Installation of translationhub in oracle 10g

hi i am completely stuck,i want to know how to install translation hub in oracle 10g.i feel lost after searching google and oracle.pls help

hi i am completely stuck,i want to know how to
install translation hub in oracle 10g.i feel lost
after searching google and oracle.pls helpWhat problem are you having with Translation Hub?
Which version of iDS do you have?
The most common problem is with incompatible Database Character Set or incompatible Oracle Version. For instance, using 9iDS, I can only install Translation Hub on 8.1.6, 8.1.7 or 9.0.1. So, I was unable to install on 10.2.0.1. Also your Database Character set need to be compatible with that supported by Translation Hub.

Similar Messages

Netweaver 2004s installation problem on Windows: Oracle 10G

Hi Friends,
I would like to install Netweaver 2004S(with usage types AS ABAP, AS JAVA, BI, BI JAVA, EP & DI) on a server which has Windows 2003 server OS running on it.
The server has 6GB RAM and has 5GB of free space on C: and a free sapce of 60GB on H: & 50GB on I: respectively.The database that is to be used is Oracle 10g.
Do I need to install first SAP solution manger 4.0 on this or Can i proceed with Netweaver 2004 S installation???
I am installing a central system.
First I tried installing SAP solution manger 4.0 on this system and it went successfully. Now when i am installing Netweaver 2004s on the same machine, during installation I am asked whether to "install a MCOD or create a new database for this installation".
I chose Install MCOD and proceeded further with Installation. But my installation is taking a lot of time while executing the service :"Creating database schema". The message which i get on status bar is " Removing schema user SAPSR3" and the status remains the same.
Have any of you faced this problem ? Please let me know how you have proceeded further.
Before starting the installation one of the prerequisites " SWAP SPACE VALUES" for installation was not satisfied by my system and even then i proceeded with the installation.
Is it because of this SWAP space problem , my intsallation is strcuk?? or what could be the reason fo this?
Thanks
Diwakar

Hello Diwakar,
If you are just installing NW2004s then it is not mandatory to install Solution manager.
To increase the swap space --
Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change
you canIncrease swap space/page file here.
Do not install the system as MCOD, make the seperate database.
Do revert for further doubt.
Best Regards,
Sachin.

SAP 4.6C Installation in Cluster error - Oracle 10g HPUX 11.23

Hi all,
We are installing 4.6C in oracle 10g/hpux 11.23 in a cluster environment in primary node.
During the last phase of installation, I get the below error.
INFO 2008-05-05 10:53:02
    Starting up the SAP System
INFO 2008-05-05 10:53:02 DBR3START_IND_ORA SyCoprocessCreateAsUser:300
    Creating coprocess /bin/sh /home/r3padm/startsap_dbciR3Pd_00 as
    user r3padm and group sapsys ...
INFO 2008-05-05 10:53:02 DBR3START_IND_ORA SyGroupIDGet:100
    Group id for group sapsys is 201.
INFO 2008-05-05 10:53:02 DBR3START_IND_ORA SyUserIDGet:300
    User id for user r3padm is 7029.
INFO 2008-05-05 10:53:02 DBR3START_IND_ORA ExecuteDo:0
    RC code form SyCoprocessWait = 127 .
ERROR 2008-05-05 10:53:02 DBR3START_IND_ORA ExecuteCheck:0
    Exit code from /bin/sh: 127.
ERROR 2008-05-05 10:53:02 DBR3START_IND_ORA InternalInstallationDo:0
    Phase failed.
ERROR 2008-05-05 10:53:02 DBR3START_IND_ORA InstallationDo:0
    Phase failed.
ERROR 2008-05-05 10:53:02 InstController Action:0
    Step DBR3START_IND_ORA could not be performed.
ERROR 2008-05-05 10:53:03 Main
    Installation failed.
ERROR 2008-05-05 10:53:03 Main
    Installation aborted.
But I am able to start SAP manually using startsap and its successfull.
Can someone help me, what the above error is?
Thanks & Regards
Senthil

Markus,
I read the note, and also I have installaed 4.6C/oracle 10g/hpux11.23 for more than 4 servers and it was successfull.
But this time I am installing in a cluster environment. So I am facing this issue. When I checked in the install directory with ls -lrt the last file isdatabase.log
INFO 2008-05-06 16:02:43 RFCRSWBOINI_IND_IND CRfcOpen:0
    RfcOpen() was successful.
INFO 2008-05-06 16:02:44 RFCRSWBOINI_IND_IND CRfcPing:0
    Pinging of RFC destination was successful.
INFO 2008-05-06 16:02:45 RFCRSWBOINI_IND_IND GetSaprelease:0
    46C
INFO 2008-05-06 16:02:46 RFCRSWBOINI_IND_IND ReadInstvers:0
    INSTVERS loaded successfully.
INFO 2008-05-06 16:02:48 RFCRSWBOINI_IND_IND ReadInstvers:0
    INSTVERS loaded successfully.
INFO 2008-05-06 16:02:49 RFCRSWBOINI_IND_IND DeleteRow:0
    Deleted: 1 rows
INFO 2008-05-06 16:02:50 RFCRSWBOINI_IND_IND ReadInstvers:0
    INSTVERS loaded successfully.
INFO 2008-05-06 16:02:50 RFCRSWBOINI_IND_IND CleanupSAPEntries:0
    Deletion of 0 SAP rows
INFO 2008-05-06 16:02:52 RFCRSWBOINI_IND_IND ReadInstvers:0
    INSTVERS loaded successfully.
ERROR 2008-05-06 16:02:53 RFCRSWBOINI_IND_IND StartJob:0
    Job RSWBOINS_JOB could not be started.
ERROR 2008-05-06 16:02:53 RFCRSWBOINI_IND_IND InstallationDo:0
    Phase failed.
ERROR 2008-05-06 16:02:53 InstController Action:0
    Step RFCRSWBOINI_IND_IND could not be performed.
ERROR 2008-05-06 16:02:53 Main
    Installation failed.
ERROR 2008-05-06 16:02:53 Main
    Installation aborted.
dcecpn0:root >
Also when I logged into the SAP and I can see some error messages in sm21
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
18:18:23 DIA 02 000 SAPSYS            BY4 Database error 2289 at INS access to table DDLOG
18:18:23 DIA 02 000 SAPSYS            BY0 > ORA-02289: sequence does not exist#
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
18:18:23 MS                           Q0U Client dbciR3Pd_R3P_00 is not known to the message server
Its like I am able to display SCC4, when I change to change mode, I get the below error message
"System error: Unable to lock table/view T000"
Can you help
Thanks
Senthil

Installation Solution Manager on Oracle 10g / AIX 6.1 - Oracle Patches

Hi guys,
I have a question.
I'm on a project to install ERP 6.0 and I will start installing Solution Manager 7.0 EHP1, through no fault, the project is long overdue and urgently need the Solution Manager for the team project starts.
The SAP platform is AIX 6.1 / Oracle 10.2.0.4. When I'm installing the central instance of Solution Manager, where the process to install Oracle Database Software Installation, then Current Patch Set (10.2.0.4) and lastly Required Interim Patches, which would be the point 4.7.4 of the Installation Guide SAP Solution Manager 7.0 including SAP Enhancement Package 1 on AIX - Oracle, can jump this last step (Required Interim Patches) and install these patches later ????? O is mandatory to install the Interim Patches to continue installing of SM.
Thanks a lot.
Desiré

Hello Desirée
If you take a look at the note, Oracle/SAP have change the patches policy.
Currently there is only ONE "patch" to be installed.
It is called a SAP patch Bundle (or something like that)
It contains the latest PSU, and all required SAP individual patches.
It must be installed with Mopatch.
it has been released the 10th of this month.
This can facilitate the task of installing patches (only one to "take care off"

Install Oracle 10g with Toad 9.1

Hi All,
I am a novice in database(SQL,PLSQL) programming and hence want to learn and practise very deeply in detail for which i want to install Oracle 10g client with Toad 9.1.So need your advise on the process.
(a)Do i need to download entire Oracle Enterprise Edition Installation for Vista? I have read in one of the forums that downloading only the Oracle Client is enough?
Can you please advise me?
(b)I already have the TOAD 9.1 setup with me which i can install.But,i do not know that how will i use TOAD interface and connect to the oracle database.
(c)Also,any sample script/database with some tables that i can use for learning complex SQL query writing would be very helpful.In brief-any project that i can work on in building all the requirements by writing SQL which simulates real time scenarios of SQL development.
Please help me ,i am struggling.
Thanks
Dev

Hi all,
Thanks a lot for all your inputs.Its very useful and presently I am following the steps suggested.
I had another doubt with respect to this.While attending a oracle course,the instructor had told about an installation option of installing oracle 10g on Linux using VMware/virtual -i am sorry i am not sure about it.
So,can you please give your inputs about this process as I dont know about how to setup?
(a)What are the tools that i will need to build a virtual machine in my present computer with Linux as the OS?
And,what are the steps we need to do ?
(b)How do i use a vitual machine if i install it? I mean how will it work?
(c)Then,at last how do i install Oracle with Linux on that?
Please help me with some more inputs
--Dev

Oracle 10g Express on Fedora 14 64-bit howto

I wanted to test Oracle 10g XE using VMware and Fedora 14 and found the installation instructions form Oracle somewhat outdated and confusing. http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm. Here are my installation notes - perhaps someone will find them helpful.
h3. Installation of Fedora and Oracle 10g XE:
h4. 1) Install Fedora 14 Desktop 64-bit form the Live DVD using the defaults.
Note: To open a terminal window, select Terminal from Applications/System Tools menu.
h4. 2) Edit /etc/selinux/config to disable SELinux:
# su - root
# vi /etc/selinux/config
SELINUX=disabled
h4. 3) Install required software including 32-bit libraries:
$ su - root
# yum install install bc libc.so.6 libaio.so.1 gcc libaio compat-libstdc++-33
h4. 4) Download and install Oracle 10g XE:
http://technet.oracle.com
$ su - root
# cd /home/<your_usename>/Downloads
# yum install --nogpgcheck oracle-xe-univ-10.2.0.1-1.0.i386.rpm
h4. 5) Configure Oracle 10g XE:
# /etc/init.d/oracle-xe configure
h4. 6) Configure your regular fedora user account:
$ su - root
# /usr/sbin/groupadd -r dba
# usermod -G dba <your username>
# su - <your username>
$ echo "source /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh" >> $HOME/.bashrc
Logout for the change to take affect!
To access the Database Home Page go to "http://127.0.0.1:8080/apex
h3. Remote Access:
h4. 1) Enable remote ssh login:
$ su - root
# service sshd start
# chkconfig --level 345 sshd on
h4. 2) Configure Network Firewall from System/Administration menu:
Other Ports
Add
User defined
Do this for ports 8080 and 1521
Apply
h3. VMWare Tools installation:
+Note: configure your guest OS for Bridged Networking and fixed IP+
$ su - root
# yum install gcc make kernel-devel perl
At your VMware guest menu, select "install VMware Tools"
Right click on VMwareTools-xxx.tar.gz and extract it to the Desktop
Open a terminal window and type the following:
$ su - root
# cd /home/<your_username>/Desktop/vmware-tools-distrib
# ./vmware-install.pl
Continue to press Return and accept defaults.
# reboot
h3. Troubleshooting:
h4. ssh port 22: Connection refused
The Network Firewall is enabled by default, but port 22 is open.
You may try to simply disable/apply and enable/apply and try again - strange, but worked for me.
( +service iptables restart+ did not resolve this)
h4. Check if the ssh daemon is running:
# lsof -i tcp:22
h4. Use sqlplus to reset your passwords:
Make sure you properly configured your regular fedora user account as outlined above:
$ sqlplus / as sysdba
SQL> alter user sys identified by "password" account unlock;
SQL> alter user system identified by "password" account unlock;
h4. Start and stop Oracle XE:
# su - root
# /etc/init.d/oracle-xe start
# /etc/init.d/oracle-xe stop
h3. Related Links:
https://fedorahosted.org/spacewalk/wiki/OracleXeSetup

I got Oracle 11gR2 running on 64-bit Fedora 14 x86_64 - you do need a mix of x64_86 and i686 (32-bit) packages as given here:
http://download.oracle.com/docs/cd/B28359_01/install.111/b32285/toc.htm
These aren't exact matches on version numbers so when runInstaller doesn't pass validation, just check "Ignore". This will fail during linking, so follow along below and the rest will go smoothly:
installation error in invoking target 'agent nmhs'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Hi.
So you want to build for fedora 13 without getting the error...
When you start to install with ./runInstaller, run in another terminal window (as root)
ls $ORACLE_HOME/sysman/lib/ins_emagent.mk
At first this will produce an error, as the installer wont have created this file yet.
Once the file exists, do:
vi $ORACLE_HOME/sysman/lib/ins_emagent.mk
Search for the line
$(MK_EMAGENT_NMECTL)
Change it to:
$(MK_EMAGENT_NMECTL) -lnnz11
If you do it within 30-40 seconds of the file appearing, you should not get any errors and the build will go fine. If you get an error, finish your edit then click on retry.
Hope that helps.
Gordon.
Edited by: [email protected] on 07-Jul-2010 06:54
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Problem Oracle 10g database Installation on Windows 2003 Server

Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

Oracle 10g Installation Problem on SUSE Linux 10

Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root    0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sda10             2104376     73112   2031264   4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7   dba          128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. Shroff

Hi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM

OracleAS 10g Installation Problem on RedHat AS 3.0

Hi
I need to install OracleAS 10g on RedHat AS 3.0 and it seems that I need a patch (Patch 3006854) and the installation is impossible without it.I just started using oracleAS 10g and I dont have any metalink id.
I think something is wrong here.
a free trial version with a commercial patch !!!
can any one please help me out.
regards yashar

dear fredrik
I tried to install it according to the installation guid on http://www.oracle-base.com/articles/10g/OracleAS10gInstallationOnRedHatAS3.php as you see it asked for installation of a patch.
and yes I tried to install it without installing this patch and I got an error saying that I am missing a file named ld.so in /etc.I thought it might be connected to that patch.
beside when I was looking for the solution to my problem I saw many people having the same problem and asking the exact same question.
please notify about any solution that you think might help me solving this problem. I am in a hurry
regards yashar

Oracle 10g RAC installation on HP-UX 11.31 for SAP ERP 6.04

Dear experts,
We are trying to install SAP ERP 6.0 EHP4 with Oracle 10g RAC on HP-UX 11.31. Please note that, We are using VERITAS cluster filesystem (CFS) for this purpose and not HP-UX ServiceGuard ClusterFileSystem.
*As per SAP procedure, we have installaed plain plain SAP system with single instance Oracle (ref: Configuration of SAP NetWeaver for Oracle Database 10gRAC guide). Now we are first trying to install Oracle Clusterware (CRS) and then we will install Oracle RAC software. Is this procedure right?*
Which file (and its path) we have to use for CRS installation and its patch? Is it runInstaller under /oracle/stage/102_64/clusterware? With this file we can install CRS 10.2.0.1. Similarly for Oracle RAC, which files we are supposed to use, i.e for installation and patch upgrade?
Also can we use clusterware package available from Oracle directly in the SAP environment?
We tried to install CRS with runInstaller while running Configuration Assistant after root.sh script.
The following commands are failing in Configuration Assistant:
/oracle/CRS/102_64/bin/racgons add_config erpprdd1:4948 erpprdd2:4948
/oracle/CRS/102_64/bin/oifcfg setif -global lan1/20.20.20.0:cluster_interconnect lan0/192.168.3.0:public
/oracle/CRS/102_64/bin/cluvfy stage -post crsinst -n erpprdd1,erpprdd2
1st command does not give any output if run manually.
2nd commands o/p: PRIF-12: failed to initialize cluster support services
3rd commands fails in every check
Please suggest the solution and expecting answers to the above mentioned questions.
Thanks & Regards,
Tejas

>
Charles Yu wrote:
> Q1: Oracle RAC with 9.2.x on HP-UX?
> A: For HA environment, cluster software is: MC/SG on HP-UX 11.31; there are optional components of MC/SG for supporting Oracle RAC and SAP application. I was confused that I could not find the installation guide regarding 4.6C on MC/SG HA environment of HP-UX.
> Charles
Relevant docs for Service Guard (SG) cluster are available at http://docs.hp.com. Hope you have checked for the suport of oracle 92x on HP-UX 11.31
>
Charles Yu wrote:
> Q2: Any reason why you don't use a supported database version?
> A: Actually, in order to avoiding the the risk of database upgrade and minimizing the migration risk, top level has decided that keeping the same Oracle version. Indeed, we don't plan the migration of application. On the other hand, it is complicated to do the assessment for application migration.
> Charles
You can go for combined os migration and db release upgrade also at a stretch with the same downtime.

Oracle 10G installation problem, and errors on SOLARIS 10 x86

HI.
I installed the last version of oracle 10g on a x86 SOLARIS 10 system.
When the installer arrived at Configuration assistants, the window is stopping, and I can't see forward. But when I look at the installAction.log, the installation is checked as OK (?).
When I launch sqlplus, and startup inside, it is said the ora-00205 error (problem with control files), and in the end, I'm really suprised there's no the database I told the installer to create at the beginning. But should I be surprised? As I didn't see really the end of the installation, and the installer didn't propose me the PATH where to install the DB, well, I guess there's something wrong.
Could anybody tell me how to solve these problems, please?
Thank you :)

Two options:
1. Create database using DBCA - execute $ORACLE_HOME/bin/dbca
2. Create database manually (without DBCA)

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Error while Oracle 10g Installation suse linux

Hi,
All i am facing issue while installing Oracle 10g release 2 on open suse.
All test are getting passed but getting a error reltated to ip address as follows.
INFO: Checking DetectIfDHCPAssignedIP
This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
INFO: Detecting the IP.....:10.31.215.64
INFO: Checking the network interface display name.... :eth0
INFO: Checking the network reference name..... :eth0
INFO: Checking the platform .......46
INFO: Checking the LINUX vendor .... :SuSE
INFO: Check complete. The overall result of this check is: Not executed <<<<
Also while installing getting error as,
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public
IP addresses. However, the primary network interface on the system should be
configured with a static IP address in order for the Oracle Software to function
properly. See the Installation Guide for more details on installing the software
on systems configured with DHCP.
Please help me to resolve issue.
BR,
Rajesh
Edited by: Rajesh.Rathod on Dec 20, 2010 12:52 AM

Hi,
I tried to follow each step of oracle documentation but network configuration requirement is failing.
please find following log.
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9
Actual Result: SuSE-9
Check complete. The overall result of this check is: Passed
=======================================================================
Checking operating system package requirements ...
Checking for make-3.79; found make-3.81-128.14.     Passed
Checking for binutils-2.14; found binutils-2.19.51-10.26.4.     Passed
Checking for gcc-3.2; found gcc-4.4-4.2.     Passed
Checking for libaio-0.3.96; found libaio-0.3.104-144.2.     Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking kernel parameters
Checking for semmsl=250; found semmsl=1250.     Passed
Checking for semmns=32000; found semmns=32000.     Passed
Checking for semopm=100; found semopm=100.     Passed
Checking for semmni=128; found semmni=256.     Passed
Checking for shmmax=536870912; found shmmax=3294967296.     Passed
Checking for shmmni=4096; found shmmni=4096.     Passed
Checking for shmall=2097152; found shmall=2097152.     Passed
Checking for file-max=65536; found file-max=131072.     Passed
Checking for VERSION=2.6.5-7.201; found VERSION=2.6.31.5-0.1-desktop.     Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000.     Passed
Checking for rmem_default=262144; found rmem_default=4194304.     Passed
Checking for rmem_max=262144; found rmem_max=4194304.     Passed
Checking for wmem_default=262144; found wmem_default=262144.     Passed
Checking for wmem_max=262144; found wmem_max=262144.     Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Recommended glibc version
Expected result: ATLEAST=2.3.3-98.28
Actual Result: 2.10.1-10.4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 5460MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking available swap space requirements ...
Expected result: 5460MB
Actual Result: 10244MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Please suggest how to resolve.

Oracle 10g rac installation on IBM power server

Dear Gurus,
I am installing Oracle 10g RAC on IBM power server but while running CRS getting the following errors. Please help to resolve this issue.
OUTPUT from Installation log:
INFO: Start output from spawned process:
INFO: INFO:
INFO: /oracle/app/oracle/product/crs/bin/genclntsh
INFO: /usr/bin/ld: cannot find -lxl
INFO: collect2: ld returned 1 exit status
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: make:
INFO: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/oracle/app/oracle/product/crs/network/lib/ins_net_client.mk'. See '/oracle/app/oracle/oraInventory/logs/installActions2011-12-26_04-40-48PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
SYSTEM:
IBM power server
Linux 5.3
I have already tried changing ORACLE_HOME,CRS_HOME,LD_LIBRARY_PATH but nothing worked.
Regards,
Prajash

Those errors remind me on errors I encountered when I was trying to do installation that was not certified,
so try to check if installation you are doing is actually supported.
In the meantime , visit metalink and read document [ID 460969.1] , */usr/bin/ld: Cannot Find -lxml10, Genclntsh: Failed To Link Libclntsh.so.10.1*

Oracle 10g R2 installation with ASM+RAC

Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.

Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm

Installation of translationhub in oracle 10g

Similar Messages

Maybe you are looking for