Installation on a B&W G3 with Stock 16 Meg Video

This is one of those cases where when you boot off of the installation DVD you get the wonderful greyscale colors. I'm just wondering if there is any fix to this. I do know that if you install 10.3 and then install the 10.3.9 update, the driver is installed and you get your colors back, but before I invest the time into it, I want to make sure I'm not wasting my time.
Thanks in advance.
-Dan
PowerBook 3400C   Mac OS 9.0.x  

Obsolete question.

Similar Messages

  • My mac mini v10.6.8 wont finish installation of update Yosemite and now im stock at boot :( Please help!!

    My mac mini v10.6.8 wont finish installation of update Yosemite and now im stock at boot Please help!!

    Try stating in Safe Mode:
    OS X: What is Safe Boot, Safe Mode?
    Next try reinstalling Yosemite by:
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Installation problem under AIX 5.3 with Oracle 10g

    Hello,
    I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.
    In ImportMonitor.Console.Log i have the following errors:
    Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.
    Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.
    Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.
    Loading of 'SAPSSEXC_4' import package: ERROR
    Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.
    Loading of 'SAPPOOL' import package: ERROR
    Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.
    Loading of 'DOKCLU' import package: ERROR
    Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.
    Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.
    Loading of 'SAPCLUST' import package: ERROR
    Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.
    Inside SAPSSEXC_4.log i have the following errors:
    /usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
    /usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
    /usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
    Compiled Oct 20 2007 02:05:46
    /usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (DB) INFO: T512CLU deleted/truncated #20071130102908
    myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.
    myCluster (63.20.Imp): 656: return code received from nametab is 2
    myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.
    (CNV) ERROR: data conversion failed.  rc = 2
    (DB) INFO: disconnected from DB
    /usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
    Under SAPPOOL i have:
    usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
    /usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
    /usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
    Compiled Oct 20 2007 02:05:46
    /usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (DB) INFO: ATAB deleted/truncated #20071130102908
    failed to read short nametab of table AT01                           (rc=2)
    (CNVPOOL) conversion failed for row 0 of table  VARKEY = ã ±ã ±ã °â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  
    (CNV) ERROR: data conversion failed.  rc = 2
    (DB) INFO: disconnected from DB
    /usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
    I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.
    Do you have any idea how can i procceed with the errors?
    Thank you in advance
    Thanasis Porpodas

    Hi,
    look at sap note 921593 and search for myCluster ,
    read that section following is a part of that note.
    Symptom:
    During the import into a UNICODE system the following error occurs
    (for example in the SAPCLUST.log):
    myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.
    myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended
    myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC    .
    myCluster (63.2.Imp): 1927: logic table is canonical.
    myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.
    myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC    .
    myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC    .
    myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.
    myCluster: CLU4       *00001*
    myCluster (63.2.Imp): 319: error during conversion of cluster item.
    myCluster (63.2.Imp): 322: affected physical table is CLU4.
    (CNV) ERROR: code page conversion failed              rc = 2
    |
    |                              RSCP - Error
    | Error from:            Codepage handling (RSCP)
    | code:  128  RSCPENOOBJ   No such object
    | Dummy module without real rscpmc[34]
    | module: rscpmm  no:    2 line:    75          T100: TS008
    | TSL01: CPV  p3: Dummy-IPC   p4: rscpmc4_init
    `----
    Cause:
    This problem is caused by incorrect data which should have been removed from the source system before the export.
    Solution:
    There are two possible workarounds:
          1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
                  search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.
          2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;
                  search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.

  • I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

    If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
    Try running the install program for the ZSC with the following command line:
    setup.exe /V"STUNINSTALL=1"
    If you've specified an uninstall password, try this one instead:
    setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
    Let me know if that helped you.
    Daniel
    >>>
    From: Andy_DeWees<[email protected] du>
    To:novell.support.zenworks.endpoint-security-management
    Date: 2/5/2009 12:52 PM
    Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

  • Issue with stock qty of component in Structured Articles in SAP BI

    Dear Experts,
    We are extracting stock in BI through SAP standard data source. We have used 2lis_03_bx and 2lis_03_bf data sources. We are facing issue with stock data validation due to structure articles (pre-pack) available in SAP source system.
    We have stock of structure articles available at DC in source system.  When we extract this information in BI, this article gets split into its components automatically. Due to which stock of components articles gets increased with huge amounts.
    To analysis it in further detail, we have created below scenario:
    Article Document Number:  4900000827
    Article Number (Pre-pack):  300000082901
    Article Number (Component): 300000082002
    Stock of pre- pack article at this article document number: 174 pc
    Stock of component article at this article document number: 348 pc (due to splitting of pre-pack article) + 151 (its own stock movement). Total stock for this article is 499. But actually total stock for this article should be 151 only.
    As per our Business requirement, pre-pack article should not be split into its components. And stock in BI should be totally in sync with SAP stock.
    I kindly request you to suggest the solution to rectify the same.
    Thanks in advance.
    --Vikas

    Hi Vikas,
    Check the OSS note L 1320386 - Frequently asked questions regarding BW Trade Foundation too.
    Regards,
    Rajesh

  • Creative Suite 5.5 on Windows 7. Installation problem of Acrobat X Pro with error code 6

    I can install all other programs in this Suite including photoshop and AI ..in design...etc
    But installation failed for Acrobat X pro with the following message even I tried turning off my Anti-Virus or restarted my machine to use Safe mode  ....
    the following is the error message:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW025, DW050 ... WARNING: DW024, DW025 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 11 error(s), 5 warning(s)
    WARNING: DW024: The payload: Adobe Photoshop CS5.1 Core  {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a UI parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS5.1 Core_x64
              This parent relationship is not satisfied, because this payload is not present in this session.
    ERROR: DW025: The payload with AdobeCode:  {857CC5F0-040E-1016-A173-D55ADD80C260} has required dependency on:
              Family: InDesign
              ProductName: Adobe InDesign CS5.5 Icon Handler x64
              MinVersion: 0.0.0.0
              This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
              Removing this dependency from list. Product may function improperly.
    WARNING: DW025: The payload with AdobeCode:  {857CC5F0-040E-1016-A173-D55ADD80C260} has recommended dependency on:
              Family: Adobe Web Suite CS5.5
              ProductName: Adobe Media Encoder CS5.5 X64
              MinVersion: 0.0.0.0
              This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
              Removing this payload from the dependency list.
    WARNING: DW025: The payload with AdobeCode:  {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} has recommended dependency on:
              Family: Adobe Web Suite CS5.5
              ProductName: Adobe Media Encoder CS5.5 X64
              MinVersion: 0.0.0.0
              This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
              Removing this payload from the dependency list.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
              Family: CoreTech
              ProductName: Adobe Player for Embedding x64 3.1
              MinVersion: 0.0.0.0
              This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
              Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
              Family: Shared Technology
              ProductName: Photoshop Camera Raw (64 bit)
              MinVersion: 0.0.0.0
              This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
              Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
              Family: CoreTech
              ProductName: AdobeCMaps x64 CS5
              MinVersion: 0.0.0.0
              This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
              Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
              Family: CoreTech
              ProductName: Adobe Linguistics CS5 x64
              MinVersion: 0.0.0.0
              This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
              Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
              Family: CoreTech
              ProductName: AdobePDFL x64 CS5
              MinVersion: 0.0.0.0
              This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
              Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
              Family: CoreTech
              ProductName: AdobeTypeSupport x64 CS5
              MinVersion: 0.0.0.0
              This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
              Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
              Family: CoreTech
              ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
              MinVersion: 0.0.0.0
              This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
              Removing this dependency from list. Product may function improperly.
    WARNING: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has recommended dependency on:
              Family: Adobe Web Suite CS5.5
              ProductName: Adobe Media Encoder CS5.5 X64
              MinVersion: 0.0.0.0
              This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
              Removing this payload from the dependency list.
    WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed

    my window 7 is English version, which is the same as this design Suite. I can install other programs like Photoshop which is included in this Suite, but I just can't install Acrobat X Pro...so I think it's not language problem... anything else could possibly cause this? thanks!!

  • I have an installation CD Adobe Acrobat 9 Pro with teh Serial No/key. Now I bought a tablet that has now CD drive. So I tried to download the Acrobat 9 Pro from the Adobe hoempage, but failed. I can only find the link to something like an extended version

    I have an installation CD Adobe Acrobat 9 Pro with teh Serial No/key. Now I bought a tablet that has now CD drive. So I tried to download the Acrobat 9 Pro from the Adobe hoempage, but failed. I can only find the link to something like an extended version. So how do I have to proceed , where can I find the proper link. My system has W 8.1 32 Bit.

    Try the download below...
    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  • Installation of CRM 2007 in Windows with oracle and cluster environment

    Dear Experts,
    We are about to start the installation of CRM 2007 (ABAP+JAVA) with
    Oracle 10g on Windows x64 in cluster environment. In the SAPINST dialog
    box under High availability option, I could see installation options like ASCS
    Instance, SCS Instance, First MSCS node, Database Instance, Additional
    MSCS Node, Enqueue Replication Server, Central Instance and Dialog
    Instance.
    I have gone through the installation guide. I have below queries
    regarding the same. Can you please clarify the same
    1) Our requirement is we want to have an ACTIVE-ACTIVE cluster setup
    with sap service running in Node A and Database running in Node B. Can
    we have this setup in ABAP+JAVA setup
    2) Also,in the SAPINST dialog box as said above except last two
    (Central and Dialoge instance) as per standard installation guide are
    to be installed in shared drives as per the requirement. But, central
    and dialog are said to be installed locally on any one node in MSCS or
    in separate server. As per my understanding Dialog instance will be
    used for load balancing which we do not require now. Hence I feel this
    is optional in our case. Where as Central Instance I am not able to
    understand why this option is for? Is it mandatory to be installed or optional. If
    so, when I installed it in one of the MSCS node the incase of failover
    how does it effect the system. As per my understanding ASCS and SCS
    comprise central instance.
    Please clarify and thanks in advance.
    Regards,
    Sharath Babu M
    +91-9003072891

    I am following as per the standard installation guide.
    Regards
    Sharath

  • Production in Aternative Plant with stock transfer

    Hello,
    For our MTO process we have prototyped several scenarios for production of configurable materials over more plants, all based on special procurement keys.
    Scenario 1: procured from other plant with stock transfer (41)
    Scenario 2: production in alternative plant (80)
    With respect to the configuration process and ATP, scenario 2 has our preference. There is one discrepancy, since the plants are far away from each other we need a stock transfer (and paperwork for transportation) between the 2 plants.
    However a feature of production in an alternative plant is that the GR of the semi-finished good is directly in the planning plant.
    Of course we can do a transfer order w/o reference for the semi-finished good from plant A to plant B but nothing is triggering this process and for us no option.
    Any idea how to get such process nicely streamlined? Is there a usable workaround?
    Thanks, Hans
    (note: If no clues, I intend to bring it in as a request for  SAP customer influence)

    Thanks Vaibhav,
    All required CTP settings maintained and ther is PDS in alternative production plant too. The reason being when I remove special proc key APO CTP created planned order for the deficit qty.
    Did you mean to say Original plant means planning plant? but there proc type has to be E with special proc as "80" .SPRO setting is maintained.(maintained Location Determnation settings as you mentioned) I have already tried "X"
    but  did not work..
    Rgds
    SCMBEE

  • 3rd Party with stock update

    Hi all,
    I am trying to setup proces to track SO through process of purchase.
    Much like 3rd party sales processing w. shipping notification with difference that I need to receive goods on stock not on SO consumption and afterwards to ship it away.
    I tried to set up automatic Pur.Request out of Sales Order but was unable to do this without account assignment, and thus always ending up creating PO for consumption and skiping stock.
    Can somebody give me some pointers on how should I setup this.

    Yes, I am aware that in 3rd party scenario there is no stock update cos goods are shipped directly to customer from vendor.
    Mine problem is that I have to make process of tracking SO through Purchasing with stock update and I am stuck with creating Pur.Requisition out of SO with account assignment which then triggering GR on SO consumption.
    Is there a way to create Pur.Requisition automaticaly out of SO without account assignment. So that I can procure to stock and still have update document flow in SO.
    Or maybe this is wrong approach and I should take another one.

  • Materials with stock in a month

    Hi Experts,
    I have to create a report plant wise and month wise for the no. of materials with stock without physical inventory, materials with phy. inventory.for each month in the selection screen.
    Main problem i am facing is, user want to freeze the report values before the current month as every month stock gets changed. means if in june we have 100 materials with stock without phy.inventory in july we have 100 materials with stock without phy.inventory and in current month we have 120 materials with stock without phy.inventory, then report should display.
    june2007 -  100
    july2007  -  100
    Agust2007- 120
    but how we can freeze a report in previous data,  i am selection materials from MARD.
    please help me for this, if any code relatet to this it will be helpful.
    Regards
    Nik

    Hi Santosh,
    Those table i checked but not helpful
    Regards
    Nik

  • The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

    Dear Gurus,
    We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
    The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
    We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
    We updated the Kernel to the latest, but still no luck.
    Request for your quick help as we have to complete it by EOD today.
    Thanks a lot in advance.
    Best Regards,
    Anuj

    Hello Ashutosh ,
    Thanks for your reply.
    We have gone followed the below sequence:
    SCS Installation
    Database Instance Installation using backup/restore method
    CI installation. -> getting error, when we provide the Java Components DVD.
    Best Regards,
    Anuj

  • Inspection lot with stock tab for sale return from customer.

    Dear,
    In our organization there are two scenarios,
    1)     Make to order- Strategy group -20
    2)     Make to stock- Strategy group -10
    I have maintained 05 inspection types in QM view for sale return inspection from customer.
    1) In make to order scenario Inspection lot created with inspection stock tab which is OK.
    2) But in make stock scenario no inspection lot is generated.
        Remember I donu2019t want inspection lot without inspection stock tab as per insp. type-06
    So please suggest me, what can I do for getting inspection lot with stock tab for make to stock scenario.
    Regards
    Shabbir Kureshi

    Hi
    QCC0>Quality inspection>Inspection lot creation>Inspection for shipping>Assign Inspection Lot Origin to Delivery Type-->aganist delivery type Enter 05 inspection lot origine
    Also in OMJJ check whether QM in active for mnt type 651
    Regards
    Sujit

  • Rule Based GATP with Stock transfer order

    Hi Experts,
    I have activated the rule based with stock transfer GATP, but I have the following two issues
    1. when I change sales order in EEC and make  a ATP check , the system will not conisder the previous created stock transfer requisition and create a seperate stock transfer requisition, that is, if I trigger 10 times ATP check, the system will create another 10 stock transfer requisition. does anyone know how to let the system delete the previous stock transfer requisition , then create a new one, or using the existing stock transfer requisition?
    2. the generated stock transfer requisition is always firmed, it causes if the sales order is deleted, the system can not delete the requisition via heuristic. how to let the system generate unfirmed stock transfer requisition?
    thanks

    Rick,
    I have never researched this, so I don't know.
    The reason I have never looked at this is because I would never want any other process to change  supply elements generated by the GATP process.  Once these elements are disturbed, then the confirmations of the Sales orders are also open to be disturbed.  Regular runs of BackOrder Processing, which accompany most ATP solutions, can then change the sales docs with unpredictable results.  Even without BOP, the next Sales person who re-ATPs the order might be in for an unpleasant surprise.
    Best regards,
    DB49

  • Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with inst

    Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation . " What do I do?

    yes, I did that with helping message 3, I'd remove Cs6 only, but it did not help. The message "Failed to initialize the setup program. To identify the problem, download the program Adobe Support Advisor" repeat again =(

Maybe you are looking for