Installation of ZFD inventory services
We have been using ZFD 3.0 SP1a for quite some time but we
haven't installed Inventory Services so far, which we'd like to do now.
How can we install Inventory Services in addition? (It's not a
re-installation but we want to do it for the first time.)
Is it enough to rerun ZFD 3.0 SP1a and select all the components
including Sybase or do I have to go back to the basic installation of
ZFD 3.0 and then install the support pack afterwards again?
Is there any danger of corrupting our present configuration?
We are running Netware 5.1 SP6.
Thanks in advance for your help,
Gerhard
Gerhard,
besides that Zen 3.0 and NW 5.0 is no longer supported there is no
danger :)
Just rerun the setup and choose all components for inventory including
the sybase option. Afterwards re-apply SP1a.
Regards, Kai Reichert
Novell Support Forums Sysop
C makes it easy to shoot yourself in the foot. C++ makes it harder, but
when you do, it blows away your whole leg. - Bjarne 'Stumpy' Stroustrup
Similar Messages
-
Inventory Services does not start up
ZFD3.2 installed on "ZFD" resource in a 2-node NW6SP2 Cluster (SOU-SRV3 and
SOU-SRV4)
I have just installed ZFD3.2 with NCS. When I try to start the Inventory
Service I get the following error message briefly displayed on the Server
Console Screen:
Could not initialize status logger: Error in initialzing the nds
I have noted that I have two Zen Inventory Service Objects:
SOU-SRV3_ZenInvService & SOU-SRV4_ZenInvService.
I would have thought that during the install I would have an inventory
service object that represented the virtual server object. ie:
SOU-CLUSTER1_ZFD_SERVER_ZenInvService). It is this virtual server object
that I have configured as the Inventory Service DN in the Config.Properties
file.
Have I made an error during the install or do I just need to modify the
Config.Properties file?
Any help would be appreciated as I really want to get this working as a
Cluster Resource.
Thanks in advance
AliAli,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Inventory service will not start
We recently had a drive crash in our array and had some data errors. We've
got the new drive in and everything seems to be running except for the
Inventory service. I can load the mgmtdbs and it loads, but when I run the
Startinv, I get
java: Class
com.novell.zenworks.desktop.inventory.servercommon .ZenworksInventory
ServiceManager exited with status 1.
I was about to upgrade to IR7 before the drive crashed, so I went ahead an
applied it, figured maybe it would overwrite a corrupt file maybe, but
still getting the same error. I found a tid explaing how to turn on
detailed logging, but it seems it doesn't get far enough to start logging.
I've seen a bunch of posts with this problem, but most are Zenworks 3
related and mention
java: Class com.novell.orb.service.naming.NamingServer exited with status 1
Does this relate to Zenworks 4.01? It's not loaded though. When I do a
java -show, I get
org.apache.tomcat.startup.Main ID 218
com.novell.zenworks.desktop.remotewakeup.zenworksw olservicem ID 460
com.novell.application.zenworks.autowsmanagement.w simport.im ID 466
com.novell.application.zenworks.autowsmanagement.w sremoval.r ID 470
We're running Netware 6.0 sp 5, java 1.3.1_10, ZFD 4.01 IR7.
Any help is appreciated, ThanksOk, I was finally able to get a screenshot of the screen that pops up when
I run startinv.
starting inventory services. please wait...
exception in thread "main" java.lang.nullpointerexception
at com.novell.zenworks.desktop.inventory.servercommon .zenworksinventorys
servicemanager.main(zenworksinventoryservicemanage r.java:275) -
Inventory services not started
Hi,
I've installed Zfd 4.01 with IR 6 in a w2000 server and starting inventory
services the following errors occurs:
Iniciando Servios de Inventrio. Aguarde...
java.lang.IllegalArgumentException: unknown format type at
at java.text.MessageFormat.makeFormat(MessageFormat.j ava:898)
at java.text.MessageFormat.applyPattern(MessageFormat .java:318)
at java.text.MessageFormat.<init>(MessageFormat.java: 248)
at java.text.MessageFormat.format(MessageFormat.java: 475)
at
com.novell.zenworks.desktop.inventory.common.Inven toryServiceErrorLogger.lo
gErrorAndExit(InventoryServiceErrorLogger.java:79)
at
com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventoryService
Manager.main(ZENWorksInventoryServiceManager.java: 392)
Exception in thread "main"
Somebody knows as to decide?
Tks.
Leila.Leila,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Error loading Inventory Service
Just completed several installs of Zen for Desktops 6.5 SP2. No problems
except for one server that will not load the Inventory service. Tried
renaming the Zenworks folders and reinstalling, deleting the objects and
reinstalling, etc... Found the following TID:
http://support.novell.com/cgi-bin/se...i?10098429.htm which
describes a situation where the security folder is not created in <ZENworks
install volume>ZENworks/zws. The fix is supposed to be just creating a
security folder and copying a zws.properties file from a working server.
This does not work. I looked at one of my functioning servers and there are
2 files: .keystore and keypair.dat located in the working servers security
folder.
How do I generate a new .keystore and new keypair.dat files? Is there
something similar to tckeygen.ncf I can use to recreate these files?
Many thanks
JeffJisaacs,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Inventory service will not load
I tried posting earlier on the install forum but have no reply so I'm
trying here...
Just completed several installs of Zen for Desktops 6.5 SP2 on Netware 6.5
SP5. No problems except for one server that will not load the Inventory
service. Tried renaming the Zenworks folders and reinstalling, deleting the
objects and reinstalling, etc... Found the following TID:
http://support.novell.com/cgi-bin/se...i?10098429.htm which
describes a situation where the security folder is not created in
ZENworks/zws. The fix is supposed to be just creating a security folder and
copying a zws.properties file from a working server. This does not work. I
looked at one of my functioning servers and there are 2 files: .keystore
and keypair.dat located in the working servers security folder.
How do I generate new .keystore and new keypair.dat files? Is there
something similar to tckeygen.ncf I can use to recreate these files?
Many thanks
Jeff[email protected],
What os is the server?
what error do you get when trying to start inventory?
Jared Jennings - Data Technique, Inc.
Novell Support Forums Sysop
My Blog and Wiki with Tips, Tricks, and Tutorials
http://jaredjennings.org -
Inventory service does not start 610 failed login
L.S.
Netware 6.5, SP6
ZEN 7.01SP1IR1
Sybase database
Standalone server
My inventory service does not start. I've looked around but did not yet find the solution. I did have an error I've read nothing about:
logger screen: java:Class com.novell.....ZENWorksInventoryservicemanager exited with status -1
C1, Inventory service object shows 610: database location policy is not configured (but it is)
NRM: health, failed login: user: .CN=Server package_ZENSERVER:Netware:ZENDateBase.O=context.T= tree
Any suggestions
Thomas RoesThomasroes,
either of these help?
http://www.novell.com/support/php/se...1%200%20506894
http://www.novell.com/support/php/se...1%200%20506894
Shaun Pond -
Unable to read the Inventory Service Object
Hi,
I got the error message when I startinv.
Errpr code: 603. Unable to read the Inventory Service Object in Novell
eDirectory.
Any one know how to fix it.
ThanksMail,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Installation of Essbase, Shared services and Planning
Hi,
I am using Essbase (64 Bit), Shared server and Planning +mandatory component of hyperion:
Can i install 32 bit applications Planning, Shared services, Analytic Provider on 64 bit OS (windows 2003 EE)
Regards
KumarCross post :- Installation of Essbase, Shared services and Planning
Cheers
John
http://john-goodwin.blogspot.com/ -
Java page fault with inventory service
Hi
Having an issue with java and the inventory service. Shortly after
lunching I get the following error:
java: Page fault processor exception occurred while executing class
com.novell.z
enworks.desktop.inventory.servercommon.ZENWorksInv entoryServiceManager
State of Registers at Processor Exception:
EIP=8DDC4A7C, EFLAGS=10212, EAX=0, ECX=D9917A08, EDX=50,
EBX=7070A86C, ESP=7070A834, EBP=7070A834, ESI=7070A87C, EDI=D9917A08,
The exception occurred while executing code in: JVM.NLM (8dbbe000)
The exception occurred while running thread: Java_1845 XMLTime (A63980E0)
java: Class
com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory
ServiceManager exited with status -5
I have not been able to track down a tid.
Thanks,
WillSorry forgot the specs:
Zen sp1 ir3a hp2
netWare 6.5 sp6.
Java Version 1.42.07
Will K wrote:
> Hi
>
> Having an issue with java and the inventory service. Shortly after
> lunching I get the following error:
>
> -------------------------------------------------------------------------------
>
> java: Page fault processor exception occurred while executing class
> com.novell.z
> enworks.desktop.inventory.servercommon.ZENWorksInv entoryServiceManager
>
> State of Registers at Processor Exception:
> EIP=8DDC4A7C, EFLAGS=10212, EAX=0, ECX=D9917A08, EDX=50,
> EBX=7070A86C, ESP=7070A834, EBP=7070A834, ESI=7070A87C, EDI=D9917A08,
>
> The exception occurred while executing code in: JVM.NLM (8dbbe000)
> The exception occurred while running thread: Java_1845 XMLTime (A63980E0)
> -------------------------------------------------------------------------------
>
> java: Class
> com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory
> ServiceManager exited with status -5
>
> I have not been able to track down a tid.
>
> Thanks,
>
> Will -
603: Unable to read the Inventory Service Object in Novell eDirectory
I receive this error when starting the inventory service on a NetWare 6.0
server. Any ideas?aha, thanks for the feedback! That's in the docs: this is for zen7, but the same is for 6.5 http://www.novell.com/documentation/...a/a42r1l6.html
Shaun Pond -
Device Stuck in "All Learning Devices in Inventory Services"
LMS Version 4.2.5
one 6509 stuck in "All Learning Devices in Inventory Services"
*** Data Collector Status Information ***
Discovery Progress = 10% completed
Error Code = N/A
Error Message = N/A
I have remove this device and add again,and also adjust the snmp timeout ,this device still stuck in learning state.
But,this device inventory collection and config archive function is ok.
Is this a bug,or how can I do next?Is it happening just for a single device ?
are all the other devices are in KNown status .
Any firewall between this device and LMS ?
Thanks-
Afroz -
Error in Inventory Service...
I have an error on my ZenWorks Inventory service but I am unsure what I need
to do about it.
The error is:
Trying to connect to Master XML Server
The Novell knowledgebase tells me that I need to run ZWF.NCF before the
StartInv.NCF, but I cannot seem to find it anywhere on the server.
What do I need to do?
Thanks.
Delon E. Weuve
Senior Network Engineer
Office of Auditor of State
State of IowaDelon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
We're running Zenworks 6.5 on a Netware 6.5 SP2 server.
We recently applied the Zenworks 6.5 support pack 2 and since then we've
been unable to start the Inventory service.
When we type StartSer * at the console the error that comes back from the
logger screen is: java: Class
com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory Start
Service exited with status -1.
I've checked the database and it appears to load correctly. The database
runs on the same server as the Inventory service.
I've checked the Status in the inventory service object and the last status
is a 602 error.
I've also checked that the port the service is trying to use isn't in use
and the inventory service objects in C1 and can't see any issues.
Anybody have any ideas?I would chek to make sure that your JAVA search settings are correct on your
server
SYS:\JAVA\BIN
SYS:\JAVA\NWGFX\BIN
SYS:\JAVA\NJCLV2\BIN
should all be in the path.
I have seen these entries as either missing or pointing to the wrong
location as a cause of similar problems.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared either Novell or any rational human.
<[email protected]> wrote in message
news:VpTEh.1580$[email protected]..
> We're running Zenworks 6.5 on a Netware 6.5 SP2 server.
>
> We recently applied the Zenworks 6.5 support pack 2 and since then we've
> been unable to start the Inventory service.
>
> When we type StartSer * at the console the error that comes back from the
> logger screen is: java: Class
> com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory Start
> Service exited with status -1.
>
> I've checked the database and it appears to load correctly. The database
> runs on the same server as the Inventory service.
>
> I've checked the Status in the inventory service object and the last
> status
> is a 602 error.
>
> I've also checked that the port the service is trying to use isn't in use
> and the inventory service objects in C1 and can't see any issues.
>
> Anybody have any ideas?
> -
Middleware Replication-ISU Installation Facts into CRM Service Contract
Hi All,
I would like to share an update which I have followed for one of my implementation project.
Following document will help you, if you want to replicate some of the data from ISU to CRM Service contract custom fields, which is not the standard replication practice.
[Middleware Replication-ISU Installation Facts into CRM Service Contract|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/30e51278-00f0-2d10-89a9-ee3d76447650]
Appreciate your feedback.
Cheers,
SurajHi Fritz,
As requested following are the code samples-
For ISU System BAdI "ECRM_CRM_DOWNLOAD" as below:
X_CONTRACTPOS TYPE ECRM_CRMCONTRACT_DATA_POS Item Data (Enhanced)
XY_CONTRACTPOS TYPE ECRM_CRMCONTRACTPOS Transfer Structure: Contract Status from CRM to IS-U
XY_CONTRACTPOSX TYPE ECRM_CRMCONTRACTPOSX Transfer Structure: Contract Status from CRM to IS-U
TXY_CONTRACTCONF TYPE ECRM_CRMCONTRACTCONF_TAB Configuration Container
TXY_CONTRACT_STATUS_DATES TYPE ECRM_CRMCONTRACT_STATUS_DAT_T Status and Date Tab
METHOD if_ex_ecrm_crm_download~crm_download_fill_data_new.
*...Local data declaration
DATA : l_c_string1 TYPE string1,
ls_contractconf TYPE ecrm_crmcontractconf.
IF x_contractpos-partner IS NOT INITIAL AND
x_contractpos-everh-anlage IS NOT INITIAL.
SELECT SINGLE string1
FROM ettifn
INTO l_c_string1
WHERE anlage = x_contractpos-everh-anlage.
IF sy-subrc EQ 0.
MOVE : x_contractpos-partner TO ls_contractconf-partner,
x_contractpos-everh-contractpos TO ls_contractconf-ref_guid,
'OPERAND' TO ls_contractconf-attr_name,
l_c_string1 TO ls_contractconf-value.
CALL METHOD me->fill_container
EXPORTING
ip_contractconf = ls_contractconf
ip_value = ls_contractconf-value
ip_name = 'Operand'
CHANGING
li_contractconf = txy_contractconf.
ENDIF.
ENDIF.
ENDMETHOD.
VALUE( IP_CONTRACTCONF ) TYPE ECRM_CRMCONTRACTCONF Configuration Container
VALUE( IP_VALUE ) TYPE TEXT70 Error message text - long text of the error
VALUE( IP_NAME ) TYPE CU_CHARC Characteristic Name
VALUE( LI_CONTRACTCONF ) TYPE ECRM_CRMCONTRACTCONF_TAB Configuration Container
METHOD fill_container.
DATA : l_c_contractconf TYPE ecrm_crmcontractconf.
FIELD-SYMBOLS : <contractconf> TYPE ecrm_crmcontractconf.
l_c_contractconf = ip_contractconf.
READ TABLE li_contractconf ASSIGNING <contractconf> WITH KEY ref_guid = ip_contractconf-ref_guid
attr_name = ip_name.
IF sy-subrc EQ 0.
<contractconf>-value = ip_value.
ELSE.
l_c_contractconf-value = ip_value.
l_c_contractconf-attr_name = ip_name.
INSERT l_c_contractconf INTO TABLE li_contractconf.
ENDIF.
ENDMETHOD.
For CRM system BAdI "ECRM_DOWNLOAD" as below:
IP_MTR_TYPE TYPE /NPC/MTRTYPE Meter Type
IP_REF_GUID TYPE CRMT_OBJECT_GUID GUID of a CRM Order Object
CP_CS_TRANS_MSG TYPE BAD_BUS_TRANSN_MESSAGE Transaction Messaging BDoc
METHOD fill_container.
DATA: li_flds_upt_orderadm_i TYPE TABLE OF smog_sfldn.
FIELD-SYMBOLS : <orderadm_i> TYPE bad_orderadm_i_mess.
READ TABLE cp_cs_trans_msg-orderadm_i ASSIGNING <orderadm_i> WITH KEY guid = ip_ref_guid.
IF sy-subrc EQ 0.
APPEND 'ZZ_METER_TYPE' TO li_flds_upt_orderadm_i.
CALL FUNCTION 'SMO_SNDBITS_SETX'
EXPORTING
structurename = 'BAD_ORDERADM_I_MESS'
ddic = 'X'
TABLES
sfields = li_flds_upt_orderadm_i
CHANGING
sndbits = <orderadm_i>-sendbits
EXCEPTIONS
structure_not_found = 1
wrong_fieldname = 2
OTHERS = 3.
<orderadm_i>-zz_meter_type = ip_mtr_type.
ENDIF.
IS_CONTRACT_DATA TYPE ECRM_ISU_CONTRACT_DATA2
CS_BUS_TRANS_MSG TYPE BAD_BUS_TRANSN_MESSAGE Transaction Messaging Business Document
METHOD if_ex_ecrm_download~ecrm_download_fill_data.
DATA : ls_contractconf TYPE ecrm_isu_contractconf2,
ls_orderadm_i TYPE bad_orderadm_i_mess.
LOOP AT is_contract_data-t_contractconf INTO ls_contractconf.
READ TABLE cs_bus_trans_msg-orderadm_i INTO ls_orderadm_i WITH KEY guid = ls_contractconf-ref_guid.
IF sy-subrc EQ 0.
MOVE : ls_contractconf-value TO ls_orderadm_i-zz_meter_type.
CALL METHOD me->fill_container
EXPORTING
ip_mtr_type = ls_orderadm_i-zz_meter_type
ip_ref_guid = ls_orderadm_i-guid
CHANGING
cp_cs_trans_msg = cs_bus_trans_msg.
ENDIF.
ENDLOOP.
ENDMETHOD.
ENDMETHOD.
Cheers,
Suraj
Maybe you are looking for
-
Re: Tecra M2 - Where can I buy new internal speakers?
Hi there, My speakers in the Tecra M2 have blown, basically when I turn the volume up half way it screeches a horrible sound, and I can hear dogs barking in the background!!! Where can I find some new speakers for it? Had a look on ebay but they only
-
Authoring a book made with iBook app cannot be sold anywhere else?
Is it true that books made with the iBook Author app and sold through the iBook store can't be sold anywhere else? If so, I sure hope people in here are aware of that. Just an FYI I found this on http://ca.finance.yahoo.com/news/apple-absolute-worst-
-
After installing lion on macbook mid2010, is very slow
I had installed snow leopard macbook and was very fast, change a lion and has become slow, I delete my HD and reinstall the lion had no improvement, I have 2 months after buying the machine and I repent for not having purchasedbetter macbook pro. hel
-
I completed find call settings or call log settings Missing in BlackBerry 10 Does any one in BlackBerry 10 Os have call settings for received, Dialled and missed call? K G Desai
-
Question on order of actions for slide objects.
Dear friends: I am trying to set up some effects on my presentations but am struggling with one special effect that involves actions. So far I have been able to do most of what I need but the last thing I need is to be able to make two or more action