Installation of SAP products on older 32-bit serves

Hi,
I have a special testing project. We want to install multiple SAP products on older 32-bit servers. These will be used in a proof-of-concept testing.
we will install these products on Windows 2003 32-bit with 4GB of RAM
Products to be installed:
SAP ECC 6.04 (EHP4)
SAP PI 7.11 (EHP1)
SAP SCM  7.01 (EHP1)
I looked in the PAM but am not still clear if these products are allowed to be installed on 32-bit.
Note that performance is not important and that I udnerstand that with 4GB per server, It will be tight.
thanks.

thanks,
I found a note in the ECC6-EHP4 installation guide.
You need to consider the following constraints before you start your installation:.u2039m×ùs
Your operating system platform must be 64-bit.
NOTE
The only instance, you can still install on 32-bit is the dialog instance
I might install these products is SR2 mode and patch them afterward... or I will ask for 64-bit servers.
Thanks.

Similar Messages

  • Migrating SAP products from a non-SQL Server platform to a SQL Server 2005

    Hi,
    I have another question too.
    Can someone pls provide me the Considerations for Migrating SAP products from a non-SQL Server platform to a SQL Server 2005 platform?
    More specifically from Oracle to SQL 2005.
    Regards
    Abhi

    Hello
    You need to perform an OSDB migration.
    This will involve exporting your SAP system into a DB neutral format and then reloading this into an SQL 2005 SAP system.
    Please review http://service.sap.com/osdbmigration
    I recommend you review the homo/heterogeneous system copy guide for your SAP release.
    Thanks
    N.P.C

  • Installation of SAP Productivity PAK - Installation Guide

    Hi Everybody,
    We need to install SAP Productivity PAK . I am looking for more information on this in terms of Installation guide, pre-requisites, installation steps and configuration steps. I would appreciate if any of our members help me by sharing the relevant documents. Please share/send me the required info.
    Regards,
    AmKo

    Hi AmKo,
    Have you SAP Productivity PAK already downloaded from the SMP?
    If so, then please have a look at this KBA.
    [1600355|http://service.sap.com/sap/support/notes/1600355]- Installation files for SAP PRODUCTIVITY PAK 4.3
    Let me know if this helps,
    Kind Regards,
    Matthew

  • Installation of SAP NetWeaver on Windows 2003 Server ( 32 Bit )

    Hello Gurus,
    I am planning installation of SAP Net Weaver - SR2 on Windows Server 2003 ( 32 Bit ) and oracle 10g is my database.
    can anybody guide me from where I can install the software coz in the market place SAP N/W-SR3 is available.
    Is SAP N/W - SR3 is recommeded for Windows 2003 Server ( 32 Bit ).
    Can any body guide me the process & my qurey.
    Thanks & Regards
    Shishir

    Read SAp note Note 1108852 - SAP NetWeaver 7.0 / Business Suite 2005 SR3: Windows
    it says:
    21/MAY/08
    SAP system installation only supported on 64-bit operating systems, except for  dialog instances
    As of SAP NetWeaver 7.0 SR3 and Business Suite 2005 SR3, SAP only supports to install dialog instances on 32-bit operating systems. All remaining SAP system instances (central instance, database instance, central services instance (SCS), ABAP central services instance (ASCS)) must be installed on 64-bit operating systems. Therefore the folder "SAP Systems" is not available on the "Welcome screen", when you start the installation from a installation master DVD for 32-bit.
    You might need to install dialog instances on 32-bit if you want to use 32-bit SAP NetWeaver components, such as Adobe document services. We recommend, however, to first check whether these 32-bit components can run on 64-bit operating systems. If so, we recommend to also use 64-bit systems for these components, including the dialog instance.
    If you want to install a non-productive SAP NetWeaver 7.0 SR3 based system (test systems or development are normally productive systems)  on 32-bit, proceed as follows:
          1. Install a SAP NetWeaver 7.0 SR2 (SAP ERP 2005 SR2, SAP CRM 5.0 SR2 SAP SCM 5.0 SR2, SAP SRM 5.0 SR2) system.
          2. Patch this system to SAP NetWeaver 7.0 SR3 (SAP ERP 6.0, SAP CRM 5.0 SR3, SAP SCM 5.0 SR3, SAP SRM 5.0 SR3).

  • SAP Productivity Composer Installation

    Hi,
    Need your help!
    I am new to SPP and from quite some time I am stuck in installing SAP Productivity Composer. I had downloaded the same (SAP Productivity Composer by RWD 4.3 ) from SMP and got the HelpLaunch Pad pdf in it. However I didn't found the config files and uperform server installation guide in it.
    From RWDAdmin_41 pdf I got to know that we need to install the servers first and it says -
    "A complete set of hardware and software requirements for the server is included in the Technical
    Specifications document delivered with the uPerform software."
    Do we need to register at Ancile/RWD to get the files/software or I am completly wrong in my approach.
    Please help guys, need your help urgently.
    Thanks

    see if you have .sda files ? if yes, change it to be .zip.
    Then you should be able to extract it and install.

  • Where to find Installation Guide for SAP Productivity Pak 4.3

    We are in the process of installing Productivity Pak 4.3 for a new client. There is no installation guide for 4.3 in English. When I go to the link for the 4.1 installation guide, it is no longer available through that link.
    Can anyone point me to the installation guide in English?
    Thanks in advance,
    Joe
    UPDATE: I found the 4.1 administration guide (https://websmp204.sap-ag.de/~sapdownload/002007974700000806942010E/RWDAdmin_41en.pdf). Looks like 4.3 EN is not available yet.
    Edited by: Belluso Joseph on Aug 10, 2011 6:09 PM

    Hi Belluso,
    Glad you could find it.
    Just an FYI for everyone else.
    [1600355|http://service.sap.com/sap/support/notes/1600355] - Installation files for SAP PRODUCTIVITY PAK 4.3
    Regards,
    Matthew

  • SAP Productivity Pak for Us customer

    Hello Experts,
    We have a requirement from client to install the RWD productivity pak for training documents and I have heard this name first time and I already instaalled the Solman 7.1 and Dev box of CRM 7 EHP 1 and ECC EHP 5. I have below queries-
    1) Is basis responsible to install RWD Productivity pak.
    2) Do we need to install this software on each users machine or we need to install it on our ecc/solman/crm servers on each box (DEV,QAS, PRD).
    3) What are the installation steps and the prerequisites.
    4) Do we require extra hardware ? with some environment and if we require to integrate it with SAP with steps or guide.
    5) I checked it on service mkt place and version 4.3 and 4.4 is avl so which version should i prefer.
    Regards
    Saurabh Mishra

    sorry, too busy with messages these days.
    RWDuPerfServer43P_1-10009622.ZIP
    RWDuPerfServer43P_2-10009622.ZIP
    These are patch but not the installation file.
    For installation, goto:
    -> Service.sap.com/swdc
    -> Installations and Upgrades
    -> Browse our Download Catalog
    -> SAP Education Products
    -> SAP PRODUCTIVITY PAK BY Ancile
    -> SAP PRODUCTIVITY PAK 4.3 (or 4.4)
    -> Installation
    -> Downloads
    -> Product ID Application Instruction SAP Productivity Pak
    - Can we install database , application and search index on same machine ?
    Yes
    - OS is windows (2003, 2008, Win 7, Vista or XP ???), Is RWD only supported on 32 bit windows with IA processor or any processor ?
    64 bit can also be supported but Ancile programs are written for 32 bit. it can work with 64 but still on 32 bit mode.
    - Where can I find the installation document or all the prerequistes ?
    after extracting the packages downloaded from SMP, you will get the administration guide, which includes the installation guide.
    - Which database is preferable SQL, oracle or DB2 , currently we have SAP system on DB2
    emmm... SQL is simple to use. xxx doesn't like oracle. no idea for DB2....
    - Do we need to integrate the RWD with all SAP system landscapes ?
    If you want to use Help LaunchPad for All  the SAP systems, you will need to import the HLP addon to each of the system (ABAP side).
    - Also suggest the hardware requirement (RAMprocessorhard disk space) if 1 server installation is possible for all the req (Search Server + Database Server + Web Application Server + Administrator Workbench)
    Not much idea for sizing. depends on the workload...

  • Repost-- Facing Problems while installation of SAP NW PT 7.0 on Oracle 10.2

    Hello Friend,
    Sorry Friends, for my last long.....long...Post.....
    Here , i m reposting the same matter...Please help.
    We are trying to Install SAP NW PI 7.0 on Windows 2003 Server Enterprise Edition x64, with Oracle 10.2 - 64bit Edition.
    On this host, we already have installed SAP NW CE 7.1 with the same Oracle 10.2
    SAP NW CE 7.1 is working fine on this Host.
    First, we tried to install SAP NW PI 7.0 with jdk 1.4.2.16(32 bit), which was giving the error, while installation using SAPInst. So We installed jdk 1.5.0.15 (64 bit), at own risk. But, the Installation was interrupted due to some unknown error something like "SDM failed to deploy some components...etc....etc.". So, we installed jdk 1.6.0.6( which is perfect for Windows x64). With this , jdk 1.6.0.6 the last problem did not come and we reached at 9th step (of total 98th step of SAP NW PI 7.0 Installation), and was at "Prepare to install minimal Configuration", and controling START and STOP of System. Bu We found that, the System was not able to even start, at that 95th Phase.
    After that, we did lot of R&Ds to come out from the trouble.
    I am attaching the requied TRACE files, they are as followed.
    dev_disp.
    %%%%%%%%%%%%%START of dev_disp%%%%%%%%%
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno 02
    sid PI1
    systemid 562 (PC with Windows NT)
    relno 7000
    patchlevel 0
    patchno 144
    intno 20050900
    make: multithreaded, Unicode, 64 bit, optimized
    pid 3132
    Thu May 08 16:50:32 2008
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
              o
                    + SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (02 3132) http://dpxxdisp.c 1243
    shared lib "dw_xml.dll" version 144 successfully loaded
    shared lib "dw_xtc.dll" version 144 successfully loaded
    shared lib "dw_stl.dll" version 144 successfully loaded
    shared lib "dw_gui.dll" version 144 successfully loaded
    shared lib "dw_mdm.dll" version 144 successfully loaded
    rdisp/softcancel_sequence : -> 0,5,-1
    use internal message server connection to port 3902
    Thu May 08 16:50:36 2008
              o
                    + WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings http://dpxxtool2.c 5371
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >vcerp99_PI1_02 <
    DpShMCreate: sizeof(wp_adm) 25168 (1480)
    DpShMCreate: sizeof(tm_adm) 5652128 (28120)
    DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
    DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm) 552080 (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm) 0 (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm) 0 (72)
    DpShMCreate: sizeof(vmc_adm) 0 (1864)
    DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm) 48
    DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
    DpShMCreate: allocated sys_adm at 000000000EE70050
    DpShMCreate: allocated wp_adm at 000000000EE72150
    DpShMCreate: allocated tm_adm_list at 000000000EE783A0
    DpShMCreate: allocated tm_adm at 000000000EE78400
    DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
    DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
    DpShMCreate: allocated comm_adm at 000000000F3E3FA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
    DpShMCreate: allocated gw_adm at 000000000F46ACB0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F46ACE0
    DpShMCreate: allocated wall_adm at 000000000F46ACF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    <ES> Info: em/initial_size_MB( 3966MB) not multiple of em/blocksize_KB( 4096KB)
    <ES> Info: em/initial_size_MB rounded up to 3968MB
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 991 blocks reserved for free list.
    ES initialized.
    J2EE server info
    start = TRUE
    state = STARTED
    pid = 704
    argv[0] = D:\usr\sap\PI1\DVEBMGS02\exe\jcontrol.EXE
    argv[1] = D:\usr\sap\PI1\DVEBMGS02\exe\jcontrol.EXE
    argv[2] = pf=D:\usr\sap\PI1\SYS\profile\PI1_DVEBMGS02_vcerp99
    argv[3] = -DSAPSTART=1
    argv[4] = -DCONNECT_PORT=65000
    argv[5] = -DSAPSYSTEM=02
    argv[6] = -DSAPSYSTEMNAME=PI1
    argv[7] = -DSAPMYNAME=vcerp99_PI1_02
    argv[8] = -DSAPPROFILE=D:\usr\sap\PI1\SYS\profile\PI1_DVEBMGS02_vcerp99
    argv[9] = -DFRFC_FALLBACK=ON
    argv10 = -DFRFC_FALLBACK_HOST=localhost
    start_lazy = 0
    start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) http://dpxxdisp.c 1633
    ***LOG Q0K=> DpMsAttach, mscon ( vcerp99) http://dpxxdisp.c 11822
    DpStartStopMsg: send start message (myname is >vcerp99_PI1_02 <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    Thu May 08 16:50:37 2008
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet http://dpxxmbuf.c 1050
    DpMsgAdmin: Set patchno for this platform to 144
    Release check o.K.
    DpJ2eeLogin: j2ee state = CONNECTED
    Thu May 08 16:50:39 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) http://nixxi.cpp 4424
              o
                    + ERROR => NiIRead: SiRecv failed for hdl 4 / sock 184
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3822) http://nixxi.cpp 4424
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=704)
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Thu May 08 16:51:16 2008
              o
                    + ERROR => DpHdlDeadWp: W0 (pid 4316) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W1 (pid 1536) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W2 (pid 3388) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W3 (pid 3980) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W4 (pid 2980) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W5 (pid 4164) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W6 (pid 4656) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W7 (pid 4516) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W8 (pid 2576) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W9 (pid 960) died http://dpxxdisp.c 14532
    my types changed after wp death/restart 0xbf --> 0xbe
              o
                    + ERROR => DpHdlDeadWp: W10 (pid 3764) died http://dpxxdisp.c 14532
    my types changed after wp death/restart 0xbe --> 0xbc
              o
                    + ERROR => DpHdlDeadWp: W11 (pid 636) died http://dpxxdisp.c 14532
    my types changed after wp death/restart 0xbc --> 0xb8
              o
                    + ERROR => DpHdlDeadWp: W12 (pid 3896) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W13 (pid 4696) died http://dpxxdisp.c 14532
                    + ERROR => DpHdlDeadWp: W14 (pid 4072) died http://dpxxdisp.c 14532
    my types changed after wp death/restart 0xb8 --> 0xb0
              o
                    + ERROR => DpHdlDeadWp: W15 (pid 4808) died http://dpxxdisp.c 14532
    my types changed after wp death/restart 0xb0 --> 0xa0
              o
                    + ERROR => DpHdlDeadWp: W16 (pid 2832) died http://dpxxdisp.c 14532
    my types changed after wp death/restart 0xa0 --> 0x80
              o
                    + DP_FATAL_ERROR => DpWPCheck: no more work processes
                    + DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:26 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long) Thu May 08 11:21:26 2008
    ========================
    No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
    0 DIA 4316 Ended no 1 0 0
    1 DIA 1536 Ended no 1 0 0
    2 DIA 3388 Ended no 1 0 0
    3 DIA 3980 Ended no 1 0 0
    4 DIA 2980 Ended no 1 0 0
    5 DIA 4164 Ended no 1 0 0
    6 DIA 4656 Ended no 1 0 0
    7 DIA 4516 Ended no 1 0 0
    8 DIA 2576 Ended no 1 0 0
    9 DIA 960 Ended no 1 0 0
    10 UPD 3764 Ended no 1 0 0
    11 ENQ 636 Ended no 1 0 0
    12 BTC 3896 Ended no 1 0 0
    13 BTC 4696 Ended no 1 0 0
    14 BTC 4072 Ended no 1 0 0
    15 SPO 4808 Ended no 1 0 0
    16 UP2 2832 Ended no 1 0 0
    Dispatcher Queue Statistics Thu May 08 11:21:26 2008
    ===========================
    --------++++--
    +
    Typ      now      high      max      writes      reads
    --------++++--
    +
    NOWP      0      2      2000      6      6
    --------++++--
    +
    DIA      5      5      2000      5      0
    --------++++--
    +
    UPD      0      0      2000      0      0
    --------++++--
    +
    ENQ      0      0      2000      0      0
    --------++++--
    +
    BTC      0      0      2000      0      0
    --------++++--
    +
    SPO      0      0      2000      0      0
    --------++++--
    +
    UP2      0      0      2000      0      0
    --------++++--
    +
    max_rq_id 12
    wake_evt_udp_now 0
    wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
    since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
    Dump of tm_adm structure: Thu May 08 11:21:26 2008
    =========================
    Term uid man user term lastop mod wp ta a/i (modes)
    Workprocess Comm. Area Blocks Thu May 08 11:21:26 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id      owner      pid      eyecatcher
    --------++--
    +
    0      DISPATCHER      -1      WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:31 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >vcerp99_PI1_02 < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (5080) (SOFT_KILL)
    Stop icman
    killing process (1036) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    DpProcDied Process lives (PID:5080 HANDLE:304)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:32 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process died (PID:5080 HANDLE:304)
    wait for end of icman
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:33 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:34 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:35 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:36 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:37 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:38 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:39 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:40 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:41 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:42 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process lives (PID:1036 HANDLE:312)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=337
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu May 08 16:51:43 2008
    NiISelect: TIMEOUT occured (1000ms)
    DpProcDied Process died (PID:1036 HANDLE:312)
    DpProcDied Process died (PID:704 HANDLE:288)
    DpStartStopMsg: send stop message (myname is >vcerp99_PI1_02 <)
    NiIMyHostName: hostname = 'vcerp99'
    AdGetSelfIdentRecord: > <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 3 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 3 (r)
    NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
    Received 4 bytes from MSG_SERVER
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    Thu May 08 16:51:44 2008
    NiIPeek: peek for hdl 3 timed out (r; 1000ms)
    NiIRead: read for hdl 3 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () http://dpxxdisp.c 12168
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
    SiSelNSet: set events of sock 212 to: ---
    NiBufISelRemove: remove hdl 3 from set0
    SiSelNRemove: removed sock 212 (pos=3)
    SiSelNRemove: removed sock 212
    NiSelIRemove: removed hdl 3
    MBUF state OFF
    AdGetSelfIdentRecord: > <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 3 / sock 212
    NiBufIClose: clear extension for hdl 3
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 3132) http://dpxxdisp.c 10421
    Good Bye .....
    %%%%%%%%%%%%%%END of dev_disp%%%%%%%%%
    dev_w0
    %%%%%%%%%%%%%%START of dev_w0 trace file%%%%
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL 1
    ACTIVE TRACE COMPONENTS all, MJ
    B
    B Thu May 08 16:50:37 2008
    B create_con (con_name=R/3)
    B Loading DB library 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' ...
    B Library 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' loaded
    B Version of 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' is "700.08", patchlevel (0.144)
    B New connection 0 created
    M sysno 02
    M sid PI1
    M systemid 562 (PC with Windows NT)
    M relno 7000
    M patchlevel 0
    M patchno 144
    M intno 20050900
    M make: multithreaded, Unicode, 64 bit, optimized
    M pid 4316
    M
    M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    M length of sys_adm_ext is 576 bytes
    M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4316) http://dpxxdisp.c 1305
    I MtxInit: 30000 0 0
    M DpSysAdmExtCreate: ABAP is active
    M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M DpShMCreate: sizeof(wp_adm) 25168 (1480)
    M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
    M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
    M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
    M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M DpShMCreate: sizeof(comm_adm) 552080 (1088)
    M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M DpShMCreate: sizeof(slock_adm) 0 (104)
    M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M DpShMCreate: sizeof(file_adm) 0 (72)
    M DpShMCreate: sizeof(vmc_adm) 0 (1864)
    M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
    M DpShMCreate: sizeof(gw_adm) 48
    M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E70050, size: 6348592)
    M DpShMCreate: allocated sys_adm at 0000000010E70050
    M DpShMCreate: allocated wp_adm at 0000000010E72150
    M DpShMCreate: allocated tm_adm_list at 0000000010E783A0
    M DpShMCreate: allocated tm_adm at 0000000010E78400
    M DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
    M DpShMCreate: allocated appc_ca_adm at 00000000113E2060
    M DpShMCreate: allocated comm_adm at 00000000113E3FA0
    M DpShMCreate: system runs without slock table
    M DpShMCreate: system runs without file table
    M DpShMCreate: allocated vmc_adm_list at 000000001146AC30
    M DpShMCreate: allocated gw_adm at 000000001146ACB0
    M DpShMCreate: system runs without vmc_adm
    M DpShMCreate: allocated ca_info at 000000001146ACE0
    M DpShMCreate: allocated wall_adm at 000000001146ACF0
    M
    M Thu May 08 16:50:38 2008
    M ThTaskStatus: rdisp/reset_online_during_debug 0
    X EmInit: MmSetImplementation( 2 ).
    X MM global diagnostic options set: 0
    X <ES> client 0 initializing ....
    X Using implementation view
    X <EsNT> Using memory model view.
    M <EsNT> Memory Reset disabled as NT default
    X ES initialized.
    M ThInit: running on host vcerp99
    M
    M Thu May 08 16:50:39 2008
    M calling db_connect ...
    C Prepending D:\usr\sap\PI1\DVEBMGS02\exe to Path.
    C Oracle Client Version: '10.2.0.2.0'
    C Client NLS settings: AMERICAN_AMERICA.UTF8
    C Logon as OPS$-user to get SAPSR3's password
    C Connecting as /@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
    C 0 UTF8 1 00000000138E8FA0 00000000138F11D0 000000001390D9F8
    C Attaching to DB Server PI1 (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
    C Starting user session (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8,usrhp=00000000138F19E8)
    C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
    http://dboci.c 4532
    C Detaching from DB Server (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
    C *** ERROR => CONNECT failed with sql error '1033'
    http://dbsloci.c 11044
    C Try to connect with default password
    C Connecting as SAPSR3/<pwd>@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
    C 0 UTF8 1 00000000138E8FA0 00000000138F11D0 000000001390D9F8
    C Attaching to DB Server PI1 (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
    C Starting user session (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8,usrhp=00000000138F19E8)
    C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
    http://dboci.c 4532
    C Detaching from DB Server (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
    C *** ERROR => CONNECT failed with sql error '1033'
    http://dbsloci.c 11044
    B ***LOG BV3=> severe db error 1033 ; work process is stopped dbsh#2 @ 1199 dbsh 1199
    B ***LOG BY2=> sql error 1033 performing CON dblink#5 @ 431 dblink 0431
    B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress dblink#5 @ 431 dblink 0431
    M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) http://thxxhead.c 1440
    M in_ThErrHandle: 1
    M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) http://thxxhead.c 10468
    M
    M Info for wp 0
    M
    M stat = WP_RUN
    M waiting_for = NO_WAITING
    M reqtype = DP_RQ_DIAWP
    M act_reqtype = NO_REQTYPE
    M rq_info = 0
    M tid = -1
    M mode = 255
    M len = -1
    M rq_id = 65535
    M rq_source =
    M last_tid = 0
    M last_mode = 0
    M semaphore = 0
    M act_cs_count = 0
    M csTrack = 0
    M csTrackRwExcl = 0
    M csTrackRwShrd = 0
    M mode_cleaned_counter = 0
    M control_flag = 0
    M int_checked_resource(RFC) = 0
    M ext_checked_resource(RFC) = 0
    M int_checked_resource(HTTP) = 0
    M ext_checked_resource(HTTP) = 0
    M report = > <
    M action = 0
    M tab_name = > <
    M attachedVm = no VM
    M
    M *****************************************************************************
    M *
    M * LOCATION SAP-Server vcerp99_PI1_02 on host vcerp99 (wp 0)
    M * ERROR ThInit: db_connect
    M *
    M * TIME Thu May 08 16:50:39 2008
    M * RELEASE 700
    M * COMPONENT Taskhandler
    M * VERSION 1
    M * RC 13
    M * MODULE thxxhead.c
    M * LINE 10688
    M * COUNTER 1
    M *
    M *****************************************************************************
    M
    M PfStatDisconnect: disconnect statistics
    M Entering TH_CALLHOOKS
    M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm http://thxxrun1.c 724
    M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed http://thxxtool3.c 261
    M Entering ThSetStatError
    M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M Entering ThReadDetachMode
    M call ThrShutDown (1)...
    M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4316) http://dpnttool.c 327
    %%%%%%%%%%END of dev_w0 file %%%%%%%%%%%%
    trans.log
    %%%%%%%%%%%%START of trans.log %%%%%%%%%
    4 ETW000 r3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time : 08.05.2008 - 17:07:15
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: r3trans -d
    4 ETW000 trace at level 2 opened for a given file pointer
    4 ETW000 dev trc ,00000 Thu May 08 17:07:17 2008 0 0.000000
    4 ETW000 dev trc ,00000 db_con_init called 0 0.000000
    4 ETW000 dev trc ,00000 create_con (con_name=R/3) 0 0.000000
    4 ETW000 dev trc ,00000 Loading DB library 'dboraslib.dll' ... 0 0.000000
    4 ETW000 dev trc ,00000 load shared library (dboraslib.dll), hdl 0 79007 0.079007
    4 ETW000 dev trc ,00000 using "D:\usr\sap\PI1\SYS\exe\uc\NTAMD64\dboraslib.dll"
    4 ETW000 25 0.079032
    4 ETW000 dev trc ,00000 Library 'dboraslib.dll' loaded 11 0.079043
    4 ETW000 dev trc ,00000 function DbSlExpFuns loaded from library dboraslib.dll
    4 ETW000 254 0.079297
    4 ETW000 dev trc ,00000 Version of 'dboraslib.dll' is "700.08", patchlevel (0.144)
    4 ETW000 27697 0.106994
    4 ETW000 dev trc ,00000 function dsql_db_init loaded from library dboraslib.dll
    4 ETW000 21 0.107015
    4 ETW000 dev trc ,00000 function dbdd_exp_funs loaded from library dboraslib.dll
    4 ETW000 24 0.107039
    4 ETW000 dev trc ,00000 New connection 0 created 18 0.107057
    4 ETW000 dev trc ,00000 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000 32 0.107089
    4 ETW000 dev trc ,00000 db_con_connect (con_name=R/3) 14 0.107103
    4 ETW000 dev trc ,00000 find_con_by_name found the following connection for reuse:
    4 ETW000 13 0.107116
    4 ETW000 dev trc ,00000 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000 17 0.107133
    4 ETW000 dev trc ,00000 CLIENT_ORACLE_HOME is not set as environment variable or
    4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
    4 ETW000 assuming using instant client with unspecified location.
    4 ETW000 7122 0.114255
    4 ETW000 dev trc ,00000 Thu May 08 17:07:18 2008 252994 0.367249
    4 ETW000 dev trc ,00000 Oracle Client Version: '10.2.0.2.0' 21 0.367270
    4 ETW000 dev trc ,00000 -->oci_initialize (con_hdl=0) 12 0.367282
    4 ETW000 dev trc ,00000 Client NLS settings: AMERICAN_AMERICA.UTF8 191178 0.558460
    4 ETW000 dev trc ,00000 Logon as OPS$-user to get SAPSR3's password 22 0.558482
    4 ETW000 dev trc ,00000 Connecting as /@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    4 ETW000 20 0.558502
    4 ETW000 dev trc ,00000 Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
    4 ETW000 7651 0.566153
    4 ETW000 dev trc ,00000 0 UTF8 1 0000000007534090 000000000030DF10 00000000003136D8
    4 ETW000 77 0.566230
    4 ETW000 dev trc ,00000 Allocating service context handle for con_hdl=0 9578 0.575808
    4 ETW000 dev trc ,00000 Allocating server context handle 29 0.575837
    4 ETW000 dev trc ,00000 Attaching to DB Server PI1 (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
    4 ETW000 48 0.575885
    4 ETW000 dev trc ,00000 Assigning server context 00000000075530E8 to service context 0000000000313598
    4 ETW000 161629 0.737514
    4 ETW000 dev trc ,00000 Allocating user session handle 6490 0.744004
    4 ETW000 dev trc ,00000 Starting user session (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8,usrhp=000000000030E728)
    4 ETW000 39 0.744043
    4 ETW000 http://dboci.c ,00000 *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
    4 ETW000 130057 0.874100
    4 ETW000 dev trc ,00000 server_detach(con_hdl=0,stale=1,svrhp=00000000075530E8)
    4 ETW000 16 0.874116
    4 ETW000 dev trc ,00000 Detaching from DB Server (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
    4 ETW000 16 0.874132
    4 ETW000 dev trc ,00000 Deallocating server context handle 00000000075530E8
    4 ETW000 313 0.874445
    4 ETW000 http://dbsloci. ,00000 *** ERROR => CONNECT failed with sql error '1033'
    4 ETW000 9357 0.883802
    4 ETW000 dev trc ,00000 set_ocica() -> OCI or SQL return code 1033 13 0.883815
    4 ETW000 dev trc ,00000 Try to connect with default password 48 0.883863
    4 ETW000 dev trc ,00000 Connecting as SAPSR3/<pwd>@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    4 ETW000 15 0.883878
    4 ETW000 dev trc ,00000 Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
    4 ETW000 16 0.883894
    4 ETW000 dev trc ,00000 0 UTF8 1 0000000007534090 000000000030DF10 00000000003136D8
    4 ETW000 19 0.883913
    4 ETW000 dev trc ,00000 Allocating server context handle 9 0.883922
    4 ETW000 dev trc ,00000 Attaching to DB Server PI1 (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
    4 ETW000 26 0.883948
    4 ETW000 dev trc ,00000 Assigning server context 00000000075530E8 to service context 0000000000313598
    4 ETW000 7460 0.891408
    4 ETW000 dev trc ,00000 Assigning username to user session 000000000030E728
    4 ETW000 19 0.891427
    4 ETW000 dev trc ,00000 Assigning password to user session 000000000030E728
    4 ETW000 27 0.891454
    4 ETW000 dev trc ,00000 Starting user session (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8,usrhp=000000000030E728)
    4 ETW000 72 0.891526
    4 ETW000 http://dboci.c ,00000 *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
    4 ETW000 37125 0.928651
    4 ETW000 dev trc ,00000 server_detach(con_hdl=0,stale=1,svrhp=00000000075530E8)
    4 ETW000 16 0.928667
    4 ETW000 dev trc ,00000 Detaching from DB Server (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
    4 ETW000 16 0.928683
    4 ETW000 dev trc ,00000 Deallocating server context handle 00000000075530E8
    4 ETW000 313 0.928996
    4 ETW000 http://dbsloci. ,00000 *** ERROR => CONNECT failed with sql error '1033'
    4 ETW000 18 0.929014
    4 ETW000 dev trc ,00000 set_ocica() -> OCI or SQL return code 1033 9 0.929023
    4 ETW000 dblink ,00431 ***LOG BY2=>sql error 1033 performing CON dblink#5 @ 431
    4 ETW000 14700 0.943723
    4 ETW000 dblink ,00431 ***LOG BY0=>ORA-01033: ORACLE initialization or shutdown in progress dblink#5 @ 431
    4 ETW000 15 0.943738
    2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'PI1'"
    %%%%%%%%%%%END of trans.log %%%%%%%%%%%%%
    If u get more trace info, let me know, i will post them one by one.
    Thanks in Advance.
    Regards,
    Shroff Bhavik

    I am working on Windows 2003 Server Enterprise Edition x64.
    The Processor type is AMD Athelon X2 Dual Core.
    Whether JDK 1.4.2 for 64 bit is available ?
    I tried Lot of. Ultimately, I installed JDK 1.6.0.9 (for Windows x64 platform). 
    Anyway,
    My Problem is solved.
    Actually, in our PC, total 2 SATA Harddisks are installed and , u  know that, Control Files of Oracle  Instance is created & maintained ,simultaneously, at different location.
    One of th  HDD , was suddenly dismounted ,due to some technical reasons. origlogA and origlogB are  maintained on other (rather than System HDD).
    The problems related to version inconsistency of distributed CONTROL FIles occured while working, due to sudden dismount of other HDD.
    While the last stage of installation of SAP NW PI 7.0, the START and STOP of PI Server was occurred, but due to previously mentioned error, the Oracle instance (PI1) was not able to start, as the version of Control files was mismatched.
    I just notice the alert_PI1.log file , in which this Error was noticed.
    I just took one of the earlier version of Control File (that i thought was stable) from one of the location, and copied to the required location.
    Then again I tried to restart the Oracle  instance of PI1. It worked normally , and the PI1 Server started normally .
    Then, I resume the Installation of SAP NW PI 7.0, to complete those last 3-4 steps. The installation completed successfully with JDK 1.6.0.9 (for Windows x64 platform).
    Thanks a lot for your cooperations.

  • Add on for SAP B1 9.0 32 bit is disconnected

    Hi,
    I have developed a simple add on for SAP B1 9.0 32 bit. The add on is working fine in development environment. But while working on a Terminal Server client, the add on is getting disconnected after some time. This is happening for all terminal server users. Has anybody else faced a similar issue? Please suggest the possible reason and solution for this problem.
    Regards,
    Victor

    Hi Maik,
    1. The add on is getting connected initially, but is idle and is getting disconnected after some time. The addon is only listening to BOM and production order form events.
    2. I could not look at the client environment myself, but logging was enabled for any unhandled exception and still no log was generated. I am assuming that the application was not crashing. I will put in more information on Monday, when I get access to the client environment.
    Regards,
    Victor

  • Running SAP Business One on a 64-bit server

    One of our clients wants to upgrade their server to a 64-bit server running Windows Server 2008.
    What are the implications of this and do we also need to then use Microsoft SQL Server 2008?
    I went to this web link: https://websmp103.sap-ag.de/smb/sbo/platforms and found some info, but the questions I still have is the following:
    1. If we upgrade to SQL 2008, do we have to buy licenses or can we also just get an installation from SAP with our software (if we've gone live over 2 years ago already on SQL 2000, then upgraded to SQL 2005).
    2. Can we still stay on SQL 2005 or is it better to use SQL 2008 and what is the implications?
    I found the following on the link posted above:
    Mar 11: SAP Business One 2007 now supports Microsoft® SQL Server 2008.
    Microsoft SQL Server 2008 is now fully supported by SAP Business One 2007 A (as of patch 47) and SAP Business One 2007 B (as of patch 10), including SAP-developed add-ons.
    Jan 21: SAP Business One 2007 now supports Microsoft® Windows Server 2008.
    Microsoft Windows Server 2008 is now fully supported by SAP Business One 2007 A (as of patch 46) and SAP Business One 2007 B (as of patch 09), including SAP-developed add-ons. 64-bit and WTS support are still pending and will be announced when available.
    What exactly does the bold part mean?
    Any tips/hints on making this decision will be greatly appreciated!
    Thanks,
    Adele

    Hi Adele,
    "64-bit and WTS support are still pending and will be announced when available" means that Windows 2008 64bit has not been tested working with SAP Business One yet. Thus not supported (yet).
    Same applies to W indows T erminal S erver 32bit and 64bit.
    >
    Adele le Roux wrote:
    > 1. If we upgrade to SQL 2008, do we have to buy licenses or can we also just get an installation from SAP with our software (if we've gone live over 2 years ago already on SQL 2000, then upgraded to SQL 2005
    I am not sure if procedure as described in note [928839|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=928839] will apply. In order to get excact clarification I have asked the owner of the note to update it reagarding MSSQL 2008 licenses.
    >
    Adele le Roux wrote:
    > 2. Can we still stay on SQL 2005 or is it better to use SQL 2008 and what is the implications?.
    Yes, you can still stay on MSSQL 2005 and upgrade later to MSSQL 2008. The other way around will not work. MSSQL 2008 is currently supported only as of SAP Business One 2007 A PL47 or SAP Business One 2007 B PL10. Refer to [http://service.sap.com/smb/sbo/platforms|http://service.sap.com/smb/sbo/platforms].
    Regards
    Mario

  • Installation of SAP Business One client and required administration rights

    Dear community,
    I would like to kindly ask you for your feedback on the installation of SAP Business One client and its patches on end-user computers.
    The pain points I have heard so far are the following:
    - The installation of SAP Business One client and its patches has to be started by a user with administrator rights.  As far as I know (and please correct me if I am wrong), this is also required in case of installation of any other software.
    - End users usually do not have administrator rights and therefore the SAP Business One clients have to be manually upgraded by administrator.  This is time consuming (and therefore costly) activity.
    We are considering to design a new solution which would overcome the above limitations.
    I would like to confirm with you if my understanding is correct:
    Question 1:
    Is it a common situation that the end-users of SAP Business One client do not have administrator rights and therefore cannot install the patches of SAP Business One client by themselves?
    If yes, how do you resolve this currently?
    Question 2:
    Do you use Microsoft System Center Configuration Manager or Active Directory (or any other 3rd party solution) to automatically distribute software packages and updates to client PCs at your customers?
    Question 3:
    If the SAP Business One client installation (and its patches) is delivered as MSI package with silent installation capability, would you be able to automate the deployment of B1 client updates to client PC using the abovementioned technologies? Or can you still see some obstacles?
    Thank you
    Best regards
    Jan Ruzarovsky
    SAP Business One Product Management

    Dear all,
    Thank you very much for your comments, very helpful!
    @Marco - SAP Business One 8.8 client currently does not support the silent installation / upgrade. However we are currently considering this requirement and we would like to deliver it as soon as possible.
    We are currently considering several possible designs. One of them is as follows:
    1. A new SAP Business One Updater Service will be installed on each client workstation.
    It will be a windows service installed and running under a local system account.
    2. The updater service will check regularly if there are any new patches of SAP Business One client or add-ons uploaded to a configured shared directory.
    3. If a new patch is found in the shared directory, the updater service will SILENTLY install the new patch (add-ons, SAP Business One) on the client workstation.
    The service would be able to install patches even if nobody is logged in.
    Questions:
    If we consider the above design, there are a few open topics:
    1. During the upgrade of the SAP Business One server, the client patches (and SAP add-on patches, partner add-ons) would be placed to a SHARED directory instead of into SBO-Common (as it is implemented currently).
    - Does this have any impact on your tools, processes or add-ons?
    2. SAP Business One upgrade wizard will put the latest patch of SAP Business One client into a configured shared directory. The shared directory will have to be read-only for everybody in the network to avoid that the valid installation files are replaced by malware or virus infected files
    - Can you configure such a shared directory? 
    From customer perspective, if a new patch is put into the shared directory, the updater service can behave as follows:
    1. Manually initiated upgrade of the client
    Example: Customer starts the old (not upgraded) SAP Business One client. The client will inform him/her that a new patch has been found and it has to be installed in order to continue working with the client. After customer clicks "Yes", the upgrader service starts the silent installation of the client and informs customer about the progress. Once the upgrade is finished, the upgraded SAP Business One client will be started automatically.
    2. Automatic update:
       - Update the client automatically (e.g. overnight) if customer is not working with SAP Business One
       - If SAP Business One client is running, ask customer if he/she wishes to upgrade the client now or to delay the upgrade by X minutes.
    Question: Which of the above two scenarios would you and your customers prefer?
    If the upgrade is fully silent, automated and handled by the upgrader service, Is it acceptable for customers to trigger the installation manually and wait till the client is upgraded? Or would they prefer to have the client updated for them e.g. overnight so they can immediately start to work?
    Best regards
    Jan
    Edited by: Jan Ruzarovsky on Sep 29, 2010 9:37 AM

  • Installation of oracle8i on windows 2003 64 bit

    Hi,
    We have oracle 8.1.7 on windows 2003 32 bit, now we want to migrate our system to 64 bit windows with oracle 10.2.0.4.
    But when we we are trying to install oracle 8.1.7 on windows 2003 with 64 bit we receive below error.
    ORA-12546 tns permission denied.
    Kindly help us to resolve the same. as after installation of 8.1.7 we can be able to migrate the database to 10g.
    It is not possible to use import export due to application dependency.
    Kindly advice
    Abhay.

    ahk wrote:
    Hi,
    Thanks for the reply,
    After doing import of the production schema on the 64bit server with 10g.
    users are not able to log in into the application as password encryption description is not at all happening, as a result users are not able to log in to the application.What sort of password encryption? Did it have anything to do with the character set by any chance?
    Is it ok if we apply 8.1.7.4 patch on production server, move that backup on 64 bit server & directly migrate it to 10g 64bit. (While doing the testing we have applied the 8.1.7.4 patch on the 8.1.7.0 database on 32 bit & application worked fine with no problem)As you have indicated that there were problems getting the 8i installation to work on a 64 bit server, I would again advise to upgrade to 10g on the same server and then migrate to 64 bit edition on 64 bit server.

  • URGENT ::    STEPS For De-installation of SAP R/3 4.7

    Hi ,
    can anybody tell me what are the STEPS For De-installation of SAP R/3 4.7
    Points will be rewarded .
    Regards ,
    AMber S

    since when de-installing SAP is urgent?
    uninstall SAP: D:\usr\sap\PBW\SYS\exe\uninstsap.exe
    uninstall Oarcle:  Start -> program -> oracle - SID -> Oracle installation products -> universal installer... choose uninstall.
    or better yet:
    format c:

  • SAP Product and REACH Compliance 2.0 dese not add-on in SAP ECC 6.0 EHP5

    hi experts,
    I upgraded ECC 6.0 EHP5 and then try to add-on SAP Product and REACH Compliance 2.0 in SAP ECC 6.0 EHP5.
    I aleady knew REACH 2.0 is available with ERP 6.0 EHP5 through Note 1389561 - SAP PRC 2.0: Installation and upgrade for ERP 6.0 and SAP Note 1456663 - SAINT: Enhancement Package 5 components on NW 7.02.
    But unfortunately, When I try to install REACH 2.0 using SAINT, The error message was pop-up
    ========================================================================
    OCS package SAPK-360COINTDAGBCA does not match the current software component vector
    ========================================================================
    any idea pleas...
    For reference
    ==========================
    tp version : 720 patch 90
    R3trans version : 720 patch 89
    SPAM/SAINT : 7.02/43
    SAP_BASIS : 702 sp 07
    SAP/EA_APPL : 605 sp 04
    Thanks and regards,
    Jun

    Hi Jun,
    You could check the upgrade logs and traces at the location ../usr/sap/<sid>/upg/abap/logs.
    Check for the latest last changed logs. Mos probably a prerequisite package for the REACH 2.0 installation is not included in the upgrade. The detailed logs should mention which prerequisite is missing.
    Fore reference see thread: EHP4 upgrade error on SAPK-603DHINEAPS
    Regards,
    Srikishan

  • B1DE (AddOn Installer) for 64 bit server

    Hi All,
    I have a problem. One of my client has a 64 bit server. AddOn installation created with B1DE for SAP 2007 doesn't work on that server. After running SAP AddOn is trying to install, and then there is an error. Is there any way to create AddOn installation files that work on 64 bit server?
    Regards
    Hmg

    Both Robin and Owen are right... You need to run your code as forced 32 bit.
    The reason is the following:
    - A default project in Visual Studio is compiled as "Any CPU"
       - Any CPU means that you code will be executed as 32bit on a 32bit machine, and 64bit on a 64bit machine.
       - The Any CPU option is great for pure .NET (since all parts of it can run 32bit and 64bit)
       - In case of the SAP SDK and the AddonInstaller.dll, these are COM-based unmanaged code
          - If such unmanage code is not written to work with 64 bit, problems like yours can occur (this happens not only for SAP SDK... Tons of API out there have the same problems)
    - If you change the Any CPU option to the x86 option, you will force 64 bit mashines to run your code in "simulated" 32bit (Don't worry.. it is quite fast and gives no problems)
    We are you this with our 64 bit customers and without any problems...
    Lastly, if you wish to know more about this please hear the following podcast that describes the issue in detail (A good listen): http://www.dotnetrocks.com/default.aspx?showNum=341
    /Rasmus

Maybe you are looking for