Installation Oracle Management Agent 11g in Linux

Hi,
I am Arun From India..
I am planning to Install Oracle management Agent 11g in a Linux (5.5 32-bit) Server...But I saw many methods in Website to Install........
Please help me to select the Easy method to Install Oracle Management Agent and Please bring the document to Install Management Agent......
Could you specify how can we Configure the DATABASE with AGENT.....?????????????
Please help me........Hope your Support........
Arun Kurungatt

Hi slatterych,
Thanks for your Valuable Support and Comments...I have some Doubts before Installation.
I am going to Install Agent on Server-2 , which contains Oracle DB 11g only now ( No Grid Control )..So What are the Things I need to perform in Server-2 while installing Agent (Silent mode)??? Is That same like which you Sent???
Already I have Installed OEMGC in Server-1.. How can I connected Agent from Server-2 to OEMGC (Server-1)????
Should I add OMS details of Server-1 in additional_agent.rsp ( Server-2 ) before installing Agent????
Hope your Support...Please
Arun Kurungatt

Similar Messages

Installing oracle management agent 12.1.0.2.0 in silent mode.

version: 12.1.0.2.0
platform: IBM Aix power systems 64bit
I installed the oracle management service along with the oracle management agent that comes along with the the first installation. I deinstalled the first installed OMA and tried to install it again using the silent install mode with the response file.
(oms host and the oma host are the same)
among the 3 modes of silent install described in the installation guide, i used agent deploy method.
Here are the steps i followed with the install
1. this the status of my OMS
<oracle>chh-aix-beta/oem12c/product/oms/bin> ./emctl status oms -details
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Enter Enterprise Manager Root (SYSMAN) Password :
Console Server Host        : chh-aix-beta
HTTP Console Port          : 7788
HTTPS Console Port         : 7799
HTTP Upload Port           : 4889
HTTPS Upload Port          : 1159
EM Instance Home           : /oem12c/product/gc_inst/em/EMGC_OMS1
OMS Log Directory Location : /oem12c/product/gc_inst/em/EMGC_OMS1/sysman/log
OMS is not configured with SLB or virtual hostname
Agent Upload is locked.
OMS Console is unlocked.
Active CA ID: 1
Console URL: https://chh-aix-beta:7799/em
Upload URL: https://chh-aix-beta:1159/empbs/upload
WLS Domain Information
Domain Name      : GCDomain
Admin Server Host: chh-aix-beta
Managed Server Information
Managed Server Instance Name: EMGC_OMS1
Managed Server Instance Host: chh-aix-beta
WebTier is Up
Oracle Management Server is Up2. I got the version and the platform info of the oms by doing the following
<oracle>chh-aix-beta/oem12c/product/oms/bin> ./emcli get_supported_platforms
Getting list of platforms ...
Check the logs at /oem12c/product/gc_inst/em/EMGC_OMS1/sysman/emcli/setup/.emcli/agent.log
About to access self-update code path to retrieve the platforms list..
Getting Platforms list ...
Version = 12.1.0.2.0
Platform = IBM AIX on POWER Systems (64-bit)
Platforms list displayed successfully.3. I downloaded the management agent software by doing the following ()
$<OMS_HOME>/bin/emcli get_agentimage -destination=/oem12102 -platform="IBM AIX on POWER Systems (64-bit) " -version=12.1.0.2.04. I unzipped the management agent software.
5. I edited the response file as follows. (i edited only the oms_host, em_upload_port, agent_registration_password, since they are the only ones that are mandatory)
OMS_HOST=172.16.24.65
EM_UPLOAD_PORT=1159
AGENT_REGISTRATION_PASSWORD=cchorcl01
#AGENT_INSTANCE_HOME=
#AGENT_PORT=
b_startAgent=true
#ORACLE_HOSTNAME=
#s_agentHomeName=
EM_INSTALL_TYPE="AGENT"6. then i ran the AgentDeploy.sh script using the following.
./agentDeploy.sh -ignorePrereqs AGENT_BASE_DIR=/oem12c/base/agent RESPONSE_FILE=/oem12102/agent.rsp(I ignored the prereqs because, i was getting an error with the hostname and the hostname is correct)
7. this the following output i am getting after running step 6.
-e Validating the OMS_HOST & EM_UPLOAD_PORT
Executing command : /oem12c/base/agent/core/12.1.0.2.0/jdk/bin/java -classpath /oem12c/base/agent/core/12.1.0.2.0/jlib/agentInstaller.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/OraInstaller.jar oracle.sysman.agent.installer.AgentInstaller /oem12c/base/agent/core/12.1.0.2.0 /oem12102 /oem12c/base/agent -prereq
Validating oms host & port with url: http://172.16.24.65:1159/empbs/genwallet
Validating oms host & port with url: https://172.16.24.65:1159/empbs/genwallet
Return status:3
Unzipping the agentcoreimage.zip to /oem12c/base/agent ....
12.1.0.2.0_PluginsOneoffs_212.zip
Executing command : /oem12102/unzip -o /oem12102/12.1.0.2.0_PluginsOneoffs_212.zip -d /oem12c/base/agent
Executing command : /oem12c/base/agent/core/12.1.0.2.0/jdk/bin/java -d64 -classpath /oem12c/base/agent/core/12.1.0.2.0/oui/jlib/OraInstaller.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/xmlparserv2.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/srvm.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/emCfg.jar:/oem12c/base/agent/core/12.1.0.2.0/jlib/agentInstaller.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/share.jar oracle.sysman.agent.installer.AgentInstaller /oem12c/base/agent/core/12.1.0.2.0 /oem12102 /oem12c/base/agent /oem12c/base/agent/agent_inst AGENT_BASE_DIR=/oem12c/base/agent -ignorePrereqs AGENT_BASE_DIR=/oem12c/base/agent RESPONSE_FILE=/oem12102/agent.rsp
Cloning the agent home...
Executing command: /oem12c/base/agent/core/12.1.0.2.0/oui/bin/runInstaller -ignoreSysPrereqs -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/oem12c/base/agent/core/12.1.0.2.0 -responseFile /oem12102/agent.rsp AGENT_BASE_DIR=/oem12c/base/agent AGENT_BASE_DIR=/oem12c/base/agent RESPONSE_FILE=/oem12102/agent.rsp -noconfig ORACLE_HOME_NAME=agent12c3 -force b_noUpgrade=true AGENT_PORT=-1
Clone Action Logs Location:/software/oracle/logs/cloneActions<timestamp>.log
Cloning of agent home completed successfully
Attaching sbin home...
Executing command: /oem12c/base/agent/core/12.1.0.2.0/oui/bin/runInstaller -ignoreSysPrereqs -attachHome -waitForCompletion -nowait ORACLE_HOME=/oem12c/base/agent/sbin ORACLE_HOME_NAME=sbin12c3 -force
Attach Home Logs Location:/oem12c/base/agent/core/12.1.0.2.0/cfgtoollogs/agentDeploy/AttachHome<timestamp>.log
Attach home for sbin home completed successfully.
Updating home dependencies...
Executing command: /oem12c/base/agent/core/12.1.0.2.0/oui/bin/runInstaller -ignoreSysPrereqs -updateHomeDeps -waitForCompletion HOME_DEPENDENCY_LIST={/oem12c/base/agent/sbin:/oem12c/base/agent/core/12.1.0.2.0,} -invPtrLoc /oem12c/base/agent/core/12.1.0.2.0/oraInst.loc -force
Update Home Dependencies Location:/oem12c/base/agent/core/12.1.0.2.0/cfgtoollogs/agentDeploy/UpdateHomeDeps<timestamp>.log
ERROR: Update home dependency failed.I am getting stuck at updating home dependencies. I dont know what that means. If you have faced similar problems while installing oracle management agent please do share your solution. if you need more info please let me know.

All these commands are run on the host (hostname=chh-lpar20) where the agent is being installed, and these commands are run as root user.
ifconfig -a
en0: flags=5e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN>
        inet 172.16.28.222 netmask 0xfffffc00 broadcast 172.16.31.255
         tcp_sendspace 131072 tcp_recvspace 65536 rfc1323 0
lo0: flags=e08084b,c0<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,LARGESEND,CHAIN>
        inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
        inet6 ::1%1/0
         tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1ping chh-lpar20
PING chh-lpar20: (172.16.28.222): 56 data bytes
64 bytes from 172.16.28.222: icmp_seq=0 ttl=255 time=0 ms
64 bytes from 172.16.28.222: icmp_seq=1 ttl=255 time=0 msnslookup chh-lpar20
Server:         172.16.29.213
Address:        172.16.29.213#53
** server can't find chh-lpar20: NXDOMAINnslookup 172.16.28.222
Server:         172.16.29.213
Address:        172.16.29.213#53
** server can't find 222.28.16.172.in-addr.arpa: NXDOMAINto check the if the port 3872 and 1830-1849 are free I ran the follwoing command
./agentDeploy.sh -prereqOnly AGENT_BASE_DIR=/oem12102/base/agent
this was the result i got inregards to the ports
Check complete: Passed
========================================================
Performing check for PortCheck
Checking for port availability and hostname validity...
Trying for host : chh-lpar20/172.16.28.222 and port : 3872
Trying for host : chh-lpar20/192.168.12.23 and port : 3872
Port= 3872 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1830
Trying for host : chh-lpar20/192.168.12.23 and port : 1830
Port= 1830 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1831
Trying for host : chh-lpar20/192.168.12.23 and port : 1831
Port= 1831 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1832
Trying for host : chh-lpar20/192.168.12.23 and port : 1832
Port= 1832 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1833
Trying for host : chh-lpar20/192.168.12.23 and port : 1833
Port= 1833 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1834
Trying for host : chh-lpar20/192.168.12.23 and port : 1834
Port= 1834 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1835
Trying for host : chh-lpar20/192.168.12.23 and port : 1835
Port= 1835 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1836
Trying for host : chh-lpar20/192.168.12.23 and port : 1836
Port= 1836 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1837
Trying for host : chh-lpar20/192.168.12.23 and port : 1837
Port= 1837 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1838
Trying for host : chh-lpar20/192.168.12.23 and port : 1838
Port= 1838 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1839
Trying for host : chh-lpar20/192.168.12.23 and port : 1839
Port= 1839 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1840
Trying for host : chh-lpar20/192.168.12.23 and port : 1840
Port= 1840 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1841
Trying for host : chh-lpar20/192.168.12.23 and port : 1841
Port= 1841 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1842
Trying for host : chh-lpar20/192.168.12.23 and port : 1842
Port= 1842 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1843
Trying for host : chh-lpar20/192.168.12.23 and port : 1843
Port= 1843 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1844
Trying for host : chh-lpar20/192.168.12.23 and port : 1844
Port= 1844 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1845
Trying for host : chh-lpar20/192.168.12.23 and port : 1845
Port= 1845 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1846
Trying for host : chh-lpar20/192.168.12.23 and port : 1846
Port= 1846 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1847
Trying for host : chh-lpar20/192.168.12.23 and port : 1847
Port= 1847 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1848
Trying for host : chh-lpar20/192.168.12.23 and port : 1848
Port= 1848 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1849
Trying for host : chh-lpar20/192.168.12.23 and port : 1849
Port= 1849 is busy.
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: Either port is unavailable or hostname configuration is not valid.
Recommendation: Make sure the port is available and the hostname configuration i
s proper.I don't know what to make of the results I got for executing the nslookup command.

EM Cloud 12c Management Agent Software for linux x86

Hello folks
I need to acquire Management Agent Software for linux x86 using offline mode. I followed steps described in online documentation of Oracle Cloud Control 12c, section "4.2.3.2 Acquiring Management Agent Software in Offline Mode"
I downloaded the catalog file p9348486_112000_Generic.zip, but when I executed import_update_catalog as follow:
/em12c/oms12cr3/oms/bin/emcli import_update_catalog -file=/app/em12c/swlib/p9348486_112000_Generic.zip -omslocal
this error apears:
"Internal error while validating catalog file format: error in opening zip file"
thanks in advance

--> $/AGENT_INST/bin/emctl stop agent
If agent does not shutdown gracefully then kill all agent background processes by first grepping for agent perl and java processes only
--> Move your existing target.xml file
mv target.xml target.xml.old
--> Create an empty targets.xml file under /AGENT_INST/sysman/emd with the below content
<Targets>
</Targets>
--> Start the agent
$AGENT_INST/bin/emctl start agent
This starts agent but without any targets populated in targets.xml
To discover targets perform agent resynchronization operation from console
Regards
Krishnan

Oracle Management Agent 10.2.0.5 64-bit Solaris

I am installing Oracle Management Agent 10.2.0.5 on Solaris box. It has been installed successfuly on box1 and on box2 it is giving me error message
"Error in invoking target tnsping nnfgt.o mkldflags client_sharedlib of makefile". I am wondering both boxes box1 and box2 are identical and why I am getting error on box2. Help me please.

I have already gone through that document
Box1 got following output: On this box Agent Insalled successfuly
/usr/ccs/bin/ld -V
ld: Software Generation Utilities - Solaris Link Editors: 5.10-1.490
Box2 got following output: On this box getting above error message
/usr/ccs/bin/ld -V
ld: Software Generation Utilities - Solaris Link Editors: 5.10-1.482
As per MOS Doc 463826.1 output looks OK to me only last number are different and I believe it should not make any big difference.

Packages error while installing Oracle Management Agent.

Hi,
We have configured the oracle grid on our production server.
Now we also want to include all other database on situated on different server.
So we are installing oracle management agent software.
while installiing this software we encounterd following error:
Exception in thread "main" java.lang.Unsatisfied LinkError :/tmp/OraInstall2011-05-04_10-05-58PM /jre/1.4.2/lib/i386/libawt.so :libXp.so.6 :cannot open shared object file:
No such file or directory.
Please help me as this is urgent.
Regards,
Milan

You need to install libXp package.
The rpm which contains this package is libXp-1.0.0-8.i386.rpm. It is located in the /server direrctory of the OS install DVD. You copy this rpm from the DVD and install it using
# rpm -ivh libXp-1.0.0-8.i386.rpm
or if you have setup yum or up2date repository:
yum install libXp.i386

Installing Oracle Management Agent in 11g database(11.2.0.3)

Hi,
Error occurred, While installing the agent in 11g database.
Error is listed below
[oracle@grid agent]$./agentDeploy.sh AGENT_BASE_DIR=/ebiz/oracle RESPONSE_FILE= agent.rsp
AGENT_BASE_DIR=/ebiz/oracle
Validating the OMS_HOST & EM_UPLOAD_PORT
Executing command : /ebiz/oracle/core/12.1.0.1.0/jdk/bin/java -classpath /ebiz/o racle/core/12.1.0.1.0/jlib/agentInstaller.jar:/ebiz/oracle/core/12.1.0.1.0/oui/j lib/OraInstaller.jar oracle.sysman.agent.installer.AgentInstaller /ebiz/oracle/c ore/12.1.0.1.0 /tmp/agent /ebiz/oracle -prereq
Validating oms host & port with url: http://prime.4iapps.com:7801/empbs/genwalle t
Validating oms host & port with url: https://prime.4iapps.com:7801/empbs/genwall et
Return status:3
Unzipping the agentcoreimage.zip to /ebiz/oracle ....
12.1.0.1.0_PluginsOneoffs_226.zip
Executing command : /ebiz/oracle/core/12.1.0.1.0/jdk/bin/java -classpath /ebiz/o racle/core/12.1.0.1.0/oui/jlib/OraInstaller.jar:/ebiz/oracle/core/12.1.0.1.0/oui /jlib/xmlparserv2.jar:/ebiz/oracle/core/12.1.0.1.0/oui/jlib/srvm.jar:/ebiz/oracl e/core/12.1.0.1.0/oui/jlib/emCfg.jar:/ebiz/oracle/core/12.1.0.1.0/jlib/agentInst aller.jar:/ebiz/oracle/core/12.1.0.1.0/oui/jlib/share.jar oracle.sysman.agent.in staller.AgentInstaller /ebiz/oracle/core/12.1.0.1.0 /tmp/agent /ebiz/oracle AGEN T_BASE_DIR=/ebiz/oracle AGENT_BASE_DIR=/ebiz/oracle RESPONSE_FILE=agent.rsp
Executing agent install prereqs...
Executing command: /ebiz/oracle/core/12.1.0.1.0/oui/bin/runInstaller -ignoreSys rereqs -prereqchecker -silent -ignoreSysPrereqs -waitForCompletion -prereqlogl c /ebiz/oracle/core/12.1.0.1.0/cfgtoollogs/agentDeploy -entryPoint oracle.sysma .top.agent_Complete -detailedExitCodes PREREQ_CONFIG_LOCATION=/ebiz/oracle/core 12.1.0.1.0/prereqs -J-DORACLE_HOSTNAME=grid.4iapps.com -J-DAGENT_BASE_DIR=/ebi /oracle
Prereq Logs Location:/ebiz/oracle/core/12.1.0.1.0/cfgtoollogs/agentDeploy/prere <timestamp>.log
Agent install prereqs completed successfully
Cloning the agent home...
Executing command: /ebiz/oracle/core/12.1.0.1.0/oui/bin/runInstaller -ignoreSys rereqs -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/ebiz/ racle/core/12.1.0.1.0 -responseFile agent.rsp AGENT_BASE_DIR=/ebiz/oracle AGEN BASEDIR=/ebiz/oracle RESPONSE_FILE=agent.rsp -noconfig ORACLE_HOME_NAME=agen 12c1 -force
Clone Action Logs Location:/ebiz/oracle/app/oraInventory/logs/cloneActions<time tamp>.log
ERROR: Agent Clone Failed
[oracle@grid agent]$
Kindly guide me to install agent on 11g database
Thanks & Regards
Kesavan G

Hi,
I have listed the logfiles details for your reference,
-scratchPath
/tmp/OraInstall2013-05-05_11-57-48AM
-sourceType
network
-timestamp
2013-05-05_11-57-48AM
-ignoreSysPrereqs
-clone
-forceClone
-silent
-waitForCompletion
-nowait
ORACLE_HOME=/ebiz/oracle/core/12.1.0.1.0
-responseFile
agent.rsp
AGENT_BASE_DIR=/ebiz/oracle
AGENT_BASE_DIR=/ebiz/oracle
RESPONSE_FILE=agent.rsp
-noconfig
ORACLE_HOME_NAME=agent12c1
-force
INFO: Environment Variables:
INFO: ORACLE_HOME = /ebiz/oracle/core/12.1.0.1.0
INFO: PATH = /ebiz/oracle/app/oracle/product/11.2.0/dbhome_1/bin:/bin:/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
INFO: CLASSPATH =
INFO: Username:oracle
INFO: Install area Control created with access level 1
INFO: Oracle Universal Installer version is 11.1.0.9.0
INFO: OUI-10203:The specified response file 'agent.rsp' is not found. Make sure that the response file specified exists and you have read privileges to this file.
Thanks $ Regards
Kesavan G

How to install Oracle Grid Agent 11g into windows hosts ?

Hi there, I was not able to deploy management agents into windows hosts machines !
I followed steps below and I am getting these errors :
On windows 2003 server, I have downloaded grid agent here :
D:\grid\Windows_X64_Grid_Control_agent_download_11_1_0_1_0\windows_x64\agent
I have setup.exe file ! When I double click it, I got this message :
Only silent installation is supported search help.
Well, I did a lot of times setup.exe -silent -responseFile <path>additional_response.rsp and the setup process tells me that I am not following the security procedures.
I am newbie on Grid!
I don´t want deploy agent using deployment wizard due to security resctrictions, they do not allow openssh servers on windows servers.
Have you guys succeeded with this installation ? I mean, install fresh agent on single target windows server machine!
I would appreciate any help.
Tks.
Edson - CLARO

Edson,
what I would do is go for the cloning option.
On the OMS Server an Agent has been installed as part of the OMS installation.
Stop this Agent
AGENT_HOME/bin/emctl stop agent
Create a zip file from the agent11g folder
Copy it to a server where you want to install the Agent
unzip the folder in the location where you want to install
Restart the Agent you had stopped on your OMS server
AGENT_HOME/bin/emctl start agent
On the destination server
Then from the AGENT_HOME/oui/bin
runInstaller -clone -forceClone ORACLE_HOME=<full path of Agent Folder> ORACLE_HOME_NAME=OracleHomeAgent11g -noconfig -silent b_chainedInstall=false oracle.sysman.top.agent:s_installType=AGENT
Then from AGENT_HOME/bin/agentca -f
AGENT_HOME/root.sh (Under Unix this needs to be run as user root, not sure if this procedure is the same under Windows)
This is based on the procedure described in MOS note : How to Clone a Management Agent And Known Issues [ID 579156.1] which referes to a 10.2.0 Agent, but I have been able to use this procedure under Windows with a 11.1 Agent as well.
Goodluck
Regards
Rob
http://oemgc.wordpress.com

Oracle forms builder 11g on linux

I OPEN A FMB WITH FORMS BUILDER 11G ON SUSE LINUX BUT THE PROGRAM UNITS(PROCEDURES,FUNCTIONS AND TRIGGERS) ARE CORRUPT.
DOES ANYBODY KNOW SOMETHING ABOUT THIS PROBLEM?
Edited by: user2297343 on 30 Οκτ 2009 6:22 πμ

Do you have metalink access? If so read note 969422.1 as this sounds exactly like your problem.
Basically it's a problem with the NLS_LANGUAGE you are using (basing on some cyrillic characters in your "edited by" text I am assuming you are using a russian nls_language).
also please turn off your caps lock ;)
cheers

After installation Oracle BI EE 11g

hello every bady and happy new year
I finished installing OBIEE 11g in my computer (Windows seven) and after reboot my system, i can no longer access the application (http://my-pc:9503/analytics).
I start the service BI and i access in webLogic server console (http://my-pc:7002/console) but i not can access the application for OBIEE !
You have ideas for solving this problem ?
Thank you and excuse my English

Thank you daan for your quick response :)
i have 2 problemes :
1 :
when i run : Cd <MIDDLEWARE_HOME>\wlserver_10.3\server\bin>startNodeManager.cmd
for "Start NodeManager" i have an error in command shell :
<SEVERE> <Fatal error in node manager server>
java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
at java.net.PlainSocketImpl.socketBind.<Native Method>
and
GRAVE: Fatal error in node manager server
java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
at java.net.PlainSocketImpl.socketBind.<Native Method>
2 :
when i run : Cd <MIDDLEWARE_HOME>\instances\instance1\bin>opmnctl startall
for "start the OBIEE components" i have this error :
Error
Process <index=1,uid=**,pid=**>
failed to start a managed process after the maximum retry limit
Log:
none
I'm stuck on.....!!!!!!!!

Error at Creat asinstance When installing oracle forms 11g on linux

Hello all experts!!!,
i am installing oracle weblogic forms 11g on linux platform and i am getting error at Create as instance step.
components selected :--
forms ,reports,form builder report builder enterprise manager
OS Platform :-- Oracle Enterprise Linux 5.3 and also same error on Fedora Core 13
i have also Oracle Database 11g R2 installed on same machine.
the log says :---
[2010-09-13T12:55:38.831+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 55] [ecid: 0000Ig9xHTOFw000jzwkno1CZRTb00000i,0] [[
oracle.as.config.ProvisionException: Unable to validate NonJ2EEManagement Application deployment on admin server.
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:678)
at oracle.as.config.impl.RuntimeServiceConnection.deployIfNecessary(RuntimeServiceConnection.java:192)
at oracle.as.config.impl.OracleASInstanceImpl.create(OracleASInstanceImpl.java:92)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:249)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:215)
at oracle.as.install.classic.ca.standard.StandaloneTool.execute(StandaloneTool.java:50)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.config.utl.DeployerException: NonJ2EEManagement Applicationdeployment failed.
at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:95)
at oracle.as.config.utl.Deployer.deploy(Deployer.java:52)
at oracle.as.config.impl.RuntimeServiceConnection.deployNonj2eeApplication(RuntimeServiceConnection.java:219)
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:670)
... 21 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:93)
... 24 more
Caused by: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
at weblogic.Deployer.run(Deployer.java:72)
... 29 more
Caused by: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
at weblogic.deploy.api.tools.deployer.Jsr88Operation.report(Jsr88Operation.java:541)
at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:140)
at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.Deployer.run(Deployer.java:70)
... 29 more
[2010-09-13T12:55:38.838+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 55] [ecid: 0000Ig9xHTOFw000jzwkno1CZRTb00000i,0] Exit code from OPMNAdmin : 0
[2010-09-13T12:55:38.844+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 55] [ecid: 0000Ig9xHTOFw000jzwkno1CZRTb00000i,0] [[
oracle.as.provisioning.engine.CfgWorkflowException
at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:178)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:215)
at oracle.as.install.classic.ca.standard.StandaloneTool.execute(StandaloneTool.java:50)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.util.ConfigException:
Error creating ASInstance asinst_1.
Cause:
An internal operation has failed: Unable to validate NonJ2EEManagement Application deployment on admin server.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:317)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
... 17 more
Caused by: oracle.as.config.ProvisionException: Unable to validate NonJ2EEManagement Application deployment on admin server.
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:678)
at oracle.as.config.impl.RuntimeServiceConnection.deployIfNecessary(RuntimeServiceConnection.java:192)
at oracle.as.config.impl.OracleASInstanceImpl.create(OracleASInstanceImpl.java:92)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:249)
... 18 more
Caused by: oracle.as.config.utl.DeployerException: NonJ2EEManagement Applicationdeployment failed.
at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:95)
at oracle.as.config.utl.Deployer.deploy(Deployer.java:52)
at oracle.as.config.impl.RuntimeServiceConnection.deployNonj2eeApplication(RuntimeServiceConnection.java:219)
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:670)
... 21 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:93)
... 24 more
Caused by: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
at weblogic.Deployer.run(Deployer.java:72)
... 29 more
Caused by: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
at weblogic.deploy.api.tools.deployer.Jsr88Operation.report(Jsr88Operation.java:541)
at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:140)
at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.Deployer.run(Deployer.java:70)
... 29 more
weblogic server installation is perfect no errors at all.
i also got the errors i got during installation ( im_emagent.mk and while running command gcc) . but thanks to OTN Forums i had managed to find out a fix. but on this error only solution i got is
TRY WINDOWS . but what about linux then? is there any solution on this error?
i am not much used to front-end ( java i mean). i am Oracle DBA Actually n want to install n try Weblogic
Kindly Help...

You can just copy the relevant parts (the ones marked with error). You can also look at the timing
when it happened the reports environment did not start.
From what i remember this could be a memory issue, standard every managed server (WLS_FORMS and WLS_REPORTS) instance
is configured with 1024m bytes of memory.
What we did is first install a forms instance and after that a reports instance. After the forms installation we adjusted the
memory parameters in setWLSEnv (<middleware-home>/user_projects/domains/<domain-name>/bin). Look in this file
for references to WLS_FORMS (something similar to: if [ "${SERVER_NAME}" = "WLS_FORMS" ] ; then).
Another thing which springs to my mind is, which products did you select. If you just want Forms and Reports
you can select just the following:
- Oracle Forms
- Oracle Reports
- Developer Tools aan.
- Management Components
- Oracle HTTP Server
and deselect the other options:
- Oracle Portal
- Oracle Discoverer
- Oracle WebCache
- Clustered (if you are not using clustering)
We also had to fix the following files (i do not think that you have to do this since your Forms did not show any problems):
- (On Windows) Copy the file msvcr71.dll (FMW/windows/extra) to WINDOWS/system32.
- Copy the file mod_wl_ohs.so (FMW/<operating-system>/extra) to <middleware-home>/as_1/ohs/modules.

Unable to start Oracle DataBase 11g on Linux machine

Hi friends,
Issue : NOT able to start the Oracle Data Base 11g on Linux machine
I've successfully installed Oracle-DB-11g on my Linux machine.
Note : I haven't declared or exported any variable(s) , actually I'm not sure how and where to do this.
Can someone look into my issue , and please let me know if i have to export any variables and how/where?
Thanks

Hi;
You need to set your env. or put them in .bash_profile file
Please see
http://www.oracle-base.com/articles/11g/oracle-db-11gr2-installation-on-oracle-linux-5.php << section Additional Setup
Regard
Helios

Installation Issues for Management Agent on AIX

I am having installation issues with Oracle Management Agent Install using OUI....
I have done the following:
i)     download AIX_Grid_Control_agent_download_10_2_0_1.zip to aix machine.
ii)     unzip , it creates aix directory.
iii)     unzip "oui_aix.jar " , which is available under aix/oui/
iv)     pl unjar "oui_aix.jar " , ( jar -xvf oui_aix.jar )
v)     set AGENT_HOME=/oracle/WD1/oem/
vi)     chmod –R 777 * from /oracle/WD1/oem/
vii)     invoke ./runInstaller from aix/oui/Disk1/
When I invoke runInstaller it asks me for Additional Management Service install but after first screen does check ask Oracle Home and then goes intsall OUI and never asks for OMS and OMS port etc..
Can I install the Management agent through OUI... What are the steps ?
Thanks,
Atul

I deinstalled the OUI and again re-installed.. but still I cannot get it working.. That is why I was looking that if somebody came accross the same issue... Why it does not ask the OMS page at all.. If some body has installed Management Agent on AIX through OUI pl. respond.
Thanks
Atul

How many Management agents can you have running simultaneously on a host?

Hi all,
I've scoured the Oracle documentation and not been able to find a definitive answer to this question, how many Oracle management agents can you have on a single managed host target? Can you for example run an 11g agent and a 12c agent simultaneously (whilst migrating to 12c without upgrading the present OEM instance) If so can you run two 12c agents, each pointing to a different OMS? I’ve seen examples of an agent for each database instance on a host managed target, so a host with three Oracle database instances has three Oracle Management agents all pointing to the same OMS with each agent is monitoring just one of the database instances. There must be resource considerations here for memory, cpu and network traffic etc? I’ve always understood it to be one Oracle Management Agent per managed host
Thanks

I don't think there's any data on impact or performance since it's not a recommended configuration. If you have host/configuration monitoring enabled on both agents, they will be running the same queries/scripts against the host/inventory, etc. so they will likely have contention at some point. If you monitor the same databases, you will definitely see contention and increased overhead as there will be multiple agents running the same queries. You might also see problems w/ any of the server generated alerts (tablespace, etc) if you change thresholds as the agents send that to the database, and then the database will be out of sync with the other agents.
What exactly is the goal for having multiple agents? Is it short term or long term?

Problem with the install of 11.1.0.1.0 Management Agent in silent mode

I have a server with the operation system windows 2003 and a installation WeblogicServer 10.3.2.
Now I like install the managemant agent for Grid Control on this server.
I use silent installation, because the in 11.1.0.1.0 Grid Control no longer supports a GUI-based OUI installation of the agent. (Reference : Master Note for Grid Control 11.1.0.1.0 Installation and Upgrade).
But the silent installation is not sucessfully.
I get following errors in the logfile:
oracle.sysman.oii.oiii.OiiiInventoryDoesNotExistException: Der Speicherort für den Bestandszeiger C:\Programme\Oracle\Inventory kann entweder nicht gelesen werden oder ist nicht vorhanden.
     at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1763)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:292)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:231)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:180)
     at oracle.sysman.install.oneclick.EMGCGetUpgradeableHomes.initInventorySession(EMGCGetUpgradeableHomes.java:401)
     at oracle.sysman.install.oneclick.EMGCGetUpgradeableHomes.getHomes(EMGCGetUpgradeableHomes.java:113)
     at oracle.sysman.install.oneclick.EMGCGetUpgradeableHomes.getInstance(EMGCGetUpgradeableHomes.java:103)
     at oracle.sysman.install.oneclick.EMGCUpgradeSelection.m_createupgradeTblSCrollPane(EMGCUpgradeSelection.java:252)
     at oracle.sysman.install.oneclick.EMGCUpgradeSelection.m_createMainPanel(EMGCUpgradeSelection.java:151)
     at oracle.sysman.install.oneclick.EMGCUpgradeSelection.<init>(EMGCUpgradeSelection.java:109)
     at oracle.sysman.install.oneclick.EMGCUpgradeSelection.getInstance(EMGCUpgradeSelection.java:123)
     at oracle.sysman.install.oneclick.EMGCWizardFlow.<init>(EMGCWizardFlow.java:315)
     at oracle.sysman.install.oneclick.EMGCWizardFlow.getInstance(EMGCWizardFlow.java:527)
     at oracle.sysman.install.oneclick.EMGCWizardFlow.main(EMGCWizardFlow.java:1103)
     at oracle.sysman.install.oneclick.EMGCInstaller.main(EMGCInstaller.java:1044)
ERROR: ERROR: E-Mail-Adresse nicht angegeben
ERROR: Vollautomatische Installation nicht erfolgreich. Weitere Informationen finden Sie im Log.
Can everybody help me?
Petra

Hi,
the directory c:\Programme\Oracle\Inventory exist.
I haven't no further files, in which informations for the silent installation are logged.
I think, the error "ERROR: ERROR: E-Mail-Adresse nicht angegeben" is the actual problem, but I don't like give the e-mail-adress,
because I use following command for the installation:
D:\>D:\oas_stage\GridControlAgent_111010\Win32_Grid_Control_agent_download_11_1_0_1_0\win32\agent\setup.exe -silent -responseFile D:\oas_stage\GridControlAgent_
111010\Win32_Grid_Control_agent_download_11_1_0_1_0\win32\agent\additional_agent.rsp -invPtrLoc C:\Programme\Oracle\Inventory
The contents of the additional_agent.rsp is following:
## copyright (c) 1999, 2010 Oracle. All rights reserved. ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## Each variable is associated with a comment. The comment ##
## identifies the variable type. ##
## Please specify the values in the following format: ##
## Type Example ##
## String "Sample Value" ##
## Boolean True or False ##
## Number 1000 ##
## StringList {"String value 1","String Value 2"} ##
## The values that are given as <Value Required> need to be ##
## specified for a silent installation to be successful. ##
## This response file is generated by Oracle Software ##
## Packager. ##
RESPONSEFILE_VERSION=2.2.1.0.0
#Inputs for Oracle Configuration Manager
#SECURITY_UPDATES_VIA_MYORACLESUPPORT:<Boolean> Whether security updates are reqi-
# uired via My Oracle Support
#DECLINE_SECURITY_UPDATES:<Boolean> Whether security updates should be declined.
#MYORACLESUPPORT_USERNAME & MYORACLESUPPORT_PASSWORD:<String> User name and passw-
# ord for My Oracle Support access, these will be effected only when SECU-
# RITY_UPDATES_VIA_MYORACLESUPPORT=true
#COLLECTOR_SUPPORTHUB_URL:<String> If there is not direct connection and Support
# hub is deployed. Need to specify that URL.
SECURITY_UPDATES_VIA_MYORACLESUPPORT=False
DECLINE_SECURITY_UPDATES=False
#[email protected]
#MYORACLESUPPORT_PASSWORD=no
#COLLECTOR_SUPPORTHUB_URL=<Value Unspecified>
#PARAMETERS FOR SOFTWARE UPDATES
#INSTALL_UPDATES_SELECTION:<String>
# Option 1. If you want to skip the software updates, provide
# INSTALL_UPDATES_SELECTION="skip"
# Option 2. If you have already downloaded the updates then provide
# INSTALL_UPDATES_SELECTION="staged"
# If you choose the Option 2 then make sure you also provide STAGE_LOCATION.
#STAGE_LOCATION:<String> Stage location for software updates. It will be effected
# only when INSTALL_UPDATES_SELECTION is set to "staged"
INSTALL_UPDATES_SELECTION="skip"
STAGE_LOCATION=<Value Unspecified>
#PROXY DETAILS FOR SECURITY UPDATES/ SOFTWARE UPDATES
#PROXY_USER:<String> User name for proxy access.
#PROXY_PWD:<String> Password for proxy access.
#PROXY_HOST:<String> Server providing proxy access.
#PROXY_PORT:<String> Port for proxy access.
PROXY_USER=<Value Unspecified>
PROXY_PWD=<Value Unspecified>
PROXY_HOST=<Value Unspecified>
PROXY_PORT=<Value Unspecified>
#Various inputs required for Installation and Configuration
#ORACLE_AGENT_HOME_LOCATION:<String> The location of oracle agent home.
#Agent home "agent11g" would be created under the directory specified by
#ORACLE_AGENT_HOME_LOCATION.
ORACLE_AGENT_HOME_LOCATION=D:\Oracle
#DEINSTALL_LIST:<StringList> List of components to be deinstalled during a
# deinstall session.The following choices are available. The value should
# contain only one of these choices.The choices are of the form
# Internal Name, Version : External name. Please use the internal name and
# version while specifying the value.
# oracle.sysman.top.agent, 10.2.0.0.0 : Oracle Management Agent 10.2.0.0.0
# oracle.sysman.top.em_seed, 10.2.0.0.0 : Oracle Enterprise Manager Repository Database 10.2.0.0.0
# oracle.sysman.top.oms, 10.2.0.0.0 : Oracle Enterprise Manager Grid Console 10.2.0.0.0
DEINSTALL_LIST={"oracle.sysman.top.agent","11.1.0.1.0"}
#b_silentInstall:<Boolean> The user should not change this value
#CLUSTER_NODES:<StringList> This variable represents the cluster node names
# selected by the user for installation.
b_silentInstall=true
#CLUSTER_NODES=<Value Unspecified>
#TOPLEVEL_COMPONENT:<StringList> The top level component to be installed in the
# current session.Value should contain only one of the following available
# choices.The choices are of the form Internal Name, Version : External name.
# Please use the internal name and version while specifying the value.
# oracle.sysman.top.agent, 10.3.0.0.0 : Oracle Management Agent 10.3.0.0.0
# Example: TOPLEVEL_COMPONENT = {"oracle.sysman.top.agent","10.3.0.0.0"}
TOPLEVEL_COMPONENT={"oracle.sysman.top.agent","11.1.0.1.0"}
#SELECTED_LANGUAGES:<StringList> Languages in which the components will be installed.
# The following choices are available. The value should contain only one of
# these choices.The choices are of the form Internal Name : External name.
# Please use the internal name while specifying the value.
# en, : English
# de, : German
# es, : Latin American Spanish
# es_MX, : Mexican Spanish
# es_ES, : Spanish
# fr, : French
# fr_CA, : Canadian French
# it, : Italian
# iw, : Hebrew
# ja, : Japanese
# ko, : Korean
# pt_BR, : Brazilian Portuguese
# zh_CN, : Simplified Chinese
# zh_TW, : Traditional Chinese
#Example: SELECTED_LANGUAGES = {"en"}
#SELECTED_LANGUAGES={"en"}
#COMPONENT_LANGUAGES:<StringList> Languages in which the components will be installed.
# The following choices are available. The value should contain only one of
# these choices.The choices are of the form Internal Name : External name.
# Please use the internal name while specifying the value.
# en, : English
# de, : German
# es, : Latin American Spanish
# es_MX, : Mexican Spanish
# es_ES, : Spanish
# fr, : French
# fr_CA, : Canadian French
# it, : Italian
# iw, : Hebrew
# ja, : Japanese
# ko, : Korean
# pt_BR, : Brazilian Portuguese
# zh_CN, : Simplified Chinese
# zh_TW, : Traditional Chinese
#Example: COMPONENT_LANGUAGES = {"en"}
COMPONENT_LANGUAGES={"en"}
#OMS_HOST:<String> OMS host info required to connect to OMS
#OMS_PORT:<String> OMS port info required to connect to OMS
#AGENT_REGISTRATION_PASSWORD:<String> Agent Registration Password needed to
# establish a secure connection to the OMS.
OMS_HOST=sidk-vswo14.smi.sachsen.de
OMS_PORT=4889
AGENT_REGISTRATION_PASSWORD=gc11agent
#s_agentSrvcName:<String> Sets the agent Service Name and this variable can be
# used to overrite the agent service name calculated by the install. This is
# required for only Windows.
# Example:
# s_agentSrvcName = "Oracleagent11gAgent" ; default value
# s_agentSrvcName = "GridAgent"      ; User specified value
#s_agentSrvcName=""
#Please Don't change the values of these variables
#FROM_LOCATION:<String> Complete path to the products.xml.
#b_upgrade:<Boolean> "whether it is Upgrade or not"
#EM_INSTALL_TYPE:<STRING> install type
FROM_LOCATION="../stage/products.xml"
b_upgrade=false
EM_INSTALL_TYPE="AGENT"
Regards Petra

Cloud control 12c and management agent 11.1

Hello everyone!
I have installed oracle cloud control 12c (12.1.0.2) on Win platform.
and it does not have an access to the internet yet.
I have database targets only on Linux hosts. In my case CC does not have approriate Agent software for linux hosts.
So the question is :
How can I configure cloud control with datbases hosts on linux ?
Can I use 11.1 agent software ?
Thanks.

1- For CC 12c you have to use 12c agents. Lower agent versions will not work.
2- A " how to" on downloading agent software and adding it to your OMS can be found here: http://www.gokhanatil.com/2012/03/how-to-download-new-agent-software-for-oracle-cloud-control-12c-in-offline-mode.html
Push the agent to *UX servers: http://www.gokhanatil.com/2011/10/how-to-deploy-oracle-management-agent.html
If you want to push the agent to the Linux servers you have to install CYGWIN on the (Windows) OMS server.
Eric

Installation Oracle Management Agent 11g in Linux

Similar Messages

Maybe you are looking for