Installation of TREX 7.0 on 64bit windows then SAP does not start

I have implemented EP7 Portal (NW04s SP11) on a MS-SQL DB with windows 2003 64bit hardware. I also want to install TREX which is version 7.0 on the same server.
After installing TREX the http_server would not start. I followed OSS note 1008299 that instructed me to set IIS to run in 32 bit mode as TREX 7.0 really isn't a 64 bit application!!
I performed this but now the service for my SAP Java instance will not start:
error : "The dynamic link library librfc32.dll could not be loaded" (SCS does start OK)
Its obviously got something to do what I've just performed...
any help anybody?
thanks
SB.

Hi Simon,
Actually trex was not released for a 64 bit component. But in the installation CD, it was printed mistakenly.
For that only, SAP has given note 1008299 to run IIS in 32 bit mode instead of 64 bit mode, because although you have done the installation as a 64 bit machine, its for 32 bit platform only.
Running the script will start your IIS on a 32 bit mode and also, change your executables, file folder as well.
Previously, i also had the same problem and once i did as per the note, its working perfectly now.
Thanks and Regards,
Sailesh K

Similar Messages

Windows Service (SMB) does not start automatically

I have a client with an Xserve G5 running 10.4.8 with all software updates applied. Recently, the client decided to buy a new Ricoh multi-function printer, copier, fax machine. We've configured a share point on the server that the Ricoh uses to deposit the incoming faxes and scans. It works fine, but the downside is that it only works over SMB or FTP. I went with SMB (Windows Sharing) because of Apple's flakey implementation of FTP over the years.
The problem is that when the server gets rebooted -- due to power outtage, software update, whatever -- the Windows sharing does not turn itself on like all of the services do. I have to go into Server Admin and turn on Windows sharing manually.
Is there any way to get the Windows Sharing to turn on automatically at boot up like all of the other services do?

I had the exact same problem after applying the 10.4.8 combo update. This thread solved my problem:
http://discussions.apple.com/thread.jspa?messageID=2962778&#2962778
In short, I had to disable the "Workgroup Master Browser" setting in Server Admin > Windows Service > Settings > Advanced. This is enabled by default, by the way.

Windows listener +service does not start automatically eventhough Automatic

Hi
When I restart the database server, the listener is not starting automatically , so as the service.
Both are set to start automatically.
This was working before and all of a sudden, this problem appeared.
I dont remember changing any setting on the database side but on windows server side, not sure if anything is changed.
The error we received:
============
The OracleServiceGEOOAP service failed to start due to the following error: %%1053 Service error on GEPGPO01-V
The OracleOraDb11g_home1TNSListener service failed to start due to the following error: %%1053 Service error on GEPGPO01-V
alert log
=======
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 11-MAR-2011 15:44:26
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
listener.log
========
Fri Mar 11 15:44:23 2011
11-MAR-2011 15:44:23 * service_update * geop * 0
11-MAR-2011 15:44:29 * service_died * geooap * 12547
TNS-12547: TNS:lost contact
11-MAR-2011 15:44:30 * service_died * geop * 12547
TNS-12547: TNS:lost contact
Fri Mar 11 15:44:37 2011
11-MAR-2011 15:44:37 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65288)) * establish * GEOOAP * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
11-MAR-2011 15:44:41 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65289)) * establish * GEOOAP * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
11-MAR-2011 15:44:43 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65290)) * establish * GEOOAP * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
Fri Mar 11 15:53:46 2011
So now we have to manually restart the listener and service , for the database to be opened. Is it possible to give direction what areas need to check, to solve this issue?
Thanks.

Hi Krithi,
Can you confirm my understanding here:
* Since a short time the automatic startup of the listener and Oracle instance fail.
* You can manually startup the listener and database instance without any problem, and then all runs as expected
so far so good?
What's your procedure to start the listener and DB instances?
Are you performing the startups with your own user account, or SYSTEM, or a dedicated Oracle account?
Are the windows services running under SYSTEM, a dedicated Oracle user....??
Could it be that the system administrator installed something (like a new Oracle client) which would have changed some settings?
Can you compare the environment variables (ORACLE_HOME, ORACLE_SID, PATH) between the account YOU use for manual startup and those for the user account used to (auto)start the services?
Maybe you can try to plan a reboot after you have set the problematic services to run under your profile?
Well.... a few points to investigate if not yet considered.
HTH,
Thierry

My Windows XP bootcamp does not start anymore

Hi and Happy New Year to @ll,
I think my bootcamp Windows XP partition didn't like the last Power cut.
As I intended to boot from it, the cursor stays on the Windows XP icon then blocks.
I can see the disk and its content from the finder ; I think the MBR is damaged.
Is there a way to repare it?
Thanks to @ll
Claudio

The easiest way was to insert the bootable Wondows XP setup into the CD-ROM reader, then reboot the iMac with ALT-key pressed down, then choose the Windows CD-ROM icon which appeared in the Bootcamp deices choice.
Afterwhile, Windows XP setup program propose to type R to repair a Windows XP installation ; then it requires to type 1 (of the alpha keyboard) + enter to choose the C: drive to repair.
Then type "exit" and enter and the systeme reboots on the repaired drive.
I guess that the MBR was out of order and that the repairing process consisted in copy the MBR backup to the initial MBR.
That's it

Windows Zero Configuration does not start automatically

It won't start automatically, even though I have set it to automatic in the Services Tab. Every time the computer goes to sleep, logs out or restarts, I have to go back into Services and restart it. How can I get it to start automatically. NOTE: I HAVE CHANGED THE STARTUP TYPE IN THE SERVICES TAB BUT IT IS TO NO AVAIL (I have asked this question in other places, and they still give me this answer, so I hope you guys are smart enough to not tell me what I already said I did.)

On the recovery tab of the service properties, set them all to restart. Does that work for you? If you can not start a service, there might be some kind of malware or virus that is forcing the service to start. Could also be a corrupted file on the hard drive. If you look at your event logs, does it show what any error messages?

Applet does not start after JRE 1.5 installation

Hi,
When I go to my webpage where I have an applet that requires Java 1.5..the browsers are prompting for Java installation (ActiveX component install on IE or Firefox plugin for JRE installation). But once the Java install completes the applet does not start automatically. The same code used to work nicely with Java 1.4. The applet used to automatically start and run once the JRE install completed. But with JRE 1.5 it does not start. If I do a refresh on the browser it again prompts for java installation. If I open new browser window and go to the URL the applet starts. Please let me know how to get the applet to start automatically after JRE 1.5 installation.
Thanks,
Vijay

We figured out the problem. the CLASSID was not the right one. Once we changed it...its working fine.
Vijay

Applet does not start after Java 1.5 installation

Hi,
When I go to my webpage where I have an applet that requires Java 1.5..the browsers are prompting for Java installation (ActiveX component install on IE or Firefox plugin for JRE installation). But once the Java install completes the applet does not start automatically. The same code used to work nicely with Java 1.4. The applet used to automatically start and run once the JRE install completed. But with JRE 1.5 it does not start. If I do a refresh on the browser it again prompts for java installation. If open new browser window and go to the URL the applet starts. Please let me know how to get the applet to start automatically after JRE 1.5 installation.
Thanks,
Vijay

We figured out the problem. the CLASSID was not the right one. Once we changed it...its working fine.
Vijay

HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

Could be a lot of reasons. First try to print a supplies status page- If that prints with color on it, you have a driver problem.

Photoshop 32bits does not start up anymore on Windows 7 64bits.

This is the situation:
We have 2 PCs that have been configured identically, with the exception of a scanner (canonScan 9950F) attached to the computer and the 32 bits twain scanner driver installed.
Both PCs worked correctly, the one with the scanner attached started 32 bit PhotoShop when there was need to scan. But for some obscure reason, 32 bits Photoshop does not work anymore. I have tried disabling the twain driver (by moving it out of the plugins directory), restarting the machine, updating to the latest software, but despite this, Photoshop does not start anymore... no beep, no crash, no nothing.
I deinstalled Photoshop, Reinstalled - same phenomena.
At least the Event Viewer of Windows has something to tell, even if it is not quite understandable to me:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2011-07-04T15:39:45.000000000Z
EventRecordID
8452
Channel
Application
Computer
pwlu0w977.paulwurth.agn
Security
EventData
Photoshop.exe
12.0.0.0
4bbc56b6
Photoshop.exe
12.0.0.0
4bbc56b6
c0000006
00e8beff
12b4
01cc3a608276fe50
C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
d70b772e-a653-11e0-b8c6-6431503f59b8
May be someone out in the user community has a solution? Needless to say, that the second machine works fine!
Lucien.

The Photoshop executable really should be showing 12.0.4.0 as the executable version should have been updated by the updater.
I'm sorry for the really basic question, but did you reboot after installing the 12.0.4 update?
I do vaguely remember a few forum posts claiming the updater had only worked partially, though in my own case it updated all the files no problem. Can you recall whether you changed anything under the Photoshop 32 bit installation area (e.g., did you move or remove any of the Adobe plug-ins, for example)?
If memory serves, the workaround for a "partial update" was to uninstall Photoshop, then reinstall 12.0.0, then update to 12.0.4.
-Noel

Oracle Service does not start after installation of Domain role

Hi all,
here is my setting:
Windows Server 2008 R2 64bit
ORACLE ONE 11g
I installed the database and it was working fine until I installed the domain controller role on this server.
Finally I needed to uninstall this role again and restarted the server several times during this process.
Now I can not access the database anymore. Listener starts, then stops.
database service stops with Windows Service Error "Could not start in a timely fashion..." (but quite immediately after starting)
Checking the database installation, I could not find the ORACLE HOME path in the env variables anymore, also not a trace of other ORACLE paths there.
This database is REALLY important to me, so if you have an idea how to restore the original state, I would be glad.
And NO , I haven´t made a backup, since it was more or less 1 day between db setup and domain role setup...
Thanks in advance...
Meden
Edited by: user10859969 on 13.01.2012 14:29

And No, you shouldn't have installed Oracle on a Domain Controller in the first place, as the activity of a Domain Controller will impair the database performance heavily.
So the best solution is CTRL-ALT-DEL and start all over again.
If the database is that important for you, why didn't you install it on a real OS, and why for heaven's sake did you promote the database server to a domain controller?
Sybrand Bakker
Senior Oracle DBA

GoldenGate Manager Does not start - Windows 7 64-bit, 11gR1 database

Hi Experts,
I ran into very tricky situation and seeking for clarification and if possible solution for the same, here how it goes: (This is a practice setup for my knowledge and not production)
My environement:
GGSCI (msheth-work) 18> versions
Operating System:
Version 6.1 (Build 7601: Service Pack 1)
Database:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
I have two database installed called gg1, gg2 on the same local system.
I have two goldengate installation at following location: C:\gg1 , C:\gg2
I was successfully able to start Manager, Extract and Replicate process with out creating windows services for manager.
I read in discussion forum that it is recommneded to have different manager name and create services for them if you have multiple Goldengate installation in the same system. (Oracle Golden Gate installation
Now when I create services using INSTALL ADDSERVICE ADDEVENTS, manager process does not start and manager report log and event viewer from windows shows following error despite of providing correct login details in manager parameter file:
2012-08-23 10:42:31 ERROR OGG-00664 Oracle GoldenGate Manager for Oracle, mgr.prm: OCI Error beginning session (status = 1017-ORA-01017: invalid username/password; logon denied).
GGSCI (hostname) 19> DBLOGIN USERID ggs_owner, PASSWORD ggs_owner
Successfully logged into database.
Manager Parameter File:
PORT 7810
USERID ggs_owner, PASSWORD ggs_owner
PURGEOLDEXTRACTS C:\gg2\dirdat\ex, USECHECKPOINTS
Your explaination and help will be highly appreciated.
Regards,
Mitul Sheth
Edited by: 954634 on Aug 23, 2012 11:46 AM

Thanks all of you to responding to my post, although I have bad news that I tried everything but it did not work. let me show you what all I have done:
1) Adding windows services for manager
GGSCI (msheth-work) 4> edit params ./globals
MGRSERVNAME MGR1
GGSCI (msheth-work) 5> exit
c:\gg1>install addservice addevents
Oracle GoldenGate messages installed successfully.
Service 'MGR1' created.
Install program terminated normally.
When I try to start manager service either from GGSCI or from services.msc it gives same login error as mentioned earlier in the post.
2) Using tnsnames while login into database:
GGSCI (msheth-work) 1> edit params mgr
PORT 7809
USERID ggs_owner@gg1, PASSWORD ggs_owner
PURGEOLDEXTRACTS C:\gg1\dirdat\ex, USECHECKPOINTS
Just to make sure username and password is fine I login into database using GGSCI command prompt as follows:
GGSCI (msheth-work) 4> dblogin userid ggs_owner@gg1, password ggs_owner
Successfully logged into database.
Hence, after making sure on all your suggestion I could not get it started and still situation is the same. I would need manager login into database becuase I have implemented DDL replication.
Also, just by removing manager service from windows, same configuration without any change works like a charm. It just that for evey goldengate process a new window is create and it can't be closed. (If closed process dies).

SAFARI does not start after installation

the problem: after installation the safari browser does not start. system: windows XP profesional 2002 service pack 2 ... regards

Same here, but solved.
Open up a Console and try starting Safari like I did:
-------8<-------
ki-iMac:Applications ki$ ./Safari.app/Contents/MacOS/Safari
------->8-------
Then it would come up with:
-------8<-------
2009-06-11 17:40:27.843 Safari[555:10b] GrowlSafari Error: Original (selector updateDiskImageStatus:) not found, Alternate (selector myUpdateDiskImageStatus:) was found
2009-06-11 17:40:27.845 Safari[555:10b] Loaded GrowlSafari 1.2
2009-06-11 17:40:27.868 Safari[555:10b] Videobox Safari Plugin loaded
Segmentation fault
------->8-------
After locating that plugin (does not reside in /Library/Internet Plugins/) with that posting:
[http://forums.macrumors.com/showthread.php?t=473842]
And the following commands in the console:
-------8<-------
# mkdir ~/Library/Application\ Support/SIMBL/Plugins/disabled
# mv ~/Library/Application\ Support/SIMBL/Plugins/VideoboxSafariPlugin.bundle ~/Library/Application\ Support/SIMBL/Plugins/disabled/VideoboxSafariPlugin.bundle
------->8-------
Everything works fine again.
Maybe I should update my Videobox?
Hope that helps!
Message was edited by: the.ki

My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think.

My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think but it is linked as a plug in with chrome and IE. How can I get my windows to recognise the .swf files to play them.

The downloaded file is the projector, not an installer; you need to make the file association manually:
move the downloaded exe file to a location you can remember, e.g. C:\Windows\SysWOW64\Macromed\Flash
right-click on a swf file and select Open with > Choose default program
navigate to the folder you saved the player and select flashplayer_13_sa.exe

J2EE Does Not Start During JAVA Add-In Installation

I'm installing Java Add-In onto ERP 2004 (Windows 2000, Oracle 9.2, Java 2 SDK 1.4.2_08).
The J2EE does not start during the installation. It gives up after some time. java -version shows the correct path.
dev_jcontrol shows the following:
[Thr 2624] Tue Aug 02 09:49:32 2005
[Thr 2624] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 2624] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_08
[Thr 2624] *** ERROR => JStartupIGetJDKInfo: Cannot find Java class file [./JdkDetection_3516.class]. [jstartxxi.c 899]
[Thr 2624] *** ERROR => can't get JDK information (rc=-1) [jstartxxi.c 1096]
[Thr 2624] *** ERROR => node [bootstrap] not found [jstartxx.c 1388]
[Thr 2624] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=-18)
[Thr 2624] JControlCloseProgram: started (exitcode = -18)
[Thr 2624] JControlCloseProgram: good bye... (exitcode=-18)

In that case, do u have multiple versions of JDKs installed ?
Maybe some earlier version is installed too ! In that case there is a program that comes along with the JDK to choose the version of the JDK that needs to be loaded into memory.
We faced this problem when we were doing our stints with JAVA Add-In wherein the system required the newest version of java where as some tool which was installed on the system required the older version.
So we used the java program to select the version to be loaded whenever the operating system tried loading the jdk.

HT201317 My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.

My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.

Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck…

Installation of TREX 7.0 on 64bit windows then SAP does not start

Similar Messages

Maybe you are looking for