Installation on netbook with a solid state drive

I burned the most current archlinux installation image onto a usb and booted into it on my eeepc 900 netbook. The archlinux splash screen comes up just fine and I am able so select the boot archlinux option. After a bunch of output on the screen it gets hung up after the line:
sd 2:0:0:0: [sdc] Attached SCSI removable disk
ERROR: boot device didn't show up after 30 seconds...
Falling back to interactive prompt
You can try to fix the problem manually, log out when you are finished
/bin/sh: can't access tty; jobcontrol turned off
[ramfs /]#
Any suggestions? Let me know if you need more information about the system or something.
Thanks!

Mac OS X doesn't offer a "clean install" option.
I'm assuming your target Mac is running 10.6?
And you setup the target Mac without adding a Firewire cable until after the Firewire logo appears on the screen?

Similar Messages

HT1661 Problems mounting Imac in target disk mode on retina laptop with a solid state drive as host

I'm trying to use an Imac in target disk mode to copy files from it to a new retina display laptop with a solid state drive, but the target drive will not mount even tho it does start in target disk mode. I have all the proper firewire connection. The Imac will not respond for more than a few minutes before crashing when started from its own system. I would like to salvage a few files from it before I perform a clean install of the system.
Anyone has any idea why it wont mount in Target mode onto the retina laptop? Help!
Thanks in advance. :-)

Mac OS X doesn't offer a "clean install" option.
I'm assuming your target Mac is running 10.6?
And you setup the target Mac without adding a Firewire cable until after the Firewire logo appears on the screen?

Can Apple replace iMac 24" drive with a solid state drive?

Can Apple replace my early 2009 iMac 24" drive with a solid state drive?

An Apple Store will most likely refer you to a local Apple Authorized Service Provider for that type of work.
Go to > Support > Find an AASP > click the Service Box > enter your Zip code and call some of those AASP's to see which one's do that type of upgrade.

Do I need a mount to instal a 2.5 inch solid state drive in my iMac?

Hello all,
I need to replace the hd in my iMac and was thinking of replacing it with a solid state drive. I found a 2.5 inch hard drive but before I purchase the drive I was wondering if I am going to need a different mounting plate as well? The drive I had in mind is OCZ Agility 4 AGT4-25SAT3-512G 2.5" 512GB SATA III MLC Internal Solid State Drive (SSD).
Thank you for nay help.

Looks like an old unanswered question, you need a cheap and simple U-like metal stand, which has the contour of a 3.5 inch HDD, upon which you fix the SSD or any 2.5 ' HDD. This is not absolutely necessary, but you need to fix is somehow there, otherwise you need an adhesive strip or else.

Can I put a SATA 3 Solid State Drive in my Compaq Presario CQ57-447SI?

I would like to upgrade my Compaq Presario CQ57-447SI and replace the hard drive with a solid state drive. I'm considering the OCZ-Vertex-4 2.5 inch SATA 3 Solid State Drive (128GB) but I'm not sure if this will be compatible with my notebook?

Hi:
If a SATA II drive is a lot less, then probably yes.
Notebook specs are very sketchy.
The chipset may be capable of SATA III transfer speeds, but HP may not have SATA III controllers on the motherboard.
http://www.intel.com/content/www/us/en/chipsets/value-chipsets/mobile-chipset-hm65.html
As you can see from the specs at the link above, the chipset has 2 SATA III ports and 6 SATA II ports.
You would think that HP would hook up the primary SATA AHCI controller to one of the 2 SATA III ports, but that may not be the case.
That is the best I can do for you since I don't have your notebook and cannot confirm the speed the drive runs at.
So, if there is not much of a difference in price, I would take a gamble on the SATA III SSD.
Paul

How do I verify my T510 actually has the solid state drive that I ordered?

My machine sometimes makes a loud noise like a hard drive going nuts when it is moving alot of data (as I move data from my old machine to this one). I ordered it with a solid state drive but wonder if a regular hard drive was put in the machine by mistake. I checked Windows system information on the disks and it says I have a "fixed hard disc". I am not familiar with Windows 7 and wonder if it might say that even if it is a SSD.
Thanks

@ the OP, what does device manager say?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

T440 - solid state drives and sleep mode, shutting down, etc.

First time with a solid state drive. With my T61, i tend not to actually shut it down unless i really need to. I just leave it on, close it, and let it go into sleep mode - which i can tell its in because of the moon icon/light. if i just need to move it around the house, i also only put it in sleep mode. If I take it somewhere of course I shut it down first. But that's always a pain, I tend to have multiple browser windows open with many, many tabs. I just hate having to book mark it all (even using bookmark all tabs) then opening them all up again.
So, I'm wondering
1) there doesn't seem to be any light to indicate that its in sleep mode - but maybe it doesn't exist in the same way with a SSD? I was always under the impression that the point of that was to make sure the moving parts of the drive had stopped before you moved the laptop.
2) is it still ok for me to just leave it on most of the time like I do with my T61?
3) Can I get away with not shutting it down when I take it someplace? Other than the battery running down - why would that be a problem since it doesn't have a spinning hard drive?
4) Windows 8, ok this is really a different topic, but I'm here already. When you shut it down, if for example, you have a bunch of browser windows and tabs open and maybe a couple of word docs - when its started back up, will it automatically open all that? Or do i have to re-open all the windows, find the word files, etc.?
5) Anything else I should know about a SSD or windows 8 that is significantly different from what i've had with my T61? (other than the logo being upside down on the top cover)
Moderator Note; subject edited; system type added

Hi again,
1. The red dot over the i in ThinkPad will pulse slowly when your machine is in sleep mode.
2. Yes, absolutely. I use sleep instead of shut down almost exclusively on all machines I use
on a daily basis.
3. Same as before, you don't have to worry about doing anything different. The machine won't
run out of battery during sleep mode for days.
4. It doesn't matter wether you run Windows 7 or 8, you use your browser settings to set it to
open the tabs where you left off.
In Internet Explorer -> Internet Options -> General Tab -> Startup -> Start with tabs from the last session.
In Chrome -> Settings -> On Start Up - Continue where you left off.
Same option is available for Firefox too.
But if you shut your machine down, your programs won't start up automatically with the files you had open
before shutdown, but I'm sure you meant to say sleep, right? When you resume from sleep, everything you
had open will be right there.
5. No, not really. It's just a new generation of a ThinkPad workhorse with a new version of Windows, you
don't have to change any of your daily routines you've gotten used to.
Cheers,
Atli Jarl.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

Creative Cloud to New Solid State Drive

Hello,
I am upgrading my mac mini with a solid state drive, although i already have Creative Cloud on my current harddrive. Will I be able to download Creative Cloud to my solid state drive from the same Creative Cloud account? Or will I need to subscribe to a new membership?

You should be fine to make a copy of your current setup onto a SSD disc, using SuperDuper:
http://www.shirt-pocket.com/SuperDuper/superduperdescription.html
I am going the same way as you soon, and got this description from the guys at Shirt-Pocket:
First, prepare the new drive (in a drive dock or similar) by partitioning it:
* Start Disk Utility
* Select the external drive hardware in the sidebar
* Click the Partition tab (if it doesn't appear, you selected the volume, not the drive hardware above it)
* Use Disk Utility's controls to divide the drive as needed, even as a single large partition. Use "Mac OS Extended (Journaled)" as the format type and name appropriately
* Click Options
* Choose the proper partition scheme (GUID for Intel macs, Apple Partition Map for Power PC) and accept the page
* Click Partition.
Then, make a full "Backup - all files" with "Smart Update" or "Erase, then copy" to the new drive.
Rename the drive to have the *same* name as the original.
Now, shut down and swap the drives.
Power back up -- you'll notice it'll take a while to start (it's looking for the original drive). When it finally boots, open System Preferences and select the new drive as the startup drive in the Startup Disk preference pane.
You will of ourse need to make sure that the amount of data on your current drive does not exceed the size of the SSD.
Ulf

Solid State Drive Upgrade Kit v300a with Windows 8.1 on Envy laptop

I am trying to install the Solid State Drive Upgrade Kit V300a in my new HP Envy with Windows 8.1. This upgrade was listed as an option for this model and was bought with the machine.
The doc lists OS supported, but Windows 8 is not in the list. Is Windows 8 supported?
The included disk labled "Arconis" includes ATIHO user guide pdfs and an HP-Drive-Install-Guide-1.15.13-327pm pdf. The install guide mentions using Arconis. The Arconis user guide says to run "setup" to install Acronis but there is no setup file on the disk. I have chosen the setting to display hidden files and there is nothing on the disk but pdfs. The v300a box claims that it includes Acronis Cloning Software.
How do I install this HP upgrade on my new HP laptop?

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
YES, Windows 8 and 8.1 should be supported.
Please refer to this "HP SSD Upgrade Kit Installation Guide" for instructions on setting-up the HP SSD Upgrade Kit and cloning your factory installed hard drive. Please read the guide carefully and in its entirety. Next, assembly the SSD drive and the drive enclosure, per the instructions on page 9. Now, carefully follow the cloning instructions from page 9 to page 26.
Per the instructions, the cloning software should be on the included CD/DVD and it may be a bootable disc. However, if you are unable to locate the required software, please see www.HPSupport.pny.com to register your product and download any needed software.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

My Mac Book Pro has just had a new memory and solid state drive installed. After the installation, the Lightroom tools all became grey. There is no longer any color on the screen other than my picture. Even the color sliders are grey. Can you please help

My MacBook Pro just had a new memory and solid state drive installed. Since the installation, the Lightroom tools are now all grey. Even the color sliders are grey. Please help!

My guess is that your operating system got updated to Mavericks and that you are running an old version of Lightroom:
Sliders are white, look different | Mac OS X 10.9 Mavericks
Be aware of a Lightroom bug with color management in mavericks that makes shadows too deep in the Develop module: Jao's photo blog: Serious color management bug in Mac OS 10.9 "Mavericks" and Jao's photo blog: Further quantification of the Mavericks color management problem.

X200 SSD (Solid State Drive) with clean-install of Vista or XP?

Hi all,
I apologize for starting a new thread on a new forum; however, I am running out of research time.
I am about to buy a X200 with the 64GB SSD (Solid State Drive) (and it needs to be bought by tomorrow Can I ask couple questions? :
1) I am legally using this for business purposes with an MSDN license, so I can and will install any clean OS immediately. With the option to install any Windows OS; which will work best [or at all] with the SSD? (I have read conflicting articles, but most are outdated due to SSD's being so new.)
2) With only the SSD and without a MediaBase, I read several guides such as This Thread on this Forum on how "fun" a clean install can be...are there any extra difficulties with the SSD?
I am a software engineer and would normally piece this together my research; however, I am running out of time before I have to decide if the SSD is a viable and installable option at this time (and if I should buy it!)
Thanks a lot!
MikeY

Hello to all.
I'd like to know why AHCI mode is being suggested to use for SSD's? Please tell me why. I just don't understand. I think using Raid 0 Array would be the better choice. How does AHCI mode vary compaired to Raid 0 ? Is AHCI a better Mode? Does it give better performance then Raid 0?
I see alot of you are having problems setting up SSD's. I have read the first thing you need to do is make sure the firmware on any SSD you use should be updated.
I also see a lot of people here talking about the need to install Raid drivers. This is true with all other OS's, but I have found that after a fresh format, even on a new HD, I just installed Win 7 64 bit ultimate I went right into device manager to see what drivers are needed, & to my surprise all the drivers were already installed, including Raid driver & controller. I set up my Raid 0 Array at the F10 prompt, rebooted with OS disk with master drive after setting up boot sequence, & continued from there no problem with 2 150GB Raptor HD's in Raid 0.
I have gone as far as to use a Western Digital HD CD utility disc that has a write zero utility & used it to fast write zero's to the first 63 tracks & sectors including track 0 sector 0 where the MBR is written, & I've reformatted & reinstalled Win 7 from that point, & all the drivers still get auto installed. You can go right into device manager & see for your self. The only driver I ever need my be a sound driver update & Graphics driver. I'm not forgetting that the drivers that are auto installed are generic & may need updating, but what I'm saying is, I haven't seen any yellow question marks or exclamation points in device manager like you do with other OS's before Win 7.

Upgrade my Macbook Pro 17" with solid state drive and RAM?

My MBP is a 17" mid-2009, 2.8 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Graphics NVIDIA GeForce 9600M GT 512 MB.
I am an architecture student. I use 3D modeling programs like SketchUp, Revit, AutoCad, etc. According to these software websites, my MBP is sufficient. However, when I'm running these programs, I get the apple "beach ball" a LOT, along with a lot of lagging even when I'm working on simple models. After doing some research, it appears that upgrading my RAM to 8GB (my model's max capability) and buying a solid state drive would help my MBP run much faster and much cooler.
My questions:
1. What brand and exact product #/link to this (if possible) of RAM (2 x 4GB sticks) and SSD should I purchase?
2. Which SSD GB option should I purchase? I chatted with OWC online and was given this variety of SSDs.
http://eshop.macsales.com/shop/internal_storage/SSD/Mercury_Electra_3G_Solid_Sta te
3. I was also given this product bundle recommendation. It's cheaper than buying everything individually, but I'm not sure if I need the tools and I don't understand the purpose/advantage of having the "OWC Express Silver Enclosure".
http://eshop.macsales.com/item/OWC/YSSDMP240/
I just want my MBP to run as fast as possible while running my modeling software w/o spending an arm and a leg if possible. But I don't know if it's worth the trouble and expense to upgrade my current MBP, which I love, or just getting a new MBP or Mac desktop. And if I should just get another Mac, I don't know which one I should get.
Another thing I have seen is the Mac Mini. Is it possible to plug this or any other external device to my MBP in order to accomplish my performance goals without having to modify my MBP or buy another Mac?
This is the first time I've posted any help questions to the Apple Support Community. I really appreciate any advise you Mac experts can give me. I called one of the Apple Stores, but I was definitely not satisfied with the inexperienced rep's answers.
Thanks!

1. OWC or Crucial are recommended sources for memory. You can usually find a 5% off and free shipping code for Crucial on retailmenot.com. On crucial just key in your system information in their memory selector.
2. Your system likely supports SATA II speeds, so the SSD OWC pointed to would work. I installed one in our 2010 mac mini and it's working well. I originally installed their 6G drive however it ran at SATA I speeds. Turns out the 3G which is specd for SATA II is what was needed and works fine.
3. The OWC package they recommended includes a case to put your existing hard drive in. That helps to be able to transfer your data back to the SSD then you can use it as a backup drive or as an external storage device.

Can I upgrade the solid-state drive in a MacBook Pro with retina display after purchase?

There used to be an option to upgrade the solid-state drive when configuring a MacBook Pro on the Apple Store online, but it is now gone. This makes me wonder if Apple's SSDs are built into the computer like the RAM is. So, is it possible to upgrade the SSD later? I don't want to pay so much more to upgrade everything else, so I'd love it if it's possible to just upgrade the SSD later. Thanks!

You will void the warranty. Here are the available post purchase upgrades. http://eshop.macsales.com/shop/SSD/OWC/Air-Retina/Apple-MacBook-Pro-Retina-2012- Drive-Internal-Flash
You should order it with as much storage as you can afford rather than doing a post purchase upgrade because of the warranty being voided.
Message was edited by: BobTheFisherman Sorry. I just noticed I posted the link to a 2012 retina flash upgrade.
Here you go http://eshop.macsales.com/item/Other%20World%20Computing/SSDAP12R480/
Read the specs carefully to ensure this will work for the model Macbook Pro you are getting.

Can I use a solid state drive (SSD) with a G4 1 GHz powerbook? If so, how do I do it?

Hi:
Can I use a solid state drive (SSD) with a G4 1 GHz powerbook? If so, how do I do it? Thanks.
fromx001

fromx001 I believe you can use a SSD as internal drive, of course make sure to buy an ide/ata. There are all sorts of sizes up to 480 GB also in the ide/ata standard. You should however research carefully your purchase, as the performances of your SSD are going to have to rely on firmware "garbage collection", as the older operating systems haven't been written with SSD in mind.
Mac Man JW: some people depend on Classic as a brody said, other people need a phone modem from time to time, other people use the laptop in harsh environments, and at -15C and below, LCD screens easily crack and break; NOT the powerbook which has hot air towards the screen (and it's a machine that heats quite a lot). My alu Powerbook 12", which was *not* treated with velvet gloves, only once had a cracked screen: a cleaning lady had stepped over it (!!!!) no joke. And in normal / light use today, it is still pretty decent and usable.

What SSD (Solid State Drives) will work with a MacBook Pro unibody A1278

What SSD (Solid State Drives) will work with a MacBook Pro unibody A1278?
I see all these options and I would like to know proper dimensions and speed:
SATA III (6 Gbit/s)
SATA II (3 Gbit/s)
SATA (1.5 Gbit/s)
PATA (IDE)
mSATA
PCI Express
Thanks!

Thanks! It looks like Sata III is the way to go and most are happy with this one:
Samsung 840 EVO
http://www.amazon.com/Samsung-Electronics-2-5-Inch-Internal-MZ-7TE250BW/dp/B00E3 W1726/ref=sr_1_1?s=pc&ie=UTF8&qid=1396894663&sr=1-1&keywords=ssd+2.5

Installation on netbook with a solid state drive

Similar Messages

Maybe you are looking for