Installation of the ST-PI 2005 plug-in

Hi,
I have installed the ST-PI 2008 plug-in as the RTCCTOOL tool had requested, but now the u201CSAP earlywatch service reportu201D keep informing than I need the ST-PI 2005 plug-in with patch level 0008.
The problem is that the SAINT tool doesnu2019t recognize the files of the ST-PI 2005 so I canu2019t install this package. The files dosenu2019t appears on the SAINT window to be uploaded. I donu2019t know if I have to uninstall the ST-PI 2008 first? Is it possible? Does someone have any suggestion?
The section of the Service Report which shows the problem to be solved:
3.3.2 ST-PI and ST-A/PI Plug-Ins
The table below shows the implemented service plug-ins, their releases, and patch levels as well as the recommended releases, patch levels, and recommendations.
Plug-In      Release     Patch Level      Rec. Release      Rec. Patch Level
ST-PI      2008_1_640      0000      2005_1_640      0008        ST-PI is not up to date.
Please run RTCCTOOL and follow the given recommendations.     note 539977
Regards,
Fernando.

We had the same issue and i have open a OSS message and this is the reply.
Unfortunately the check in this section does not 'understand' that
ST-PI 2008_1 is newer than ST-PI 2005_1. However, we have the following
information from the developer:
"..This bug has been fixed for SP01 of ST-SER 701_2008_2 which will be
available on February 9, 2009. Since the necessary changes are performedvia table entries and not by changes of coding, it is not possible to
create an SAP Note..."
So currently, we have to wait until February 9, 2009 to fix this bug.
may be this help
Regards,
Subhash

Similar Messages

Dependencies between the SAP R/3 Plug-In (PI) and the SAP Basis Plug-In (PI

Hi All,
SAP declare:
"SAP R/3 Plug-In Support Package 10 for SAP R/3 Plug-In 2004.1 (scheduled for delivery in November 2005) will require SAP Basis Plug-In 2005.1"
I have an R/3 4.6c with PI 2004.1 and a BW 3.0B with PI_BASIS 2003.1.
Why using a mistake combination I work right?
Are there some restriction using this combination?
Regards
Davide Ivanov
[email protected]

Within SAP R/3 Enterprise, the SAP Basis Plug-In is a prerequisite for the SAP R/3 Plug-In, and both components always have to have the same release level, e.g. PI 2004_1 and PI_Basis 2004_1. When planning an upgrade for the SAP R/3 Plug-In within SAP R/3 Enterprise, you have to upgrade the SAP Basis Plug-In as well. As of SAP Basis Plug-In 2005.1, the releases will no longer need to correspond. However, the SAP R/3 Plug-In Support Package for PI 2004.1, which contains new interfaces, will still require a specific SAP Basis Plug-In. SAP R/3 Plug-In Support Package 10 for SAP R/3 Plug-In 2004.1 requires SAP Basis Plug-In 2005.1. ...
REFERENCE FROM SERVICE.SAP.COM
ASSIGN POINTS IF IT HELPS

Ubuntu 10 (Linux) & Firefox 3.6 ~ How to uninstall the Adobe Flash Player plug-in & ActiveX control

Ubuntu 10.045 (Linux) and Firefox 3.6.3 ~ How to uninstall the Adobe Flash Player plug-in & ActiveX control
In general Adobe needs to offer Ubuntu (Linux) support. I don't use Windows anymore and will go with whatever company provides me the Plug In's I need to function. In this case at the current time, I can't use Adobe flash Player to view You Tube video's. I followed the link that helps a user fix the problem:
Solve a Problem: The video won't play:
http://www.google.com/support/youtube/bin/answer.py?answer=56115
I then saw that you suggested that I first needed to uninstall any older versions of the Flash Player and then install the latest version of the Flash player. I clicked on the link find out how to uninstall it here:
How to uninstall the Adobe Flash Player plug-in and ActiveX control
http://kb2.adobe.com/cps/141/tn_14157.html
They didn't offer any help with Ubuntu 10.045 (Linux). Please offer the instructions and automatic (non-terminal) uninstaller. Also, I want an automatic installer for Ubuntu 10 (Linux) & Firefox 3.6 that is easy like like you have for Windows and like Sun's Java has for Linux.
Message was edited by: u2rcrazy ~ Edited Title

You should go to this site to see what versions of Flash Player and Shockwave Player you have installed.
http://www.adobe.com/shockwave/welcome/
The versions you are listing (10.0 r12, 10.0 r2) appear to be Shockwave Plauer versions, not Flash Player.
If you want to uninstall Flash Player, there should be an uninstaller in the install directory. I do not know where that is on Linux.

When I try to play youtube video I get the message of blocked plug-in, and I can not play video using Safari. (Youtube works fine with google chrome) I tried installing flash player HTML5 etc... but still no difference.

I just installed OSX Mountian Lion, and ever since then I can not play youtube video's. I get the message of 'Blocked Plug-in' in the youtube screen. I have tried installing Adobe Flash Player. HTML 5, also tried enabling/disabling java, but nothing worked out. Is there any way I can play youtbe vieos on Safar. (It works fine with Google Chrmoe, only safari has problem)

If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. Safari > Preferences > Extensions
It can also be installed as a plugin in /Library/Internet-Plug-Ins.
Try uninstalling the currently installled Flash plugin (required for most YouTube content) then reinstall new > Troubleshoot Flash Player | Mac OS
From your Safari menu bar top of your screen click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now from the menu bar click Develop > Empty Caches

Windows 2012 Domain Controller: Failed to open the runspace pool. The Server Manager WinRM plug-in might be corrupted or missing

Hi all,
We have been battling a problem for the last couple of days when we try to add the first windows server 2012 DC to an already existing Domain.
The Server installation goes smoothly and we can add the computer to the domain and its all green.
After we promote the server to a domain controller the WinRM service starts acting up (not responding anymore).
The server manager console shows Remote Management as disabled, and when we try to enable it via the console or Powershell it freezes up.
The AD DS part of the console is saying that there are post-promotion tasks that need to be completed but once we click on the task it takes us to the promotion wizard again, that basically complains that: Failed to open the runspace pool. The Server Manager
WinRM plug-in might be corrupted or missing.
In the Remote Management Event log we see the following entry: "The client got a timeout from the network layer (ERROR_WINHTTP_TIMEOUT)" Event ID 138
We are unable to do anything with the server (demote, add roles, remotely manage...). We tryed the following already:
1. Recreate from scratch
2. Checking the GPOs to see if there is anything setup about RM -> came up with nothing
We just ran out of ideas so HELP PLEASE !
BR
Tomaz Praprotnik

Hi Cicely,
Yes the error from the Windows Remote Management event log contains (I took out the User and FQDN of the Computer):
Log Name: Microsoft-Windows-WinRM/Operational
Source: Microsoft-Windows-WinRM
Date: 3/29/2013 1:38:53 PM
Event ID: 138
Task Category: Response handling
Level: Error
Keywords: Client
User:
Computer:
Description:
The client got a timeout from the network layer (ERROR_WINHTTP_TIMEOUT)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-WinRM" Guid="{A7975C8F-AC13-49F1-87DA-5A984A4AB417}" />
 <EventID>138</EventID>
 <Version>0</Version>
 <Level>2</Level>
 <Task>10</Task>
 <Opcode>0</Opcode>
 <Keywords>0x4000000000000002</Keywords>
 <TimeCreated SystemTime="2013-03-29T12:38:53.786357100Z" />
 <EventRecordID>6876</EventRecordID>
 <Correlation ActivityID="{18FCFBD2-2B38-0003-D261-FD18382BCE01}" />
 <Execution ProcessID="1084" ThreadID="2924" />
 <Channel>Microsoft-Windows-WinRM/Operational</Channel>
 <Computer></Computer>
 <Security UserID="" />
</System>
<EventData>
</EventData>
</Event>
There is also another entry that sometimes comes up:
Log Name: Microsoft-Windows-WinRM/Operational
Source: Microsoft-Windows-WinRM
Date: 3/29/2013 1:36:34 PM
Event ID: 142
Task Category: Response handling
Level: Error
Keywords: Client
User:
Computer:
Description:
WSMan operation Invoke failed, error code 2150859046
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-WinRM" Guid="{A7975C8F-AC13-49F1-87DA-5A984A4AB417}" />
 <EventID>142</EventID>
 <Version>0</Version>
 <Level>2</Level>
 <Task>10</Task>
 <Opcode>2</Opcode>
 <Keywords>0x4000000000000002</Keywords>
 <TimeCreated SystemTime="2013-03-29T12:36:34.076973400Z" />
 <EventRecordID>6869</EventRecordID>
 <Correlation ActivityID="{18FCFBD2-2B38-0001-F328-FD18382BCE01}" />
 <Execution ProcessID="4888" ThreadID="4392" />
 <Channel>Microsoft-Windows-WinRM/Operational</Channel>
 <Computer></Computer>
 <Security UserID="" />
</System>
<EventData>
 <Data Name="operationName">Invoke</Data>
 <Data Name="errorCode">2150859046</Data>
</EventData>
</Event>
Best regards
Tomaz Praprotnik

ERP ECC 6.0 Cluster Installation under MS SQL Server 2005

Hi,
anybody in the world did a ECC 6.0 Cluster installation under MS SQL Server 2005 database?
Can anyone please share some usefull documents to understand... This is new to me and doing it for first time.
Pls help
RGC

Hi,
I'm looking for a customized document for ECC installation (how to document) and not a SAP Standard one as i'm new to cluster. Please share if any.
How to configure the nodes in three tier architecture?
In which node the DB should be installed?
In which node the CI should be installed?
How to configure Central Point of Failure (CPOF)?
How the ECC 6.0 cluster works and how to distribute the resources (SAP) across nodes?
What are the resources that needed for failover from one node to another?
Expecting help.
rgds
RGC

I get the message "adobe flash plug in has crashed" when I try to play a sample file from audible.co.uk

I am running windows vista for business (32 bit), using firefox, when I try to play a sample from audible.co.uk the browser hangs and then I get the message, "adobe flash plug in has crashed". I have tried uninstalling the flash player and reinstalling to no avail. It also crashes using Internet Explorer and Google Chrome.

If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. Safari > Preferences > Extensions
It can also be installed as a plugin in /Library/Internet-Plug-Ins.
Try uninstalling the currently installled Flash plugin (required for most YouTube content) then reinstall new > Troubleshoot Flash Player | Mac OS
From your Safari menu bar top of your screen click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now from the menu bar click Develop > Empty Caches

Where are _correct_ directions for installing the Adobe Flash Reader plug-in

There are directions for installing Adobe Flash Player in its new Firefox incarnation as a plug-in rather than its old incarnation as a stand-alone program. Unfortunately, the directions are not for the current versions of either Firefox or Adobe Flash Player, and not only don't work, but don't even make sense. Are there _correct_ directions somewhere that will let a reasonably naive user install this plugin? Following the existing directions get conformation at ever step that the installation has succeeded, but in the case, nothing is there to run. As a result, that huge fraction of the web using Adobe Flash Player is now broken for me.
== This happened ==
Every time Firefox opened
== Firefox changed Adobe Flash Player to be used as a plug-in.

There is no stand-alone Adobe Flash; never has been that I recall. The following will install the plugin.
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. N/A; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-''In Windows,'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-''In Windows,'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Shockwave for Director (aka Shockwave Player)''': your ver. ~~red:10.1 (very old)~~; current ver. 11.5.7.609 (important security update released 2010-05-11; see http://www.adobe.com/support/security/bulletins/apsb10-12.html)
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''
'''Install/Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. ~~red:8.2.3 (very old)~~; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Start > Program Files, find and click Adobe Reader to open, click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, '''but''' do look at the two bulleted items at the bottom "'''NOTE for IE:'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

USB/Serial Drivers and App Builder Installer Questions...are drivers included in the Installer with the LV runtime engine?

Hello all,
I'm wondering if someone can help me out with how drivers and all are treated with applications distributed with App Builder, used to create a stand alone, full install of app and labview engine with Installer.
What has happened is, my application was created using the NI branded USB to RS232...and USB to RS485, and they work great.
On the application when running..you fire it up, it finds the USB to serial device, and I have a dropdown that finds the available COM ports to use (along with setting parity, etc).
I've installed on different computers (without previous labview installs) with the installer. They all worked.
The customer has received the installer....and despite us telling them to use the NI branded USB/Serial interfaces..they are trying to work with a different USB/serial cable.
They say the COM ports aren't even showing up when they run the installed application.
So, I'm not sure where to start. Is this a driver issue? Does the App Builder Installer...install the drivers for the interfaces I was using with it? Is there a way for the person to find and install a driver on their own...or would I have to somehow find out a driver for what they use....then, basically redo the App Builder Installer build...to include that driver with the executable I send back out?
I guess I basically need a better understanding of how drivers for external access/communications are handled when you use App Builder to create a stand alone application complete with the labview runtime engine...and nothing else.
Thank you in advance,
cayenne

The main thing is that LV uses VISA to talk to serial port whether native on the machine or from USB dongles that you plug into the computer. It sounds to me like their dongles aren't working.
Can the customer see the ports in the Windows Device Manager? Can they access them through something like hyperterminal? How does your program find the USB/Serial devices?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Error during installation of Microsoft SQL Server 2005

Hello All,
During installation of Microsoft SQL Server 2005 I have got the below error message
"There was an unexpected failure during the setup wizard"
From this link http://support.microsoft.com/kb/916760 i came to know that this error occurs just because I used SQL Server 2005 installations from a folder on a network share.
After that i unstall everything & copy the installations in a local drive. But again when we restart the activity we got the same error message & the installation completed.
Any hint why this happens..
Thank You.
Kind Regards,
Jituda

Hello Jituda,
I think we need to focus on the error in the setup log first.
Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run:
Source File Name: datastore\cachedpropertycollection.cpp
you might be able to see more detailed error information in the log.
You may check if the following links help:
http://www.sqlserverfaq.net/2008/12/17/sql-server-2005-setup-failing-to-install-on-cluster-with-unexpected-failure-while-performing-the-scc-checks/
http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/f998b073-4378-4d02-95ac-c9afb31c7a60
In addition, to clarify, the SQL4SAP.VBS script does not support Microsoft Cluster Service (MSCS). If you want to run the
script in an MSCS configuration, you get an error message. In MSCS configuration need to install the SQL Server database software manually instead of using the script. Please see the corresponding SAP product installation guide under http://service.sap.com/instguides
Kind regards,
Qingqing Wang

Trying to install the print studio pro plug in into Lightroom 3

When I look into the program files there is only a .lrdevplugin plug in and it is not the one I need to give me acess. How do I get it? Thanks I know the route in, just dont have the right plug in.

I'm having the same issue as the original poster. The latest version of PSP does not seem to be installing properly thus we cannot access it through the menu. Normally after installation it shows up in the list you show in the screen shot, but it's not showing up after downloading and installing the latest version. There should be a folder ending with .lrplugin in the PSP installation directory but there isn't one. Instead there is a folder named CNPSPPILR.lrdevplugin. I tried using Lightroom's plugin manager to manually add it to Lightroom and at first this seemed to work as it said the plugin was installed and running. And then PSP would appear in the list you show in your screenshot. However if I tried starting the plugin, I get a popup saying Windows cannot find CNPSOPN.exe. Edit: Also if I attempt to use the Print Studio Pro Plug-In Install in the Canon Utilities folder in the Start Menu, it says that a compatible version of Photoshop or Lightroom is not installed. I'm using the current edition of Lightroom (2015.1.1).

How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

OK. The 6.0 version no longer has a printer configuration that I could find. You might try Printer Sharing in the Sharing preferences.
I would also check the printer's user manual for help with the setup, and that failing check the manufacturer's website and/or tech support.

Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6

Hello
Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6.
I have a problem since my installation of the Yosemite update on my Mac I can more open Indesign yet I have installed JavaForOSX2014-001 but it has changed nothing someone could help me?

Please do not post the same question multiple times. If someone can help you, they will, but you need to be patient -- we're all just volunteers, users like yourself. I'm going to delete your other posts.

I have given up on my dell and bought an iMac 27"... Now how do I transfer my dell iTunes playlists from my dell to my iMac, as they are showing on the iMac when I plug in my iPod but it's not allowing to me to play them as they are shaded?

I have given up on my dell and bought an iMac 27"... Now how do I transfer my dell iTunes playlists from my dell to my iMac, as they are showing on the iMac when I plug in my iPod but it's not allowing to me to play them as they are shaded? I have also separately transferred all my music via my external drive from my dell to my iMac which is showing in iTunes but won't upload to my iPod... Just to confuse you even more my AppleTV which is linked to my log in email address and home sharing is showing and playing all the playlists I want to see on my iMac... Phew that was exhausting hope you understand and can help me:-)

You may have transferred all your songs, but your iPad is seeing the library as a different entity.
The following article(s) may help you.
Moving your iTunes library to a new computer

My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or an airport power source. My iphone and ipad charge fine on the same cable usin ghte same wall plug in the same wall socket?

My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or directly into an airport power source. My iphone and ipad charge fine on the same cable using the same wall plug in the same wall socket. This makes no sense but I see that it has been posted as a problem elsewhere. This must be due to some kind of degredation of the Ipod. . It is not fixed by IOS resets as others have noted.
Has anyone asked Apple directly about this?

Hi there Apples or Pears,
I would recommend taking a look at the troubleshooting steps found in the articles below.
Charging your iPod battery
http://support.apple.com/kb/ht1384
iPod's battery doesn't charge
http://support.apple.com/kb/ta44551
-Griff W.

Installation of the ST-PI 2005 plug-in

Similar Messages

Maybe you are looking for