Installation of Windows 8.1 Update 1 on Existing Windows 8.1 Fails

I am running Windows 8.1 Pro with all current updated, including those pushed for Microsoft Tuesday. I have attempted multiple times installing the ~ 840MB update for 8.1 Update 1. The install downloads, installs, restarts. Upon restart - message
comes up indicating working on files and then says unable to complete, rolling back. Looking in Windows Update History - it shows the package as successful but performing check for updates again shows that the update is available.
Worked with Microsoft AnswerDesk advisor for ~ 3 hours this morning with no successs. Looking to see if anyone has had any similar issue / how it was resolved.
Removed McAfee to rule out conflict
"reset" the SoftwareDistribution folder
Ran WindowsUpdate validation utility
No error codes are displayed upon the rollback. Any other suggestions appreciated. Microsoft support was escalating to a Level 2 Windows tech but unavailable for contact until tomorrow evening...hoping to fix this before that time.

Hi,
About this problem, we can check WindowsUpdate.log and
CBS log, these two log would record Windows update check and install process. You can also provide these two log file to us, we can help you analysis this problem together.
Roger Lu
TechNet Community Support

Similar Messages

Running Adobe Reader 11 installer in Windows 7 Starter fails

When running Adobe Reader 11 installer in Windows 7 Starter, it stops after 5 seconds and says, "Connection failed. Unable to complete installation." Help!

Try the full offline Reader installer from
http://get.adobe.com/reader/enterprise/

Satellite L300D-21P - Installation of Windows Vista 32bit failed

Hi!
I have recently bought a Toshiba Satellite L300D-21P and now I wanted to install Windows Vista Business 32bit.
But the installation always stops at the point where the screen says "Completing installation ... ".
Do you have any idea what I have to do to solve this problem?
Thank you very much for your answers!
Greetz
Stefan

If you are using the Toshiba Recovery disk then you dont need to install SATA drivers.
If you are using Microsoft disk then you will need the SATA drivers.
But if the error message says that the installation is complete then the HDD has been recognized properly and you should not need the SATA drivers in such case.
> From where do I get the SATA-drivers?
It looks like your notebook supports AMD CPU and ATI chipset.
Graphic card driver contains the chipset driver and the necessary SATA drivers.
The graphic card driver contains the different folder and the drivers are placed in folder:
Packages\Drivers\SBDrv\Filter\NB

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update.

When my downloading until 80%, appear Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update."

What product and version number are you talking about. Is it a trial version, or is it the full or subscription version. If the latter, activate the product with your S/N or Adobe ID and then do the updates.

[Forum FAQ] How to show Windows Update in Control Panel in Clean Installation of Windows 10 Technical Preview Build 9926

Scenario
If you performed a clean installation of the new Windows 10 Technical Preview Build 9926, you would find Windows Update is only available in
Settings and is hidden in Control Panel by default. However, Windows Update is still available in Control Panel if it is an upgrade version of Windows 10 Technical Preview Build 9926.
Solution
After the comparison of the two different version, the differences is the following registry:
HKLM\SOFTWARE\Microsoft\WindowsUpdate\UX\IsConvergedUpdateStackEnabled
In clean installation version:
In upgrade version:
The method to make Windows Update show in Control Panel in the clean installation of Windows 10 Technical Preview Build 9926:
Edit the REG_DWORD value of IsConvergedUpdateStackEnabled from 1 to 0.
Applies to
Clean installation of Windows 10 Technical Preview Build 9926
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

We’ve seen a few forum posts talking about changing registry keys to alter the update experience we shipped in Technical Preview build 9926. There are a couple of reasons that we don’t recommend doing things like that.
First, the default experience is what we’ve tested across not just the Windows 10 team, but across all of Microsoft before we released it to you. That doesn’t mean that you won’t still find bugs, but it’s definitely the code that’s been most thoroughly
tested. Changing things back to older versions is risky because the combination of those old settings with the rest of Windows 10 is not something that’s been validated or supported, so we can’t predict the side effects. It’s possible that changing registry
settings related to update could cause a machine to no longer be able to get new updates or Technical Preview builds.
The other reason to avoid changing the default update experience is that a lot of update-related code is actually being re-written in order to scale across the variety of different device types Windows 10 will support. Since Technical Previews are
a work-in-progress, some code that may still be in build 9926 won’t actually ship in the final version of Windows 10 that we provide to all our customers, so trying to re-enable that code temporarily won’t provide a way to accurately assess Windows 10’s update
capabilities.
We want to hear your feedback! We’re sharing Technical Preview releases early so we can understand exactly how customers are using our software and make sure we are designing our experiences to address those scenarios. The more
specific the feedback, the more helpful it is for us – saying “I hate the new Windows Update UI” isn’t very useful, but when we see “I need to be able to tell Windows Update to grab updates from WU itself and not from my internal corporate server, so the new
Windows Update UI is painful for me”, we can actually understand what changes we could make to solve those specific problems. We can’t promise to fix everything that everyone asks for – and sometimes what one customer wants is exactly what another customer
doesn’t want – but the more you can help us understand why you want something changed, the better we can try to meet those needs.
Thanks for listening, and we look forward to hearing your responses.
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/warning-disabling-the-new-windows-update-ui-may/dc846517-eca0-4960-b0ff-1eb7227223f5

The latest Firefox update, installed this morning 6/21/2011, disabled McAfee. After installation, a window appeared stating that McAfee was not compatible and couldn't be enabled. This is NOT ACCEPTABLE! Please let me know how to uninstall this update.

The latest Firefox update, installed this morning 6/21/2011, disabled McAfee. After installation, a window appeared stating that McAfee was not compatible and couldn't be enabled. This is NOT ACCEPTABLE! Please let me know how to uninstall this update.

Upgrade your browser to Firefox 8 and check
* getfirefox.com

Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MB

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

MSI 975X PROBLEM WITH INSTALLATION ON WINDOWS VISTA

I have MB MSI-975X PLATINUM v.1 withbios ver 1.3,processor Pentium D940 (3,2GHz/800/2x2MB),2X512MB DDR-2 667MHz,in the beginning when I start the installation on WINDOWS VISTA the computer is bloked od it is restart.This problem I solved when I put another processor INTEL 541(3,2GHz/800/1MB) whit this processor everthing is ok,but with INTEL 940 it can not be install WINDOWS VISTA .
I’m asking you for a new superstructure on bios update .

Beta 2 or RC1 candidate???? RC1 should support..........
Beta 2 is real, slow and you have alot of updates to DL, but both are pre-release products and will not work 100%.
Even when Vista is released, they will still be alot of hardware that will not work 100% and this is purely because software is always playing catch up to hardware.
It was only September, when Nvidia released some Beta2/RC1 drivers that worked properly........

ITunes installation on Windows Vista

Hi there. As everyone knows Windows Vista is already available in MSDN. I've already got it. The problem is that the installer of current iTunes version (7.0.2) doesn't want to install the program. The error message tells smth about wrong or impossible disk E:\. So please update the installer because I want to update my songslist in iPod:)

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

HT1923 iTunes on my Windows Vista has failed to update over several weeks. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting

iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??

Hey petanque1,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

10g installation on Windows

I have a Windows server that is currently running 3 instances from the ora92 home. I installed 10g into a new home TEST102, everything worked fine except for the Net config assistant choked, below is the log tail:
INFO: Starting to execute configuration assistants
INFO: Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=E:\oracle\ora102SE\bin -classpath ";E:\oracle\ora102SE\jdk\jre\lib\rt.jar;E:\oracle\ora102SE\jlib\ldapjclnt10.jar;E:\oracle\ora102SE\jlib\ewt3.jar;E:\oracle\ora102SE\jlib\ewtcompat-3_3_15.jar;E:\oracle\ora102SE\network\jlib\NetCA.jar;E:\oracle\ora102SE\network\jlib\netcam.jar;E:\oracle\ora102SE\jlib\netcfg.jar;E:\oracle\ora102SE\jlib\help4.jar;E:\oracle\ora102SE\jlib\jewt4.jar;E:\oracle\ora102SE\jlib\oracle_ice.jar;E:\oracle\ora102SE\jlib\share.jar;E:\oracle\ora102SE\jlib\swingall-1_1_1.jar;E:\oracle\ora102SE\jdk\jre\lib\i18n.jar;E:\oracle\ora102SE\jlib\srvmhas.jar;E:\oracle\ora102SE\jlib\srvm.jar;E:\oracle\ora102SE\oui\jlib\OraInstaller.jar;E:\oracle\ora102SE\lib\xmlparserv2.jar;E:\oracle\ora102SE\network\tools" oracle.net.ca.NetCA /orahome E:\oracle\ora102SE /orahnam OraHome102SE /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile E:\oracle\ora102SE\network\install\netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = E:\oracle\ora102SE
Parameter "orahnam" = OraHome102SE
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = E:\oracle\ora102SE\network\install\netca_typ.rsp
Done parsing command line arguments.
Environmental error detected: The current Oracle Home and the Oracle Home passed from the installer are not the same. Oracle Net Configuration Assistant cannot continue.
It is recommended that you continue installation without completing Oracle Net configuration. Once the installation is complete run the Oracle Net Configuration Assistant separately after checking that the ORACLE_HOME environment variable is not set (preferred on Windows platforms) or that it is set to the correct Oracle Home.
Oracle Net Services configuration failed. The exit code is 1
Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe has failed
Execution Error :
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=E:\oracle\ora102SE\bin -classpath ";E:\oracle\ora102SE\jdk\jre\lib\rt.jar;E:\oracle\ora102SE\jlib\ldapjclnt10.jar;E:\oracle\ora102SE\jlib\ewt3.jar;E:\oracle\ora102SE\jlib\ewtcompat-3_3_15.jar;E:\oracle\ora102SE\network\jlib\NetCA.jar;E:\oracle\ora102SE\network\jlib\netcam.jar;E:\oracle\ora102SE\jlib\netcfg.jar;E:\oracle\ora102SE\jlib\help4.jar;E:\oracle\ora102SE\jlib\jewt4.jar;E:\oracle\ora102SE\jlib\oracle_ice.jar;E:\oracle\ora102SE\jlib\share.jar;E:\oracle\ora102SE\jlib\swingall-1_1_1.jar;E:\oracle\ora102SE\jdk\jre\lib\i18n.jar;E:\oracle\ora102SE\jlib\srvmhas.jar;E:\oracle\ora102SE\jlib\srvm.jar;E:\oracle\ora102SE\oui\jlib\OraInstaller.jar;E:\oracle\ora102SE\lib\xmlparserv2.jar;E:\oracle\ora102SE\network\tools" oracle.net.ca.NetCA /orahome E:\oracle\ora102SE /orahnam OraHome102SE /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile E:\oracle\ora102SE\network\install\netca_typ.rsp
Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe has failed
Execution Error :
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: --------------------------------------
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25029:One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
INFO: User Selected: Yes/OK
INFO:
*** End of Installation Page***
The installation of Oracle Database 10g was successful, but some optional configuration assistants failed, were cancelled or skipped.
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK
INFO: hashcode for cfSession for exit tool exec: 4403749
INFO: executing the single exit-only tool
Now I am trying to run the Net config assistant outside of the installer and configure a 10g listener for the 10g instance using a port different from the 1521 that teh 9i listener is using and it keeps telling me that:
The information provided for this listener is currently in use by other software on this computer. You can proceed with the configuration as is but it will not be possible to start the listener until the conflict is resolved...
I have tried several different ports (the only thing that could be in conflict, I think) and I keep getting the same message..
HELP!!
Has anyone out there set up a 9i and 10g installation on Windows using two different listeners, one for the 9i and another for 10g?

Yes, I have read this other thread you have cited but there is no conclusion - other than maybe by rerunning the install he overcame the issue and never completed the thread. In my case, the initial 10g install failed to run the net config assistant and there never was a 10g listener service created. Also, now I try to run the net config assistant stand alone and it refuses to create a listener service...claims that there is a conflict, even if I try on other than the default port.
I'm thinking the conflict lies with the fact there is an up and running 9i listener service and yes that listener is active because it is servicing a live production instance.
Our goal was to install a 10g instance with it's own separate listener, import our schemas and test our app on a 10g database then one day turn the 10g into the production instance.
Our plan was to avoid endangering the production environment by even trying to service the 9i database with the 10g listener. You cannot use a 9i listener for a 10g database but from what I read in the other thread you have cited, to try to fire up the 10g listener to service the 9i production instance would have resulted in a loss of servicve to the production environment if I experience the same phenomena as the fellow in the other thread.
Thank you for your time and consideration here...
I believe I should propose to have a separate server box set up to host this new 10g database. Our overall objective is to keep the production system up and running no matter what.
In the old days I remember that if too many attempts were made at installing on a Windows platform the registry would get hosed up beyond repair and the only out was to re-image the box and start over with a fresh copy of teh Windows operating system:-)
Let me know if you have any further suggestions...
Regards-
Jim

Something happened and your installation of Windows 8.1 couldn't be completed

I have a brand new Acer with Win 8 installed. I've removed McAfee. Other than that the machine is as delivered.
Trying to download 8.1 and install it from the store. It sits there for a couple of minutes then says:
Your Windows 8.1 installation couldn't be completed
Something happened and the installation of Windows 8.1 can't be completed.
Now apart from this being really annoying could anyone have come up with a less useful message?
I have tried it several times. I've run the compatibility util and it passes. I've tried the store without logging in, then tried the store with logging in.
I've tried it in Firefox, tried it in IE.
Same result every time.

OK, so I posted 2 days ago about this issue, and I resolved it yesterday. I essentially performed a "refresh" under Windows 8, which removed a lot of the updates and applications that could be potential issues.
I then had to go to the Sony website to re-install the latest drivers, SW and driver patches related to my Vaio Duo (I had already updated the firmware and Bios -- necessary to install Windows 8.1--). I then had to re-install all Windows 8 updates,
and magically, the Windows 8.1 update started to download when I clicked on it in the Windows Marketplace. I do not know what was the source of the problem, but the refresh definitely got rid of it. It is a long process however as a lot has to
be reinstalled to bring the refreshed system to its full functionality with the latest manufacturer and Microsoft updates for Windows 8.
I can't see how a non-technical user could perform all these steps to upgrade a recent tablet to Windows 8.1!
Good luck!
Olivier

Qosmio F30: How to: Manual Installation Of Windows Xp Media Center Edition 2005

Manual Installation Of Windows Xp Media Center Edition 2005 On Toshiba Qosmio F30 Laptop
Last Update 3 Oct 2006
Important Notes Before You Start:
1-These Steps Used For "Toshiba Qosmio F30" And For Other Qosmio Models That Comes With "Intel Centrino Duo" Cpu's And With Xp Media Center 2005 Installed.
2-Apply These Steps If You Have Previous Experience In Installing Windows Xp , If You Don't Have That Experience , Then You Can Use The Supplied Recovery Cd To Restore Your System.
3- Windows Xp Media Center Cd's Are Not Supplied With Your Laptop, If You Want To Get The Cd's You Can Buy It From Many On-Line Shops And If You Do So You Will Get Valid Windows Xp Product Key Which You Will Not Need It (Because You Already Have One You Can Find It In A Small Sticker In The Back Of Your Laptop And You Can Activate Your Windows With It).
In Other Words ( You Need The First And The Second Cd Of Windows Xp Mce 2005 SP2 Oem).
4- Do Not Try To Apply These Steps On Other Versions Of Windows Xp , Use "Windows Xp Media Center Edition 2005 Sp2 Oem" Only
5- You Must Have Usb Floppy Drive To Install "Toshiba Raid Controller" , It Can Be Installed Only By Having The Driver On a Floppy Disk And By Pressing F6 During The Installation Of Windows Xp, If You Do Not Install The Raid Driver Then Windows Xp Will Not Recognize Your Hard Disk.
6- Disclaimer of liability
I shall not be responsible or liable, directly or indirectly for any damage or loss caused or alleged to be caused by or in connection with the use of the this site or its content, including but not limited to delays, omissions, and inaccuracies in its content.
Steps:
1- Create Drivers Cd From "Toshiba Assist Utility" ,You Should See The Toshiba Assist Icon On The Desktop, Then In The Toshiba Assist Choose The 'protect & Fix' Tab ,There You Will Find The Option `Create Drivers & Tools Cd` And Insert a Blank Cd To Write It
"If This Option Did Not Work Then You Have To Install The Restore Cd To Get It Work" , The Drivers Are Installed In A Folder Called Toolscd In "C:" Drive. To Install Your Recovery Cd Power On Your Laptop And Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From the Cd.
2- Create Toshiba Raid Driver From The Drivers Cd, The Toshiba Raid Driver Has To Be Added During The Installation of Windows XP When Asked To "Press F6 If You Need To Install A Third Party SCSI Or Raid Driver".
In Order To Do That , Insert The Drivers Cd "from Windows " It Will Run Automatically Or Run "Browser.Exe" Inside The Cd The Select "Raid Driver" And Click On "Installation" Button, It Will Show You The Raid Driver files , Insert A Blank Floppy And Copy The Files Into The Floppy "Be Sure That All The Files Be On The Root Of The Floppy" or download the Toshiba RAID driver from the Toshiba driver download web page and extract the zip file to a floppy disk."Again, All The Files Should Be On The Root Of The Floppy Not Inside A Folder"
3- Connect Your Usb Floppy Drive And Insert Your Windows Xp Mce 2005 Cd 1 And Power On Your Laptop Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From The Cd.
When You Get The Message To "Press Any Key To Boot From Cd...", Press Any Key , If You Do Not Press Any Key, It Will Not Boot From Cd-Rom,Press F6 When Asked To "Press F6 If You Need To Install A Third Party Scsi Or Raid Driver".
The Setup Continues Until You Are Asked Whether You Want To "S = Specify Additional Device". Press 's' And Specify The Toshiba Raid Driver For Xp. Then Press 'enter' To Continue With The Installation.
Do Not Upgrade Your Xp Installation ,Start New Windows Installation And Partition Your Hard Disk , Windows Installation Will Ask You To Insert Cd 2, And Will Copy Some Files And Will Ask You To Insert Cd 1 Again ,Continue The Setup Until Windows finish The Insallation.
4- After Windows Finish The Installation Insert Drivers Cd And Select "Microsoft Updates" From The Drivers Cd Click On"Installation Button" ,Click "Qfe" And Install ONLY the Following Updates (Do Not Let The Updates Restart Your PC Until You Finish The Installation of All Updates)
A- Q896256
FIX "Computers That Are Running Windows Xp Service Pack 2 And That Are Equipped With Multiple Processors That Support Processor Power Management Features May Experience Decreased Performance"
B-Q910437
FIX "High Hit Count Watson Crash In Wu Client"
C-Q889673
FIX "Hardware (Dep)-Enabled Computer May Unexpectedly Quit After You Resume From Standby Or From Hibernation In Windows Xp Service Pack 2"
D-Q896243 (Very Important ,This Will Make SD And MMC Cards To Work)
FIX "ADD Support The High Speed SD Card"
Other Updates Are Not Necessary To Install, Because You Will Install It Later When You Run Microsoft Updates From Microsoft Updates Web-site After You Finish Activating Your Windows.
5- download and run "Intel(R) Chipset Software Installation Utility" from Intel website
(Restart Your PC After You Finish The Installation)
Do Not Install "Chipset Driver" From The Drivers Cd , It Is An Old Version , Try To Install The Latest From The Link Above.
6- Install The "Display Driver" From Drivers Cd (No Need To Restart).
Note : To Avoid Annoying Messages During Drivers Installation Try To Do The Following:-
Go To Control Panel , System Properties , Hardware , Drive Signing , Select "Ignore - Install The Software...."
Go To Control Panel , System Properties , Hardware , Windows Update , Select "Never Search Windows Update For Drivers"
7- Now You Have To Setup Your Internet Connection and Activate Your Windows So That You Can Run "Windows Updates" From Microsoft Windows Update Website
Your Internet Connection May Need One Of The Following Drivers (Depending On Your Modem)
A- If You Your Internet Connection Through LAN Then Install The "Network Driver" From Drivers Cd.
B- If You Your Internet Connection Through Wireless Then Install The "Wireless Network Driver" From Drivers Cd.
C- If Your Internet Connection Through USB Then Install The Driver Supplied By Your Modem Manufacturer.
D- If Your Internet Through Dial-Up Then Install The "Sound Driver" From Drivers CD , This Driver Will Install The Sound Driver And Will Activate The Modem Device and ,A Message Appeared "Find New Hardware ,Modem Device" Ignore The Message And Restart Your PC Then Install "Modem Driver" From Drivers Cd.
8- Now Go To Windows Update Web-Site And Install All The Necessary Updates "Try To Run Windows Updates Several Times Until You Install All The Updates Because In The First Time, Windows Updates Website Will Install 3 Files Only After That Restart Your Computer And Go To Windows Updates Site Again And Continue To Install The Updates , Select Custom Updates Method And Install All The Critical And Optional Updates".
9- install "Common Modules" from drivers CD This module is an essential component on Windows XP systems It is required to make other TOSHIBA original programs work properly.
10- Now Continue To Install Other Drivers And Utilities From Drivers Cd But Do Not Install The Following Drivers:-
Atheros Client Utility " No Need"
Bluetooth Monitor " Do Not Install This , Install Only The "Bluetooth Stack".
Enjoy Your Powerful Toshiba Qosmio Laptop.

you can see this tutorial also in this website
salah.coms.ph

Installation of Windows 8.1 in the Maverick Bootcamp Issues

When installin the Windows 8.1 on the Bootcamp partition of the OS X Mavericks. I have removed the original optic drive and placed it in a seperate case connected USB. The Bootcamp 5.1 (and 5) have both been used to attempt the installation. The Bootcamp partition is created. Once the two check boxes have been selected (I have assumed that the first check box must only be done once in order to save this to the USB flash drive). Upon the Bootcamp Assistant recognizing this installation a pop up will tell you to give the disc a few seconds to recognize the you click the OKAY box. The desktop will fade out and the Apple loader (circle will be in view). The desktop will then reboot to what appears to be the installing of the windows disc. Upon the self reboot the screen will go to a quick gray (5-10 seconds) then default to a Blackout screen with a flashing cursor in the top left corner (this is the same quick screen that occurs whenever WIndows 7 or 8 is in it's boot initial start). Now from hear the installation never continues. At this point I have tried the methods and have spent 8 hours with both the LeveL 2 technicians at APPLE and MICROSOFT. To no avail!!!! There would appear to be a conflict between the Windows EFI files at booting the windows and the Bootcamp assistant installation commands for the partition booting for install. Nobody as of yet has come up with the solution or answer/fix. If anyone has seen this or has found a work around for this issue. Please feel free to post. I feel this is either a very simple issue that we are all overlooking or this has not been addressed as of yet. As I understand both parties are saying that they have been getting many calls regarding this issue but have not understood why it is occurring. I will be will to post different scenarios that have been attemted. Again if anyone has seen this and/or found a way to make this work please post you methods and/or thoughts. Oh by the way, all of the installations directions dealing with the Windows step by step instruction from both Windows and Apple have not worked. If the hard reboot is done and holding the option key (therefore giving you your drive selection options) you can see the Windows disc in the external drive but it will not boot to that drive. This leads us to believe that the USB is the conflict with the Windows EFI files. We have attempet this also from the Flash drive installation using the .iso but upon the hard reboot/option start the flash drive .iso file is not available for disc selection. This has led me to think that a .iso copy could be placed on the new bootcamp partion (in the Disk utility application) but I am uncertain if this could be booted form the hard reboot/option startup. Just some thoughts. So again, our final stage is staring at a Black screen with a cursor flashing, oh and there is no keyboard entry recognized at this point. In order to exit you must hard reboot/option restart to get back to the Mac HD. Looking forward to your ideas folks!

Okay, new update! As of today, I have been able to finally create a .ISO bootable flash drive that contains the new Windows 8.1 Pro. Once the bootcamp partition has been made I can now interrupt the reboot process and using the Option Key select the new EFI bootable Windows disk (on USB) it's orange. The Windows begins to load and takes me through a few steps of selecting language and enter the product key. Then we move on to the selection of the partition that is to be used for the installation of Windows. Here is where I have tried several different types of things but have not been able to get through to the installing. Depending on what selection was made during the Bootcamp partitioning installation from my Utilities in Mavericks will depend on the faults that I get. If I choose to erase and make a new installation on the new bootcamp partition then during the Windows installation (at the partitioning step) I will get the error that Windows cannot be installed on the MBR disk (Master Boot) and must be done on the GPT disk. If I try any of the disk options at this point it will either delete the partition (and cannot ADD a new partion) therefore I am forced to return back out to the Mac HD OS and restart the Bootcamp process OR If in the Bootcamp set up I choose the first option to make a partition for the Windows installation then once I get into the partitioning set up for the Windows install it says the same thing. Now I have also attempted all of the other options even the load drivers option (assuming that maybe this will allow me to load disk drivers to read the Bootcamp HD) Nope, still no continuing on to installation. I have read many days on several other methods used in the Forum. By the way, thanks for all the posts it has allowed me to be able try just about everything to include the cloning of the Info.plist files and teminal authorizations for USB and so on. I'm not a supertech but have been able to find my way around with some difficulties. The real issue here is that Apple and Microsoft have yet to make this process very easy even for someone who has some experience with this. I have loaded Windows 7 on several other Macbook Pros operating earlier versions of the OS X but this has become absolutely too time consumming to ever wish to continue to operate MAC products in my preferred Windows. I have used other 3rd party boot patitioning programs such as Parallels and VMware. My experience with these types of programs make the install process much easier but in time as different OS software updates are applied these programs tend to have different problems forcing the user to make odd corrections at the most in opportune times. If there is anyone that has any information to further my progress I am all ears to see what may be the fix!

Installation of Windows 8.1 Update 1 on Existing Windows 8.1 Fails

Similar Messages

Maybe you are looking for