INSTALLATION OF SP1 FOR WINDOWS 7 32 BIT

MY WINDOWS UPDATE HAS BEEN TRYING TO INSTALL WINDOWS 7 SP1 FOR 3 YEARS. I HAVE WINDOWS 7 HOME PREMIUM 32 BIT.   IT FAILS EVERY TIME, OBVIOUSLY, WITH THE ERROR CODE 80073701.  CAN SOMEONE PLEASE TELL ME WHY IT WON'T INSTALL AND A POSSIBLE
SOLUTION.  IF I AM NOT ON THE CORRECT WEBSITE, PLEASE SUPPLY ME WITH THE CORRECT LINK.  PLEASE HELP!!!

Hi,
Please try the below three methods:
Method 1: Run the System Update Readiness Tool (checksur.exe)
Method 2: Uninstall unnecessary language packs
Method 3: Perform an inplace upgrade
For more information, please read the following article:
Error 0x80073701 appears when you try to install Service Pack 1 on Windows 7
http://support.microsoft.com/kb/2700530
Karen Hu
TechNet Community Support

Similar Messages

  • Visual Studio 2005 with SP1 for Windows 7 - 64 bit

    Hi,
    I am trying to install Visual Studio 2005 on a 64-bit platform (Windows 7). The version in about section reads Version 8.0.50727.42
     (RTM.050727-4200)
    I need to install the Service Pack 1 for Visual Studio 2005 but the installer available is for 32 bit (VS80sp1-KB932232-X86-ENU.exe)
    This does not install on 64 bit system. 
    How do I get Visual Studio 2005 with SP1 installed ? 
    P.S- On the network I work on, I can see a Windows 2008 (64 bit) system with the version of Visual Studio 2005 that reads  Version
    8.0.50727.762  (SP.050727-7600) but I dont know how that was installed. Any help would be
    appreciated.
    Thanks,
    Wilson 

    Hello WillisB,
    I think your concern is the name X86 here. Actually Visual Studio is x86 version and we do not have a x64 version Visual Studio. So if you install Visual Studio on X64 version, it is also available. And when you see this page
    http://www.microsoft.com/en-hk/download/details.aspx?id=7524 You can see the system requirements:
    Supported Operating System
                        Windows 7; Windows Server 2008; Windows Server 2008 R2; Windows Vista                
    Processor/RAM: 
    Vista hardware requirements.
    Required Software:  licensed copy of a Visual Studio 2005 and Visual Studio 2005 Service Pack 1.
    So please don't mind the name x86, the update can still be installed on Win 7 x64.
    By the way, to install Visual Studio 2005 on Win 7, please check YiChun's post on this thread:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/f75d8ff2-bed4-473b-bc9c-6faf78c5d83a/installing-visual-studio-2005-pro-on-windows-7-pro-64bit?forum=vssetup
    "To apply Visual Studio 2005 on Windows 7, please check the following points step by step:
    - Download Visual Studio 2005 SP1 and install it
    Visual Studio® 2005 Express Editions Service Pack 1
    Visual Studio® 2005 Service Pack 1 for Standard or above edition
    - Download
    Visual Studio 2005 Service Pack 1 Update for Windows Vista and install it
    - When launch Visual Studio 2005, please run it with administrator privileges
      (Right-click the icon >> "Run as Administrator")"
    By the way, Visual Studio 2005 is out of our mainstream support, what about change to use some new version of VS? For example, Visual Studio 2013 Community version.
    Best regards, 
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • TS1424 has anyone not been able to get the installer to properly load and get a message like: This installer is intended for 32 bit versions of windows. Please download and install 64 bit iTuines installer instead? and even if you uninstall and reinstall

    Has anyone not been able to get the iTunes installer to load properly and get a message like this: This iTunes installer is intended for 32 bit versions of windows. Please download and install 64 bit iTunes installer instead. I have tried repeatedly to get this to load, I have uninstalled iTunes completely and reinstalled and still get the same message. I have windows XP and a brand new ipod touch which I am trying to load.

    Yes, it's come up a number of times. If you look to the right under "more like this", you'll find threads that may offer useful suggestions.
    Regards.

  • When trying to download ipodreset utility for windows i get a message that says the installer is intended for 32-bit version for windows. what can i do next?

    when trying to download ipod reset utility for windows i get a message that the installer is intended for 32-bit version of windows. what can i do?

    I assume you have tried everything here?
    iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
    It doesn't mention 1442, but the same troubleshooting applies.
    It wouldn't hurt to also try another available USB port on your machine and another sync cable if possible.
    Lastly, try restoring the iPod on another PC or Mac running iTunes.
    If you know of somebody with a PC running Windows XP still, ask them if you can download the reset utility and use it to reset the Shuffle.
    B-rock

  • While installing latest version of iTunes error "This iTunes installer is intended for 32-bit versions of Windows. Please download and install the 64-bit iTunes installer instead" how to deal with it ?

    While installing latest version of iTunes error "This iTunes installer is intended for 32-bit versions of Windows. Please download and install the 64-bit iTunes installer instead" how to deal with it ?

    Doublechecking. What's the filename of the installer you've been downloading? (The 32-bit installer is called iTunesSetup.exe, and the 64-bit installer is called iTunes64Setup.exe.)

  • Windows update did not recognize the 1ST SP1 for windows 7 optiplex PC-now have 2 SP1

     windows SP1 for windows 7 PRO 64 bit for installing IE 11 -because Windows Update did not recognized 1st SP1--now I have 2 Sp1's‏
    HOW DO I CORRECT THIS PROBLEM BEFORE MORE UPDATES AND EVERYTHING GETS WORSE ???

     windows SP1 for windows 7 PRO 64 bit for installing IE 11 -because Windows Update did not recognized 1st SP1--now I have 2 Sp1's‏
    HOW DO I CORRECT THIS PROBLEM BEFORE MORE UPDATES AND EVERYTHING GETS WORSE ???
    Can't get you. What do you mean by 2 SP1's? Can you provide a screenshot?
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Installation of Safari for Windows 5.1.7 fails

    I have been setting up a new PC with Windows 7 (64-bit Home Premium). I have gotten QuickTime (32-bit) 7.7.3 and iTunes (64-bit) 10.6.3.25 installed apparently successfully (at least, iTunes works). But the Safari for Windows 5.1.7 installer gives the error message "This installer is intended for 32-bit versions of Windows.  Please obtain the 64-bit installer from http://www.apple.com/support/downloads/bonjourforwindows.html." and will not finish. I downloaded and apparently successfully installed Bonjour Print Services for Windows 2.0.2, but Safari still will not install. Does anyone have advice about how to get past that error?

    For anybody following the question posted here in this Community: I also posted my question in a different Community, where I received one reply and have posted updates:
    https://discussions.apple.com/message/20534176#20534176
    Nothing I have done has been successful, however, so Safari 5.1.7 for Windows could not be installed.

  • IPhone 4 AirPrint printing issue (AirPrint Installer 1.3 for Windows)

    I have been trying to get AirPrint working on my iPhone 4 (CDMA/Verizon) for a while now without success
    I know that the AirPrint feature is designed to work with AirPrint compatible HP WiFi printers (as Apple dropped support for OS X), though I have no plans on buying a new printer when I have 2 perfectly fine printers shared on the network, let alone one specifically designed to work with AirPrint
    I have tried out AirPrint Installer 1.3 for Windows (running on WinXP MCE 2005), but can't seem to get it to work properly
    After installing AirPrint Installer, I was able to see one printer from the iPhone (from a laser printer shared from another computer on the network), and was able to send a print command from the iPhone to the XP MCE computer, but I kept getting "Error-Printing" from the print que (on XP MCE)
    After sharing a printer connected locally (via USB), I was able to print from my iPhone once successfully, but nothing from the iPhone would show up in the que on XP MCE since
    Since then I have also shared the Microsoft XPS Document Writer (saves "printed" documents to an XPS file) as a way to tinker around with AirPrint without wasting paper, ink, and/or toner, and was unable to print from it
    Now whenever I attempt to print from my iPhone, I have the option of 3 printers, the shared laser on a different computer on the network, the local inkjet via USB, and the Microsoft XPS Document Writer, selecting any of them will then give me a message with an image of a piece of doggy eared paper saying "Printing to "<Printer Name>" Sending to Printer" as if it's about to print, but there is no change on XP MCE, the print cue shows nothing, and nothing prints and I don't get a popup asking where I would like to save (when using the XPS Document Writer), yet I can print fine from the computer itself
    Also, I have noticed that after a while, the printers will disappear from the list (on the iPhone) one by one, and I have to constantly uninstall and reinstall AirPrint Installer, only for it to not work again
    Am I doing something wrong? I have updated iTunes, I don't have a software firewall, and I am pretty sure I have installed AirPrint Installer 1.3 correctly
    I have also tried using AirPrint Activator and AirPrint Hacktivator on my MBA, but I only have Leopard on it (haven't upgraded to Snow Leopard yet, and may not for a while), so AirPrint Hacktivator will close unexpectedly (constantly), and AirPrint Activator gives me an error saying I need at least Snow Leopard, so I would really appreciate it if I could get AirPrint Installer 1.3 to work

    I have been having exactly the same problem as Mike's original problem as well as this problem as well. Originally, i couldn't get the iphone to see all my shared printers. I have an Epson RX580 ink jet all in one printer and a HP P1006 laser jet printer. They are both shared printers. Both are able to be printed to from other wired and wireless computers in my network. They are both showing as ready when I look at them in the printer/fax window.
    I'm using Window's XP SP3 with all the latest updates. I originally down loaded a german version of this AirPrint Installer 1.3. It didn't have all the bells this version does. After DL'ing this version AirPrint Installer 1.3, My Verizon Iphone 4 with 4.2 OS could see the printers on my network.
    When I try to print an email or picture. I takes me to the screen on the iphone to choose the printer I want to use. When I choose either printer and click the "Print" button, it takes me to a screen that says "Communicating with Printer" with an image of a page of paper with the edge turned down. After about 30-45 seconds the screen reverts back to the email or picture. After another min or so, a message will pop up saying that the printer is offline with one button that says cancel and another button that says continue.
    If I look at the print que for the printers, there is nothing in the que, but when I high light the printer in the printer/fax window some extra options become available that aren't there if there are really no jobs in the cue. One of the options on the left is the option to cancell all print jobs. When I click this, the computer looks like it does something cause the screen kind of flickers and then the option dissappears.
    I would really like to be able to print pic's straight from my iphone and would love to get this working. Would really appreciate any help with this issue.

  • I can't finish the installation of Itunes for windows. at the end of the installation I get an error. How can I install this programm?

    I can't finish the installation of Itunes for windows. at the end of the installation I get an error. How can I install this programm?

    See if the user tip: https://discussions.apple.com/docs/DOC-6562 helps out with your problems.

  • Installation of SP1 for SharePoint 2013

    After Installation of SP1 for SharePoint 2013,I see a new button Office 365 but when I click on it I can't go in anymore.So,Is that what i need to look to go in and work?
    is we required to connect to Internet?

    Hi,
    According to your post, my understanding is that after Installation of SP1 for SharePoint 2013, you saw a new button Office 365.
    As part of the SharePoint 2013 Service Pack 1, Microsoft has starting to provide some way to implement a sort of hybrid mode – as we can already have with Exchange – with Office 365.
    A new link/option shown in the Quick Launch menu on the left or in the Central Administration home page.
    After clicking the Office 365, the two links provide you a way to configure a first level integration with your Office 365 to use Yammer (as this now included on Office 365 Enterprise plans) or OneDrive for Business on Office 365.
    For more information, you can refer to:
    SharePoint 2013 – SharePoint 2013 SP1 includes settings to configure Office 365 integration
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Configuration Manager 2012 SP1 for Windows XP\Win 7\Win 8\Win 8.1 to Windows 8.1 Update 1

    Hi Team,
    We have Configuration manager 2012 SP1 and we have requirement to migrate winXP\Win7\Win8\Win8 systems to Windows 8.1 update 1. We are looking for supporting replace, refresh and baremetal OS deployments. Can anyone give some pointers for things we need
    to take care while planning approach for migrations. OS image for windows 8.1 update 1 are created through MDT 2013 and we are planning to use Config manager 2012 SP1 for deploying these images with above scenarios.
    Regards,

    More info:
    Operating System Deployment in Configuration Manager
    http://technet.microsoft.com/en-us/library/gg682018.aspx
    OSD in System Center 2012 Configuration Manager
    http://www.microsoft.com/en-us/download/details.aspx?id=42959
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SP1 for Windows 7 via Software Update (SCCM)

    Hi,
    I was wondering if there are any known issues of deploying Service Pack 1 for Windows 7 via Windows Updates? I was planning to deploy SP1 but wanted to make sure if there are not any potential issues in doing that.
    Thanks

    There is nothing wrong with using the software updates feature for deploying service packs, as it will simply do its job. It's more that I prefer to keep service packs out of the software updates to prevent any issues with (accidental) deployments.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Where can I find Java As installation try version for window?

    The snd\download only have version for Unix. Can any one help me to find one for window? Thank you very much.

    See at CE (Composition Environment) download page:
    http://www.sdn.sap.com/irj/scn/nw-ce-downloads

  • Oracle Universal Installer not working for 64 bit

    Hi all, since I could not get the 32 bit ODP to work for me I decided to try the 64 bit but when I proceed to lauch the 64 bit installer I get the following message on my 64 bit machine.
    Java(tm) 2 Platform Standard Edition binary has stopped working.
    A problem caused the program to stop working correctly. Windows will close the program, and notify you if a solution is available.
    Does anyone know why this might be?
    Thank you,
    John

    I am not sure what an SO is.
    As for the OS that I am using. My client Development Machine is running x64 Vista Ultimate and so far nothing works on it.
    I am trying to programatically connect to an Oracle Express Edition on a Linux machine that has the same hardware as my dev server above (AMD 64).
    I am also trying to not vent on this forum about the poor quality of product that I have experienced so far with Oracle as nothing that I have installed so far has worked. Please see my other recent Posts.
    Thank you,
    John

  • Firefox installer not working for Windows 8.1?

    I downloaded the latest Firefox installer and tried to run it. I got the Windows prompt to accept the software install, and then...... nothing. The installer never runs. Does anyone know what seems to be the issue?

    Jscher you rock! That totally worked.
    Thank you for saving me from being condemned to using IE!

Maybe you are looking for

  • Opening pdf appln from forms 6i when clicking on a blob field-extremely urgent please

    I was browsing through the discussion forum for my requirements and found the following code for opening a column value (a blob field) into an application. I wrote this following code in 'when-mouse-doubleclick' for the blob field in question, in for

  • I Pod Update Problems

    This message appears when I try to update my I Pod. The software works for playing music from my library, but my I Pod can't sync with the new updates. There is a Problem downloading the I Pod software for the I Pod "Phil's I Pod". An unknown error o

  • What usb keyboards are compatible with the Intel iMac

    Please can someone tell me what USB Apple Keybouards are compatable with the intel Imac howard

  • How to read value of OVS Input field on pressinf of F4

    In my case I have to read value from context node as I am skipping the phase 1 of  on OVS PHASE MODEL but not sure how to read the value from context element METHOD on_ovs .   DATA: lo_nd TYPE REF TO if_wd_context_node,         lo_el TYPE REF TO if_w

  • How to Remove Employee Photo

    Hi Experts, I have uploaded photos of employees by using OAAD. But Some mismatches found after cross checking. Am not able to delete the assigned photos. Please guide me how to delete or remove the photo. Thanks, K Sanj.