Installation of scanning software on HP Officejet Pro 8600 Plus

My HP 4 in 1 printer is installed in a wireless mode and everything works except when I want to scan something an e-mail it to someone. Please help.

Hello @Haley05 ,
Welcome to the HP forum.
I understand that you are having a problem getting the scan to email feature, on your 8600 plus, to work.
I would like to help.
Are you getting some kind or error message?
Has the scan to email been setup properly?
Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Offi...
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

Unable to scan from my HP OfficeJet Pro 8600 Plus to my Mac iOS 10.10

Just purchased a new Mac and running Yosemite. Tried adding my 8600 and it prints but will not scan. When attempting to scan to computer, a message "The HP software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again." When I follow the link, it directs me to download the driver again.....and the cycle begins. I have tried completely uninstalling everything according to previous suggestions in the forum but nothing has helped.
I'm a new Mac user but just can't understand why this would work on my PC and not the new Mac.
This question was solved.
View Solution.

Hi castagmc,
Welcome to the HP Forums.
I see that you are having an issue when attempting to get the new Yosemite driver installed for the printer.
I do have some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please remove the usb cable from the printer and from the Mac and leave it disconnected until further notice.
I have a link that I am going to give you that gives detailed instruction for Uninstalling the Printer Software.
Once the uninstall is complete, please restart the Mac to have the changes take affect.
When the Mac is back up and running, disable any anti virus protection you may running. We do not want anything getting in the way when we reinstall.
The next step is to download and install the HP Officejet Pro 8600 series Full Feature Software and Drivers.
The installation will prompt you as to when to connect the usb cable so please do not connect it before hand.
Please feel free to write me back if you have any other questions.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Officejet pro 8600 plus Scans show up as blank pages on Macs okay on PCs

Scans made on HP Officejet Pro 8600 Plus show up okay on PCs buas blank pages on Macs. Any ideas? I can copy them into Publisher and then save it from Publisher as a pdf and Macs get it okay. Prefer not to have to do this

Hi @JimmyParker
I would like to help you scan to your Mac. I understand that currently your scans are showing up as black pages, but only when you scan to the Mac.
I suggest uninstalling and reinstalling the software. Please use the instructions below to complete a more comprehensive uninstall than the basic uninstall.
Scrub/ Uninstall
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
* Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
Click uninstall.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it.
HP Officejet Pro 8600 series Full Feature Software and Driver- OS X 10.9 Mavericks
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
When you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
Please let me know if you can scan now. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Officejet Pro 8600 Plus - Scan software doesn't have 8.5x11 letter size option

Just bought a new Officejet Pro 8600 Plus.
The included HP Scan software will only let me choose A4 or A5 paper sizes (as well as 6x4, 7x5, 8x6, 10x8). No 8.5x11 option, which is what I want to use most often. (this is from the dropdown options after clicking the "Scan..." button)
Is there something I'm missing? I'm generally pretty good at figuring this stuff out, but I haven't even seen this issue mentioned on forums, so I'm confused.
Also, when using the Scan To Computer function directly from the printer, I get the same result - it will scan my 8.5x11 document and output an A4 size file.
I'm running Mac OS X 10.6.8. I have installed all software and firmware updates I could find. I have my printer's region set to Canada, and bought the machine from a Staples in Canada. Wondering why I can't use any North American size formats?

@Simple1234 - I have reinstalled the software from HP's website, and no change. (it's actually the same version that came on the installation CD - 12.23).
@Sethaniel - I have definitely tried every combination of settings in those drop down lists, so that's not it.
Ruling out OS issues, my girlfriend is running 10.8, and the HP software is doing the same thing on her computer.
Using the System Preferences scanning method, I can choose paper sizes if set to scan from document feeder. If I change to flatbed, I have the option to manually type in the dimensions I want, but then I'm forced to manually drag the crop area to which 8.5x11 portion of the flatbed it will scan. Again, there's no way to just have the flatbed scan a letter size document automatically when placing the page at the top corner of the flatbed, where it shows you to place the page for letter size.
This seems like the most basic function of a scanner! I'm really perplexed by this. I would imagine most people in north america would just want to place an 8.5x11 sheet of paper on the flatbed and have an easy way to scan the correct size with no added fuss.
Printing works fine, and I can choose letter size, and many adjustable settings, so I think this is just a problem with HP's scanning software. I have tried all the usual basic steps, like restarting my computer & the printer, reinstalling software, running software update, looking through all the settings in the HP Scan software, any global settings I could change in System Preferences, tried using a different computer and OS X version, googling the issue, and posting on this forum.
Any other ideas?

HP OfficeJet Pro 8600 Plus - "Scan to Computer" issue on Mac OSX 10.8 or 10.9

Hi...
I have started experiencing the notorious "scan to computer not working" issue on my 1-month OfficeJet Pro 8600 Plus, after having used the feature a number of times flawlessly.
There are a lot of potential solutions mentioned in dozens of relevant posts for both Mac and Windows, e.g.:
"Failed to open a session on the device"...
Scan to computer does not work...
Problem scanning to computer with an 8600 wireless
Unable to enable print to computer...
Enable Scan to Computer - Communication Error
Officejet Pro 8600 Utility does not show my Mac computer in scan settings
A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning
HP Wireless All-in-One Printers - Communication Error between the Scanner and Your Computer...
Etc.
However, in my case, no solution works, after several frustrating hours of trying to fix the issue, in Mac OS X Mountain Lion (10.8), or after upgrading to Maverics (10.9).
The behavior of the device points to a software issue, since:
The printer is visible on the network
The print function has been working fine
The HP Scan function works
The generic Scan function from System Preferences works (although in earlier times it did not, or it stopped working soon after invoking it)
The "Scan to Computer" option does not appear in the HP Utility screen (although occasionally, after random sequences of unistalling and installing the software, it reappears)
The HP Installer crashes before completing the installation (this is a latest symptom, apparently happening before unvoking the HP Setup Assistant, which still works fine)
As already mentioned, I have tried all possible solutions, including software and firmware updates, Apple drivers, HP drivers (full featured software), clean (un)installations, followed by computer and printer restarts. Nothing seems to work.
The "Scan to Computer" feature of the 8600 always works on my Windows 7 laptop, after initial configuration.
The next step will be returning the device for a refund, but before resorting to that, I am giving it a last chance, in (the unlikely) case there is something new I have not tried yet.
Thanks,
PNS

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

[win7 64bit ultimate]: HP Officejet Pro 8600 Plus prints won't scan

Guys I have spent 2 days on reading and trying all of the suggestions in previous posts. My HP Officejet Pro 8600 Plus JUST won't scan. When I click to scan a Document or Photo the HP Scan pops up saying: The HP Officejet Pro 8600 was not found.
When I do unistall the HP basic software and then install again it works fine. However when pc restarts problem is still there.
I have completely uninstalled my avast Antivirus and also configured the windows firewall. No luck till now.
Tried the HP Print and Scan Doctor: It appears that the problem is in the device manager. Edited: Just looked at the device manager and spotted this >
If I reinstall it will work only till my next restart.
Any suggestions?

@N3CR4, welcome to the forums
I read about how you cannot scan and have been troubleshooting quite a bit lately, to no avail.
I have some questions and some ideas for you. If you've tried the steps, just let me know the results. Here are my ideas for you.
Have you uninstalled the printer by right clicking on them in the Device Manager, as shown in your screen shot, then restarted your PC and reinstalled?
Have you tried creating another User Account with Admin privileges and tried installing?
Try a clean boot, and restart the PC and ensure your Firewalls and Anti-Virus scanners are disabled and try running the installation.
Will the printer install successfully on another PC?
Remove the printer by using the Microsoft Fix it tool, restart the PC and try installing again.
Try unregistering and re-registering the Microsoft Windows Installer service:
1. Click the Start menu and type " cmd " in the search field and press enter.
2. Type in " msiexec /unregister " and then press enter.
3. Type in " msiexec /regserver " and then press enter.
4. Restart your PC and try the installation.
Run the SFC scan to repair any corupt files. (Run the scan 3 times if there is an issue in the results) then try installing the printer again.
Using System File Checker to Restore System Files
I really hope the steps help, let me know the outcome
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Missing HP Utility (Officejet Pro 8600 Plus); need to reinstall - cannot uninstall printer software

I had to wipe my iMac and resinstall IOS Mavericks (10.9.5). Printer (Officejet Pro 8600 Plus, 9N11g) is working, but will no longer scan (double-clicking icon results in "original item cannot be found") and the HP utility icon on dock is missing, replaced with a "?." I located directions to uninstall printer software so I can reinstall... but there is no longer any HP folder or "HP Uninstaller" on my Mac HD. Neither is there an HP folder within Library/Printers folders. Spotlight search shows no HP or Hewlett-Packard folders on my hard drive.
I have downloaded an "HPPPrinterDrivers3.0.dmg" and "HP-Injket-SW-OSX-Mavericks_v12.34.37.dmg," one of which I'm hoping will contain updated software/drivers to reinstall the printer and hopefully the HP Utility so I can regain scanning function, but I cannot figure out how to remove the current printer software, and I do not know if those are the currect files to use. I understand just deleting the printer will not suffice.
Can anyone provide step-by-step instructions on how to remove the software as well as installation (since I am unclear if I have the correct dmg files)? Thank you.
This question was solved.
View Solution.

Hi,
First I would suggest repairing the disk permissions, then try reinstalling the HP Software.
Follow the steps below to repair the disk permissions:
1. Open the the Applications folder.
2. Go to the Utilities folder.
3. Double-click on Disk Utility.
4. Select the hard drive containing the boot volume.
5. Go to the First Aid tab and select Repair Disk Permissions.
Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the process has been completed.
Once you are done, run the HP-Injket-SW-OSX-Mavericks_v12.34.37.dmg file and follow the steps on screen, be sure to select the HP Scan option while installing to get full functionality of the software.
Please try the steps above and let me know the results,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Configuring "Scan To E-mail" on HP Officejet Pro 8600 Plus N911g

This is the same issue reported by several other users in this forum to which no solution has been provided.
I have been unsuccessful in setting up the scan to e-mail option for a HP Officejet Pro 8600 Plus N911g purchased on August 12th 2012 and using the firmware CLP1CN1150CR.
I am trying to do this through the Embedded Web Server interface to the printer from an iMac running Mac OS X 10.6.8 and HP Utility 5.8.0. More specifically the page under "Scan -> Scan to E-mail -> Outgoing E-mail Profiles".
I have tried 2 different SMTP outgoing servers, each of which works well to send e-mail from the computer: Apple iCloud e-mail service (formerly known as Mobile Me, formerly known as .Mac) and AT&T Net e-mail service. I verified that the server name, port number and authentication login/password values were all correct.
When scan to e-mail is used from the printer, I get an error message: Cannot connect to server. Check server name and address.
When tested from the computer during the setup of an outgoing e-mail profile, I get an error message: The device could not send the test e-mail message. (EmailAccounts-timeout).
When I try to configure the page under "Settings -> E-mail Alerts -> E-mail Server" and use exactly the same values as the ones in the outgoing e-mail profile above, the Save and Test option fails with an error message: The device could not send the test e-mail message.
Interestingly enough, I am able to use the computer's e-mail client with the option Scan To Computer -> E-mail as PDF or E-mail as JPEG. With this option, the file is scanned and added as an attachment to a mail message from the Mail client under Mac OS X. When I press the Send button, the e-mail is sent successfully through the same SMTP server.
All the error messages seem to indicate that the printer's e-mail client software is unable to establish a connection to the SMTP server. However, it is not clear what configuration parameter is the one that could be causing the problem.
This question was solved.
View Solution.

After further research, I noticed that there are other possible default Simple Mail Transfer Protocol (SMTP) port values:
Port 25 is the standard SMTP port number.
Port 465 is the port number for SMTP over SSL, Secure SMTP (SSMTP).
Port 587 is the dedicated port number for a Mail Submission Agent (MSA) that uses a variant of the SMTP, as specified in RFC 6409, which requires that clients are authorized and authenticated to use the mail submission service.
I had been using port number 25 as this is the standard one. However, all tests were failing. Hence, I decided to try the tests with ports numbers 465 and 587.
Port number 465 failed with the same errors listed above. However, the tests passed with port number 587. After saving the successful configuration with port number 587, I tried the scan to e-mail option from the printer and it worked.
A mail submission agent (MSA) is a computer program or software agent that receives electronic mail messages from a mail user agent (MUA) and cooperates with a mail transfer agent (MTA) for delivery of the mail.
Historically in Internet mail, both MTA and MSA functions use port number 25. However, many Internet Service Providers (ISPs) and enterprise or institutional networks restrict the ability to connect to remote MTAs on port 25.
With a dedicated port 587, it is always possible for users to connect to their domain to submit new mail. Availability of a MSA on port 587 enables nomadic users to continue to send mail via their preferred submission servers even from within others' networks. Using a specific submission server is a requirement when sender policies or signing practices are enforced.
I know that many users may find the technical details boring or confusing, but I just wanted to include some background to those who actually care about this level of detail. I also wanted to provide a possible solution to other users who are experiencing the same problem.
So, in a nutshell, if the Scan To E-mail option is not working for you using port number 25, then try one of the other SMTP port numbers listed above. If none of them work, check your mail provider for other possible outgoing server port numbers.

Unable to Completely Scan Legal Size Documents with Officejet Pro 8600 Plus

I am trying scan legal sized documents on my new Officejet Pro 8600 Plus. I have reviewed the forums, and this has been a recurring problem in the past (see link--- http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Scanning-Legal-Size-Documents/m-p/35416#M14... ), but does not appear to be resolved. Whether I use the document feeder or the glass, the document is cut off at the bottom, and appears to be stopping at the 'A4' size, vs. legal. I cannot locate any setting on the scanner itself, or in the HP Utility software to change this, or even to be able to identify the current setting, if it is one.
I am using a Mac Pro, system 10.6.8, just installed and started using the printer a couple of days ago, and everything is up to date software-wise. Everything else on this machine has been working beautifully.
Can anyone identify what's going on here and how to correct it?
Thanks for your help--I specifically chose this particular unit over the next model down due to the legal sized glass/bed, and if I can't use it to scan legal docs, well, that's a problem. Thanks for your help!
This question was solved.
View Solution.

Hello,
Please try the following steps:
1. Open the HP Utility and select your device.
2. From Scan Settings open the "Scan to Computer".
3. Click the "Scan Tasks" tab.
4. Select the Scan Shortcut used to scan, then click Edit.
5. In the section of Scan from an HP Device click on the blue triangle to enlarge the menu.
6. From the enlarged menu now open the drop-down menu next to Crop To and set as None.
7. Click OK and try scanning again.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 8600 Plus e-All-in-One - terrible print & scan options

I just purchased an HP Officejet Pro 8600 Plus e-All-in-One an the print options look like they were written by someone from the 1990s. There are no options for lower resolution - only draft, normal, best and no option for black and white - other than grayscale. The print options box is the default box that was originally develped in the 1990s - no kidding. I also tried scanning some items and the box to see the scan is about 5" x 5" and there is absolutely no way possible to see what was scanned. I originally loaded the software using the disk provided witih the printer, but then I went on line and downloaded the "Full" version - which loaded exactly what was on the disk. I can not believe HP is even selling this thing with these types of drivers. I loaded the drivers onto my HP Desktop, running Windows 7 home, 64 bit and my HP laptop running Windows 7 Ultimate, 64 bit. Both HP computers are Intel I7 Quad core computers w/ 9 & 12 Gb of RAM respectively.
What gives? Do I need to return this thing because it certainly does not work properly and is not up to the HP standard we expect - especially for the $300 it costs to buy the thing. I bought this all in one because HP refuses to update the drivers of my older HP scanner to support Windows 7. That scanner showed the preview with a full screen, allowed me to change resolutions of scans, colors, etc.
Has anyone else experienced this type of garbage?

I agree the HP customer services and product services suck. I have an Officejet Pro 8500 and consistently had problems.
I think I'll change to a Cannon printer or another company. It is apparent that HP does not care.

Officejet Pro 8600 Plus won't print or scan wirelessly using Mac OS 10.

Mac OS 10.9
Wireless
My printer was working fine until today. Then when I used the control panel to scan a page I went through the steps and got to scanning and got the message I needed to enable "Scan to Computer" in the HP Utility. I went there and it was unchecked. Seems I had this problem every time I did a new scan job in the past. It wouldn't retain than check. So I checked it and after awhile I got the message "Communication Error" and to check my connections and if that didn't work restart my computer and printer. I did that and also restarted the router but it didn't help.
Then I tried printing from Word, which has always worked but it didn't this time. The printer icon on the right of the dock came up, bounced a few times then disappeared with nothing happening on the printer.
So I deleted and reinstalled the printer. No help. I downloaded and installed HP software and firmware updates. No help. I went through wireless setup. No help
BTW, all along I got good "Wireless Network Test" results. I says it's connected but nothing happens when I try any functions of the printer.
If I can find a USB cable I will try to see if wired works.
Any suggestions would be appreciated.

Hey @neoflyer,
I would like to assist you today with resolving the wireless printing and scanning issues you're experiencing on your HP Officejet Pro 8600 Plus e-All-in-One Printer on your Mac OS X 10.9 Operating System. You mentioned that you have powercycled the devices, reran the wireless setup, and uninstalled and reinstalled the software and drivers to no avail. I'm going to suggest a few additional troubleshooting steps to verify if this is a computer issue or a network issue.
Step 1: Gather the IP and Open the EWS:
1. On the screen of your printer select the wireless button:
2. Under the Wireless information you should see your IP address
3. Open up your internet browser on your Mac computer and in the website address bar just type in your IP address. Please do not include www.
4. After you enter your IP address in the website bar go to that website
5. If the website for your printer opens than that proves with 100% certainty that your printer and computer are 'talking' to each other on your wireless network. If the website fails to open than you have a network communication issue with your router.
If the website fails to open please powercycle your network again:
How to Properly Powercycle a Network:
First, unplug the power cable to your Router
Once your Router is unplugged, turn off your printer
Next, shut down your computer
After 30 seconds to 1 minutes, plug your Router back in
Next, turn on your printer
Turn on the computer
After a few moments check on your computer and ensure that the internet is working. Once it is, hit the wireless button again on the printer to see if your printer got a new IP address. Using the IP address enter it in the address bar of your internet browser and now see if the website for the printer opens.
If the website for the printer opens successfully please follow the steps below:
Step 1: Uninstall Drivers and Software:
From the computer desktop, double-click the Macintosh HD, and then click Applications.
Click the Hewlett-Packard folder.
Double-click the HP Uninstaller, and then click Continue.
Select the product to uninstall, and then click Uninstall.
When prompted, type the Administrator name and Password, and then click OK.
From the Macintosh HD menu, click Users.
Click the correct user name.
Click Library.
Click Preferences.
Click and hold the cursor on the first file that starts with "HP," and then drag the file to the Trash icon on the taskbar. Complete this step for each file that starts with "HP."
Close out of Preferences.
Click the Trash icon on the taskbar, click the Empty button, and then click OK to empty the trash.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
1. Please click the following link to download the appropriate Mac OS X 10.9 drivers for your printer: Mac: HP Officejet Pro 8600 series Full Feature Software and Drivers
2. Once downloaded, run through the step by step screens to reinstall your network printer
3. Once the printer is reinstalled, attempt a print and a scan!
Please let me know if these steps resolved your issue. Thanks for reaching out to the HP Support Forums. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Upgrade to WIN8.1 has downgraded software capability on HP Officejet Pro 8600 Plus

Help! I upgraded my pc to WIndows 8.1 (64Bit) and now I do not have an option in the software to scan a TIFF file or any photo format except jpg or pdf.
I upgraded my HP drivers to no availe.
Also, I seem to be able to only access the HP software through the Microsoft groups (big graphic squares on my start screen). I guess these are apps that have dumbed down the software for my all-in-one HP Officejet Pro 8600 Plus ?

Hello,
Please try the below steps..
uninstall the printer software.
Restart the PC
Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Thin horizontal black line at BOTTOM of page when scan on HP Officejet Pro 8600 Plus

I owned an HP Officejet Pro 8500 and scanning was perfect. I recently purchased an HP Officejet Pro 8600 Plus.
When I scan from the HP 8600 auto document feeder, I get a thin (several pixel wide) black line along the bottom edge of the resulting scan. This line will sometimes be slighly crooked or only appear across half the page, in which case it tends to get thicker toward the edge of the page). I believe this line is an artifact from scanning the very bottom edge of the oroginal document. I think it is showing where the bottom edge of the page was when scanned. If the document is a little skewed, then the black line at the bottom will be a little crooked, probably following the edge of the page. This problem is consistent, and repeatable. It happens in both "Scan To E-mail" mode and "Scan To Network Folder" mode.
When I scan from the flat bed, I get a very narrow black line along the very top edge of the resulting scan, but the bottom appears fine (although I've not tested this extensively).
These thin black lines did not occur when scanning from the HP 8500.
I am wondering if there is a setting to adjust this, or if it is a firmware difference between printers that needs debugging.
This question was solved.
View Solution.

I find it interesting that the issue happens across both printers. This is what leads me to believe this is something with the software/connection with the PC. One thing I will note is that you mentioned above using Adobe Reader 10.1.6. The latest version of Adobe Reader is 11.0.02. I would advise removing your current version of Adobe Reader and install the latest version.
I am not sure if this will fix the issue as you mentioned the line comes across in jpeg and other scanning styles. Do you possibly have another PC you could try setting up a connection with quickly and attempting a scan? This would be another way to ensure if the issue is coming from the printer or a connection/software issue.
I would like to make sure the issue is coming from the scanners on these printers before returning the printers as I would hate for you to get another model printer and the issue remain with this printer as well. However, I will note that the Laserjet Pro 200 is a nice series printer from my experience. I have used the Laserjet Pro 200 black and white only edition, the MFP, and the TopShot edition where I am located.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

HP Officejet Pro 8600 Plus suddenly has scan malfunctions

I have an HP Officejet Pro 8600 Plus which has worked fine up to one week ago. Now and for no apparent reason the scan function has decided to work intermittently. Whenever I use the HP software and use the scan option, the scanner starts up and does its pre-check, starts to scan and then either stops halfway or scans the document/picture but then saves a blank file or PDF afterwards.
I have done a semi-full reset on the printer and set it up again. No change. I have completely deinstalled all HP software, rebooted, reinstalled - no change. I have stopped and started services - no change.
This is driving me crazy as I bought the printer less than six months ago and was up to now pleased with it. All other functionality is working correctly. I can copy documents in a few seconds, printing works fine.
Tried to do a firmware update - message received that it is not applicable. Updated HP Software to newest version. No change.
I am using Windows 8.1 64 bit.
I would like to try a full reset, but don't have this option only the semi-full reset, when I access the service menu. If I cannot resolve this, then I am afraid it will be the last HP printer I ever buy as this has really cheesed me off.
Please help!

I don't wish to be the proverbial bearer of ill tidings but....after spending entirely too many hours talking with several HP tech support "technicians" and on HP support chat sessions with other "technicians," I can tell you that, so far, no one at HP has a clue how to solve this problem. Several times tech support used a remote session on my workstation, but after lots of "trial and error" efforts succeded in restoring the scan function only by running the HP Print and Scan Doctor. I have found that the HP Print and Scan Doctor will always restore the scan-to-computer function - it's a nuisance, but so far nothing else will do the job.
When the 8620 quits scanning, sometimes immediately after successfully scanning multiple documents, I find that my router "sees" the HP 8620 and I can successfully ping its IP address. I can even print(!) but the 8620 seems to be oblivious to its network connection for scanning.
Tech support has offered the usual "solutions" like: turn off the 8620 and turn it on again, update thr firmware, reinstall the driver, use an Ethernet or USB connection (which defeats the purpose of Wi-Fi), and even doing what I took to be a "hard" reboot (unplug the 8620 while power is on, wait 60 seconds, hold down the power button for 30 seconds, plug the AIO in while holding the power button). So far no one has suggested re-installing Windows.
Tech support even insisted that the cause of the 8620 failing to maintain its connection to the network was my having the 8620 draw its power through a multiple outlet power strip. Willing to try just about anything short of examining chicken entrails, I now have the same failure to scan with power coming directly from a 20 amp circuit outlet.
There was a time when a short call to HP tech support fixed the rare problems with HP products.

Officejet Pro 8600 Plus N911g - scanning stalls part way through

I have a HP Officejet Pro 8600 Plus N911g. When I try to scan a large number of documents from the printer to my computer, the printer stalls part way through. Today I had a stack of 45 pages that needed to be scanned. I loaded them into the document feeder on the top of the printer, hit "Scan", "To Computer", chose my computer from the list, "Save as pdf" and start scan.
The printer started scanning, got through about 30 pages and then just froze up. The display screen showed "Now Scanning". I let it sit for over a half an hour, but it did not resume. The only way to get out of the stalled scanning was to turn off the printer and restart it.
This has happened multiple times. Is there a limit on the number of documents that can be scanned at a time?

Hello aksnell,
Welcome to the HP Support Forums!
In my experience the Officejet Pro 8600 Plus would be best suited to scan such a large amount using the software provided. The printer has a internal memory of 128 MB, that will fill up very fast when scanning into the computer.
I would recommend opening HP Scan on the computer, select .PDF and scan the pages this way. It will still feed from the Automatic Document Feeder and also save all pages to a single file when done.
If you need a hand scanning using the software, replay back with the Operating System installed on your computer, Windows or Mac.
Thanks for posting.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Installation of scanning software on HP Officejet Pro 8600 Plus

Similar Messages

Maybe you are looking for