Installation Oracle Client 8.1.7 on Windows NT Server

I am trying to install Oracle Client 8.1.7 on Windows NT Server:
1) I started autorun
2) Clicked the "Install/Deinstall" Button
3) NOTHING happened execpt that the screen for autorun disappeared
What's the cure for this?
Regards
Davide

Hi,
if you're running the installation on a Pentium4 have a look at this thread:
Oracle Installation or Uninstallation Solutions For Windows 95/98/2000/ME/NT/XP
from Beau Leo

Similar Messages

Can't Recorde Response file for Oracle client 11.2.0.3 windows 32bit

Hello
We are going to upgrade our Oracle client on our clients to 11.2.0.3. But I can not record a resopnsfile with setup.exe.
Have Oracle removed this feature?
Here's a dump from setup.exe -help
There is no possibility to run setup.exe witch -record -destinationfile option
Preparing to launch Oracle Universal Installer from C:\Users\Test\AppData\Local\
Temp\OraInstall2013-01-14_02-12-48PM. Please wait ... Usage:
setup [-options] [(<CommandLineVariable=Value>)*]
Where options include:
-clusterware oracle.crs,<crs version>
Version of Cluster ready services installed.
-crsLocation <Path>
Used only for cluster installs, specifies the path to the crs home locat
ion. Specifying this overrides CRS information obtained from central inventory.
-invPtrLoc <full path of oraInst.loc>
Unix only. To point to a different inventory location. The orainst.loc f
ile contains:
inventory_loc=<location of central inventory>
inst_group=<>
-jreLoc <location>
Path where Java Runtime Environment is installed. OUI cannot be run with
out it.
-logLevel <level>
To filter log messages that have a lesser priority level than <level>. V
alid options are: severe, warning, info, config, fine, finer, finest, basic, gen
eral, detailed, trace. The use of basic, general, detailed, trace is deprecated.
-paramFile <location of file>
Specify location of oraparam.ini file to be used by OUI.
-responseFile <Path>
Specifies the response file and path to use.
-attachHome
For attaching homes to the OUI inventory.
-cfs
Indicates that the Oracle home specified is on cluster file system (shar
ed). This is mandatory when '-local' is specified so that Oracle Universal Insta
ller can register the home appropriately into the inventory.
-clone
For making an Oracle Home copy match its current environment.
-debug
For getting the debug information from OUI.
-detachHome
For detaching homes from the OUI inventory without deleting inventory di
rectory inside Oracle home.
-enableRollingUpgrade
Used in cluster environment, to enable upgrade of a product on a subset
of nodes (on which the product was installed).
-executeSysPrereqs
Execute system pre-requisite checks and exit.
-force
Allowing silent mode installation into a non-empty directory.
-help
Displays above usage.
-ignoreSysPrereqs
For ignoring the results of the system pre-requisite checks.
-local
Performs the operation on the local node irrespective of the cluster nod
es specified.
-printdiskusage
Log debug information for disk usage.
-printmemory
Log debug information for memory usage.
-printtime
Log debug information for time usage.
-relink
For performing relink actions on the oracle home
Usage: -relink -maketargetsxml <location of maketargetsxml> [-makedepsx
ml <location of makedepsxml>] [name=value]
-silent
For silent mode operations, the inputs can be a response file or a list
of command line variable value pairs.
-waitforcompletion
Installer will wait for completion instead of spawning the java engine a
nd exiting.
-suppressPreCopyScript
Suppress the execution of precopy script.
-acceptUntrustedCertificates
Accept untrusted certificates from a secure site.
-suppressPostCopyScript
Suppress the execution of postcopy script.
-noconfig
Do not execute config tools.
-noconsole
For suppressing display of messages to console. Console is not allocated
-formCluster
To install the Oracle clusterware in order to form the cluster.
-remotecp <Path>
Unix specific option. Used only for cluster installs, specifies the path
to the remote copy program on the local cluster node.
-remoteshell <Path>
Unix specific option. Used only for cluster installs, specifies the path
to the remote shell program on the local cluster node.
-executePrereqs
To execute only the prerequisite checks.
-ignorePrereq
To ignore running the prerequisite checks.
-ignoreInternalDriverError
To ignore any internal driver errors.
-downloadUpdates
To download updates only.
-showProgress
To show the installation progress on the console. This option is support
ed only in case of silent installation.
Command Line Variables Usage
Command line variables are specified using <name=value>; for example:
[ session: | compName: | compName:version: ]variableName=" valueOfVariable"]
Session/Installer variables are specified using:
[session:]varName=value
Ex 1: session:ORACLE_HOME_NAME="OraHome"
Ex 2: ORACLE_HOME_NAME="OraHome"
The lookup order is session:varName then just varName. The session prefix is
used to avoid ambiguity.
Component variables are specified using:
[compInternalName:[Version:]]varName
Ex 1: oracle.comp1:1.0.1:varName="VarValue"
Ex 2: oracle.comp1:varName="VarValue"
The lookup order is compInternalName:Version:varName, then compInternalName:
varName, then just varName.
Please press Enter to exit...

Hi,
There is no record option with 11gR2.
There is no need to use '-record' flag to record/save the response file. At Summary page of installation, 11gR2 installer provides option to save the response file. We can perfom the silent installation using this saved response file
Unix:
./runInstaller -silent -responseFile <saved_response-file>
Windows:
c:\software\11.2.0.1\database\setup.exe -responseFile <saved_response-file>
For more details, kindly refer
11gR2 Install (Non-RAC): Understanding New Changes With All New 11.2 Installer (Doc ID 884232.1)
4th point in the document explains about this
Thanks,
Krishna

How to install Oracle Client 9i 32 bit at windows 7 Pro 64 bit ?

My company hava many computer are running windows xp 32 bit , and now we buy a lot of HP computer are running windows 7 Pro 64 bit . We have Oracle Client 9i 32bit for our database link ,but we have no extra bugde to buy new Oracle license for our database network , so how can I install Oracle Client 9i 32bit at windows 7 Pro 64 Bit ?

efe603fc-4926-43ae-8c83-1b5a92c66110 wrote:
My company hava many computer are running windows xp 32 bit , and now we buy a lot of HP computer are running windows 7 Pro 64 bit . We have Oracle Client 9i 32bit for our database link ,but we have no extra bugde to buy new Oracle license for our database network , so how can I install Oracle Client 9i 32bit at windows 7 Pro 64 Bit ?
Ummm .... client license?
All license questions should be addressed to Oracle. I believe what you'll find is that the license for client installation is free. What you pay to license and support is the rdbms (server) software.
But all licensing questions should be addressed directly to Oracle. A license agreement is a legal issue, and this forum will have no standing in court.

Installation oracle client 10g fails

Hi,
I am installing the oracle client 10g in a machine with windows 2000 server advanced with SP4.
At the end of the installacion, this when in 99 %, he(she) returns this mistake to me
"abnormal program termination" and "updating registry key".
Someone knows something of this mistake.
Thank you

Hi,
Also check you have already install oracle software before.. if yes first uninstall complete oracle software which installation previously and delete related values from registry and try to install again.
regards
Taj

Is Oracle client 10g or 11g for Windows 2008 R2 (6.1) available yet?

I have not been able to locate this. If this has not been released, does anyone know when? I have tried the Windows 2008 64 bit 11gR1 (11.1.0.7.0) client on a Windows 2008 R2 with no success. Thanks.

user12871152 wrote:
Is there any update on the release date of the Windows 2008 R2 Oracle client? Rumor has it we might see it March 2010. Can someone confirm or deny?I can confirm that there is such a rumor.
I can also confirm that a Support note 742060.1 "Release Schedule of Current Database Releases" provides further information.

Problem with Oracle Client(64 bit) install on Windows 7

Hi,
I am trying to install Oracle Client 64 bit (win64_11gR2_client) on my laptop and its giving me all the pre requisite failed for "Physical Memory, Free Space, Architecture and Enviornment variable: Path". So i need to exit that setup.
I have enough space almost 130 GB free on my laptop. Also, i cleared temp data. Then increased physical memory to 4096 MB but still facing the same error and not able to install the Oracle Client on my laptop.
Please assist as soon as possible.
-Parth

Pl identify exact version of Win 7 - you will need Professional version or higher - Home versions are not supported. Pl verify you meet all of the pre-reqs for the install as identified in the Install Guide - http://download.oracle.com/docs/cd/E11882_01/install.112/e16774/pre_install.htm
HTH
Srini

ORA-12546 error during installation of 9.2.0.1 on Windows 2003 Server

I have encountered an error whilst installing oracle 9.2.0.1 on a Windows 2003 Server. The error appears in the final part of the installation, when the Database Configuration Assistant is performing some work - it reaches the part where it creates the database instance - here we get the "ORA-12546: TNS Permission denied" error - this part of the installation is marked as failed - i can retry it as many times as i want but the same thing happens. If i finish the installation (even though the error has occurred) the oracle installation doesn't really work . I can't open the Database Configuration Assistant and don't really have a sysdba user. However all the services seem to be running fine (even the tns listener)
I was wondering whether it could be a problem that would be solved with the 9.2.0.3 patch - but this patch assumes that you have performed a proper working installation of 9.2.0.1, so I'm not quite convinced that the problem is related to the oracle version.
I've read other threads where the problem has been read/write privileges on some files and folders, but this shouldn't be an issue when I'm logged onto the machine as a local administrator.
The install.log files don't really provide any extra information.

I have exactly the same problem installing Oracle on a Windows Server 2003 X64 Enterprise Edition. I have Intel Xeon processors (EM64T).
I tried to install Oracle for 64 bits, but it didn't work. Now I'm trying to install 32 bits version of Oracle, and I get the same error and the same problem, mentioned above.
Can anyone help us, I can't figure out a way to solve it. I don't know if Oracle for 32 bits is not compatible with that version of Windows, even if it is supposed to be.
Thanks!!!!

Can oracle discoverer 10 be installed on Windows 2003 server

Hi,
I have couple of queries related to Oracle Discoverer. Need help urgently.
1. Can Oracle Discoverer 4.1 version support Windows 2003 on which Citrix server version 4 or above is installed? If yes, please let me know the patch details to download the same.
2. Can Oracle 10g BI Tool, Oracle Discoverer Administrator and Desktop be installed on Windows 2003 Server Operating System on which Citrix server version 4 or above be installed?
Thanks in advance.
Regards,
Rajesh Gurram

Hi,
1. Discoverer 4.1 has been desupported but was only certified for Windows 200 and XP
2. Discoverer Desktop and Admin is support on Windows 2003:
2003 SP1+ 10g (10.1.2.0.2 )
One thing I have to mentioned is that Oracle does not support any Citrix client operations.
If ever you encounter a problem you will need to reproduce the problem
outside of the Citrix environment to prove that it is not the cause of the problem.
Regards
Roelie Viviers

URGENT!Stuck while installing the Oracle apps 11.5.8 on Windows 2000 Server

Hi All,
I am installing the Oracle applications 11.5.8 on windows server 2000 using the rapid install 11.5.8.11(which was part of the cd pack).
I am using the Windows CD Pack(which consists of 19 cds)
To start with, it has passed all the pre install checks(including the utlity check, system check etc), every thing was succesful and then I started the installation.
And then I started installing, I inserted 1 cd at a time. Every thing went smoothly until the 5 cd. While processing the 5th CD, it started spawning the dos session and was trying to connect to the created database. And it was not able to do so.
I could see from the status bar that it was trying to run the scripts like adlicnse.sql, adclobtmp.sql ,adclobconv.sql
and throwing the following message
ora-01089: immediate shutdown in progress
and was asking me to enter the user name . When I entered the username and password, it throws the message saying that
"ora-01089: immediate shutdown in progress".
After such unsuccesful attempts for each of the above mentioned file, I finally go the "Oracle Applications Rapid Install Wizard Alert"
displaying the below message.
Error code received when running external process.
Check log file for details.
Running Database Install Driver for PROD instance.
and then with the "Retry" and "Abort" buttons. When I pressed the retry button,still get the same message. (And I did not find any log file to look for).
Please let us know what are we supposed to do now and what is the exact reason why it is not able to connect to the database.
I have not tampered with any of the files. This is a urgent requirement for us to install the oracle apps, please help us immediately and any help is widely appreciated.
Thanks.

your problem is not very unusual... I also faced the similar situation cpl of times when Oracle was not able to continue the installation coz the Immediate Shutdown was failed. Actually During the installation, Oracle mounts/opens the database and shuts it down many times and few times, Oracle is unable to shutdown cleanly as some process is hanging or not responding.
Piece of advise is that always use staging area to install Apps as it takes long time on Win2K (anything between 4-12 hrs) to install it and CDROM Access is lot slower than HDD. Also, it will prompt u every time to insert tbe CD. All this hassle can be bypassed by using the staging area. Read the Installation help document on how to create it.
For failure reasons, look in ur installation log file which is created in the default Temp folder usually C:\documents and settings\USERNAME\local settings\temp for WinXP or C:\winnt\documents and settings\USERNAME\local settings\temp for Win2K.
post or email me at [email protected] or [email protected] for further help/details.

Oracle 10g Universe Connectivity From 64bit Windows 2003 Server

Hi,
Have an existing BO XI 3.1 environment built on a 64 bit Windows 2003 server and
I'm having problems getting it to communicate with Oracle 10g universes. Works fine
with its SQL Server 2005 repository and SQL Server 2005 relational/olap universes, but
cant seem to get it to work with Oracle.
Universes work fine on the 32 bit development environment talking to the same Oracle
database, but when move them to 64 bit testing environment they all fail with
Oracle ora-12154 errors.
32 bit Oracle client is installed and can communicate fine with other products using ODBC
connections from the server - but BO refuses to communicate.
Any ideas other than reinstalling BO under 'Program Files' rather than 'Program Files (x86)'
as I've seen some references on the web about this possibly being a problem?
Thanks.

Hi,
Oracle 32 bit and 64 bit connectivity work fine from the server. The problem seems to
relate to bug 3807408 in Oracle 10g that cant handle parentheses in directory names.
So BO being installed in u2018C:\Program Files (x86)\Business Objectsu2019 causes it to get
rather annoyed.
SAP Note 1202730 does cover this, but our DBA's aren't too keen on installing the
suggested patch. I'm also not very keen on reinstalling BO in a different directory as
we've got working production sites that would have to be rebuilt.
So now investigating whether using the Oracle 11g client will resolve this.
MSDN forum topic http://social.msdn.microsoft.com/forums/en-US/sqlintegrationservices/thread/ab662d63-6385-4f73-b27f-d526048f601f/ gives a pretty good overview of what people have been trying to resolve this.

Citrix Client M/c Not Responding - Windows 2000 Server

Hi all,
I have Windows 2000 Server with Terminal Services and Citrix Metaframe 1.8 for Windows 2000 running on it. We are using Oracle Apps 11i and Oracle 8i on Sun Solaris 8.
The Citrix Clients are Win 95/98 m/c running ICA32. The ERP Application is run by the clients through Citrix Server using IE5.0
Some of the forms are not responding always when client is using citrix technology but the same client(s) can run the application when he is using his own IE5.0
Can somebody help us out. Is it supported by Oracle Apps 11i or not. Or some fine tuning is to done or some patches are required to be downloaded.
Thanks in advance.
Dinesh Yadav
null

Is this a true Apps 11i environment? Why do you need to go through Citrix instead of direct browser access?

Oracle 8i 8.1.7 on Windows 2000 Server

After I install Oracle 8.1.7 on Windows 2000 Professional, Everything is Good, database and Enterprise Manager Server startup normal.
But when I install Oracle 8.1.7 on Windows 2000 Server, the Oracle Service startup normal , but the database instance can not startup automatical, I must startup the database instance manual using svrmgrl program and the Enterprise Manager Server can not startup ?

check it:
start
-->program
-->$oracle_home$
-->Database Administration
-->Oracle Administration Assistant for Windows NT
oracle instance 'startup/shutdown options'

Installation of CS6 Web & Design Premium in Windows Multipoint Server 2011

Hi all,
I am trying to install CS6 Web & Design Premium in Windows Multipoint Server 2011.
But I am always getting the PDApp.exe crash message and can't even get into the installation wizard.
Can anyone help me in resolving this problem?
Actually I have tried to install it in normal mode or maintenance mode with UAC switched off already.
In addition to this, can CS6 Web & Design Premium support Windows Multipoint Server 2011?
The information for PDApp.exe crash is listed as follow:
問題簽章:
問題事件名稱:          APPCRASH
應用程式名稱:          PDApp.exe
應用程式版本:          7.0.0.189
應用程式時間戳記:          50c9a261
錯誤模組名稱:          KERNELBASE.dll
錯誤模組版本:          6.1.7601.18015
錯誤模組時間戳記:          50b83c8a
例外狀況代碼:          000006ba
例外狀況位移:          0000c41f
作業系統版本:          6.1.7601.2.1.0.16.56
地區設定識別碼:          3076
其他資訊 1:          95cf
其他資訊 2:          95cffe8a8dd0881229d8c1aa042bcd57
其他資訊 3:          6a3c
其他資訊 4:          6a3c6b3c38ebfac38d8be3e4a483fbe3
閱讀我們的線上隱私權聲明:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0c04
Please let me know if more information is needed and I am willing to provide any information you need.
Thanks very much for all your help. Really thanks!
John

Desktop products are generally not supported on server operating systems. That's all you will ever hear about the matter. That being so, you shouldn't expect anyone to have any answers for you. It's simply an exotic scenario and very few people, if any at all, will even have bothered to try.
Mylenium

Got an error when install oracle 9i in linux 9 in windows virtual server

Hi Guys,
I am installing an oracle 9i in my laptop that is linux 9 server which is hosted in windows virtual server. when I ran runInstaller, I got an eror that is can't connect x11 windows server using........ When I ran xterm, I got can't open dispaly. xhost + also dosn't work. Is that ok that I can install oracle in a linux that is installed in windows virtual server? What value can I set to DISPLAY value?
Thank in advance.

Linux 9? You mean the one that was end-of-lifed in 2004? (Just checking ...)
If yes, you gotta decide whether it's the 'Linux 9 Boxed Version' or the 'Linux 9 Download Version'. The two have completely different compiler and glibc packages that are incompatible. Fix that incompatibility - relative to Oracle's needs - and you will be able to make Oracle9i limp along.

Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

Hi all,
I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
this same errors in "Asset Details":
USER Message ID
Status type Description
NT\AUTHORITY\SYSTEM 1006
Error 3003
I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
(5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)?
Thank you.

I see in fodler with CU3 updates, are four packages:
- SP1 Cumulative update 3 - x64 client update
- SP1 Cumulative update 3 - x86 client update
- SP1 Cumulative update 3 - server update
- SP1 Cumulative update 3 - console update
It will be stupid but... maybe I should deploy x64 client update package?

Installation Oracle Client 8.1.7 on Windows NT Server

Similar Messages

Maybe you are looking for