Installation of windows server 2008r2 on dell power edge 2850

I just received an dell power edge 2850, can I install windows server 2008r2 on this unit

Hi rpalmer,
To avoid some potential issues ,It is recommended to contact to DELL for further assistance . Although someone can install 2008R2 on PE 2850 .
http://en.community.dell.com/
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Unable to do Bare Metal Restore on Windows Server 2008R2 Backup from USB Seagate Backup Plus Harddrive

I have done a windows full server backup on to an external Seagate HDD on a Dell PowerEdge T110 II Server running Windows Server 2008 R2
I want to clone this and do a Bare Metal Restore on an identical server at home which has Windows Server 2008 R2 on it.
I boot from the Windows DVD provided, select repair however windows Server 2008 R2 will not find the image of the Seagate drive. The Seagate drive can be seen on the server otherwise. I guess there are options to load the driver, but I don't see them.
Please help. Kind of stuck here
Thanks

I am using a windows server 2008R2 disk to boot up. Both the servers have windows server 2008R2 on them. I have two licenses for each of the servers. I want to use the server at home as a backup server in case the server in office goes down. I used
windows server backup to backup the server at work to a portable USB hard drive. I bought the hard drive home and want to clone the server at work. I heard bare metal restore is the best way to do this. So I booted the server at home with the windows server
2008 r2 disk that I have and clicked repair. I had attached my seagate portable drive to the usb port so that the server could find the image of the server at work, however the server cant find the hard drive or the server image. Is it a problem with my usb
hard drive? Do I need a specific type of usb hard drive to do server image backups?
If I let my server at home boot regularly and it comes up, it can see the image on the hard drive so I dont know how to do the bare metal restore. I know it can be done becuase my IT guy did it when he set up both the servers. I just want to periodically
clone them so make sure the server at home is updated with the settings of the server at work.
Thanks for any help here

Can't Open Reports after upgrading to Windows Server 2008R2

Since upgrading to Windows Server 2008R2, I am unable to use File > Open to browse my network for existing Crystal Reports. I am able to access reports from my recent reports list. If I use Windows Explorer to try to find/open an existing report file, I'm prompted for the installation disk. Is this a known issue? Thanks for your help.

SP2 fully supports Windows 2008 Server, here's a link to the [platforms PDF|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/00225757-ab5c-2c10-c1a8-fb9f9f0f4ac2&overridelayout=true] file:
As for permissions this is something you need to setup with Windows and file sharing.
Thank you
Don

System Cache Issues with Windows Server 2008R2

Hi,
I'm trying to deploy Java version 1.5.0 (build 1.5.0_14-b03) on a new Windows Server 2008R2 installation. I want to use the system cache feature and have used it successfully on Windows XP workstations and Windows 2003 servers in the past. I even got it to work on a test Win Server 2008R2 server earlier this week. But on my production machine I can't get the system cache to configure.
I installed Java as usual and it installed into the Program Files(x86) directory. I copied my deployment files to the c:\windows\sun\java\deployment directory.
Deployment.config contains:
deployment.system.config=file\:/c\:/windows/sun/java/deployment/deployment.properties
Deployment.properties contains:
deployment.user.cachedir=C\:\\Program Files\\HCN
deployment.user.cachedir.locked
deployment.system.cachedir=C\:\\Program Files\\HCN
deployment.javaws.shortcut="NEVER"
deployment.javaws.autodownload="NEVER"
Not sure what's missing here especially since it worked fine the other day.
Both of these servers are virtual, VMware ESX 3.5 and were created from the same template. Only real difference is the production system will be a XenApp application server so it has XenApp installed.
Error I'm getting is that in Javaws it reports that the system cache is not configured and every time I launch my application it has to download from the source because we are deleting the local profiles when the user logs out.
Any suggestions?
Thanks in advance,
Linn

> I just wanted to know whether there will be any sort of communication or support issues between PROD and DEVE systems with such diverse configurations.
No.
You could even use HP-UX on the DEV system - as long as you're able to share a common directory to ensure transporting it's not a problem. Transports are OS and DB independent.
However, memory management and security in Windows 2008 changed significantly, you may have to use different configurations for W2K8 vs. W2K3.
Markus

Which free linux can I use on a Dell Power Edge Server 2650

Dear all,
I have recently joined the subscription program and want to install Netweaver. From my old company I could purchase a couple of Dell Power Edge Servers 2650 with 6GB RAM, Dual Core etc - so plenty of hardware. As next step I want to install a linux OS to be able to to install SAP trial version and/or the Netweaver software from the subscription program.
In the compatibility section I have read that I need either SUSE or RedHat linux enterprise edition. But these enterprise editions cost money when purchasing it. Is there also a free linux edition that I could use? If not, which enterprise linux would be the cheapest that I could use?
Thanks and best regards
Daniel Blaschkowski

Hi Daniel,
you can download a copy of the installation DVD of SUSE Enterprise Server 10SP2 for free from the Novell's Web Site. You won't have support nor will you be able to get software updates but it will allow you to get a first feeling about Netweaver on Linux.
Another option is to use [Centos |www.centos.org] that is a clone of Redhat Enterprise Server. You will have to cheat a little bit to be able to install SAP on it (you have to make your Centos appear like it is a true Redhat) but it works without a hitch.
Of course, do not run any production instances on such setups as you will get into trouble with SAP support in case you open up a problem message related to these platforms
Have fun,
Seb

Upgrading from Windows Server 2008r2 to 2012r2

We have an existing Windows Server 2008R2 which Crystal Reports delivering reports via our website.
On the Windows 2008 server, we used Crystal Reports version 2008.
I am now updating my Windows Server to 2012, and because Crystal Reports 2008 does not work on this server, I am trying to use the latest version. (I downloaded the trial -- once it works, I will purchase.)
Below is the Web.config file I have on the 2008 server (and this works on the 2008 server
<?xml version="1.0"?>

<configuration>
    <appSettings>
        <add key="CrystalImageCleaner-AutoStart" value="true"/>
        <add key="CrystalImageCleaner-Sleep" value="60000"/>
        <add key="CrystalImageCleaner-Age" value="120000"/>
    </appSettings>
    <connectionStrings/>
    <system.web>
        
        <compilation debug="false">
            <assemblies>
                <add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                <add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                <add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                <add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                <add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                <add assembly="CrystalDecisions.ReportAppServer.Controllers, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                <add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                <add assembly="CrystalDecisions.Enterprise.Viewing.ReportSource, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/><add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
                <add assembly="CrystalDecisions.ReportAppServer.CommonObjectModel, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                <add assembly="CrystalDecisions.ReportAppServer.DataDefModel, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                <add assembly="CrystalDecisions.ReportAppServer.ObjectFactory, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                <add assembly="CrystalDecisions.ReportAppServer.ReportDefModel, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                <add assembly="CrystalDecisions.CrystalReports.TemplateEngine, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                <add assembly="System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                <add assembly="System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                <add assembly="System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                <add assembly="System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                <add assembly="System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                <add assembly="System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                <add assembly="System.Web.Services, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                <add assembly="System.DirectoryServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                <add assembly="System.DirectoryServices.Protocols, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                <add assembly="System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                <add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                <add assembly="System.ServiceProcess, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                <add assembly="System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                <add assembly="System.Web.RegularExpressions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                <add assembly="CrystalDecisions.Data.AdoDotNetInterop, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/></assemblies></compilation>
        
        <authentication mode="Windows"/>
        
        <httpHandlers><add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/></httpHandlers></system.web>
</configuration>
What do I need to install and what changes to the web.config do I need to make to have my reports continue to display via my website?

First, you need to download the new SDK - it's no longer available as part of the Crystal Reports install.
To do this go here: http://scn.sap.com/docs/DOC-7824. Download and install the latest version of the "Install Executable" to get integration into Visual Studio. The other installs are the runtime installs - select the appropriate runtime install for your environment.
Now you have to upgrade your application to VS 2010 or newer. There are some changes to the SDK, so you can't just replace the assemblies in your existing application's configuration. DO NOT compile as "any CPU", you need to specifically target either x86 (32-bit runtime) or x64 (64-bit runtime). If you target the 32-bit runtime (which will run on a 64-bit server!) and you're using ODBC, you'll need to create 32-bit ODBC connections on the server. In any case, when working in VS, you'll need 32-bit ODBC connections for testing.
-Dell

Windows Server 2008R2 profile unload impossible due to Temp "Z@.." files

Hi,
We are supporting many environments for different customers.
Unfortunately they all share the same issue, which is caused by the combination of Windows Server 2008R2 and Adobe Reader 11.
The files are located in "C:\Users\Some-User\AppData\Local\Temp\2\acrord32_sbx\[email protected]"
There are many folders, for one user sometimes up to 20 folders (user.domain.001, user.domain.002 etc), collecting up to wazoo.
Removing hotfixes do not solve the issue, neither does the two provided acroct.ini files (to be placed in \windows\ folder).
All Servers are up2date on Windows update, conform a Patch Policy we maintain.
We have tried removing Windows updates, ofcourse with a deny on the patch policy so that it doesnt return, but the issue stays occurring.
I'd prefer to have this issue resolved by installing a patch - Instead of removal of patches.
As I am searching for a way to directly contact Adobe Support, I could only opt-in on this forum to get support afaik.
If needed, I can put down more information ofcourse.
Server info:
Hypervisor: VMware 5.1
OS:     Windows Server 2008 R2 SP1 (used as Terminal Server, one of 5 servers total)
RAM:     12GB Memory
Adobe Reader version:     Adobe Reader XI (11.0.06)
Anyone who can help out get professional support, please don't hesitate to respond.
Regards, Michael

I have read many many articles for this issue.
Outcome is, like from this Blog, Adobe has to re-code Reader.
We have tried alot of ways to get this fixed, but neither uninstalling MS Patches, nor the AcroCT.ini files (yes both) are a fix for us.
If Adobe Reader needs to use temporary fonts for printing the PDF files, they have to Force unload and clean up the temporary fonts/files. (Font Installation and Deletion (Windows))
Since MS14-045: Description of the security update for kernel-mode drivers: August 27, 2014 there is a new behavior for Font and Font Resource installation/deletion.
Since Adobe Reader has NO support channel, NO way of contacting other than the forums:
How on earth could we get this to be fixed in a new release???
Should this message be posted on all threads for this annoying issue?
We are facing this problem with over 10 customers on over 600 Remote Desktop Servers - No way I am going to remove patch #1 from August 2014, which is being re-deployed in a newer fix every month..
The root cause is the programming in Adobe, which had been conform Microsoft's wishes, but this behavior change in removal has to be remarked to Adobe...
Regards and awaiting a way into the developers part on Adobe Reader.
Michael

Installing Oracle 11gR2 Standard Edition on WINDOWS Server 2008R2 with ASM

Hi,
I want to setup Oracle 11g DB (11.2.0.2) Standard Edition on Windows Server 2008R2 x64 bit with ASM Instance. I would appreciate if you could suggest me with the following little but important questions.
The following link from Oracle doesnt have 11.2.0.2 db version for windows x64 bit. Do a patch (which I think is a complete installation) is needed to install after installing 11.2.0.1? or I can directly install 11.2.0.2?
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
Secondly, I have no such experience regarding installing and setting up ASM Instance on windows. How many disks or etc is needed for ASM (as ASM disks). One of the admin guy said, he has 6 disks (2 for OS and 6 you can use for Oracle or ASM so so). Could you please suggest, how should I divide the disk partitions of what should I say no idea :(
Also, do ASM instance (diskgroups,disks) should be setup before creating DB (through dbca?)
I was thinking like:
- Installing Oracle software
- Creating ASM disks,diskgroups,instance,etc
- Creating DB (using dbca?), isnt' it?
Bundle of thanks in advance.
Best Regards

K-Saf wrote:
Hi,
I want to setup Oracle 11g DB (11.2.0.2) Standard Edition on Windows Server 2008R2 x64 bit with ASM Instance. I would appreciate if you could suggest me with the following little but important questions.
The following link from Oracle doesnt have 11.2.0.2 db version for windows x64 bit. Do a patch (which I think is a complete installation) is needed to install after installing 11.2.0.1? or I can directly install 11.2.0.2?
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
Secondly, I have no such experience regarding installing and setting up ASM Instance on windows. How many disks or etc is needed for ASM (as ASM disks). One of the admin guy said, he has 6 disks (2 for OS and 6 you can use for Oracle or ASM so so). Could you please suggest, how should I divide the disk partitions of what should I say no idea :(
Also, do ASM instance (diskgroups,disks) should be setup before creating DB (through dbca?)
I was thinking like:
- Installing Oracle software
- Creating ASM disks,diskgroups,instance,etc
- Creating DB (using dbca?), isnt' it?
Bundle of thanks in advance.
Best Regards-You should create ASM
-After this you could be able to create DB

Audio service hangs on Windows Server 2008R2 with Remote Desktop Services

Hello!
I have some terminal servers on Windows Server 2008R2. Users have the ability to use web browsers (IE, Firefox) with the included Flash Player, IM clients / Internet
telephony (Skype, ICQ), Windows Media Player, Office, and a specific internal software (works with MS SQL). I have the following problem: the Windows audio service hangs up that leads to hangup of all programs which use it, such as: any sites in Internet with
a flash content (in all browsers), ICQ, Skype.Even logging out the session hung when tried to lose a sound. It's impossible to stop or restart service from the services.msc the service just hang with status "restarting". To stop service I terminate svchost
process. As soon as the audio service is stopped - all programs start to work correctly (certainly without a sound). This problem appeared not suddenly - periodic hangups of programs on servers were marked long ago (more than half a year), but not directly
were connected to audio service, especially there were they rather rare (on the average once a week - two) and were corrected by server reset. The error message:
Error container , type 0
Event name: AppHangXProcB1
Reply: No data
Ident CAB: 0
Problem signature:
P1: iexplore.exe
P2: 9.0.8112.16446
P3: 4fb57c8f
P4: 77c1
P5: 131200
P6: svchost.exe:AudioClientRpc
P7: 0.0.0.0
P8:
P9:
P10:
shall suggest an idea about a sound service, but in Event Viewer has no Windows Audio events.
Recently I updated Skype to the last version 6.0.66.120. Before was 4.2.35.155 because versions 5хх on Windows2008R2 with the Remote Desctop Services actually don't
work, if users at the server more than one or two. We checked the sixth version by the test machine with the terminal environment and very were delighted to its normal working capacity. However after installation of this client on production servers it appeared
that hangups of programs on servers began to occur on the average time at an o'clock in case of an average daily load (about 20 users on one server). If you have worked one or two users, problems weren't watched. Internet search led me to the support page
Skype, where the Windows 7 x64 user faced a similar problem in the fifth version of the program. But the solutions proposed by the support team does not help me. In addition, I found the advice to disable enhancements in the properties of the playback device,
but it is impossible for the "Remote Audio" device.
At the moment, on servers where I updated the Skype, I disabled the audio service. If within a reasonable time, I do not find a solution, I will have to revert
to an older version of Skype, but I would like to solve the problem completely.

Enable the Allow audio and video playback redirection Group Policy setting
To allow audio and video playback when connecting to a computer running Windows Server 2008 R2, you must enable the Allow audio and video playback redirection Group Policy setting. The Allow audio and video playback redirection Group Policy setting is located
in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection and can be configured by using either Local Group Policy Editor or the Group Policy Management
Console (GPMC).
For more information about Group Policy settings for Remote Desktop Services, see the Remote Desktop Services Technical Reference (http://go.microsoft.com/fwlink/?LinkId=138134).
Is this policy applied? Refer:
http://technet.microsoft.com/en-us/library/dd759165.aspx
Also, have you tried update the audio device driver for this terminal server?

I have OS X 10.8.5 and try access to Windows Server 2008R2

I have OS X 10.8.5 and try access to Windows Server 2008R2. Can help me with the steps to do it. Actually at connect show the message "Error de conexion compruebe que gestion remota en el panel compartir de preferencias del sistema esté activado en el ordenador al que intenta conectarse. Compruebe tambien que su conexcion de red funciona correctamente.
I can connect to Windows Server 2008r2 with other programs like 2X or Cord but can't copy o move files, for these reasons I'd buy Apple Remote Desktop but had the problem of conection.
Thanks for your answer.
JLC

JLC - have you tried http://www.microsoft.com/mac/remote-desktop-client ? I have been using this and CORD for quite some time with success. As long as you configure to allow access to local filesystem, you can transfer filtes to/from the Windows server you are connecting to.
EDIT: actual download page for client is:
http://www.microsoft.com/en-us/download/details.aspx?id=18140
One thing to note though, since I updated my MBP to 10.8.5, copy/paste of text has not worked for me with either of those RDP clients.

Does ms office 2010 support in windows server 2008r2

Hi
I required the information regarding that does ms office 2010 support in windows server 2008r2 edition & if support then how can i down load the office service pack for the same.

Yes, you can install Office 2010 on Windows Server 2008 R2 and Windows Server 2008 R2 Service Pack 1 (SP1). For the system requirements for Office 2010, please refer to this article:
http://technet.microsoft.com/en-us/library/ee624351(v=office.14).aspx
Microsoft now no longer offers a download from their site, however, if you already have a product key of Office 2010, you can get Office 2010 installation package from this website:
http://office.microsoft.com/en-us/products/microsoft-office-2010-backup-FX101853122.aspx . If you don’t have a product key, I would suggest you to try the new Office – Office 2013, which also can be installed on Windows Server 2008 R2.
For more information about the new Office, please check on this site:
http://office.microsoft.com/en-us/
Thanks,
Ethan Hua CHN
TechNet Community Support

Setup test envrionment for windows server 2008r2 cluster + oracle failsafe

Hi All,
Would like to set up windows server 2008r2 cluster + oracle failsafe for testing purpose.
Am new to this. I have a windows 7 desktop machine.
Can i acheive it using virtual box or?
Need your advise here.
thanks!

dbaing wrote:
Hi All,
Would like to set up windows server 2008r2 cluster + oracle failsafe for testing purpose.
Am new to this. I have a windows 7 desktop machine.
Can i acheive it using virtual box or?
Need your advise here.
thanks!http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-oel5-using-virtualbox.php

Unable to install MS Office 2010 in Windows server 2008R2

I am trying to install MS Office 2010 in windows server 2008R2. Office installed and then immediately it rollback and installation end up with an error "microsoft office professional plus 2010 encountered an error during setup ".I tried many
things on searching net but nothing works.

Hi,
In addition to Don's post, you can refer to this kb below:
How to use a setup log to troubleshoot setup problems in Office
http://support.microsoft.com/kb/826511/en-us
I also suggest you perform the install in Windows Clean Boot mode:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

The server encounter an error while attaching Virtual Hard Disk in Windows Server 2008R2

Unable to add an existing virtual hard disk in new VM(windows server 2008r2).

Please repost here:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
And include the actual and full error message.

Installation of windows server 2008r2 on dell power edge 2850

Similar Messages

Maybe you are looking for