Installation of windows server uninformed at retail.

I purchased an Asus G75VX i7 64bit notebook computer last year that had windows 8 64 bit installed but it had server software also installed. There was no notification of windows server being installed and it was mask installation. You would have to know
about computer configuration to recognize the installation. No company would admit that I had a weird installation purchased at retail even though I furnished Asus the computer two times to the Service center with it being returned two times with the same
configuration. I furnished the registry to Asus and Microsoft and the computer Registry in win8 64 bit is 270MB and I stop counting pages in text at over 5000 pages. I purchased windows 7 home premium and on install it was configured the same way except the
Registry was a little over 130MB and about 1400 pages. Who do I speak with at Microsoft about my situation or Asus?

I am legally disable and I am a pro se litigator that has since 2007 self litigated in three civil actions in the United States Federal Courts with one all the way to the United States Supreme Court with all of my personal communication devices being illegally
publicly hacked and my information being public shared.
Telecommunications Access for People with Disabilities
The FCC has rules requiring telecommunications equipment manufacturers and service providers to make their products and services accessible to people with disabilities, if such access is readily achievable.  These rules implement Section 255 of the
Communications Act.  Where access is not readily achievable, Section 255 requires manufacturers and service providers to make their devices and services compatible with peripheral devices and specialized customer premises equipment that are commonly used
by people with disabilities, if such compatibility is readily achievable.  The FCC has determined that interconnected Voice over Internet Protocol (VoIP) providers must comply with Section 255. http://www.fcc.gov/guides/telecommunications-access-people-disabilities 
28 U.S.C.
United States Code, 2011 Edition
Title 28 - JUDICIARY AND JUDICIAL PROCEDURE
PART V - PROCEDURE
CHAPTER 111 - GENERAL PROVISIONS
Sec. 1654 - Appearance personally or by counsel
From the U.S. Government Printing Office,
www.gpo.gov
§1654. Appearance personally or by counsel
In all courts of the United States the parties may plead and conduct their own cases personally or by counsel as, by the rules of such courts, respectively, are permitted to manage and conduct causes therein.
(June 25, 1948, ch. 646, 62 Stat. 944; May 24, 1949, ch. 139, §91, 63 Stat. 103.) http://www.gpo.gov/fdsys/pkg/USCODE-2011-title28/html/USCODE-2011-title28-partV-chap111-sec1654.htm 

Similar Messages

  • Upgrading Windows Server 2012 Essential Eval to Windows Server 2012 R2 Retail

    I need to upgrade from Windows Server 2012 Essential Eval version to Windows Server 2012 R2 Retail.  What would be the easiest way to upgrade if license $$ is not an issue? The Server is a DC.  Would the following works:
    1. Upgrade from Windows Server 2012 Essential Eval to Windows Server 2012 Essential Retail
    2. Do a conversion from Windows Server 2012 Essential Retail to Windows Server 2012 Standard Retail (I suppose this just require several command line to enable the 2012 Standard)
    3. Do an in-place upgrade from Windows Server 2012 Standard to Windows Server 2012 R2 Standard (there is no need to do migration, am I right?)
    Thanks.

    I just did a simulation using Hyper V.  It seems that I'm able to do the upgrade sequence as described but I'm not sure whether there are any side effect that not yet surface out.  Here is the details steps that I took:
    1. Under Windows Server 2012 Essential Eval
    convert the Windows Server Essential 2012 Eval to Windows Server Standard 2012 using the following command in an elevated command prompot
    dism /online /set-edition:ServerStandard /productkey:xxxxx-xxxxx-xxxxx-xxxxx-xxxxx /accepteula
    press "y" and return to restart as prompted
    the productkey could be retail key or the KMS client keys (just for installation not for activiation)
    2. After reboot, the system become Windows Server 2012 Standard
    using admin account to login
    add admin account to the Enterprise Admins group and Schema Admins group if not already done so, logout and login again
    mount the Windows Server 2012 R2 Standard disk in, say, drive d:
    in an elevated command prompt, go the following:
    cd d:\support\adprep
    .\adprep.exe /forestprep
    .\adprep.exe /domainprep
    double click on d: in explore to run the Windows Server 2012 R2 Standard setup
    follow the instruction to complete the in-place upgrade from Windos Server 2012 to Windows Server 2012 R2
    3. After reboot into Windows Server 2012 R2 Standard, go to the charms bar, select setting -> server info, it will mention the server is not activated, click on Activate Windows and key in the Windows Server 2012 R2 Standard retail key

  • 64 bit Weblogic Server 10.3.2 installation on Windows Server 2008 R2 x64 ?

    Hi,
    I'm trying to install 64 bit version of Weblogic Server 10.3.2 on my 64 bit OS Windows Server 2008 R2 SP2.
    Firstly I downloaded "jdk-6u24-windows-x64.exe" and installed it on my 64 bit platform.
    I downloaded "wls1032_generic.jar" and try to install it by the command below
    "java -d64 -jar wls1032_generic.jar"
    however I got the message below
    Unrecognized option: -d64
    Couldn't create the Java virtual machine
    Any options about this problem. Where am I making mistake?

    Hi,
    You need to make sure the following things :
    1). If you want to run your WLS on W 64 bit mode then You need to use Generic Jar installer Example: *"java -jar wls1032_generic.jar"*
    2). The above Jar should be installed only using a 64 Bit JVM so that all the 64 bit libraries will be available with the WebLogic while installing it. So first of all Download a 64 Bit JVM in your Woindows box.
    Then just run the following command to check if the JVM is 6t4 bit or not:
    set JAVA=HOME=C:\My64BitJDK\jdk1.6.0_21
    *$JAVA_HOME\bin\java -version*
    3). Now u can run your WebLogic Installer like following:
    *$JAVA_HOME\bin\java -jar wls1032_generic.jar*

  • Problems LMS-4.2 Installation on Windows Server 2008 R2 Enterprise SP1

    Hi all,
    During the installation of the LMS-4.2,
    It passed the "Initializing" and "Copying" stages,
    but, in the "Configuring", it never finishes,
    Anyone had have a similar problem?
    the installer is for - LMS-4.2 and the OS is Windows Server 2008 R2 Enterprise SP1

    Thanks for the update. Glad to know it has installed now.
    There can be some port clashes and resource scarcity when other applications may be using it. Hence we recommend to have majorly LMS as the primary software on the server's.
    Also, LMS is not supported in other languages installers or setups except English and Japanese.
    There are a couple more things you can do/check prior to running the installation.
    LMS generally need Naming convention to handle long names/path etc. By default C: has 8.3 Naming convention enabled. However if you installed on different drive (for eg E:), for which this may be disabled.
    To check naming convention you can run the following command from Windows Command prompt: 
                                       cmd>fsutil.exe 8dot3name query <Drive>
    Example:
    C:\Users\winlau>fsutil 8dot3name query C:
    The volume state for Disable8dot3 is 0 (8dot3 name creation is enabled).
    The registry state of NtfsDisable8dot3NameCreation is 2, the default (Volume level setting).
    Based on the above two settings, 8dot3 name creation is enabled on C:.
    8dot3 needs to be enabled for all drives LMS will potentially use, including:
    Drive where TEMP/TMP is located
    The drive LMS is installed to
    The drive LMS backs up to
    Drive used for a relocated RME Shadow directory or other nonstandard paths written to.
    In some cases, altering the TEMP and TMP variables to be a short path (eg C:/temp or C:/tmp) may avoid the issue, but not always.
    Hence, to be safe, it is best to enable 8dot3name creation globally, either via the registry or Windows CLI
    Sample command to enable globally:
      "fsutil 8dot3name set 0"     
    Sample command to enable on one volume:
      "fsutil 8dot3name set X: 0"  
    Note that this needs a reboot to take effect.  You should not disable 8dot3name creation which already has it enabled, especially the system volume (usually C:). 
    For further information  http://technet.microsoft.com/en-us/library/cc778996%28v=ws.10%29.aspx
    -Thanks
    Vinod
    **Encourage Contributors. RATE them**

  • Cisco LMS 4.1 Installation on Windows Server 2008 R2, Databases not created

    Hi There,
    As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:
    DCRServer is down or may not be completely up. Check if the DCRServer process is running.
    And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases. Attached is the installation log file, if someone could help me with it would be appreciated. Please note the following:
    1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
    2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
    Thanks,

    Also Here is more info output:
    C:\Program Files (x86)\CSCOpx>pdshow -brief
      Process               State                                     Pid
      Tomcat                Program started - No mgt msgs received    1572
      TomcatMonitor         Running normally                          2236
      Apache                Program started - No mgt msgs received    2436
      DataPurge             Administrator has shut down this server   0
      DCRServer             Failed to run                             0
      CMFOGSServer          Administrator has shut down this server   0
      EssentialsDM          Administrator has shut down this server   0
      ConfigMgmtServer      Never started                             0
      ConfigUtilityService  Never started                             0
      CTMJrmServer          Administrator has shut down this server   0
      ChangeAudit           Never started                             0
      SyslogAnalyzer        Program started - No mgt msgs received    2976
      ICServer              Running normally                          5096
      EnergyWise            Never started                             0
      PMCOGSServer          Administrator has shut down this server   0
      IPMOGSServer          Administrator has shut down this server   0
      IPMProcess            Never started                             0
      TISServer             Program started - No mgt msgs received    2544
      DFMOGSServer          Program started - No mgt msgs received    876
      InventoryCollector    Running normally                          3052
      Interactor            Program started - No mgt msgs received    5136
      InventoryCollector1   Program started - No mgt msgs received    5144
      Interactor1           Program started - No mgt msgs received    5308
      PTMServer             Program started - No mgt msgs received    5320
      UPMProcess            Never started                             0
      TISDiscoveryJobCreate Administrator has shut down this server   0
      SyslogCollector       Running normally                          5340
      Proxy                 Program started - No mgt msgs received    5348
      PMServer              Running normally                          5360
      NameServer            Program started - No mgt msgs received    5680
      NameServiceMonitor    Running normally                          5876
      LicenseServer         Program started - No mgt msgs received    5884
      FHPurgeTask           Never started                             0
      EventFramework        Program started - No mgt msgs received    5892
      EPMServer             Program started - No mgt msgs received    5904
      FHServer              Administrator has shut down this server   0
      NOSServer             Program started - No mgt msgs received    5580
      diskWatcher           Running normally                          5640
      DFMMultiProcLogger    Program started - No mgt msgs received    5864
      DFMLogServer          Program started - No mgt msgs received    4896
      DFMCTMStartup         Administrator has shut down this server   0
      DfmBroker             Running normally                          6104
      DfmServer             Running normally                          6416
      DfmServer1            Running normally                          6424
      DCRDevicePoll         Never started                             0
      CSRegistryServer      Running normally                          6432
      CSDiscovery           Never started                             0
      AdapterServer1        Program started - No mgt msgs received    6440
      AdapterServer         Program started - No mgt msgs received    6448
    C:\Program Files (x86)\CSCOpx>pdshow DCRServer
            Process= DCRServer
            State  = Failed to run
            Pid    = 0
            RC     = -3
            Signo  = 1073741821
            Start  = N/A
            Stop   = 07/02/2012 17:39:06
            Core   = Not applicable
            Info   = Application failed or was registered incorrectly.
    C:\Program Files (x86)\CSCOpx>net stop crmdmgtd
    The Cisco Prime Daemon Manager service is stopping..........................................
    The Cisco Prime Daemon Manager service was stopped successfully.
    C:\Program Files (x86)\CSCOpx>bin\perl.exe objects\db\conf\configureDb.pl action=validate dsn=cmf
    INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK locked for the operation...
    ERROR: [StandardDbUpgrade] : Database cmf is not installed.
    INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
    C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbpasswd.pl all
    ERROR: There is no database available to change password.
    C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=pwd
    'cmf' is not a valid data source for the product.

  • OBI11g installation on Windows Server 2008 R2 (64bit)

    Hi,
    Sorry to pick up this topic again, but my research in the forum and other inet sites doesn't help me so far and my installation will not work.
    My Situation:
    I have a Windows Server 2008 R2 (64bit) default installlation. The server (HyperV-managed) has 4 GB RAM.
    I added a Loopback adaptor and set for the loopbackadapter a fixed IP (10.10.10.10 Subnet: 255.255.255.0).
    Entered in the host file (127.0.0.1 localhost and 10.10.10.10 servername)
    Installed JDK 64bit
    Installed Oracle Client 32bit
    Then I tried all three options:
    1) Default OBIEE Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
    2) Enterprise Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
    3) Manually installed WebLogic 1033 --> SoftwareOnly installation of OBIEE --> manually start config of OBI Installation --> same result as above!
    Perhaps you have some hints for me.
    Cheers
    Wolfgang

    Not in the slightest - I installed five just the other week
    All our virtual machines, running 2008 R2 x64. We went for Enterprise Edition, but I believe in CF9 they're both 64-bit anyway. These are the from the build notes I built up:
      Install extra roles:
        Application Server
        Web Server (IIS)
          Application Development
          IIS6 METABASE Compatibility
      Install extra Features:
        SMTP Service
    Other than that nothing else needs doing. It's worth noting (as a slight but irritating aside) that in 2008 R2 the SMTP service is set to Manual not Automatic, so you'll want to change that unless you want your emails to stop every time you reboot the box.
    But the actual install itself was far simpler than CF8 on 2008.
    O.

  • FEP 2010 installation on Windows server 2012

    Hi all,
    Is there any step- by step guide to install FEP 2010 on windows server 2012 R2?
    We need to have this in place till the time, we get our FEP upgraded.
    Regards

    Hi,
    It seems that you can only follow the official document to install FEP on Windows server 2012 R2.
    Please verify that your environment meets the prerequisites before installation.
    http://technet.microsoft.com/en-us/library/gg412482.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error during ECC 6.0 installation on Windows Server OS

    Hello Experts,
    I am having trouble installaint ECC 6.0 on windows server 2008 with MS SQL. I was half way through the installation and encountered an error. Hence i am trying a fresh installation however I get an error message " Cannot determine parameter SAPGLOBALHOST from default profile " . I have deleted registry entries for the previous installations, yet I am unable to proceed. Please help . Have cheked the forum bue haven found any inputs other than http://forums.sdn.sap.com/thread.jspa?threadID=1040931. This has not been of much help.

    Hi Venkata,
    Default profile.........
    SAPDBHOST = BR0137
    dbms/type = mss
    dbs/mss/server = BR0137
    dbs/mss/dbname = ERP
    dbs/mss/schema = erp
    j2ee/dbtype = mss
    j2ee/dbhost = BR0137
    j2ee/dbname = ERP
    SAPSYSTEMNAME = ERP
    SAPGLOBALHOST = BR0137
    rdisp/bufrefmode = sendoff,exeauto
    SAP Message Server for ABAP
    rdisp/mshost = br0137
    rdisp/msserv = sapmsERP
    rdisp/msserv_internal = 3903
    SAP Central Service Instance for J2EE
    j2ee/scs/host = br0137
    j2ee/scs/system = 02
    j2ee/ms/port = 3902
    SAP Message Server for ABAP
    SAP Central Service Instance for J2EE
    SAP Message Server for ABAP
    SAP Central Service Instance for J2EE
    SAP Message Server for ABAP
    SAP Central Service Instance for J2EE
    login/system_client = 001

  • Installation - X11 window server error

    Hello All,
    I've been trying to install Oracle Database 10g R2 on a RHEL 4 X86_64 machine (local machine). I've installed all the necessary packages.I'm having trouble setting the Display Environment variable. I'm installing the Database as Oracle User. When I run the Installer I get the following error.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2006-11-09_02 -59-52PM. Please wait ...[oracle@server ~]$ Xlib: connection to ":0.0" refused b y server
    Xlib: No protocol specified
    Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
    at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
    at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Unknown Source)
    at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Sour ce)
    at java.awt.Window.init(Unknown Source)
    at java.awt.Window.<init>(Unknown Source)
    at java.awt.Frame.<init>(Unknown Source)
    at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
    at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInsta ller.java:378)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstall er.java:2091)
    I'm able to guess that it has something to do with the Display Environment variable setting.
    my hostname is server.example.com
    IP is 192.168.0.155
    in my bash shell file bash_profile I tried giving the following entries
    1)DISPLAY=192.168.0.155:0.0
    export DISPLAY
    2)DISPLAY=server.example.com
    export DISPLAY
    Then I ran the shell script..which produced no errors...
    when again when I try to install I get the error as
    Can't connect to X11 window server using '192.168.0.155:0.0' as the value of the DISPLAY variable.
    I even tried xhost server.example.com...since I was only installing in the local machine and not on a remote machine.
    Please Help me out on this
    Regards,
    Arun.v

    Which user has opened the X session?
    Are you logged as root and then did you "su - oracle" or are you logged as oracle directly?
    If the first option is true then execute "xhost +" before execution of "su - oracle". Then as oracle use export DISPLAY=:0.0

  • Crystal Reports Server 2008 V1 installation on Windows Server 2008

    Hello,
    I am trying to install CRS2008V1 on Windows Server 2008 x64 with SQL Server 2008 and IIS 7.0. Installation wizard says that installation is finished succesfull but I cannot access CMC Console and InfoView. Is there anything which shuld be done more? CRS2008 installation on Windows 2003 was trouble free. I'm very confused now... Anyone can help me?
    Regards,
    Seb.

    I had similar issues.  My resolution was...
    - In IIS Manager, create a new Application Pool called "Classic .NET AppPool"
    - For that app pool, set the managed pipeline mode to "Classic"
    - with that new app pool selected, click on View Applications in the right-hand panel
    - make sure that you see all of the Business Objects applications listed, if not...
         - click the Remove Filter link in the top panel
         - open each Business Objects related application and assign it to the new app pool
    You may need to do an iisreset at that point, but that cleared up the issue for me.

  • Prerequisite checking issue during obiee 11g installation in windows server 2012

    HI..
    Currently i'm facing problem while installing obiee 11g(11.1.1.7.0) in windows server 2012 and the database we're using is ms sql server 10.3 version. During the prerequisite checks while installation it shows the error "Checking Operating system certification" status "failed"..
    can someone provide help to solve this issue..
    Thanks,

    HI..
    Currently i'm facing problem while installing obiee 11g(11.1.1.7.0) in windows server 2012 and the database we're using is ms sql server 10.3 version. During the prerequisite checks while installation it shows the error "Checking Operating system certification" status "failed"..
    can someone provide help to solve this issue..
    Thanks,

  • BPC Installation on Windows Server 2008

    Does anyone know if SAP BPC version 7.0 can be installed on windows server 2008?

    Hi Harry,
    The installation of BPC on the Microsoft platform is tricky enough that for any business-related purpose, you should rely on the guidance of the specialists who do installations.  They will tell you that right now the Windows Server 2003 platform is really the only way to go, and as someone who has worked on these, I can tell you that it is crucial to reduce the number of new platform choices and/or chances for bugs/glitches/changes.
    To learn more about the process, you should go to the Technical Installation class, which used to be RABPC7 on the 5.1 version.  It might still be the same course number. 
    If you'd like a taste of all of the parts of the process involved, there is a document on the SDN called "How to Perform a Dual-Server BPC for Microsoft Install".  It doesn't cover everything, but it will give you a flavor for the process.
    In any case, I would strongly recommend that you don't even look at Win2K8 until they update BPC with it.
    Sidenote:  SQL 2008 is supported as of 7.0 SP3, I think and we've been using it on a DEV environment without any issues so far.

  • Cold fusion 9 Installation on Windows server 2008 (IIS 7.0) - IIS websites not working ?

    I am having a 64 bit machine on which windows server 2008 R2 is installed. IIS 7.0 is configured and running on it. on which I have my organisations main website. I have to install Cold fusion on this machine as some of my site pages are designed with CF.
    I used all the default settings for installing cold fusion 9. It got completed succefully. But after I restarted my system and tried accesing my ASP.net website it was not loading the page. Text getting displayed was only as follows '<script> src="'. Later I unsistalled CF and my site was working fine.
    Please can any one guide me to successfully install Cold fusion without disturbing my main site deployed on IIS ?

    Sarfarajms, I don't recognize what about the CF install would conflict with ASP.NET, but I'll note this:
    If you downloaded CF 9 recently, you are still running 9.0--which does NOT formally support IIS 7. If you followed the steps about enabling IIS 6 compatibility and such (in the install guide or some blog entry), perhaps that caused the conflict.
    Instead, you will want to install 9.0.1 (CF 9 Updater 1, which is NOT provided in the current 9.0 install). THAT is the first release to formally support IIS 7. And if you read the updater installation guide (http://www.adobe.com/support/documentation/en/coldfusion/901/cf901install.pdf), it discusses how to deal with the upgrade depending on what you had done with respect to IIS, starting at the bottom of its page 8.
    Hope that helps.
    /charlie

  • My 10.9.0.1 internal mac was ruined after the installation of Windows Server 2012 on boot camp

    Hi Everyone. I've been trying to install Windows Server 2012 on my boot camp. Well, soon after the 2012 was installed, my mac os 10.9.0.1 was ruined. When I pressed on the option key while the imac was booting, I can see the icon of "10.9.0.1 recovery". But after I chose it, the apple tried very hard to boot it up with a progress bar below the apple icon. The computer shut down itself after the progress bar reached the end. I've tried boot it up with the installation CD and tried to repair the Macintosh HD in Disk Uitilites but no use. It was said the hard drive cannot be repaired and better be reformat. Currently I can only boot up my mac from my SuperDuper external clone drive. Anyone could give me wise advices to fix this problem please?

    The "wise advices" I can offer are:
    Read the Boot Camp documentation before trying to reinstall Windows Server. Windows Server is not supported by Boot Camp
    Erase and reformat your hard drive. Reinstall OSx then restore your data from your backup.
    Use a virtual machine like Parallels, Fusion, or VirtualBox to install Windows Server

  • Oracle Dev-suite 10g installation on WINDOWS server 2008 R2

    Hi Friends,
    Is it possible to install Oracle Dev-suite 10g on WINDOWS server 2008 R2.Any idea on this,can you please share.
    Best regards,
    Rafi.

    Hi John,
    Is it possible to do this by applying any patches or alternate option.
    Best regards,
    Rafi.

Maybe you are looking for

  • Data from SAP into BPC

    What is the best way to get data from SAP into BPC?What about getting data from BPC (like a template) into back into SAP?

  • Change page content

    Hi, If I've updated the page content, do I have to publish the site again for it to be updated?

  • White background and no artwork size slider: what a bad descision. Bring it back, Apple!

    Apple, iTunes used to be intuitive, unique and beautiful. Why can I not change the size of my artworks anymore, to see all of my covers if I want to? And how can you offer artwork on white background? So awful. It makes the user stop feeling like usi

  • Participant.fetch() method in OBPM 10g

    Hi all, I am using OBPM 10.3.3 and using the following code to fetch the details of participants DirHumanParticipant.fetch() Does this directly validate the user against LDAP or DIrectory database? if the user is not there in LDAP but in directory (w

  • Just installed Oki MC362w everything prints but Photoshop elements 9

    Anyone have this issue or have a fix since Adoble won't help. Just installed a new OKI Multi function printer, only installed the printer driver downloaded from their website. Everything else prints except PSE9. it doesn't even register a printer. BT