Installation on Enterprise Portal in an existing NW04s JAVA Stack

Hello experts,
we are having a NW04s Java Stack SP17 without EP Packages.
But now we want to install a Enterprise Portal on this stack also.
How can I do this?? Are there some docu's / install guides or something like this!
Thanks a lot
Christian

NW04 go to -> https://websmp102.sap-ag.de/nw04installation -> You'll find it under SAP EP
Also EP documentation is included on the NW04s Java Master guide.
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000659894&_OBJECT=011000358700000071292008E
Regards
Juan

Similar Messages

How to install and add Enterprise Portal over an existing ECC server

Hi Guys
We have already installed the ERP package (ECC) and we have enough memory and diskspace on the server and there we are considering installing Enterprise Portal over the existing server so that we can use both ECC and EP.
How can we do this? What are the steps to do it? I want to make sure that we don't corrupt the existing SAP stuff on the server, but just want to install enterprise portal .
Your comments or suggestions will be highly appreciated.
Thanks
Ram

just went ahead and installed from scratch

Shared Memory Ceation error when we install NW04S Java Stack.

Hi.
I trying to install NW04S Java Stack in Windows 2003/ MS SQL but We got error to starting enqueue service for Java WAS.
Error is
[Thr 4364] Sun Mar 12 23:13:34 2006
[Thr 4364] *** ERROR => ShmDelete: Invalid shared memory Key=34. [shmnt.c 719]
[Thr 4364] *** ERROR => ShmCleanup: ShmDelete failed for Key:34. [shmnt.c 793]
[Thr 4364] initialize_global: enqueue server without replication
[Thr 4364] Enqueue: EnqMemStartupAction Utc=1142172814
[Thr 4364] *** ERROR => [CreateOsShm] CreateFileMapping(37,36 KB) failed with Err=5
 ERROR_ACCESS_DENIED: Access is denied. [shmnt.c 2174]
[Thr 4364] *** ERROR => ShmCreate: Create (37,37664,1) failed [shmnt.c 506]
Anyone have idea for fixing this problem ?
Reagrds, Arnold.

Hi Arnold,
Kindly check if the User SAPService<SID> is a member of
the local administrator group. If not add manually and
try again.
Hope it helps.
Regards
Srikishan

Error (MUT-02041) during Installation of Enterprise Portal 6.0

Hi,
I have got a serious problem during the installation of SAP EP 6.0.
Background Information:
I succesfully installed Netweaver '04 Web AS Java 6.40 system. Operating System is Red Hat Enterprise Linux 3. SAP Database is MaxDB 7.50.
Problem Description:
During step 2 (Deploy JDBC Libraries) of the portal installation process the installation routine stops with error code MUT - 02041.
Complete Error Message:
MUT-02041 SDM call of deploySdaList ends with returncode 4. See output of logfile /tmp/sapinst_instdir/NW04SR1/EP/EP/callSdmViaSapist.log.
Output of Logfile:
Error: Aborted: development component 'com.sapportal.datadirect'/'sap.com'/'SAP AG'/'609.20041012102246.0000':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: Error: Cannot connect to HOST: [CG-DEV-SERVER] with user name: [Administrator]
Check your login information.
Exception is: com.sap.engine.services.jndi.persistent.exception.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: User not authorized.]
Error: -
At least one of the Deployments failed -
What I tried do solve the problem:
I used the Visual Administrator tool to check the user "Administrator". (I used the user "Administrator" to connect to the J2EE Engine - localhost, port 50004).
Administrator is not locked, is member of group Administrators, member of group Authenticed Users, member of group Everyone, is valid until year 2500 and has 80 succesful logon counts.
The user looks fine to me. I do not know what else I could check to solve the problem. Anything I forgot to check? I am grateful for any kind of help (pointer to docs, advise, step by step solution).
Cheers Martin
Message was edited by: Martin Kellermann

Hi,
here an uodate of the progress I am making to solve the problem described above.
Due to the output of the logfile (User not authorized), I think the "Administration" user does not have enough rights to perform the required actions needed for the installation.
Well, I looked it up (Visual Administrator --> Cluster --> Server 0 ... --> Services --> Security Provider -->Runtime --> Policy Configurations --> "service.naming" in "Components" List --> Security Roles).
According to http://help.sap.com/saphelp_webas630/helpdata/en/de/83343ecc7f892ee10000000a114084/frameset.htm, all users and groups that are granted permission "jndi_all_operations" can perform all operations available in the naming system.
I checked and found out that jndi_all_operations is merely a role reference to security role "administrators". Group "Administrators" is assigend to security role "administrator". As I mention before, user "Administrator" is member of group "Administrators". I think user "Administrator" has been granted all required permissions.
Am I wrong, what else could cause such an error message! Need some guideance.
Martin

For an SAP enterprise(4.7), how to add java stack during upgrade to ECC6.0?

Source release: an R/3 4.7 32bit
Target release: ECC6.0 64bit (abap+java)
My plan is to go over the following upgrade steps:
4.7 32bit-> ECC abap only 32bit ->ECC abap 64bit -> install java stack.
Is this the best way?
Thanks a lot!

Hi,
Its always best to go to the enhanced and latest version.
_+4.7 32bit-> ECC abap only 32bit ->ECC abap 64bit -> install java stack.+_
the above step will increase only only the cost.
If ur going for just practice purpose, then no issues u can go for it.
But its always good to go for
4.7------> Ecc(ABAP + JAVA) together.
coming to 32bit and 64 bit. Some constraints are there. If u look at Ecc 6- SR3, it will only support 64 bit.
Look at all those sections and go for upgrade.
Regards,
Ravi

No technical system in sld configuration in Enterprise portals

Dear All,
while configuring sld in Enterprise portal , iam getting web as java and and iam not getting web as Abap technical system, where im doing wrong, i have passed parameters in Data Supplier Bridge, but not getting Abap technical system in sld, please help in this regard,
thanks & Regards,
Balakrishna.

i am trying to setup sld for newly installed sap system in my lab
http://help.sap.com/saphelp_nw04/helpdata/en/23/b557422d095542e10000000a1550b0/content.htm
i think my system is scenario-2 .
as i have ep sneak preview system installed on my single stem with good configuration .
it was running good for enterprise portal.
and i have r/3 system in the network .
i like to setup sld. so as to make connection between ep and r/3
in the above link it says.
first step go and run where sap netweaver administration system
1. i did that on the ep system
2. choose service ->sld services->http service (i did that)
3.but when ??? it comes to host and port of the ( Enter the Host and the HTTP port of the system to which your system will report the data..)
i am not sure about the host and port where do i need to look for that
and even what host name and port number i am supposed to get at the R/3 system end .
it would of great help if some one can throw some light r help me to walk through that
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2167- [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
i hope even this link helps as i followed all these steps
but in that i am unable to see the R/3 system in web as abap( R/3 system is up and running good
thanking you prattipati

Running WDA ABAP on my Enterprise Portal

I have two systems (Netweaver 2004s Java and Netweaver 2004s ABAP) running on two different computers. I have developed an ABAP WDA, tested it and works fine in my SE80->Test Application.
Question 1:
I want to run this now on my Enterprise Portal (Netweaver 2004s Java). Have any of you done this? If so, can you please send me a step-by-step procedure.
Question 2:
I am disappointed by the fact, that Netweaver 2004s ABAP does not have an Enterprise Portal unlike Java. Can anybody tell me if there is a workaround that I dont know of, so that I dont have to go through the process in Question 1 to see my WDA ABAP run on a Portal.
Thank you in advance for your time, effort and generosity to share your valuable knowledge. Its greatly appreciated!
Nagesh

Hi. You will need to set up a system configuartion in your portal to access the ABAP stack.
1) First you need to set up the portal so that it knows the system that you want to connect to. Here is the documenation for setting it up. Once you setup the system, you simply create an iView. When you create the iView it will ask you which system you want to connect to for this WDA app.
http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/0339040c0b11d7b84800047582c9f7/frameset.htm
You will want to use the "template selection" at the appropriate point in the system config wizard. Also you probably want to use the "SAP system using dedicated application server"
2) The portal is implemented on the java stack only, there is not portal that runs on the abap stack. I'm not sure that SAP plans to create there own portal framework on the ABAP stack. Even the portal on the java stack was purchased.
Regards,
Rich Heilman

Enterprise Portal Installation

Dear Expert,
I am New Implementation Consultant, i dont know how to follow the correct procedure. Please provide for us INSTALLATION GUIDE AND IMPLEMENTATION NOTES, AFTER INSTALLATION CONFIGURATION STEPS, DOCUMENT LINKS.
Thanks,
Selvarajs

Hi Selvaraj,
Please check the below help file and link on Enterprise Portal installation.
http://help.sap.com/saphelp_nw04/helpdata/en/22/e082410d4cbe0fe10000000a1550b0/content.htm
http://wiki.sdn.sap.com/wiki/display/EP/PortalInstallation,ConfigurationandCustomizationTips
Hope it helps.
Regards,
Raghu

Enterprise Portal Sneak Preview, quick installation guide

Hello,
Two or three months ago I have installed the SAP NetWeaver Enterprise Portal Sneak Preview SP9. For this purpose I have used the quick installation guide which formerly could be found under the following web-address:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/quick installation guide for sap netweaver ep on maxdb,%20Developer%20Edition%20Sneak%20Preview.htm
Some of my colleagues would like to install the same release now but the quick installation guide is not available any more.
Can anybody tell me where the quick installation guide is or which installation guide I can use instead for SP9?
Thanks!

Hey Guys,
I have mailed it to your ID's.
In case anyone else needs it, you can mail me directly:
[email protected]
Wish you all a successful installation ...
Cheers,
Gaurav

Post Installation task of Enterprise Portal

Subject : During the Post Installation task of Enterprise Portal such as Run Configuration Wizard u201CNWA_01u2026..u201D to u201CNWA_07u2026..u201D for portal system. Run u201CInitial setup of functional unit Development Infrastructure (DI all-in-one)u201D in development portal.
Problem : Can anyone guide me how we are doing ( executing ) task i.e.Run u201CInitial setup of functional unit Development Infrastructure (DI all-in-one)u201D in development portal.What this is step is doing as well as what all the prerequisites for this step.
Work Area : Dev portal with Java stack only.( SP Level is 17)
Please guide me on this step as well as all Configuration Wizard steps( NWA_01 to NWA_07) so that I can finish with the post installation of portal.
Regards
Nilesh

Hi my question has been resolved.

Does Visual composer requires enterprise portal installation?

Hi all,
Does Visual composer requires enterprise portal installation?
or can it be installed standalone and used standalone.
Also does Visual composer reuires BI-JAVA stack,
or can it run on BI-ABAP stack also
Thanks all,
Regards,
Robert

Hi ,
Thx Markus,
one more question...
Is VC a stand alone application/package by itself that does not require EP or does it come with EP.
Thanq.
Regards,
Robert.

New Enterprise Portal Installation (from zero)

Hi All.
I need help to install Enterprise Portal from zero, I need know what portal version is the more recent and the software necessary that I need download.
Thanks.

Hi,
The latest version is SAP NetWeaver 7.3. You can search in SDN or Google to find out the installation guide.
Check the below links...
http://www.sdn.sap.com/irj/scn/index?rid=/webcontent/uuid/a0b8a13a-3be4-2d10-5e9c-c2cb707752c6
https://websmp109.sap-ag.de/~form/sapnet?_HIER_KEY=701100035871000559799&_FRAME=CONTAINER
Let me know if you need more information.

SAP Enterprise Portal - Post Installation Tasks

Hello everyone,
I am a beginner in the area of SAP Enterprise Portal. Please bear with me in case if I ask you stupid questions.
"Our idea is to deploy the BIW 3.5 IVIEW over the portal"
I have installed the SAP Enterprise Portal 6.0 SP6 on Windows 2000 server environment. I have followed the install guide and I have done the installation successfully. I am also able to logon to the portal server using the irl url http://sodium:5000/irj/portal as an Administrator.
As a BASIS administrator point of view, what are the next Post Installation activities that I need to perform?
(Our idea is to deploy the BIW 3.5 Iview over the portal)
I really appreciate your responses.
Thanks & regards,
Nikee

Hello Nikee,
Simply define the SAP BW system, add an Alias, import portal certificate (for SSO), and start creating functional iview that can render your BW queries and reports.
Create a System pointing to the BW server with the following details:
a) System ID
b) Client
c) Web Access Point with "WAS" as category containing the following
entries: -
· Protocol
· Hostname
Note: Domain name of WAS should be same as portal domain
After that create BW iviews
QueryString is in the form "CMD=LDOC&infocube=myCube&query=myQuery"
You should have WAS on the BW server and also IGS shall also be present.
To follow with the latest, see note #489961 and
http://help.sap.com/saphelp_nw04/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm
Hope this will help.
Regards,
AAAttar

Installation Learning Solution on the Enterprise Portal

Hi All!
A have a question: What a business package should be installed on the Portal for Learning Solution?
Thank.

Hi Artsiom, I am going through the same exercise at the moment, and the way I understand it is that LSM Portal is a standalone apps running on a j2ee WAS application server (LSOFE) that can be integrated within the EP portal. The Learning Portal can be called directly by the SAP WAS or it can be integrated as an iView in SAP Enterprise Portal.
Essentially BSPs, so my guess is either integrate the content running on this LSOFE or incorporate BSPs into the EP.
See the following links for the Business packages available:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a7/6f92417e8aac5fe10000000a1550b0/frameset.htm
Instructor: http://help.sap.com/erp2005_ehp_04/helpdata/en/43/9065e6d9f521a6e10000000a1553f6/frameset.htm
Learner: http://help.sap.com/erp2005_ehp_04/helpdata/en/cc/bd580b466cb34eb61e7e9801ffbe2f/frameset.htm
Additional info:
This link has a conceptual architecture to illustrate my earlier comments:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a7/6f92417e8aac5fe10000000a1550b0/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/bc/1f6f740510aa43bb74e2d415b31c57/frameset.htm
Hope this helps,
Thanks
Jim
Edited by: Jim Charette on Dec 14, 2009 12:51 PM

BW Workbook as an iView in the Enterprise Portal

I keeping getting a dialog box asking to select the appropriate program to open the workbook. When I select .xls it opens, and it shows the parameters I entered and not the workbook. The customer is on NW04 Stack 11.
I followed ever step on help.sap.com site as listed below.
BW workbooks are MS Excel workbooks with one or more embedded BW queries. You are able to display these workbooks in the Enterprise Portal as iViews.
Features
Workbooks are displayed in a separate MS Excel window. Opening workbooks within the Web browser window is not possible for technical reasons.
BW workbooks require the BEx Analyzer, which requires a local installation of the SAP GUI for Windows with the BW front end.
SAP recommends that you use BEx Web applications in the Enterprise Portal that run completely in the Web browser.
You can use the function Export as Excel 2000 File from the BW Web application context menu as an alternative to using a local installation of the BW front end if you require Excel functions. See Context Menu Functions and Exporting as a CSV File/Excel 2000 File.
An iView with a workbook can be generated using the Portal Content Studio or Role Upload. For more information, see Generating Content from SAP BW for the Enterprise Portal.
The iViews are of type SAP Transaction iView and have the code link com.sap.portal.appintegrator.sap.Transaction.
The most important properties are System, Transaction (TCODE) and ApplicationParameter.
·The System property contains the alias on the BW system (see Creating BW Systems in the Portal).
·The transaction code for every workbook is RRMXP.
·The value WBID= is in the ApplicationParameter property.
You can determine the workbook ID with the BEx Analyzer:
a. Open the desired workbook.
b. In the BEx toolbar, choose ® OLAP Functions for Active Cells ® Properties. The Information tab page contains the Workbook ID (Server).
Note that with BW workbooks as an iView, the AutoStart property contains the value True (process first screen) and the GuiType property contains the value WinGui.
Anyone have a solution for this to work?
Thanks,
-Eli

Dear Rasmesh,
Please try to do this suggestion:
3. How can I use SAP Application Integrator to access SAP transactions?
There are two different ways to use the SAP Application Integrator transaction iView. In both cases please use a URL like 'irj://com.sap.portal.appintegrator.sap.Transaction' followed by your custom parameters like '?System=DEV&TCode=SE38&GuiType=WinGui &WinGui_Type=Shortcut&OkCode=SHOP'.
The parameters are:
System [mandatory]
TCode [mandatory]
GuiType (=WinGui / WebGui / JavaGui) [mandatory]
WinGui_Type (=Shortcut ..if you want to launch the GUI in a new window)
OkCode (The OkCode that you would like to be executed after the transcation is called by SAP GUI.)
ApplicationParameter (Pass these values to your screen fields which needs to be be separated by
AutoStart (true / false)
UseSPO1 (true / false)
For a complete list of parameters please consult http://help.sap.com.
Taken of:
http://www.sweetlets.com/my_favorites_faq.html
I hope this highline can help you,
Luis

Installation on Enterprise Portal in an existing NW04s JAVA Stack

Similar Messages

Maybe you are looking for