Installation ORACLE8i URGENT

On a deux serveurs IBM F50 et F80, on aimerait configurer ces deux serveurs en serveur de donnies et en serveur de deployment, j'aimerais savoir les produits ` installer sur chaque serveur pour avoir ces configurations.
Si quelqu'un peut m'aider, veuillez repondre trhs vite. Merci .

hello,
to use the reports server on the web, you have to have a web-servler (e.g. IIS) and install and configure the Reports Server CGI there. this executable will enable you to submit a job from inside a browser.
the reports server alone is not accessibla from the web.
regards,
the oracle reports team

Similar Messages

  • Congiguring jsps with oracle8i,urgent reply needed

    Beginner for oracle8i ---need ur help
    I have installed oracle8i database server8.1.5 on winNT workstation which has Jserver to run java components.
    Please tell me how to run jsps with oracle8i.
    Ihave written certain jsp files but don't know where to put them and how to start the server to test them.This is an urgent requirement for my client,if anybody can help.
    A great thanks in advance.
    null

    Do you refer to the 9i AS Metadata Repository / iasdb?
    then,
    1) yes, if mid-tier components (like Reports) metadata is stored there
    2) do you consider your apps important?
    Also note that Infra. and Mid-tier installs should be backed up sync'd (both at same time). There is a paper on OTN about this.

  • [b]Can't not run the Oracle Universal Installer (Oracle8.1.7 for Linux) on

    I have a problem when try to install Oracle8i Release 8.1.7 Enterprise Edition on RedHat Linux 7.3. After I do the pre-installation tasks, i enter the command (runs as the oracle user):
    $ /tmp/Disk1/runInstaller
    I wait for the one minute and then nothing is happen. I don't understand the reason why the Oracle Universal Installer can't not display! Please tell me all reasons may be!

    Sorry the Oracle version should be 1.7 not 1.1.7. I downloaded it from the web site. The JRE I downloaded is jre 1.18 because the installer asked for this version.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Bin Yao ([email protected]):
    I have a problem to install Oracle8 1.1.7 for linux on Mandrake. When I run ./runIstaller I got a error message that the Java RunTime Enviroment was not found at ?/bin/jre. The "?"stands for a strange character and may change at diffrent time runing the installer. I downloaded a JRE from blackdown and make a link to /usr/local/jre and I also tried to make link to the JRE shiped with Oracle8 1.1.7. But I still get same error. Does Oracle8 1.1.7 still need JRE downloaded and insatll(or link) to /usr/local/jre? I don't know what else I can try. Please give me a help. Thanks.<HR></BLOCKQUOTE>
    null

  • Installation problem - urgent, PLEASE help!!

    I'm trying to install Java3D and somehow it doesn't seem to be working. I'm not sure whether I should be installing the opengl or the
    directx version, but I've tried both with no luck. I'm running Windows
    M.E.
    I downloaded the JSDK beta 1.4 version (I have previously tried also
    with the 1.3 version, this didn't work either), and now have the
    jdk1.3.1 as a folder on my C drive ( C:\jdk1.3.1) . Then I downloaded
    Java3D from the website, onto C, as an executable file. When I clicked
    it, it went through the installation process (not giving me any
    options for where to install it, i was just clicking on 'next') and
    seemed to complete ok, but I'm trying to test it by running the
    helloUniverse demo, and the file isn't even there. There's a Java3D
    folder which has been created in Windows, but this just contains a
    folder called uninstall_info.
    On my Java plug-in control Panel, it is currently set to 'use java
    plug-in default'. The other options are to use JRE or JDK, in folders
    Program Files\JavaSoft or JDK1.3.1 respectively. I don't know which
    one I should be choosing! I think I tried it with the JDK option
    before and that didn't work either.
    If anyone can please help I'd be really grateful, this is getting
    quite urgent!

    Hi there!
    Well, try installing java3d in the same directory as ur java(which is c:\jdk1.3.1 for u).
    If i am not mistaken, java3d, by default, installs in c:\jdk1.2.2 directory.
    U also have 2 set the path and classpath in the autoexec.bat to addr to \bin and \lib sub-directories resp.

  • Installation issues - Urgent

    hi ,
    I have the following setup.
    * I have a network shared drive on which i installed Oracle 9.0.1.1 Enterprise DB. The shared drive is on a different machine, but same NT network domain. The installation went smooth without any issues. But, when i tried starting the listener i'm getting the following error.
    * The machine on which the shared folder is, has Linux installed on it.
    Failed to start service, error 65.
    TNS-12560: TNS:protocol adapter error
    TNS-00530: Protocol adapter error
    32-bit Windows Error: 65: Unknown error
    Can some one help me on this ?
    This is a very urgent need.
    thanks in advance,
    Sriram

    If you are using windows 2000, then you may want to check the account which is being used to start the listener.
    You can do this from the services window...double-click the TNS service and check the Log On tab to see who it is starting the service as...you may need to specify using "This Account".
    Also, check the SQLNET.ORA file to see if there is a line that reads:
    sqlnet.authentication_services=(NTS)
    If so, try commenting it out.
    This solved my issue using Oracle 8.1.7.

  • Installation Oracle8i 8.1.5

    Hi, my name is Sergio Eduardo Turrubiates Lira.
    my email address is [email protected]
    I4m trying to install Oracle8i 8.1.5 in a SuSE Linux 6.4 but
    when a run the runInstaller i have an error
    Initializing Java Virtual Machine from /usr/local/jre/bin/jre.
    Please wait...
    Error in CreateOUIProcess():-1
    : Bad address
    when i do: bash -v runInstaller there is some code that shows me
    here is the code:
    #!/bin/sh
    # The environment variable $SRCHOME cannot be set during the
    installation
    unset SRCHOME
    CMDDIR=`dirname $0`
    dirname $0
    if [ "$CMDDIR" = "." ];then
    CMDDIR=`pwd`;
    fi
    pwd
    # Replace relative path with fully qualified path.
    if [ ! "`echo $CMDDIR|grep '^/'`" ];then
    CMDDIR=`pwd`/$CMDDIR;
    fi
    echo $CMDDIR|grep '^/'
    if [ x${PATH} != x ] ; then
    PATH=/usr/bin:$PATH
    export PATH
    else
    PATH=/usr/bin
    export PATH
    fi
    if [ x${LD_LIBRARY_PATH} != x ] ; then
    LD_LIBRARY_PATH=/usr/lib:$LD_LIBRARY_PATH
    export LD_LIBRARY_PATH
    else
    LD_LIBRARY_PATH=/usr/lib
    export LD_LIBRARY_PATH
    fi
    cd $CMDDIR/install/linux
    ./runInstaller $*
    Error in CreateOUIProcess(): -1
    : Bad address
    WHAT CAN I DO? PLEASE SOMEBODY HELP ME.

    Check if ORACLE_SID and ORACLE_HOME are set and if your database is open

  • Installation issue -urgent

    Hai frnds
    I have got a new dell studio 15 laptop.iam much interested in oracle applications and for the purpose of learning oracle applications i got it.when i tried to install redhat enterprise linux 4 replacing windows xp on my machine it throws the error message as driver not found and the installation does not proceed.when i asked the computer dealers they said that i have to go for some newer rhel version for installing linux in my laptop since its a new brand.
    before few days i tried to install oracle applications 11.5.10.2 on rhel 5 but i got a lot of errors and the oracle forums advised me to go for rhel 4 for installing oracle applications 11.5.10.2.now iam confused and dont know wat to do .
    my aim is install oracle applications 11.5.10.2 on some newer version other than rhel 4 which supports my dell laptop
    i want to know whether installation of oracle applications 11.5.10.2 is possible on rhel 8 or rhel 9.will the installation goes properly.
    Thanks and Regards
    Parithi.A.

    Hi,
    Please see your other thread.
    install issue -urgent
    install issue -urgent
    Regards,
    Hussein

  • Installation Oracle8i Enterprise Edition Release 3 (8.1.7.0.1)

    I has a Conectiva 8 Linux and did download of Oracle8i Enterprise Edition Release 3 (8.1.7.0.1) for Linux (Intel) of Oracle Site.
    I4m trying to follow the instructions of installation but i don4t know how set the DISPLAY. The runInstaller is in the path /home/usr/oracle/Disk1 and I will execute the runInstaller of server linux.
    The runInstaller quit after the installation of Java Runtime and didn4t display the Welcome Window.
    If anybody know how to do this, please help me!!!! because i need to access a remote DB Oracle from a linux/php web page.
    Thank you very much!

    On all the Linux system I have worked with the DISPLAY environmet variable is set as follows:
    If running install on server:
    DISPLAY=localhost:0.0; export DISPLAY
    If running install from remote system:
    DISPLAY={yourlocalsystemname}:0.0; export DISPLAY
    you may need to run "xhost +{yourlocalsystemname}" on the server as well.

  • Installation Oracle8 Personal Edition to Win NT

    Hi all,
    Had encountered the following error ORA-12203:TNS: unable to connect to destination during my installation to Win NT at the last part.
    Really had no idea on wat had gone wrong? Can someone enlighten me on it?
    null

    This error normally means that the Oracle listener (NT)service is not started.
    Go to the start menu/settings /control panel
    then choose services.
    In the window check the status of the Oracle TNS listener service.
    This should be 'started'.
    Also check if startupup mode for the service is set to 'automatic'.This means that the service will be automatically started when you start windows up.(then you won't have to worry about this any more).
    I hope that this is useful
    regards David
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ng isabelle ([email protected]):
    Hi all,
    Had encountered the following error ORA-12203:TNS: unable to connect to destination during my installation to Win NT at the last part.
    Really had no idea on wat had gone wrong? Can someone enlighten me on it?<HR></BLOCKQUOTE>
    null

  • ECC 6.0 Installation Error - urgent

    Hi All.
      Im installing ECC 6.0, have passed the 41st phase of installation. The installation has aborted at the next stage. The error that i get is FKD-00049 XML parser error. When i start sapinst and continue the installation sapinst exits on its own and displays this error.
    I have tried to modify the keydb.xml file and checked all the logs possible in the sapinst dir but still have the same  problem.
    regards,
    Awaiz.

    What is the exact error messge you get? Post the last lines of sapinst_dev.log...
    Markus

  • ODS activation failures after new hardware installation..urgent

    Hi All,
    I am working in PRD.There are 10 process chains which i need to monitor daily.Daily ODS activation fails in 4 of the 10 chains.The error message for two of the failures are,
    Task 0040 during SID specification without confirmation     
    and for another process it is showing "DBIF_RSQL_SQL_ERROR" error.
    manually I am doing steps and the activation is successful.These type of errors we are getting after the new hardware installation.
    Could anyone let me know are there any patches to be applied inorder to avoid such type of errors.
    Please advice me what to do.
    Thanks,
    Manjula

    What is the patch your currently on at the moment.
    It could also be some of the settings in RZ11 have been changed. You need to work with your basis people to resolve this.
    DBIF_RSQL_SQL_ERROR is a common problem and usually due to not enough processor's available and the database gettings into a knot.
    Check SM21 and ST22 for the more information on the issue.

  • Installation help(urgent)

    hi e1
    i have developed a application using wireless toolkit.it is running well on my notebook.but when i try to install that jar file in my device which is Nokia 6600
    it gives a message "not supported"..
    anybody help .urgent

    i have changed it to CLDC 1.0 and the application got installed fine on my device
    now when i try to connect it through GPRS it is giving the following error
    Connect Symbian OS error=-1520: System error
    i am using HTTP connection and it connects to a servlet which is there on server.
    i am having full GPRS connection
    any suggestiong please help
    thank very much for previous replies

  • 9iAS1022 installation help, Urgent...Please....

    Dear All,
    Does anyone install 9iAS 1022 on Linux?
    I need to install 9iAS 1022 on Red Hat linux 6.0 and 817 db on RH6.2.
    But, I have confuse on the JDK for installation.
    on RH6.2 box
    install 817 db use jdk1.2.2 & jre118_v3
    on RH6.0 box
    install 9iAS 1022 Enterprise edt use jdk1.1.8
    install 9iAS 1022 Minimal edt use jdk1.2.2
    Is that right?
    I have found that the JDK dependency on the installation guide of 9iAS1022.
    The Portal only install with jdk1.2.2. So, Is it right that I need to
    install 9iAS EE & Min Edt on the same machine and using different JDK version?
    How about jre? Do I need to install any JRE on the RH6.0 box?
    If the above true, is that I need to reconfigure the Apache & Jserv port
    (7777 & 8007) for port conflict on the same machine? any ports need reconfigure also?
    Is that just change the port at httpd.conf & jserv.properties file?
    Any extra components need consider? (If I install 9iAS EE first, then 9iAS ME.)
    I also want to ask if I need to change the hostname and the IP of both machine,
    how can i do to reconfigure the 9iAS components function well? what components I need to
    reconfigure??
    Thanks for advance.
    null

    Sigh...
    iAS 1.0.2.2 is only certified against Suse 7.1 or higher, Redhat is no longer certifying Oracle products by their own choice.
    I wouldn't even bother trying to get 1.0.2.2 running on any redhat products, it won't work. I spent a couple weeks trying, finally gave up and loaded Suse and was running within a few hours of loading the OS...
    Logan
    null

  • Installation Failing- URGENT

    Okay heres they story:
    I have a g3 white dual usb ibook. It has the latest os 9 version and os x10.0.3. I decide to buy a retail version(non system specific version) of panther which according to specifications works with my mac. It was at a cheap price and I had been considering updating my os recently so I figured why not. Now when I attempt to first install this os it says there is a problem with the disk. I take the disk, give it an appropriate cleaning and reinsert. I try again and it gives the same message. Try a scratch remover and of course I try installation again. The same issue comes up, but this time i just turn it off manually because at this point I could tell it was going to fail again. At this point I try cleaning once more and then I try again. Upon 4th attempt installation takes much longer to initiate and stops sooner than before. Only this time it more or less freezes with the colorful spinning wheel replacing the cursor and effectively disabling any actual usage. Now I keep retrying to install and it just wont work. I considered doing a clean install, but if this doesnt work that means I will be out of luck because I am on a long vacataion (6 weeks) and obviously didnt think to pack my backup software with os 9 and such. I need help. Thanks in advance.

    Kero, you said, "The disk is available for installation according to the installer; no partition issues".
    Does this means that you are getting to the install window (X window). Can you select a destination volume, can you select Option at this point to choose Archive and Install or Erase and Install. Or does the computer not recognize the disk and it never mounts.
    Also you said, "I considered doing a clean install, but if this doesn’t work..."
    How exactly do you plan to do this if the computer does not recognize the disk and it never mounts or does it.
    Joe
    Power Mac G4 Gigabit Ethernet   Mac OS X (10.3.9)   1.5 GB Ram, ENCORE/ST G4, Tempo SATA, ATI Radeon 9000, Adaptec 4000

  • Installation Oracle8i Lite on Windows95

    Hi,
    I recently downloaded Oracle8i Lite on my home machine (Packard Bell 166MHz,Windows95) to start with Oracle database, and immediately got a problem on running Setup. As I'm accepting defaults:
    Name: DEFAULT_HOME
    Location: C:\orawin95
    Language: English
    the message: "win32.stp(1066) Invalid instantiation string in instantiate()" appears on the screen.
    Appreciate your help on resolving this issue.
    Luba Grechko
    [email protected]

    Try the 8iLite discussion forum
    iSQL*Plus Team

Maybe you are looking for