Installation on solaris Weblogic 6.1

Hi All,
Sorry I don't have much Solaris experience. As a matter of fact no previous unix
knowledge.
Can anyone tell me out to direct Weblogic to install at a particular disk device
other than the default one.
Thanks in advance
Joe

Sorry I don't have much Solaris experience. As a matter of fact noprevious unix
knowledge.
Can anyone tell me out to direct Weblogic to install at a particular diskdevice
other than the default one.
When you run the installanywhere GUI just point it at a mount point that is
a seperate disk device. For instance, if "/" is mounted from
/dev/dsk/c0t0d0s0, and /opt is mounted from /dev/dsk/c0t3d0s2 - just tell it
to install somewhere on /opt.
Its important to remember that unix doesn't use disk "letters" - there's no
such thing as A:, C:, D:, etc. There's only one root directory (hence the
name "root"), and all disks and partitions ("slices" under Solaris) are
mounted as subdirectories of "/".
Kurt

Similar Messages

No Workshop in Solaris Weblogic 7.0 installer ..

Dear all !
I just wanted to inform
you, that the installer ..
bot the net.. and the package
installer don't
work as expected ..
I had the complete Platform 7
file downloaded .. make a custom
install .. click WL Server .. like
mentioned here ..
"...choose Custom Installation and select
WebLogic Server, which includes WebLogic
Workshop."
I did so .. but their is no
workshop directory under weblogic700 ,
like it is the case on our linux box ..
Really strange .. what should I do
to get the workshop too installed ?
Thanks !
Frank

I am having the same problems as Frank described. We're trying to install Platform
7.0 on Solaris 8, but the "workshop" directory is not being created. Has anyone
been successful in installing it into this environment?
Ken Gerlitz
Frank =?iso-8859-1?Q?Gr=FCtzmacher?= <[email protected]> wrote:
>
>
Frank Grützmacher wrote:
Dear all !
I just wanted to inform
you, that the installer ..
bot the net.. and the package
installer don't
work as expected ..
I had the complete Platform 7
file downloaded .. make a custom
install .. click WL Server .. like
mentioned here ..
"...choose Custom Installation and select
WebLogic Server, which includes WebLogic
Workshop."
I did so .. but their is no
workshop directory under weblogic700 ,
like it is the case on our linux box ..Furthermore .. if I
make a custom installation,
and choose everything ..
I can see an advertisement for
the workshop during installation ( a gif ..)
but the workshop is still not installed ..
Seems indeed for me that he is missing
in the Solaris installer ..
Can anyone give me an advise
you can I get the workshop
on my solaris box ?
Thanks !
Frank

ATG 9.4 installation problem with weblogic 10.0.2 MP2

Hi,
I am new in ATG platform and framework.
I am trying to install ATG 9.4 on BEA Weblogic 10.0.2 on Windows desktop with the help of Installation guide for ATG.
I have completed installation of BEA Weblogic 10.0.2 and then ATG 9.4, giving the correct paths as mentioned by installation guide.
After that I am trying to configure datasource and database with the help of CIM.
But it is throwing error as
The system cannot find the path specified.
Press any key to continue.......
I think I am missing any configuration step or any manual configuration.
Could some one please help me about next manual steps for configuration after the ATG installation is complete.
Could you please help me on this regards as I need to setup ATG platform on my system as soon as possible.
Many Thanks for help in advance.

**The system cannot find the path specified.**
**Press any key to continue.....**
Correct me if wrong but it appears that you are encountering this as soon as you start cim.bat? Have you tried starting cim after setting DYNAMO_HOME as:
set DYNAMO_HOME=D:\ATG\ATG9.4\home
You can also try to temporarily comment out the first line in cim.bat by putting a "rem" before @echo off as: rem @echo off
This will print all the paths and commands on console that are being setup and used by cim.bat then see if you can find out something wrong from it. Later on you can undo your change in cim.bat. Check if you can find any more details about your error in the CIM logs present under ATG9.4\CIM\log.

Problem with ana 3.6 Installation on solaris 10

Hi,
I'm going to install Cisco Ana 3.6.5 on Solaris 10 and this is my first experience.
here are the information about my installation:
OS: Solaris 10 64-bit
Oracle 10g 10.2.0.3
I have installed Oracle and now when i try to install ana gateway , i get this Error Message:
- sheer doesnt exist, creating in /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf table space...
*** ERROR: Can not create table space /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf. ABORTING. ***
could you please help me?
Thanks in advance

I've solved the problem by setting password for scheme sheer to cisco !
- Enter the Oracle sid: MCDB
- Enter the Oracle admin username: system
- Enter the Oracle admin password: ********
- Enter the password for the scheme sheer: cisco
- Enter the location of the data files: /export/home/oracle/product/db_10g/oradata
- Enter the Oracle Listener port: 1521

1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk? 2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?

FYI....boot from SAN is required for physical server (T4-1) (not OVM).
1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
The SAN disks allocated are visible in ok prompt. below is the output.
(0) ok show—disks
a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
h) /iscsi—hba/disk
q) NO SELECTION
valid choice: a. . .h, q to quit c
/pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
Type “Y ( Control—Y ) to insert it in the command line.
e.g. ok nvalias mydev “Y
for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
(0) ok set—sfs—boot
set—sfs—boot ?
We tried selecting a disk and applying sfs-boot at ok prompt.
Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
As we know that ZFS is the default filesystem in Solaris 11.
We have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.
I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.

Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.

Installation error Solaris 10-u6-ga1

I must be missing something really obvious on the installation of Solaris 10 U6. I've come up against the error message upon manually partitioning, and using UFS. After the install the error is:
Solaris 10 10 software installation partially failed
Solaris 10 packages partially installed
SUNWlur
Then at reboot it loops and loops
If I install using ZFS no problem. Unfortunately I have to use UFS for this install.
I pulled down the sol-10-u6-x86-ga1 dvd and installed on an Vmware to see what I'd get. If I manually setup the drive, it fails to with the same error.
Here is my drive layout both sparc server and vmware(x86)
/ = 10 Gb
swap = 10 Gb
/etc = 10 Gb
/usr = 10 Gb
/var = 10 Gb
/export=remaining drive space.
I'm I missing something obvious?
thanks
bill

There should be more information in the install log about why the one package failed. If you search for the package name in the log you should be able find it. Then that might help determine whether the package can be installed on its own, possibly fixing your reboot issue.
-- Alan

How to Add a Physical Interface After Installation in Solaris 10

How to Add a Physical Interface After Installation in Solaris 10
Hi Java Specialist,
I am trying to setup a network interface with the following steps on a new fresh Solaris 10 installation using the instruction titled How to Add a Physical Interface After Installation in Solaris 10 3/05 ONLY from http://docs.oracle.com/cd/E19253-01/816-4554/esxhb/index.html:
1. # ifconfig lo0 plumb up
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment prior to installing Solaris
10 on top of it.
3. # Added saturn to /etc/hostname.lo0.
4. # Added 10.56.8.101 to /etc/inet/hosts
5. # Added 10.56.0.0 255.255.240.0 to /etc/inet/netmasks
6.# reboot
However, the following errors kept recurring:
svcs –xv …. unable to qualify my own domain name,
failed with exit status 69.
Any idea on what other steps have I missed? I was hoping to only do step 3 – 6 for the change to apply permanently.
Many thanks,
Jack

Hi Java Specialist,... in a Solaris forum?
1. # ifconfig lo0 plumb upThe loopback connection (your lo0)is NOT a physical interface. There are no hardware components for it. Nor can I think of any reason why it should ever be anything other than the default 127.0.0.1
Use your favorite Internet search site (such as Google, Bing, Yahoo) to learn more about it.
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment ...I have no idea how a nonexistent software construct gets a DHCP address in a MS Operating System, unless you are confusing this with the "Microsoft Loopback Adapter" which is an utterly different concept. Again, go see what Google tells you.
<br>
<br>
<br>
... completely unrelated to configuring an IP...
unable to qualify my own domain nameAgain, search the Internet or even search these forums with that string of words.
Go back through your two most recent posts and read the responses again.
They seem to both be on the same topic as this new one -- configuring an IP on something.
How to initialize new IP address on secondary interface permanently
How to change IP address permanently on Solaris 10
When you've done all that, then come back and tell us what you are actually trying to do.

Installation of Solaris 9 Intel Version in Windows XP PC

I am very much interested in installation of Solaris 9 intel version in my PC which is windows XP version.
My PC Processor : AMD Athlon
I am not able to install solaris 9 in my PC.
Sun boot version is Sun OS secondary boot version 3.0.
During installation,i am going untill selection of type of installation. After selecting the Interactive type,the system is rebooting again without installing.
Select the type of installation you want to perform
(1) Solaris Interactive
(2) Custom Jumpstart
After selecting from above,the system is rebooting again without installing.
Please help me with the installation.

Try on HCL BigAdmins website to know if your hardware is supported

Installation of Solaris 9 intel version in windows XP

I am very much interested in installation of Solaris 9 intel version in my PC which is windows XP version.
My PC Processor : AMD Athlon
I am not able to install solaris 9 in my PC.
Sun boot version is Sun OS secondary boot version 3.0.
During installation,i am going untill selection of type of installation. After selecting the Interactive type,the system is rebooting again without installing.
Select the type of installation you want to perform
(1) Solaris Interactive
(2) Custom Jumpstart
After selecting from above,the system is rebooting again without installing.
Please help me with the installation.

Are you trying to install Solaris 9 onto a server that is already running Windows XP and to keep Windows XP too?
You'll need to create a partition on which to install Solaris, - search for Solaris Windows Dual Boot on docs.sun.com for more information.

Need Agent Installer for Solaris (SPARC)

Hi All,
I have downloaded Grid Control Agent Installer for Solaris from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html.
When I tried to extract the zip file, I am getting the following error message.
"Can not open file. It does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
Even I tried using http://sac.us.oracle.com/download/index.html also but getting the same error.
Please send me the location if you have,
Thanks
Sumathi

Most commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
So you can't get as close as you may want, but I'll bet it would still be helpful.
Darren

Access manager installation on solaris zone

Hi
I have installed the Access manager 7.0, Sun java system app server 8.1, Sun sirectory server 5.2 through JES installer on solaris 10 zone AM55-zone. Installer summarry is below, which shows installtion complete without error, but I am not able to launch the amserver login page.
Any suggestion, what I did wrong? any thoughts?
Sid
Installation Complete
Software installation has completed successfully. You can view the installation
summary and log by using the choices below. Summary and log files are available
in /var/sadm/install/logs/.
Your next step is to perform the postinstallation configuration and
verification tasks documented in the Postinstallation Configuration and Startup
Chapter of the Sun Java(TM) Enterprise System Installation Guide. See: http:
//docs.sun.com/doc/819-2328.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} 1
Installation Summary Report
Install Summary
Java Enterprise System : Installed
Sun Java(TM) System Message Queue 3 2005Q4 Enterprise Edition : Installed
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 : Installed
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server 5 2005Q4 : Installed
Sun Java(TM) System Access Manager 7 2005Q4 : Installed
Configuration Data
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 :
Domains and Instance Configuration Directory : /var/opt/SUNWappserver
Application Server Installation Directory : /opt/SUNWappserver
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /opt/SUNWcomds
Sun Java(TM) System Directory Server 5 2005Q4 :
Directory Server Admin User : admin
Directory Server Manager : cn=Directory Manager
Directory Server Identifier : AM55-zone
Directory Server Port : 389
Directory Server Root Suffix : dc=ipsolutionshowcase,dc=com
<--[33%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Directory Server Administration Domain : ipsolutionshowcase.com
System User : root
System Group : root
Existing Configuration Directory : 0
Configuration Directory Host : AM55-zone.ipsolutionshowcase.com
Configuration Directory Port : 389
Configuration Directory Admin User : admin
Existing User Directory : 0
User Directory Host : AM55-zone.ipsolutionshowcase.com
User Directory Port : 389
User Directory Admin User : admin
User Directory Suffix : dc=ipsolutionshowcase,dc=com
Disable Schema Checking : 0
Add Sample Entries : 0
Populate Database : 1
Sun Java(TM) System Access Manager 7 2005Q4 :
Access Manager Installation Directory : /opt
Access Manager Protocol : http
Access Manager Port : 8080
LDAP User ID : amldapuser
<--[66%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Administrator User ID : amAdmin
Web Container : AppServer
Access Manager Application Server Installation Directory :
/opt/SUNWappserver/appserver
Document Root : /var/opt/SUNWappserver/domains/domain1/docroot
Access Manager Console Host (for Existing console) : AM55-zone.
ipsolutionshowcase.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : AM55-zone.ipsolutionshowcase.com
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .ipsolutionshowcase.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : AM55-zone
Access Manager Directory Server Host : AM55-zone.ipsolutionshowcase.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : dc=ipsolutionshowcase,dc=com
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
<--[100%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} !
You have new mail in /var/mail/root
bash-3.00#
bash-3.00# cd /var/opt/mps/serverroot/slapd-AM55-zone
bash-3.00# ./start-slapd

Thanks samk,
After the installation, I have started the Directory server,admin,and console with following commands:
bash-3.00# directoryserver start
bash-3.00# directoryserver start-admin
SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 02:48
warning: daemon is running as super-user
[LS ls1] http://AM55-zone.ipsolutionshowcase.com <http://AM55-zone.ipsolutionshowcase.com> , port 390 ready to accept requests
startup: server started successfully
bash-3.00# directoryserver startconsole
Recieved the Login console window,logged in and got the ipsolutionshowcase tree.
What are the next steps I need to folow in order to launch the Access Manager page?
Ant thoughts?
Thanks for ye help
Sid

Unable to enter Agent name and port details while doing ODI (11.1.1.6) installation on Solaris

Unable to enter Agent name and port details while doing installation on Solaris, Installation wizard is moving slowly and at 'Specify Agent Details' page it is not allowing me to enter the details and now I am not able to continue installation.
Please let me know if I am missing anything and there is any solution.

just in case cross verify the certiication matrix for 11.1.1.6
http://www.oracle.com/technetwork/middleware/data-integrator/odi-11gr1certmatrix-163773.xls
Thanks,
Saichand

11gR2 installation on Solaris failed with prereuisite 124861-15

The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.

Hi,
The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.
Refer my post *11gR2 Installation Error with patch 124861-15 as pre Req*
http://appsdbaworkshop.blogspot.com/2010/11/11gr2-installation-error-with-patch.html
thanks,
X A H E E R

Wu-ftpd installable for solaris 10 and solaris 9

Hi,
I could see only "proftpd" is available http://www.sun.com/software/solaris/freeware
But I am looking for the "wu-ftpd" server which is compatable with Solaris 9 and Solaris 10.
Any one help me from where I can get the "wu-ftpd" installable for solaris 9 and solaris 10 sparc server.
thanks,
Amudha

Hi Robert,
Thanks for your reply.
I too saw that the ftp version used in solaris 10 by default is wu-ftpd, but I am not sure about it, because when I tried to ftp to my solaris box the version it is started is not "FTP server (Version wu-2.6.2(5)".
I have got the wu-ftpd installable. But I could not get the proper document for configuring the same.
Question1: How to stop existing ftp service and start newly instlaled wu-ftpd in Solaris 9 and Solaris 10 servers?
Earlier solaris 8 version I change the ftpd version in /etc/inetd.conf file and give HUP signal to inetd then this new wu-ftpd version will be used.
Question 2: It always starts the system inbuilt ftp server and also I am getting ftp log in failure for any user which I add newly or even existing users.
could any one help to resolve these issues? Thanks in advance for your help.
Amdudha

BS 2005 SR3 Installation Master Solaris on x64 64bit

Hi,
According to the SAP's Product Availability Matrix, DB2 is a supported database for installing SAP Netweaver 7.0, however when using the sapinst in BS 2005 SR3 Installation Master Solaris on x64 64bit, there is no option to select DB2 as the database.
Does anyone know if there is a workaround or another Installation Master that we can use for this?

Hi Setu,
Which DB2 version are you using ?
If it is DB2 V9.5 then check SAP Note 1089578 - DB6: Using DB2 Version 9.5 with SAP Software
Thanks
Sunny

Installation on solaris Weblogic 6.1

Similar Messages

Maybe you are looking for