine
        Adapter Engine <host> (at green state)

  • Is it possible to force the implementation of a SAP note?

    Hi guys,
    I am installing SAP CPM, software components CPD 1.0 and PICM 1.0.  During the SAINT installation, I hit an error for both components in the ABAP Generation Phase.  I have found two notes with automatic corrections (1843317 and 2040519) to fix the errors.
    However, when attempting to implement both notes through SNOTE, it shows them as "Cannot be implemented".  I am assuming this is because the software components are not fully installed yet.
    I know that I can get the correction instructions from each note and manually put them in, but one of the notes has 15+ corrections.  Not exactly how I want to spend my day.
    Is there a way to force SNOTE to implement a note that is listed as "cannot be implemented"?  If not, does anyone have a better way to get the corrections applied besides doing each one manually?
    Thanks!
    -Jayson

    Hi,
    Here i would recommend to go for correction instruction instead of searching force implementation of SAP Notes as notes are used to fix bugs under some specific SAP standard codes and affects specific programs even and only recommended if support package still to be provided by SAP.
    Also need to check for the supported releases under SAP notes for performing corrections (strictly based or relevant for mentioned releases.)
    Hope you will understand and will try to avoid any issues by opting any force methods to implement the SAP Notes.
    Regards,
    Gaurav

  • Repost-- Facing Problems while installation of SAP NW PT 7.0 on Oracle 10.2

    Hello Friend,
    Sorry Friends, for my last long.....long...Post.....
    Here , i m reposting the same matter...Please help.
    We are trying to Install SAP NW PI 7.0 on Windows 2003 Server Enterprise Edition x64, with Oracle 10.2 - 64bit Edition.
    On this host, we already have installed SAP NW CE 7.1 with the same Oracle 10.2
    SAP NW CE 7.1 is working fine on this Host.
    First, we tried to install SAP NW PI 7.0 with jdk 1.4.2.16(32 bit), which was giving the error, while installation using SAPInst. So We installed jdk 1.5.0.15 (64 bit), at own risk. But, the Installation was interrupted due to some unknown error something like "SDM failed to deploy some components...etc....etc.". So, we installed jdk 1.6.0.6( which is perfect for Windows x64). With this , jdk 1.6.0.6 the last problem did not come and we reached at 9th step (of total 98th step of SAP NW PI 7.0 Installation), and was at "Prepare to install minimal Configuration", and controling START and STOP of System. Bu We found that, the System was not able to even start, at that 95th Phase.
    After that, we did lot of R&Ds to come out from the trouble.
    I am attaching the requied TRACE files, they are as followed.
    dev_disp.
    %%%%%%%%%%%%%START of dev_disp%%%%%%%%%
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno 02
    sid PI1
    systemid 562 (PC with Windows NT)
    relno 7000
    patchlevel 0
    patchno 144
    intno 20050900
    make: multithreaded, Unicode, 64 bit, optimized
    pid 3132
    Thu May 08 16:50:32 2008
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
              o
                    + SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (02 3132) http://dpxxdisp.c 1243
    shared lib "dw_xml.dll" version 144 successfully loaded
    shared lib "dw_xtc.dll" version 144 successfully loaded
    shared lib "dw_stl.dll" version 144 successfully loaded
    shared lib "dw_gui.dll" version 144 successfully loaded
    shared lib "dw_mdm.dll" version 144 successfully loaded
    rdisp/softcancel_sequence : -> 0,5,-1
    use internal message server connection to port 3902
    Thu May 08 16:50:36 2008
              o
                    + WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings http://dpxxtool2.c 5371
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >vcerp99_PI1_02 <
    DpShMCreate: sizeof(wp_adm) 25168 (1480)
    DpShMCreate: sizeof(tm_adm) 5652128 (28120)
    DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
    DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm) 552080 (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm) 0 (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm) 0 (72)
    DpShMCreate: sizeof(vmc_adm) 0 (1864)
    DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm) 48
    DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
    DpShMCreate: allocated sys_adm at 000000000EE70050
    DpShMCreate: allocated wp_adm at 000000000EE72150
    DpShMCreate: allocated tm_adm_list at 000000000EE783A0
    DpShMCreate: allocated tm_adm at 000000000EE78400
    DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
    DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
    DpShMCreate: allocated comm_adm at 000000000F3E3FA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
    DpShMCreate: allocated gw_adm at 000000000F46ACB0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F46ACE0
    DpShMCreate: allocated wall_adm at 000000000F46ACF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    <ES> Info: em/initial_size_MB( 3966MB) not multiple of em/blocksize_KB( 4096KB)
    <ES> Info: em/initial_size_MB rounded up to 3968MB
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 991 blocks reserved for free list.
    ES initialized.
    J2EE server info
    start = TRUE
    state = STARTED
    pid = 704
    argv[0] = D:\usr\sap\PI1\DVEBMGS02\exe\jcontrol.EXE
    argv[1] = D:\usr\sap\PI1\DVEBMGS02\exe\jcontrol.EXE
    argv[2] = pf=D:\usr\sap\PI1\SYS\profile\PI1_DVEBMGS02_vcerp99
    argv[3] = -DSAPSTART=1
    argv[4] = -DCONNECT_PORT=65000
    argv[5] = -DSAPSYSTEM=02
    argv[6] = -DSAPSYSTEMNAME=PI1
    argv[7] = -DSAPMYNAME=vcerp99_PI1_02
    argv[8] = -DSAPPROFILE=D:\usr\sap\PI1\SYS\profile\PI1_DVEBMGS02_vcerp99
    argv[9] = -DFRFC_FALLBACK=ON
    argv10 = -DFRFC_FALLBACK_HOST=localhost
    start_lazy = 0
    start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) http://dpxxdisp.c 1633
    ***LOG Q0K=> DpMsAttach, mscon ( vcerp99) http://dpxxdisp.c 11822
    DpStartStopMsg: send start message (myname is >vcerp99_PI1_02 <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    Thu May 08 16:50:37 2008
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet http://dpxxmbuf.c 1050
    DpMsgAdmin: Set patchno for this platform to 144
    Release check o.K.
    DpJ2eeLogin: j2ee state = CONNECTED
    Thu May 08 16:50:39 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) http://nixxi.cpp 4424
              o
                    + ERROR => NiIRead: SiRecv failed for hdl 4 / sock 184
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3822) http://nixxi.cpp 4424
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=704)
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Thu May 08 16:51:16 2008
              o
                    + ERROR => DpHdlDeadWp: W0 (pid 4316) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W1 (pid 1536) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W2 (pid 3388) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W3 (pid 3980) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W4 (pid 2980) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W5 (pid 4164) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W6 (pid 4656) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W7 (pid 4516) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W8 (pid 2576) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W9 (pid 960) died http://dpxxdisp.c 14532
    my types changed after wp death/restart 0xbf --> 0xbe
              o
                    + ERROR => DpHdlDeadWp: W10 (pid 3764) died http://dpxxdisp.c 14532
    my types changed after wp death/restart 0xbe --> 0xbc
              o
                    + ERROR => DpHdlDeadWp: W11 (pid 636) died http://dpxxdisp.c 14532
    my types changed after wp death/restart 0xbc --> 0xb8
              o
                    + ERROR => DpHdlDeadWp: W12 (pid 3896) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W13 (pid 4696) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W14 (pid 4072) died http://dpxxdisp.c 14532
    my types changed after wp death/restart 0xb8 --> 0xb0
              o
                    + ERROR => DpHdlDeadWp: W15 (pid 4808) died http://dpxxdisp.c 14532
    my types changed after wp death/restart 0xb0 --> 0xa0
              o
                    + ERROR => DpHdlDeadWp: W16 (pid 2832) died http://dpxxdisp.c 14532
    my types changed after wp death/restart 0xa0 --> 0x80
              o
                    + DP_FATAL_ERROR => DpWPCheck: no more work processes
                    + DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:26 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long) Thu May 08 11:21:26 2008
    ========================
    No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
    0 DIA 4316 Ended no 1 0 0
    1 DIA 1536 Ended no 1 0 0
    2 DIA 3388 Ended no 1 0 0
    3 DIA 3980 Ended no 1 0 0
    4 DIA 2980 Ended no 1 0 0
    5 DIA 4164 Ended no 1 0 0
    6 DIA 4656 Ended no 1 0 0
    7 DIA 4516 Ended no 1 0 0
    8 DIA 2576 Ended no 1 0 0
    9 DIA 960 Ended no 1 0 0
    10 UPD 3764 Ended no 1 0 0
    11 ENQ 636 Ended no 1 0 0
    12 BTC 3896 Ended no 1 0 0
    13 BTC 4696 Ended no 1 0 0
    14 BTC 4072 Ended no 1 0 0
    15 SPO 4808 Ended no 1 0 0
    16 UP2 2832 Ended no 1 0 0
    Dispatcher Queue Statistics Thu May 08 11:21:26 2008
    ===========================
    --------++++--
    +
    Typ      now      high      max      writes      reads
    --------++++--
    +
    NOWP      0      2      2000      6      6
    --------++++--
    +
    DIA      5      5      2000      5      0
    --------++++--
    +
    UPD      0      0      2000      0      0
    --------++++--
    +
    ENQ      0      0      2000      0      0
    --------++++--
    +
    BTC      0      0      2000      0      0
    --------++++--
    +
    SPO      0      0      2000      0      0
    --------++++--
    +
    UP2      0      0      2000      0      0
    --------++++--
    +
    max_rq_id 12
    wake_evt_udp_now 0
    wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
    since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
    Dump of tm_adm structure: Thu May 08 11:21:26 2008
    =========================
    Term uid man user term lastop mod wp ta a/i (modes)
    Workprocess Comm. Area Blocks Thu May 08 11:21:26 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id      owner      pid      eyecatcher
    --------++--
    +
    0      DISPATCHER      -1      WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:31 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >vcerp99_PI1_02 < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (5080) (SOFT_KILL)
    Stop icman
    killing process (1036) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    DpProcDied Process lives (PID:5080 HANDLE:304)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:32 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process died (PID:5080 HANDLE:304)
    wait for end of icman
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:33 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:34 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:35 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:36 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:37 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:38 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:39 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:40 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:41 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:42 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:43 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process died (PID:1036 HANDLE:312)
    DpProcDied Process died (PID:704 HANDLE:288)
    DpStartStopMsg: send stop message (myname is >vcerp99_PI1_02 <)
    NiIMyHostName: hostname = 'vcerp99'
    AdGetSelfIdentRecord: > <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 3 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 3 (r)
    NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
    Received 4 bytes from MSG_SERVER
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    Thu May 08 16:51:44 2008
    NiIPeek: peek for hdl 3 timed out (r; 1000ms)
    NiIRead: read for hdl 3 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () http://dpxxdisp.c 12168
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
    SiSelNSet: set events of sock 212 to: ---
    NiBufISelRemove: remove hdl 3 from set0
    SiSelNRemove: removed sock 212 (pos=3)
    SiSelNRemove: removed sock 212
    NiSelIRemove: removed hdl 3
    MBUF state OFF
    AdGetSelfIdentRecord: > <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 3 / sock 212
    NiBufIClose: clear extension for hdl 3
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 3132) http://dpxxdisp.c 10421
    Good Bye .....
    %%%%%%%%%%%%%%END of dev_disp%%%%%%%%%
    dev_w0
    %%%%%%%%%%%%%%START of dev_w0 trace file%%%%
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL 1
    ACTIVE TRACE COMPONENTS all, MJ
    B
    B Thu May 08 16:50:37 2008
    B create_con (con_name=R/3)
    B Loading DB library 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' ...
    B Library 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' loaded
    B Version of 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' is "700.08", patchlevel (0.144)
    B New connection 0 created
    M sysno 02
    M sid PI1
    M systemid 562 (PC with Windows NT)
    M relno 7000
    M patchlevel 0
    M patchno 144
    M intno 20050900
    M make: multithreaded, Unicode, 64 bit, optimized
    M pid 4316
    M
    M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    M length of sys_adm_ext is 576 bytes
    M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4316) http://dpxxdisp.c 1305
    I MtxInit: 30000 0 0
    M DpSysAdmExtCreate: ABAP is active
    M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M DpShMCreate: sizeof(wp_adm) 25168 (1480)
    M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
    M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
    M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
    M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M DpShMCreate: sizeof(comm_adm) 552080 (1088)
    M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M DpShMCreate: sizeof(slock_adm) 0 (104)
    M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M DpShMCreate: sizeof(file_adm) 0 (72)
    M DpShMCreate: sizeof(vmc_adm) 0 (1864)
    M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
    M DpShMCreate: sizeof(gw_adm) 48
    M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E70050, size: 6348592)
    M DpShMCreate: allocated sys_adm at 0000000010E70050
    M DpShMCreate: allocated wp_adm at 0000000010E72150
    M DpShMCreate: allocated tm_adm_list at 0000000010E783A0
    M DpShMCreate: allocated tm_adm at 0000000010E78400
    M DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
    M DpShMCreate: allocated appc_ca_adm at 00000000113E2060
    M DpShMCreate: allocated comm_adm at 00000000113E3FA0
    M DpShMCreate: system runs without slock table
    M DpShMCreate: system runs without file table
    M DpShMCreate: allocated vmc_adm_list at 000000001146AC30
    M DpShMCreate: allocated gw_adm at 000000001146ACB0
    M DpShMCreate: system runs without vmc_adm
    M DpShMCreate: allocated ca_info at 000000001146ACE0
    M DpShMCreate: allocated wall_adm at 000000001146ACF0
    M
    M Thu May 08 16:50:38 2008
    M ThTaskStatus: rdisp/reset_online_during_debug 0
    X EmInit: MmSetImplementation( 2 ).
    X MM global diagnostic options set: 0
    X <ES> client 0 initializing ....
    X Using implementation view
    X <EsNT> Using memory model view.
    M <EsNT> Memory Reset disabled as NT default
    X ES initialized.
    M ThInit: running on host vcerp99
    M
    M Thu May 08 16:50:39 2008
    M calling db_connect ...
    C Prepending D:\usr\sap\PI1\DVEBMGS02\exe to Path.
    C Oracle Client Version: '10.2.0.2.0'
    C Client NLS settings: AMERICAN_AMERICA.UTF8
    C Logon as OPS$-user to get SAPSR3's password
    C Connecting as /@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
    C 0 UTF8 1 00000000138E8FA0 00000000138F11D0 000000001390D9F8
    C Attaching to DB Server PI1 (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
    C Starting user session (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8,usrhp=00000000138F19E8)
    C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
    http://dboci.c 4532
    C Detaching from DB Server (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
    C *** ERROR => CONNECT failed with sql error '1033'
    http://dbsloci.c 11044
    C Try to connect with default password
    C Connecting as SAPSR3/<pwd>@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
    C 0 UTF8 1 00000000138E8FA0 00000000138F11D0 000000001390D9F8
    C Attaching to DB Server PI1 (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
    C Starting user session (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8,usrhp=00000000138F19E8)
    C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
    http://dboci.c 4532
    C Detaching from DB Server (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
    C *** ERROR => CONNECT failed with sql error '1033'
    http://dbsloci.c 11044
    B ***LOG BV3=> severe db error 1033 ; work process is stopped dbsh#2 @ 1199 dbsh 1199
    B ***LOG BY2=> sql error 1033 performing CON dblink#5 @ 431 dblink 0431
    B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress dblink#5 @ 431 dblink 0431
    M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) http://thxxhead.c 1440
    M in_ThErrHandle: 1
    M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) http://thxxhead.c 10468
    M
    M Info for wp 0
    M
    M stat = WP_RUN
    M waiting_for = NO_WAITING
    M reqtype = DP_RQ_DIAWP
    M act_reqtype = NO_REQTYPE
    M rq_info = 0
    M tid = -1
    M mode = 255
    M len = -1
    M rq_id = 65535
    M rq_source =
    M last_tid = 0
    M last_mode = 0
    M semaphore = 0
    M act_cs_count = 0
    M csTrack = 0
    M csTrackRwExcl = 0
    M csTrackRwShrd = 0
    M mode_cleaned_counter = 0
    M control_flag = 0
    M int_checked_resource(RFC) = 0
    M ext_checked_resource(RFC) = 0
    M int_checked_resource(HTTP) = 0
    M ext_checked_resource(HTTP) = 0
    M report = > <
    M action = 0
    M tab_name = > <
    M attachedVm = no VM
    M
    M *****************************************************************************
    M *
    M * LOCATION SAP-Server vcerp99_PI1_02 on host vcerp99 (wp 0)
    M * ERROR ThInit: db_connect
    M *
    M * TIME Thu May 08 16:50:39 2008
    M * RELEASE 700
    M * COMPONENT Taskhandler
    M * VERSION 1
    M * RC 13
    M * MODULE thxxhead.c
    M * LINE 10688
    M * COUNTER 1
    M *
    M *****************************************************************************
    M
    M PfStatDisconnect: disconnect statistics
    M Entering TH_CALLHOOKS
    M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm http://thxxrun1.c 724
    M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed http://thxxtool3.c 261
    M Entering ThSetStatError
    M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M Entering ThReadDetachMode
    M call ThrShutDown (1)...
    M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4316) http://dpnttool.c 327
    %%%%%%%%%%END of dev_w0 file %%%%%%%%%%%%
    trans.log
    %%%%%%%%%%%%START of trans.log %%%%%%%%%
    4 ETW000 r3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time : 08.05.2008 - 17:07:15
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: r3trans -d
    4 ETW000 trace at level 2 opened for a given file pointer
    4 ETW000 dev trc ,00000 Thu May 08 17:07:17 2008 0 0.000000
    4 ETW000 dev trc ,00000 db_con_init called 0 0.000000
    4 ETW000 dev trc ,00000 create_con (con_name=R/3) 0 0.000000
    4 ETW000 dev trc ,00000 Loading DB library 'dboraslib.dll' ... 0 0.000000
    4 ETW000 dev trc ,00000 load shared library (dboraslib.dll), hdl 0 79007 0.079007
    4 ETW000 dev trc ,00000 using "D:\usr\sap\PI1\SYS\exe\uc\NTAMD64\dboraslib.dll"
    4 ETW000 25 0.079032
    4 ETW000 dev trc ,00000 Library 'dboraslib.dll' loaded 11 0.079043
    4 ETW000 dev trc ,00000 function DbSlExpFuns loaded from library dboraslib.dll
    4 ETW000 254 0.079297
    4 ETW000 dev trc ,00000 Version of 'dboraslib.dll' is "700.08", patchlevel (0.144)
    4 ETW000 27697 0.106994
    4 ETW000 dev trc ,00000 function dsql_db_init loaded from library dboraslib.dll
    4 ETW000 21 0.107015
    4 ETW000 dev trc ,00000 function dbdd_exp_funs loaded from library dboraslib.dll
    4 ETW000 24 0.107039
    4 ETW000 dev trc ,00000 New connection 0 created 18 0.107057
    4 ETW000 dev trc ,00000 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000 32 0.107089
    4 ETW000 dev trc ,00000 db_con_connect (con_name=R/3) 14 0.107103
    4 ETW000 dev trc ,00000 find_con_by_name found the following connection for reuse:
    4 ETW000 13 0.107116
    4 ETW000 dev trc ,00000 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000 17 0.107133
    4 ETW000 dev trc ,00000 CLIENT_ORACLE_HOME is not set as environment variable or
    4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
    4 ETW000 assuming using instant client with unspecified location.
    4 ETW000 7122 0.114255
    4 ETW000 dev trc ,00000 Thu May 08 17:07:18 2008 252994 0.367249
    4 ETW000 dev trc ,00000 Oracle Client Version: '10.2.0.2.0' 21 0.367270
    4 ETW000 dev trc ,00000 -->oci_initialize (con_hdl=0) 12 0.367282
    4 ETW000 dev trc ,00000 Client NLS settings: AMERICAN_AMERICA.UTF8 191178 0.558460
    4 ETW000 dev trc ,00000 Logon as OPS$-user to get SAPSR3's password 22 0.558482
    4 ETW000 dev trc ,00000 Connecting as /@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    4 ETW000 20 0.558502
    4 ETW000 dev trc ,00000 Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
    4 ETW000 7651 0.566153
    4 ETW000 dev trc ,00000 0 UTF8 1 0000000007534090 000000000030DF10 00000000003136D8
    4 ETW000 77 0.566230
    4 ETW000 dev trc ,00000 Allocating service context handle for con_hdl=0 9578 0.575808
    4 ETW000 dev trc ,00000 Allocating server context handle 29 0.575837
    4 ETW000 dev trc ,00000 Attaching to DB Server PI1 (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
    4 ETW000 48 0.575885
    4 ETW000 dev trc ,00000 Assigning server context 00000000075530E8 to service context 0000000000313598
    4 ETW000 161629 0.737514
    4 ETW000 dev trc ,00000 Allocating user session handle 6490 0.744004
    4 ETW000 dev trc ,00000 Starting user session (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8,usrhp=000000000030E728)
    4 ETW000 39 0.744043
    4 ETW000 http://dboci.c ,00000 *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
    4 ETW000 130057 0.874100
    4 ETW000 dev trc ,00000 server_detach(con_hdl=0,stale=1,svrhp=00000000075530E8)
    4 ETW000 16 0.874116
    4 ETW000 dev trc ,00000 Detaching from DB Server (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
    4 ETW000 16 0.874132
    4 ETW000 dev trc ,00000 Deallocating server context handle 00000000075530E8
    4 ETW000 313 0.874445
    4 ETW000 http://dbsloci. ,00000 *** ERROR => CONNECT failed with sql error '1033'
    4 ETW000 9357 0.883802
    4 ETW000 dev trc ,00000 set_ocica() -> OCI or SQL return code 1033 13 0.883815
    4 ETW000 dev trc ,00000 Try to connect with default password 48 0.883863
    4 ETW000 dev trc ,00000 Connecting as SAPSR3/<pwd>@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    4 ETW000 15 0.883878
    4 ETW000 dev trc ,00000 Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
    4 ETW000 16 0.883894
    4 ETW000 dev trc ,00000 0 UTF8 1 0000000007534090 000000000030DF10 00000000003136D8
    4 ETW000 19 0.883913
    4 ETW000 dev trc ,00000 Allocating server context handle 9 0.883922
    4 ETW000 dev trc ,00000 Attaching to DB Server PI1 (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
    4 ETW000 26 0.883948
    4 ETW000 dev trc ,00000 Assigning server context 00000000075530E8 to service context 0000000000313598
    4 ETW000 7460 0.891408
    4 ETW000 dev trc ,00000 Assigning username to user session 000000000030E728
    4 ETW000 19 0.891427
    4 ETW000 dev trc ,00000 Assigning password to user session 000000000030E728
    4 ETW000 27 0.891454
    4 ETW000 dev trc ,00000 Starting user session (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8,usrhp=000000000030E728)
    4 ETW000 72 0.891526
    4 ETW000 http://dboci.c ,00000 *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
    4 ETW000 37125 0.928651
    4 ETW000 dev trc ,00000 server_detach(con_hdl=0,stale=1,svrhp=00000000075530E8)
    4 ETW000 16 0.928667
    4 ETW000 dev trc ,00000 Detaching from DB Server (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
    4 ETW000 16 0.928683
    4 ETW000 dev trc ,00000 Deallocating server context handle 00000000075530E8
    4 ETW000 313 0.928996
    4 ETW000 http://dbsloci. ,00000 *** ERROR => CONNECT failed with sql error '1033'
    4 ETW000 18 0.929014
    4 ETW000 dev trc ,00000 set_ocica() -> OCI or SQL return code 1033 9 0.929023
    4 ETW000 dblink ,00431 ***LOG BY2=>sql error 1033 performing CON dblink#5 @ 431
    4 ETW000 14700 0.943723
    4 ETW000 dblink ,00431 ***LOG BY0=>ORA-01033: ORACLE initialization or shutdown in progress dblink#5 @ 431
    4 ETW000 15 0.943738
    2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'PI1'"
    %%%%%%%%%%%END of trans.log %%%%%%%%%%%%%
    If u get more trace info, let me know, i will post them one by one.
    Thanks in Advance.
    Regards,
    Shroff Bhavik

    I am working on Windows 2003 Server Enterprise Edition x64.
    The Processor type is AMD Athelon X2 Dual Core.
    Whether JDK 1.4.2 for 64 bit is available ?
    I tried Lot of. Ultimately, I installed JDK 1.6.0.9 (for Windows x64 platform). 
    Anyway,
    My Problem is solved.
    Actually, in our PC, total 2 SATA Harddisks are installed and , u  know that, Control Files of Oracle  Instance is created & maintained ,simultaneously, at different location.
    One of th  HDD , was suddenly dismounted ,due to some technical reasons. origlogA and origlogB are  maintained on other (rather than System HDD).
    The problems related to version inconsistency of distributed CONTROL FIles occured while working, due to sudden dismount of other HDD.
    While the last stage of installation of SAP NW PI 7.0, the START and STOP of PI Server was occurred, but due to previously mentioned error, the Oracle instance (PI1) was not able to start, as the version of Control files was mismatched.
    I just notice the alert_PI1.log file , in which this Error was noticed.
    I just took one of the earlier version of Control File (that i thought was stable) from one of the location, and copied to the required location.
    Then again I tried to restart the Oracle  instance of PI1. It worked normally , and the PI1 Server started normally .
    Then, I resume the Installation of SAP NW PI 7.0, to complete those last 3-4 steps. The installation completed successfully with JDK 1.6.0.9 (for Windows x64 platform).
    Thanks a lot for your cooperations.

  • Installation Error SAP NW CE 7.1 Java on Windows 2003 SP2

    Hi folks,
    I am getting an installation Error when trzing to install the Preview Version of CE7.1
    Installation will terminate in Step 28 of 34 with the Message
    PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
    Anz Ideas how to terminate the Installation_
    Best Regards
    Chris

    Hi,
    I solved the issue bye updating jvm manually. Both jspm and update manager didn't update successfully.
    Thanl you for your support.
    Resolution (to support adobe document services for my specific instalaltion)
    Check JVM version in Netweaver u2013 open file
    c:\usr\sap\<NWinstance>\<NWnumber>\exe\sapjvmmanifest.mf. See SAP JVM version
    (e.g. sapjvm version: 5.1.055)
    If SAP JVM version is earlier than 5.1.0.55 apply the patch from SAP Note 1469491:
    1) Download patched JVM from the link provided in SAP Note 1469491 for
    required platform
    2) Unpack downloaded SAR archive using Netweaver SAPCAR tool
    3) Check JVM version and platform in file sapjvmmanifest.mf. E.g.
    sapjvm os: NTintel
    sapjvm version: 5.1.055
    u201Csapjvm osu201D should be the same as in the installed NW JVM u2013 see file
    c:\usr\sap\<NWinstance>\<NWnumber>\exe\sapjvmmanifest.mf
    4) Stop Netweaver services
    5) Substitute Netweaver JVM folders
    c:\usr\sap\<NWinstance>\<NWnumber>\exe\sapjvm_5 and
    c:\usr\sap\<NWinstance>\SYS\exe\jvm\NTI386\sapjvm_5.1.0xx by SAP JVM
    from the patch package
    6) Start Netweaver services

  • Installation of SAP Business One client and required administration rights

    Dear community,
    I would like to kindly ask you for your feedback on the installation of SAP Business One client and its patches on end-user computers.
    The pain points I have heard so far are the following:
    - The installation of SAP Business One client and its patches has to be started by a user with administrator rights.  As far as I know (and please correct me if I am wrong), this is also required in case of installation of any other software.
    - End users usually do not have administrator rights and therefore the SAP Business One clients have to be manually upgraded by administrator.  This is time consuming (and therefore costly) activity.
    We are considering to design a new solution which would overcome the above limitations.
    I would like to confirm with you if my understanding is correct:
    Question 1:
    Is it a common situation that the end-users of SAP Business One client do not have administrator rights and therefore cannot install the patches of SAP Business One client by themselves?
    If yes, how do you resolve this currently?
    Question 2:
    Do you use Microsoft System Center Configuration Manager or Active Directory (or any other 3rd party solution) to automatically distribute software packages and updates to client PCs at your customers?
    Question 3:
    If the SAP Business One client installation (and its patches) is delivered as MSI package with silent installation capability, would you be able to automate the deployment of B1 client updates to client PC using the abovementioned technologies? Or can you still see some obstacles?
    Thank you
    Best regards
    Jan Ruzarovsky
    SAP Business One Product Management

    Dear all,
    Thank you very much for your comments, very helpful!
    @Marco - SAP Business One 8.8 client currently does not support the silent installation / upgrade. However we are currently considering this requirement and we would like to deliver it as soon as possible.
    We are currently considering several possible designs. One of them is as follows:
    1. A new SAP Business One Updater Service will be installed on each client workstation.
    It will be a windows service installed and running under a local system account.
    2. The updater service will check regularly if there are any new patches of SAP Business One client or add-ons uploaded to a configured shared directory.
    3. If a new patch is found in the shared directory, the updater service will SILENTLY install the new patch (add-ons, SAP Business One) on the client workstation.
    The service would be able to install patches even if nobody is logged in.
    Questions:
    If we consider the above design, there are a few open topics:
    1. During the upgrade of the SAP Business One server, the client patches (and SAP add-on patches, partner add-ons) would be placed to a SHARED directory instead of into SBO-Common (as it is implemented currently).
    - Does this have any impact on your tools, processes or add-ons?
    2. SAP Business One upgrade wizard will put the latest patch of SAP Business One client into a configured shared directory. The shared directory will have to be read-only for everybody in the network to avoid that the valid installation files are replaced by malware or virus infected files
    - Can you configure such a shared directory? 
    From customer perspective, if a new patch is put into the shared directory, the updater service can behave as follows:
    1. Manually initiated upgrade of the client
    Example: Customer starts the old (not upgraded) SAP Business One client. The client will inform him/her that a new patch has been found and it has to be installed in order to continue working with the client. After customer clicks "Yes", the upgrader service starts the silent installation of the client and informs customer about the progress. Once the upgrade is finished, the upgraded SAP Business One client will be started automatically.
    2. Automatic update:
       - Update the client automatically (e.g. overnight) if customer is not working with SAP Business One
       - If SAP Business One client is running, ask customer if he/she wishes to upgrade the client now or to delay the upgrade by X minutes.
    Question: Which of the above two scenarios would you and your customers prefer?
    If the upgrade is fully silent, automated and handled by the upgrader service, Is it acceptable for customers to trigger the installation manually and wait till the client is upgraded? Or would they prefer to have the client updated for them e.g. overnight so they can immediately start to work?
    Best regards
    Jan
    Edited by: Jan Ruzarovsky on Sep 29, 2010 9:37 AM

  • Installation of SAP NetWeaver on Windows 2003 Server ( 32 Bit )

    Hello Gurus,
    I am planning installation of SAP Net Weaver - SR2 on Windows Server 2003 ( 32 Bit ) and oracle 10g is my database.
    can anybody guide me from where I can install the software coz in the market place SAP N/W-SR3 is available.
    Is SAP N/W - SR3 is recommeded for Windows 2003 Server ( 32 Bit ).
    Can any body guide me the process & my qurey.
    Thanks & Regards
    Shishir

    Read SAp note Note 1108852 - SAP NetWeaver 7.0 / Business Suite 2005 SR3: Windows
    it says:
    21/MAY/08
    SAP system installation only supported on 64-bit operating systems, except for  dialog instances
    As of SAP NetWeaver 7.0 SR3 and Business Suite 2005 SR3, SAP only supports to install dialog instances on 32-bit operating systems. All remaining SAP system instances (central instance, database instance, central services instance (SCS), ABAP central services instance (ASCS)) must be installed on 64-bit operating systems. Therefore the folder "SAP Systems" is not available on the "Welcome screen", when you start the installation from a installation master DVD for 32-bit.
    You might need to install dialog instances on 32-bit if you want to use 32-bit SAP NetWeaver components, such as Adobe document services. We recommend, however, to first check whether these 32-bit components can run on 64-bit operating systems. If so, we recommend to also use 64-bit systems for these components, including the dialog instance.
    If you want to install a non-productive SAP NetWeaver 7.0 SR3 based system (test systems or development are normally productive systems)  on 32-bit, proceed as follows:
          1. Install a SAP NetWeaver 7.0 SR2 (SAP ERP 2005 SR2, SAP CRM 5.0 SR2 SAP SCM 5.0 SR2, SAP SRM 5.0 SR2) system.
          2. Patch this system to SAP NetWeaver 7.0 SR3 (SAP ERP 6.0, SAP CRM 5.0 SR3, SAP SCM 5.0 SR3, SAP SRM 5.0 SR3).

  • Installation of SAP Dialog Instance on Window for SAP R/3 46C

    I am getting following error
    Info: R3SAPSYSTEMSERVICE_NT_IND SyCoprocessCreate 2 1002
    Creating coprocess E:\usr\sap\DQ1\D10\exe\SAPSTARTSRV.EXE ...
    Info: R3SAPSYSTEMSERVICE_NT_IND ExecuteDo 2 1002
    Test call to Service failed: 80070006
    E_HANDLE: The handle is invalid.
    Service not correctly installed.
    Info: R3SAPSYSTEMSERVICE_NT_IND ExecuteDo 2 1002
    RC code form SyCoprocessWait  = -1 .
    Error: R3SAPSYSTEMSERVICE_NT_IND ExecuteCheck 2 1002
    Exit code from E:\usr\sap\DQ1\D10\exe\SAPSTARTSRV.EXE: -1.
    Error: R3SAPSYSTEMSERVICE_NT_IND InternalInstallationDo 2 1002
    Phase failed.
    Error: R3SAPSYSTEMSERVICE_NT_IND InstallationDo 2 1002
    Phase failed.
    Error: Main {} 2 1002
    Installation aborted.
    I will appreciate you help, I have tried installing this with the domain administrator and <sid>adm user, it gave me the same error.
    Thanks
    Jagraj Dhillon

    This is as standard support question. An answer should be found in the <a href="http://service.sap.com/notes">SAP Notes</a> System.
    please consult SAP Note 142100.
    If you can not fix the problem with this note open a message at service.sap.com.
    Thank you
    Message was edited by: Peter Simon

  • Which CD contains the EP Installation for SAP R/3 470-620 ?

    Hi,
    I want to know which CD contains the EP installation for SAP R/3 47- 620, windows ,MS SQL server ?
    I have gone through SAP documentation for EP 6.0 installation.
    According to it, says that
    <i>1. To navigate to the J2EE Engine folder, on NetWeaver DVD, choose SAPINST > NT > I386.
         Double-click sapinst.exe.
    2. Navigate to SAP NetWeaver ’04 Java System (J2EE only) > MS SQL Server > Central System > Custom Installation – Java System      and choose Next.</i>
    But I am unable to find the directory J2EE on my CD ?
    Further my CD does have SAPINST.EXE, after excuting it the installation does not show option for <i>Central System > Custom Installation – Java System </i> only matching option available is  <b>Central Instance</b> .
    If you have any experience , please share .
    Regards
    Gurpreet Singh Sidhu

    Hello Gurpreet,
    For JAVA installationyou need to use Netweaver DVDs and not 4.7 CDs.  You need to install JAVA through Master Installation DVD ( in which you will find SAPINST.exe) and also make use of the JAVA DVD. Further for EP installation you will have to again make use of Master Installation DVD as well as JAVA DVD since the JAVA DVD has Netweaver Components also in it. Check you collection. You must have these DVDs in order to install EP 6.0. I hope you already have required JDK version on your installation machine.
    Regards.
    Ruchit.

  • Solution Manager Installation Error "SAP SOLUTION MANAGER 7.0 EHP 1"

    I am new to SAP and currently trying to install SOLMAN 7.0 EHP 1 on Windows Server 2008 R2. I have read the documentation also. For JDK I have used "j2sdkfb-1_4_2_24-rev-b06-windows-amd64.exe" which looks to be working fine.
    The installation process runs fine until it hits "Start Instance" the message on the bottom says "Starting instance xxx/DVEBMGSOO" (where xxx is my sid) and then its times out after 10 minute. After timing out I get the following error on the window.
    An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance ORC/DVEBMGS00 ABAP: UNKNOWN did not start after 10:00 minutes. Giving up.). You can now:
    Choose Retry to repeat the current step.
    Choose Log Files to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
    Though the installation steps are not fully completed but I do see SAP management Console and when I open it I see two process running "msg_server.exe" & "igswd.exe" The process dispwork.EXE starts in the beginning and then stops and stays stopped. I tried restarting all the process again but only tow of them starts and the process "dispwork.EXE" starts but then stops again. I also did a NEW installation considering a file could have been corrupted or something else but the installation process stops and the same place. I am sure ppl have installed SOLMAN on windows 2008 R2 and this error seems common to me. Please assist. Any tips would be nice.
    Edited by: amirsd on Aug 3, 2011 5:53 PM

    Hi,
    Please check the below
    1) ip/host entries should be in /etc/hosts
    2) patch the latest kernel for 2008 R2
    and re run installation
    Regards,
    Ram

  • Error during installation of SAP NetWeaver 2004s Abap Trial Version

    The following error occurred during installation of SAP NetWeaver 2004s ABAP Trial Version:
    ERROR 2008-03-13 09:47:27
    FSL-00001  System call failed. Error 53 (Network path not found.) in execution of system call 'CreateFile' with parameter (
    127.0.0.1\sapmnt\trans\bin\DOMAIN.CFG, GENERIC_READ|GENERIC_WRITE, FILE_SHARE_READ|FILE_SHARE_WRITE, NULL, CREATE_NEW, FILE_ATTRIBUTE_NORMAL, NULL), line (763) in file (synxcpath.cpp).
    This error occurred at the end of the installation.
    Any idea?
    Thank's, Thiago.

    >
    Thiago Amaral wrote:
    > Ps: I already restarted my notebook.
    That does not automatically start your instance. Have a look at the shortcuts SAP installed in your startmenu. There's both a startscript and a stopscript.

  • Installation of SAP SolMan 4.0 SR2 on AIX 5.3/Oracle

    We have already installed SolMan 4.0 successfully in our dev sys--so we know this can be done. Now we are trying to start the sapinst to install our prod system and can't get the SAPInstGUI to recognize the sapinst running on the same server.
    We have:
    -installed the newest IBM JDK 1.4.2 SR8
    -set SAPINST_JRE_HOME=/usr/java14_64/
    -set TEMP, TMP and TMPDIR
    When we run ./sapinst as root, it stops, apparently waiting for the GUI:
    Starting GuiServer using:
    /usr/java14_64/bin/java -cp /mnt/temp/sapinst_exe.360628.1190411815/JAR/instgui.jar:/mnt/temp/sapinst_exe.360628.1190411815/JAR/inqmyxml.jar -Djava.security.egd=file:/dev/urandom SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200
    load resource pool /mnt/bs2005/BS_2005_SR2_SAP_Installation_Master/IM_AIX_PPC64/resourcepool.xml
    guiengine: no GUI connected; waiting for a connection on host r09prd01, port 21200 to continue with the installation
    We have als attempted to start using ./sapinst -nogui and ./sapinst SAPINST_START_GUI=false, which gives the same message. We then try to start the SAPInstGUI as <SID>adm, the GUI will generate a screen with the following message:
    "Could not connect to host r09prd01 on port 21212. java.net.ConnectException: A remote host refused an attempted connect operation."
    What are we missing to get this install started?

    Hi,
    I am trying tom install SOLMAN4.0SR2 for ERP2005 IS RETAIL, here i am getting java error and i am not able  to continue installation. Error is java JDK does not a valid directory i am getting
    Os: SUN10/AMD64MACHINE
    Patches : followed as per sap note 908334
    Java version tried : 1.5.0,1.4.2_09,1.4.2_13,1.4.2_12 also.
    I am struggling since 3 days, please some one respong i am very much greatful to your hlep ... please help me
    Error:
    INFO 2007-09-27 21:38:08
    Execution of the command "/usr/jdk/j2sdk1.4.2_09/bin/java -classpath /tmp/sapinst_exe.4931.1190909239/JAR/ins-j2ee.jar -d64 com.sap.ins.j2ee.GetSystemProperty" finished with return code 1. Output: Unrecognized option: -d64Could not create the Java virtual machine.
    ERROR 2007-09-27 21:38:08
    MUT-03023  Directory /usr/jdk/j2sdk1.4.2_09 is not a valid JDK directory: execution of "/usr/jdk/j2sdk1.4.2_09/bin/java -classpath /tmp/sapinst_exe.4931.1190909239/JAR/ins-j2ee.jar -d64 com.sap.ins.j2ee.GetSystemProperty" finished with return code 1.
    ERROR 2007-09-27 21:38:08
    FCO-00011  The step setDefaults with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|1|0|setDefaults was executed with status ERROR .
    Regards,
    Sankaranarayanan.G
    BASIS CONSULTANT
    CHENNAI,INDIA

Maybe you are looking for