Installation OIM 9.1.0.1 on AIX 6.1 64 bit

I'm trying to install OIM 9.1.0.2 on Weblogic 10.3.5 on AIX.
Below the hardware description:
Processor: PowerPC/RISC
Bus Architecture: 64 bit
Operating System Name and Version: AIX 6.1
Operating System 64 bit
JDK: IBM JDK 1.6.0 64 bit
Here the steps we were following for installing the target versions of the products:
1. install WLS 10.3
2. install OIM 9.1.0.1
3. upgrade WLS from 10.3 to 10.3.1 or later (10.3.5 in my case)
4. upgrade OIM to 9.1.0.2
5. upgrade OIM to 9.1.0.2bp18
First step was succesfull without any problem but we are stuck in the second one.
We had some problems during the installation.
In the phase called "Finalizing Vital Product Data Registry..." of the ./install_server.sh we had faced with this error:
Oracle Identity Manager Installer has found that Keytool_svr.sh failed.
Do you have any suggestions for figuring out the issue?
Thanks,

Hope this helps:
https://kr.forums.oracle.com/forums/thread.jspa?threadID=464506
OIM 9.0.3.1 installation for OC4J
regards,
GP

Similar Messages

Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!

Hi,
I have installed AIX 5L on 32 bit kernel machine.
Thereafter I have installed Oracle 9.2.0.1 Database!!
But whenever I am running sqlplus or listener it gives me an error that "you cannot run 64 bit application on 32 bit machine"
but I am able to run DBCA or NETCA command from oracle home directory & it runs properly. It also create & configure the listener but due to the above mismatch it could not start!!
Can any one help !!
Regards,
Indraneel

Same thread into Installation Forum : Re: Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!
Nicolas.

Installation of sap ecc6.0 sr3 on Aix with DB2.

Hello Everyone
Pleaese suggest the file system size which is to created before installation of sap ecc6.0 sr3 on Aix with DB2.
Thanks

/usr/sap/trans
/usr/sap/<SID>
/db2/<SID>/sapdata1
/db2/<SID>/sapdata2
/db2/<SID>/sapdata3
/db2/<SID>/sapdata4
/db2/<SID>/log_dir
/db2/<SID>/log"_archive

Oracle 10.2.0.5 om AIX Power series 64 bit

Hi
i need to install oracle Database 10.2.0.5 on AIX Power Series 64 bit.
I have checked on oracle.com but there is only 10.2.0.1 available for my requirement.
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
So what i need to do?? Please direct me to proper docs .
Regards

Hi;
You need to install first 10.2.0.1 setup than you should apply 10.2.0.5 patch.For patch you need metalink account
10.2.0.5 Patch Set - Availability and Known Is [ID 1087991.1 ]
Also see:
Re: Update to 10.2.0.5
For your issue i suggest below steps
1. Use 10.2.0.1 setup and install Oracle software only
2. Use 10.2.0.5 patch and make your level 10.2.0.5
3. Create database with dbca utulity
Also see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Minimum Software Versions and Patches Required to Support Oracle Products on IBM Power Systems [ID 282036.1]
Regard
Helios

Install oracle Database 10.2.0.5 on AIX Power Series 64 bit.

Hi
i need to install oracle Database 10.2.0.5 on AIX Power Series 64 bit.
I have checked on oracle.com but there is only 10.2.0.1 available for my requirement.
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
So what i need to do?? Please direct me to proper docs .
Regards

user7699943 wrote:
Hi
i need to install oracle Database 10.2.0.5 on AIX Power Series 64 bit.
I have checked on oracle.com but there is only 10.2.0.1 available for my requirement.
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
So what i need to do?? Please direct me to proper docs .
Regards
You need to download the 10.2.0.5 patch from MoS
Cheers

AIX 5.1 (64-bit kernel mode) + JVM 1.3.1 (32-bit)?

We need to run Oracle 9.2 and WebLogic 7.0 on the same box running AIX
5.1. Since Oracle 9.2 is only available as a 64-bit app, we need to
run AIX 5.1 in 64-bit kernel mode.
IBM has released both a 32-bit and 64-bit JVM 1.3.1. Clearly, they
will run in the respective kernel modes, however, has anyone tried
running JVM 1.3.1 (32-bit) in AIX 5.1 (64-bit kernel mode)?? If yes,
what version (java -version printout) of JVM 1.3.1 and WebLogic did
you use?
We need to use the 32-bit JVM because WebLogic 7.0 contains some
32-bit libraries (e.g. Oracle JDriver).
Would apprecite any stories regarding success/failure.

I've tried and have not found a sucessful combination. I tried the JDK bundled
with 6.1sp2 as well as 1.3.1.10 and 1.3.1.11
sorry no help,
James
[email protected] (Len) wrote:
We need to run Oracle 9.2 and WebLogic 7.0 on the same box running AIX
5.1. Since Oracle 9.2 is only available as a 64-bit app, we need to
run AIX 5.1 in 64-bit kernel mode.
IBM has released both a 32-bit and 64-bit JVM 1.3.1. Clearly, they
will run in the respective kernel modes, however, has anyone tried
running JVM 1.3.1 (32-bit) in AIX 5.1 (64-bit kernel mode)?? If yes,
what version (java -version printout) of JVM 1.3.1 and WebLogic did
you use?
We need to use the 32-bit JVM because WebLogic 7.0 contains some
32-bit libraries (e.g. Oracle JDriver).
Would apprecite any stories regarding success/failure.

Installation OIM on redhat Linux really slow

Hello,
I have a problem with the installation of OIM. When I try to install OIM on a linux server (redhat 5.0 64b) with the JRockit 64bits java 1.6.0 (jrmc 3.2.1-1.6.0) version the installer is just really slow. It takes ages for the command line installer to go to the next step.
has anyone else experienced this and found a solution?
greetings,
Bas

The machine on which OIM is to be installed has enough memory, I believe it has 8GB..
The weird thing is that the first time we ran the installer, it was just normal (== fast) but the installation failed when deploying OIM into Weblogic and we can't run the weblogic deploy script, since this also fails.. (it throws a nameError: fail on the configoim.py script) That's when we decided to try to install OIM again from scratch.. so we moved the current installation directory to another location and started the installation again. This when the problems as decribed by Bas began.. The installer is really really slow.. we waited for more then 15 minutes for it to continue to the next step.. but it didn't. We checked the machine for spiking processes but the machine was totally idle..
Does anyone know what could be the problem? Are we doing anything wrong? or are we missing something?
Edited by: SteinWelberg on 3-mrt-2010 12:38

OIM 11g installation: oim-config.xml was not found in MDS Repository

Hi,
I just installed Oracle Identity Manager 11g (the latest version) on out test system. The installation worked fine. I can start the admin server as well as the soa_server. But when I start the oim_server1, the deployment of oim fails with the following error message:
####<Aug 18, 2010 3:33:22 PM CEST> <Error> <Deployer> <oim11g> <oim_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1282138402834> <BEA-149205> <Failed to initialize the application 'oim [Version=11.1.1.3.0]' due to error oracle.iam.platform.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
oim-config.xml was not found in MDS Repository.
Unable to find keystore "default-keystore.jks" in <DOMAIN_HOME>/config/fmwconfig/.
Unable to find keystore ".xldatabasekey" in <DOMAIN_HOME>/config/fmwconfig/.
Password for OIMSchemaPassword is not seeded in CSF.
Password for xell is not seeded in CSF.
Password for DataBaseKey is not seeded in CSF.
Password for JMSKey is not seeded in CSF.
Password for .xldatabasekey is not seeded in CSF.
Password for default-keystore.jks is not seeded in CSF.
Password for SOAAdminPassword is not seeded in CSF.
oracle.iam.platform.utils.OIMAppInitializationException:
OIM application intialization failed because of the following reasons:
oim-config.xml was not found in MDS Repository.
Unable to find keystore "default-keystore.jks" in <DOMAIN_HOME>/config/fmwconfig/.
Unable to find keystore ".xldatabasekey" in <DOMAIN_HOME>/config/fmwconfig/.
Password for OIMSchemaPassword is not seeded in CSF.
Password for xell is not seeded in CSF.
Password for DataBaseKey is not seeded in CSF.
Password for JMSKey is not seeded in CSF.
Password for .xldatabasekey is not seeded in CSF.
Password for default-keystore.jks is not seeded in CSF.
Password for SOAAdminPassword is not seeded in CSF.
at oracle.iam.platform.utils.OIMAppInitializationListener.preStart(OIMAppInitializationListener.java:145)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Has anybody seen this error before or knows how to fix it? Thanks for your help in advance!
Best regards
Tom

This also solved my issue. If you can backup the .xldatabasekey file before you reinstall this will allow the OIM application to read the OIM database. I was successfully able to run rm -Rf and wipe my entire Middleware directory. Then I reinstalled ALL of OIM and SOA back to the same VM. I saved the .xldatabasekey file before hand and dropped it right back to the same folder before I ran the rm -Rf command later after the OIM Domain was installed. Finally, as mentioned above, I logged into EM and found that I needed to add the .xldatabasekey "password" and simply used the same password that I entered during the OIM configure steps for the keystore. Remember the .xldatabasekey password IS NOT the xelsysadm password, but the KEYSTORE password. They are different. I am now able to log into OIM and I can see all the pre-existing users. Thanks for the help!

OIM installation OIM schema missing on configure JDBC component schema

I am trying to install OIM on Linux . I have installed Oracle 11g DB, RCU 11.1.1.6 version, Weblogic 10.3.5 Version, Oracle SOA Suite General version 11.1.1.6. I have installed OIM Version 11.1.1.6 with option install and configure later. I was able to install until this point successfully.
When configuring OIM installation by executing the command in /oracle/Oracle/Middleware/Oracle_IDM1/common/bin/config.sh and moved on to step configure JDBC component Schema .. the page displays only SOA infrastructure, User Messaging Service, OWSM MDS Schema, SOA MDS Schema. The wizard does not display OIM Schema and OIM MDS Schema. I have tried several times and it does not show schemas related to OIM.
Your help is greatly appreciated. I have been trying for almost 1 week and was not successful.

As i.m.k. said, there is no OIM 11.1.1.6. The latest release of OIM is 11.1.1.5 (BP 3 I believe) the base can be found via Patch ID: 12575064. You've downloaded Identity Management 11.1.1.6 which does not contain OIM. At this point, you are going to need to use the RCU 11.1.1.6 tool to roll out the schema creates, then download RCU 11.1.1.5 to recreate the schema. You also need to download the SOA Suite 11.1.1.5 (Patch ID: 13691768) and blowout/reinstall SOA. Likewise with OIM.

Not able to install Oracle 10G on AIX 5.3 64-bit system

Hi,
i have got the software in DVD i have mounted the dvd on the filesystem
/dev/cd0 ---- /mnt (mnt folder contains the software), Have done following things to install but got following errors....
#cd mnt
# ls
client companio doc index welcome.htm
clusterw database gateways index.pdx
$cd database
# ls
doc install response rootpre runinsta stage welcome.htm
#cd rootpre
loadext orclclus pw_sysc2 pw_sysc3 pw_sysca rootpre.sh
# ./rootpre.sh
Required file ./pw-syscall32 is missing.
Aborting pre-installation procedure. Installations of Oracle may fail. // wat does this mean is that file belongs to operating system or missing in the source DVD
# /mnt/database/runinsta
Your platform requires the root user to perform certain pre-installation
OS preparation. The root user should run the shell script 'rootpre.sh' be
fore
you proceed with Oracle installation. rootpre.sh can be found at the top
level
of the CD or the stage area.
Answer 'y' if root has run 'rootpre.sh' so you can proceed with Oracle
installation.
Answer 'n' to abort installation and then ask root to run 'rootpre.sh'.
Has 'rootpre.sh' been run by root? [y/n] (n)
y
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-06-04_12-20-58PM. Please wait ...
Error in writing to directory /tmp/OraInstall2007-06-04_12-20-58PM. Please ensure that this directory is writa
ble and has atleast 69 MB of disk space. Installation cannot continue.
: Error 0
//////// I checked that in tmp folder i have got more than 69MB (i have 2 Gb )
/////// also created folder /u01/app/oracle and mounted in seperate volume which has
/////// 7GB space...
# cd ..
# cd install
# ls
addnode.sh images oneclick.pro .oui response unzip
clusterp.ini lsnodes oraparam.ini resource runinsta.sh
# ./runinsta.sh
./runinsta.sh[3]: ./runInstaller: not found.
Any Help would be appreciated.... struggling to install it.
Thanks & Regards
Bhanu

Hi,
I'm also facing some issues with respect to installation.
The oracle installer is getting started but the GUI screen is
not appearing.The installer is getting stuck with the following error
message.
INFO: Created system preferences directory in java.home".
I also tried starting utilities like xclock which is also not getting started.
Any suggestions would be really appreciated.
Regards,
Mahesh.

Installation of OBIEE 11.1.1.6 in Windows 2003 32-bit

Hi friends,
Im going to install OBIEE 11.1.1.6 latest version in my windows system.
I need to know the exact softwares that i need to download inorder to accomplish it.
Im not sure only the following is needed to install OBIEE 11.1.1.6, but correct me if im wrong.
<li> Database 11g Release 2(11.2.0.1.0)
<li> RCU(11.1.1.6)
<li> OBIEE for windows 32-bit(11.1.1.6)
Can you friends, propose me the exact links of where to download all the above softwares. And also is there any step by step document is available for installing OBIEE 11.1.1.6 along with a screenshot in it.
If so, can anyone help me to a start of latest version of OBIEE 11.1.1.6
Thanks in advance,
Regards,
Saro.

Hi,
Its not only upgrading purpose .its used to install obiee also(without configuration), let say if your going to practice/POC/Personal kind then just go for "Simple" installation ..otherwise just go for Software only installation (Devlopment/Production) Server its just installation there is no configuration.if you want to specify several more configuration settings than go for enterprise install
More about -->obiee11g installation tyeps:
http://gerardnico.com/wiki/dat/obiee/installation_11.1
Simple
Installation with the default settings.
Software Only Install:
The “Software Only Install” requires the configuration done in different phase after the enterprise wide installation is over.
Enterprise
Enterprise installation is mostly required in Scalable system having the configuration required across multiple Weblogic domain or joining a existing domain to existing Weblogic Server .
Thanks
Deva

Installation Crystal Report Server 2008 v1 on Win Server 2008 64-bit fault

Dear Experts,
I have installed Crystal report server v1 on Windows Server 2008 - 64 bit. An error has occured when Bussiness Object Enterprise Start:
I go to Event Log of windows server 2008 and meet an error:
Faulting application cms.exe, version 12.1.0.882, time stamp 0x48cb68c5, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000026, fault offset 0x7776b238, process id 0x3e8, application start time 0x01cb09dbed448690..
Could you please tell me how to fix this problem?
Thanks a lot !!!
Edited by: Ly Thanh Quan on Jun 12, 2010 5:17 AM

Only BO Enterprise supports clustering (Multiple BO server installations on different nodes with a common DB and file repository).
Regards,
Stratos

Installation of E-Business Suite x86 on Redhat Linux 4 64 bits

Dear Sir/Madam,
I am installing E-Business suite on a 64 bits platform however the environment file has not been created. The following error is appearing. Could you please be of a help.
W-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3
command: su applprd -c "/data/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.2/VIS_oracle3.env APPS/APPS"
While checking the environment file on the folder there are other env files not been created.
Database ORACLE_HOME environment file passes instantiated variables test:
File = /data/apps12/oracle/VIS/db/tech_st/10.2.0/VIS_oracle3.env
RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
File = /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.3/VIS_oracle3.env
RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
File = /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.2/VIS_oracle3.env
RW-50016: Error: - APPL_TOP environment file was not created:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/VIS_oracle3.env
ADOVARS environment file passes instantiated variables test:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/admin/adovars.env
APPSCONFIG passes instantiated variables test:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/admin/adconfig.txt
Regards
Stéphane

Hi,
How did you resolve this error:
W-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3
command: su applprd -c "/data/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.2/VIS_oracle3.env APPS/APPS"
While checking the environment file on the folder there are other env files not been created.
Database ORACLE_HOME environment file passes instantiated variables test:
File = /data/apps12/oracle/VIS/db/tech_st/10.2.0/VIS_oracle3.env
RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
File = /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.3/VIS_oracle3.env
RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
File = /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.2/VIS_oracle3.env
RW-50016: Error: - APPL_TOP environment file was not created:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/VIS_oracle3.env
ADOVARS environment file passes instantiated variables test:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/admin/adovars.env
APPSCONFIG passes instantiated variables test:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/admin/adconfig.txt
Thanks,
Naveen
[email protected]

Downloaded the installation program, execute it and the screen and mouse blink intermittently and does not open the installation program. The computer is new, windows 7 professional 64 bit SP1.

run the CreativeCloudSet-Up program, screen and mouse blink intermittently. And the program does not open. My computer is new, freshly removed from box. Windows 7 pro 64bit SP1

Jorgeb55956766 I am sorry that you are facing difficulty installing the Creative Cloud Desktop application. Have you utilized the steps listed in Error: "Failed to install" | Creative Cloud Desktop to reinstall the Creative Cloud Desktop application? If so do you receive any specific error messages?

OIM 11g R2 installation Issue. OIM Schema creation failed using RCU 11.1.2

I have been trying to install OIM 11g R2 on a Windows server 2008 R2 64 Bit and have been encountering the following error during the OIM schema creation. The other schemas, such as Metadata, SOA, user messaging services and other associated schema creation was successful. But, the OIM schema creation was taking more than 2 minutes and finally it fails with the below error.
RCU-6130: Action failed
RCU-6135: Error while trying to execute java action.
Components used:
OS: Windows Server 2008 R2 64 Bit
DBS: 11gR2 (11.2.0.1)
RCU: 11.1.2
The first error occured was ora-12637 packet receive failed followed by Table or View does not exist. I could not fetch much information from the oim and rcu.log.
I have set the processes, open_cursors and session_cached_cursors as suggested in the preinstallation step of OIM 11g R2 installation.
Any pointers on this will be highly appreciated.
Thanks,
Srini

Copy the msvcr71.dll file from rcuHome\jdk\jre\bin inside rcu installer and paste it in C:\Windows\SysWOW64.
Try running the rcu again with the new user i.e. instead of DEV_OIM, run it with DEV_OIM1.
Or drop the DEV_OIM user first and then use the same user.

Installation OIM 9.1.0.1 on AIX 6.1 64 bit

Similar Messages

Maybe you are looking for