Installation of solaris 10 on 2 similar sparcs

Hi.
I have 2 t5120 sun enterprise systems. One is complete installed and RAID -1 was configured using hardware raid- raidctl on both systems.
I wanted to know if there is an easy way I can just take out the second disk (disk in right side slot when I am in front of front panel) from installed and running machine and insert into another t5120 in left slot ( I assume that it is going to be primary) and I will get a running OS on second machine without having to install OS again.
Is this doable ?I may be missing some steps , if so please correct me because last time I tried I got following errors :
Quote:
ERROR: boot-read fail
Boot device: net File and args:
Timed out waiting for Autonegotation to complete
Check cable and try again
Link Down
Timed out waiting for Autonegotation to complete
Check cable and try again
Link Down
Timed out waiting for Autonegotation to complete
Check cable and try again
Link Down
Timed out waiting for Autonegotation to complete
Check cable and try again
Link Down
ERROR: boot-read fail
Evaluating:
Can't open boot device
any ideas or is this not possible at all
Thanks

OK, so what are the options if we run the HCL check and come up with some incompatibilities??
I have Solaris 11/06 (from DVD media) installed on a brand new Dell Inspiron 530 (dual boot with XP). After the grub menu appears, and selecting 'Solaris', it takes about 3 minutes to get to a command line. I get a few errors at that time, such as:
file in / differ from the boot archive: /etc/path_to_inst
cannot find /etc/devices/mdi_ib_cache: no such file
I tried running 'svcadm clear system/boot-archive' and it seems to attempt to boot into a graphical CDE, but I just end up with an unintelligible multi-colored display, and need to power off.
I've checked the HCL and found some incompatibilities, but I don't know how to work-around these?
Running the Hardware compatibility test came up with the following:
No Solaris Driver
No Solaris Driver
Communication
Conexant
HSF 56k Data/Fax Modem
No Solaris Driver
No Solaris Driver
Network
Intel Corporation
*82562V-2 10/100 Network Connection*
No Solaris Driver
No Solaris Driver
Multimedia
Intel Corporation
HD Audio Controller
Can I simply disable the Modem and the HD audio in windows XP device manager, then reboot to Solaris, to get around these two (I tried this already)??
For the network card driver incompatibility, there is a Sun doc that says the workaround is to run: update_drv -a -i '"pci8086,1064"' iprb, but when I run this command at the initial Solaris command line, or try to edit any file for that matter, I get the error "read-only file system" Seems I have my hands tied in maintenance mode.
Thanks.

Similar Messages

How similar is x86 compared to Solaris 8 or 9 on SPARC?

How similar is x86 compared to Solaris 8 or 9 on SPARC?
Thanks.

Extremely similar. The vast majority of Solaris is built from the same source code for both platforms. You will find all of the same commands in places like /usr/bin and /usr/dt/bin.
Of course, the instruction sets are different. While all of the same commands may exist in those places and they implement the exact same functions with the exact same options, the binary files are different. You can't run x86 binaries on SPARC or vice versa.
While the Solaris binaries provide the exact same functionality, the same is not necessarily true with other packages that can be added. Sun's Java Enterprise System is supposed to eventually have all the same programs for SPARC and x86, and that is almost true already. StarOffice is only available for now for SPARC, but OpenOffice is available for both. Third party software may exist only for one or the other, but this is improving fast. A huge amount of Solaris x86 software can be installed from blastwave.org and other sites.
If you are a developer, there is a good chance that your code for SPARC will work on x86 with just a recompile. The system call APIs are identical. If it does not work with just a recompile, it is because you have a bug in your code or you used non-portable constructs like assuming a particular byte order (SPARC is big endian, x86 is little endian).
Solaris and most SPARC hardware both come from Sun, so of course Solaris supports all the hardware you are likely to find shipped with a SPARC machine. You can buy x86 machines from Sun, but you are likely to look elsewhere. Since Sun does not control what is in the machine, Solaris may not support all the hardware. Again, this situation is getting better. Still, you should consult Sun's Hardware Compatibility List. Note that Sun isn't good about saying this, but Solaris 9 supports all of the hardware in the Solaris 9 list and all of the hardware in the Solaris 8 list. You must look in both places to see what Solaris 9 supports.
Richard

Need Agent Installer for Solaris (SPARC)

Hi All,
I have downloaded Grid Control Agent Installer for Solaris from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html.
When I tried to extract the zip file, I am getting the following error message.
"Can not open file. It does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
Even I tried using http://sac.us.oracle.com/download/index.html also but getting the same error.
Please send me the location if you have,
Thanks
Sumathi

Most commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
So you can't get as close as you may want, but I'll bet it would still be helpful.
Darren

Installation error Solaris 10-u6-ga1

I must be missing something really obvious on the installation of Solaris 10 U6. I've come up against the error message upon manually partitioning, and using UFS. After the install the error is:
Solaris 10 10 software installation partially failed
Solaris 10 packages partially installed
SUNWlur
Then at reboot it loops and loops
If I install using ZFS no problem. Unfortunately I have to use UFS for this install.
I pulled down the sol-10-u6-x86-ga1 dvd and installed on an Vmware to see what I'd get. If I manually setup the drive, it fails to with the same error.
Here is my drive layout both sparc server and vmware(x86)
/ = 10 Gb
swap = 10 Gb
/etc = 10 Gb
/usr = 10 Gb
/var = 10 Gb
/export=remaining drive space.
I'm I missing something obvious?
thanks
bill

There should be more information in the install log about why the one package failed. If you search for the package name in the log you should be able find it. Then that might help determine whether the package can be installed on its own, possibly fixing your reboot issue.
-- Alan

11gR2 installation on Solaris failed with prereuisite 124861-15

The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.

Hi,
The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.
Refer my post *11gR2 Installation Error with patch 124861-15 as pre Req*
http://appsdbaworkshop.blogspot.com/2010/11/11gr2-installation-error-with-patch.html
thanks,
X A H E E R

Wu-ftpd installable for solaris 10 and solaris 9

Hi,
I could see only "proftpd" is available http://www.sun.com/software/solaris/freeware
But I am looking for the "wu-ftpd" server which is compatable with Solaris 9 and Solaris 10.
Any one help me from where I can get the "wu-ftpd" installable for solaris 9 and solaris 10 sparc server.
thanks,
Amudha

Hi Robert,
Thanks for your reply.
I too saw that the ftp version used in solaris 10 by default is wu-ftpd, but I am not sure about it, because when I tried to ftp to my solaris box the version it is started is not "FTP server (Version wu-2.6.2(5)".
I have got the wu-ftpd installable. But I could not get the proper document for configuring the same.
Question1: How to stop existing ftp service and start newly instlaled wu-ftpd in Solaris 9 and Solaris 10 servers?
Earlier solaris 8 version I change the ftpd version in /etc/inetd.conf file and give HUP signal to inetd then this new wu-ftpd version will be used.
Question 2: It always starts the system inbuilt ftp server and also I am getting ftp log in failure for any user which I add newly or even existing users.
could any one help to resolve these issues? Thanks in advance for your help.
Amdudha

Problem with ana 3.6 Installation on solaris 10

Hi,
I'm going to install Cisco Ana 3.6.5 on Solaris 10 and this is my first experience.
here are the information about my installation:
OS: Solaris 10 64-bit
Oracle 10g 10.2.0.3
I have installed Oracle and now when i try to install ana gateway , i get this Error Message:
- sheer doesnt exist, creating in /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf table space...
*** ERROR: Can not create table space /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf. ABORTING. ***
could you please help me?
Thanks in advance

I've solved the problem by setting password for scheme sheer to cisco !
- Enter the Oracle sid: MCDB
- Enter the Oracle admin username: system
- Enter the Oracle admin password: ********
- Enter the password for the scheme sheer: cisco
- Enter the location of the data files: /export/home/oracle/product/db_10g/oradata
- Enter the Oracle Listener port: 1521

1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk? 2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?

FYI....boot from SAN is required for physical server (T4-1) (not OVM).
1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
The SAN disks allocated are visible in ok prompt. below is the output.
(0) ok show—disks
a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
h) /iscsi—hba/disk
q) NO SELECTION
valid choice: a. . .h, q to quit c
/pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
Type “Y ( Control—Y ) to insert it in the command line.
e.g. ok nvalias mydev “Y
for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
(0) ok set—sfs—boot
set—sfs—boot ?
We tried selecting a disk and applying sfs-boot at ok prompt.
Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
As we know that ZFS is the default filesystem in Solaris 11.
We have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.
I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.

Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.

How to Add a Physical Interface After Installation in Solaris 10

How to Add a Physical Interface After Installation in Solaris 10
Hi Java Specialist,
I am trying to setup a network interface with the following steps on a new fresh Solaris 10 installation using the instruction titled How to Add a Physical Interface After Installation in Solaris 10 3/05 ONLY from http://docs.oracle.com/cd/E19253-01/816-4554/esxhb/index.html:
1. # ifconfig lo0 plumb up
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment prior to installing Solaris
10 on top of it.
3. # Added saturn to /etc/hostname.lo0.
4. # Added 10.56.8.101 to /etc/inet/hosts
5. # Added 10.56.0.0 255.255.240.0 to /etc/inet/netmasks
6.# reboot
However, the following errors kept recurring:
svcs –xv …. unable to qualify my own domain name,
failed with exit status 69.
Any idea on what other steps have I missed? I was hoping to only do step 3 – 6 for the change to apply permanently.
Many thanks,
Jack

Hi Java Specialist,... in a Solaris forum?
1. # ifconfig lo0 plumb upThe loopback connection (your lo0)is NOT a physical interface. There are no hardware components for it. Nor can I think of any reason why it should ever be anything other than the default 127.0.0.1
Use your favorite Internet search site (such as Google, Bing, Yahoo) to learn more about it.
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment ...I have no idea how a nonexistent software construct gets a DHCP address in a MS Operating System, unless you are confusing this with the "Microsoft Loopback Adapter" which is an utterly different concept. Again, go see what Google tells you.
<br>
<br>
<br>
... completely unrelated to configuring an IP...
unable to qualify my own domain nameAgain, search the Internet or even search these forums with that string of words.
Go back through your two most recent posts and read the responses again.
They seem to both be on the same topic as this new one -- configuring an IP on something.
How to initialize new IP address on secondary interface permanently
How to change IP address permanently on Solaris 10
When you've done all that, then come back and tell us what you are actually trying to do.

Solaris 8.0 on SUN SPARC 5 machine.

Can i install Solaris 8.0 on SUN SPARC 5 machines ?
Why can't i find it in the hardware compatibility list ?

Hi Solaris 8 is supported for Sparc Station 5 machines and should install just fine. However Solaris 8 is not supported on 4c architecture systems like the Sparc Station 1's and 2's...etc.
You can find a list of supported systems at the following URL:
http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-2221-10.pdf
Skip ahead to page 25 if you are looking just for supported machines.
Regards,
Andrew
Sun Developer Technical Support
Can i install Solaris 8.0 on SUN SPARC 5 machines ?
Why can't i find it in the hardware compatibility list

Installation of Solaris 9 Intel Version in Windows XP PC

I am very much interested in installation of Solaris 9 intel version in my PC which is windows XP version.
My PC Processor : AMD Athlon
I am not able to install solaris 9 in my PC.
Sun boot version is Sun OS secondary boot version 3.0.
During installation,i am going untill selection of type of installation. After selecting the Interactive type,the system is rebooting again without installing.
Select the type of installation you want to perform
(1) Solaris Interactive
(2) Custom Jumpstart
After selecting from above,the system is rebooting again without installing.
Please help me with the installation.

Try on HCL BigAdmins website to know if your hardware is supported

Installation of Solaris 9 intel version in windows XP

I am very much interested in installation of Solaris 9 intel version in my PC which is windows XP version.
My PC Processor : AMD Athlon
I am not able to install solaris 9 in my PC.
Sun boot version is Sun OS secondary boot version 3.0.
During installation,i am going untill selection of type of installation. After selecting the Interactive type,the system is rebooting again without installing.
Select the type of installation you want to perform
(1) Solaris Interactive
(2) Custom Jumpstart
After selecting from above,the system is rebooting again without installing.
Please help me with the installation.

Are you trying to install Solaris 9 onto a server that is already running Windows XP and to keep Windows XP too?
You'll need to create a partition on which to install Solaris, - search for Solaris Windows Dual Boot on docs.sun.com for more information.

SAP AS JAVA installation in Solaris Zone envirn throws OUT of Memory error.

Hi,
We are installing SAP NW2004s 7.0 SR3 AS JAVA on Solaris 10 in zone environment. Thsi was prod server getting build where on top of this we will install GRC 5.3.
We have faced no issues in development build.
But during the Prod build at databse create step, we are getting the below error
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
SAPinst log entries where error messages started:
04:43:58.128
Execute step createDatabase of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0
INFO 2011-04-01 04:45:14.590
Working directory changed to /tmp/sapinst_exe.16718.1301647358.
INFO 2011-04-01 04:45:14.595
Working directory changed to /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS.
INFO 2011-04-01 04:45:14.609
Working directory changed to /tmp/sapinst_exe.16718.1301647358.
INFO 2011-04-01 04:45:14.621
Working directory changed to /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS.
INFO 2011-04-01 04:45:14.850
Account oraac5 already exists.
INFO 2011-04-01 04:45:14.852
Account dba already exists.
INFO 2011-04-01 04:45:14.852
Account oraac5 already exists.
INFO 2011-04-01 04:45:14.853
Account dba already exists.
INFO 2011-04-01 04:45:14.867
Working directory changed to /tmp/sapinst_exe.16718.1301647358.
INFO 2011-04-01 04:45:14.899
Working directory changed to /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS.
ERROR 2011-04-01 04:45:32.280
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
. SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
ERROR 2011-04-01 04:45:32.286
MUT-03025 Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
ERROR 2011-04-01 04:45:32.453
FCO-00011 The step createDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
ora_sql_results.log
04:45:15 SAPINST ORACLE start logging for
SHUTDOWN IMMEDIATE;
exit;
Output of SQL executing program:
SQL*Plus: Release 10.2.0.4.0 - Production on Fri Apr 1 04:45:15 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Disconnected
SAPINST: End of output of SQL executing program /oracle/AC5/102_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-04-01, 04:45:15 SAPINST ORACLE stop logging
================================================================================
2011-04-01, 04:45:15 SAPINST ORACLE start logging for
STARTUP NOMOUNT;
exit;
Output of SQL executing program:
SQL*Plus: Release 10.2.0.4.0 - Production on Fri Apr 1 04:45:15 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
SAPINST: End of output of SQL executing program /oracle/AC5/102_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-04-01, 04:45:32 SAPINST ORACLE stop logging
Already viewed S-note
724713 - parameter settings for Solaris 10 - (Parameters are set as per this note)
743328 - Composite SAP note: ORA-27102 - (no much information in memory problem on zones)
Please provide your suggestions/resolution.
Thankyou.

Hi,
@ Sunny: Thanks for response, the referred note was already checked and parameters are in sync as per note.
@Mohit: SAP wouldn't proceed till create database if Oracle software was not installed. thanks for the response.
@Markus: Thanks I agree with you, but I have doubt in this area. Isn't it like project.max-shm-memory was new parameter we need to set in local zone rather using shmsys:shminfo_shmmax in /etc/system. Do we need to still maintain this parameter in /etc/system in global zone.
As per SUN doc below parameter was obsolete from Solaris 10.
The following parameters are obsolete.
■ shmsys:shminfo_shmmni
■ shmsys:shminfo_shmmax
As per your suggestion, do we need to set below parameters in that case, please clarify.
Parameter                           Replaced by Resource Control      Recommended Value
semsys:seminfo_semmni   project.max-sem-ids                      100
semsys:seminfo_semmsl   process.max-sem-nsems               256
shmsys:shminfo_shmmax project.max-shm-memory             4294967295
shmsys:shminfo_shmmni   project.max-shm-ids                       100
Also   findings of /etc/release
more /etc/release
Solaris 10 10/08 s10s_u6wos_07b SPARC
Regards,
Sitarama.

Access manager installation on solaris zone

Hi
I have installed the Access manager 7.0, Sun java system app server 8.1, Sun sirectory server 5.2 through JES installer on solaris 10 zone AM55-zone. Installer summarry is below, which shows installtion complete without error, but I am not able to launch the amserver login page.
Any suggestion, what I did wrong? any thoughts?
Sid
Installation Complete
Software installation has completed successfully. You can view the installation
summary and log by using the choices below. Summary and log files are available
in /var/sadm/install/logs/.
Your next step is to perform the postinstallation configuration and
verification tasks documented in the Postinstallation Configuration and Startup
Chapter of the Sun Java(TM) Enterprise System Installation Guide. See: http:
//docs.sun.com/doc/819-2328.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} 1
Installation Summary Report
Install Summary
Java Enterprise System : Installed
Sun Java(TM) System Message Queue 3 2005Q4 Enterprise Edition : Installed
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 : Installed
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server 5 2005Q4 : Installed
Sun Java(TM) System Access Manager 7 2005Q4 : Installed
Configuration Data
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 :
Domains and Instance Configuration Directory : /var/opt/SUNWappserver
Application Server Installation Directory : /opt/SUNWappserver
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /opt/SUNWcomds
Sun Java(TM) System Directory Server 5 2005Q4 :
Directory Server Admin User : admin
Directory Server Manager : cn=Directory Manager
Directory Server Identifier : AM55-zone
Directory Server Port : 389
Directory Server Root Suffix : dc=ipsolutionshowcase,dc=com
<--[33%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Directory Server Administration Domain : ipsolutionshowcase.com
System User : root
System Group : root
Existing Configuration Directory : 0
Configuration Directory Host : AM55-zone.ipsolutionshowcase.com
Configuration Directory Port : 389
Configuration Directory Admin User : admin
Existing User Directory : 0
User Directory Host : AM55-zone.ipsolutionshowcase.com
User Directory Port : 389
User Directory Admin User : admin
User Directory Suffix : dc=ipsolutionshowcase,dc=com
Disable Schema Checking : 0
Add Sample Entries : 0
Populate Database : 1
Sun Java(TM) System Access Manager 7 2005Q4 :
Access Manager Installation Directory : /opt
Access Manager Protocol : http
Access Manager Port : 8080
LDAP User ID : amldapuser
<--[66%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Administrator User ID : amAdmin
Web Container : AppServer
Access Manager Application Server Installation Directory :
/opt/SUNWappserver/appserver
Document Root : /var/opt/SUNWappserver/domains/domain1/docroot
Access Manager Console Host (for Existing console) : AM55-zone.
ipsolutionshowcase.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : AM55-zone.ipsolutionshowcase.com
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .ipsolutionshowcase.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : AM55-zone
Access Manager Directory Server Host : AM55-zone.ipsolutionshowcase.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : dc=ipsolutionshowcase,dc=com
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
<--[100%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} !
You have new mail in /var/mail/root
bash-3.00#
bash-3.00# cd /var/opt/mps/serverroot/slapd-AM55-zone
bash-3.00# ./start-slapd

Thanks samk,
After the installation, I have started the Directory server,admin,and console with following commands:
bash-3.00# directoryserver start
bash-3.00# directoryserver start-admin
SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 02:48
warning: daemon is running as super-user
[LS ls1] http://AM55-zone.ipsolutionshowcase.com <http://AM55-zone.ipsolutionshowcase.com> , port 390 ready to accept requests
startup: server started successfully
bash-3.00# directoryserver startconsole
Recieved the Login console window,logged in and got the ipsolutionshowcase tree.
What are the next steps I need to folow in order to launch the Access Manager page?
Ant thoughts?
Thanks for ye help
Sid

Unable to enter Agent name and port details while doing ODI (11.1.1.6) installation on Solaris

Unable to enter Agent name and port details while doing installation on Solaris, Installation wizard is moving slowly and at 'Specify Agent Details' page it is not allowing me to enter the details and now I am not able to continue installation.
Please let me know if I am missing anything and there is any solution.

just in case cross verify the certiication matrix for 11.1.1.6
http://www.oracle.com/technetwork/middleware/data-integrator/odi-11gr1certmatrix-163773.xls
Thanks,
Saichand

Installation of solaris 10 on 2 similar sparcs

Similar Messages

Maybe you are looking for