Installation problem 10g on solaris

Hi ,
I am trying to install 10g (10.2.0.3),install the base relaese 10201 successfully and when trying to upgrade to patchset 2 this is the what i am getting.
/Disk1 $ ./runInstaller -silent -responseFile /wdm01/app/oracle/admin/WDMD/create/10.2.0.3_patch.rsp
/database/10.2.0/10203/Disk1
./runInstaller -silent -responseFile /wdm01/app/oracle/admin/WDMD/create/10.2.0.3_patch.rspStarting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.8
Passed
Checking Temp space: must be greater than 250 MB. Actual 11038 MB Passed
Checking swap space: must be greater than 500 MB. Actual 18253 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-10-04_12-13-35PM. Please wait .../database/10.2.0/10203/Disk1
Oracle Universal Installer, Version 10.2.0.3.0 ProductionCopyright (C) 1999, 2006, Oracle. All rights reserved.
You can find a log of this install session at:
/wdm01/app/oracle/oraInventory/logs/installActions2007-10-04_12-13-35PM.log
.................................................................................................... 100% Done.
Loading Product Information
.................................................................................................... 100% Done.
Analyzing dependencies
................SEVERE:OUI-10091:There are no patches that need to be applied from the patchset Oracle Database 10g Release 2 Patch Set 2 10.2.0.3.0 .
Any suggestions ,Please let me know.

Did you see the Note:454323.1

Similar Messages

Portal Installation Problem on Sun Solaris

Hi,
I'm trying to Install portal (Oracle 9i AS ) on Sun Solaris 2.8 (64 bit). I have followed all the steps and installer show successfull installation. But when I'm trying to check the installation thru web browser, I'm not getting anything. It is not able to load portal. Please let me know do I need to start any listener or anything else.
What else should I do to check the mistakes because I have installed it twise but no luck.
Thanks.
Sandeep

I am having the same problem installing on Windows 2000. I looked at the services that were installed and two of the ones that were marked as Automatic did not start when I rebooted. They are:
OracleiSuitesHTTPServer
OracleOraHome81TNSListener
I also tried to start the HTTP server from the command line but got the following error:
D:\Oracle\iSuites\Apache\Apache>apache
Syntax error on line 14 of D:\Oracle\iSuites\Apache\Apache\conf\mod__ose.conf:
AuroraService - directive already in effect for this Server
If anyone has a solution please let me know. I had a hard enough time trying to get through the installation at all.
Thanks,
-Stephanie
null

NAS 4.0 evaluation version installation problem on SPARC/Solaris 2.8

Installing the NAS 4.0 that was bundled with a Sun SPARC/Solaris 2.8 throws
the following error:
( Installed with quick installation after correct installation of iWS 4.0,
from documentation Directory Server installed is not needed since NAS
installs its own)
In December of 1999, the Sun-Netscape Alliance announced
i P l a n e t A p p l i c a t i o n S e r v e r 6.0
* 100% J2EE compliant
* reliability and high availability for non-stop service required by
the Enterprise
* scalability to go the distance for unplanned success
* the best performance of any web application server
* broadest support of tools for J2EE application development
* high performance and complete solutions for internet enterprise
integration
Information and availability of this next generation application server
can be found at
Please enter the install location [usr/netscape/server4]:
Please enter the FULL PATH of the Web Server Instance to be used
for NAS:
/usr/netscape/server4/https-sofiana03.sofiana
Please enter the password for Netscape Directory Server Adminstrator
and Netscape Application Server Administrator.
The password needs to tb be at least 8 characters. [changeit]:
Installing Netscape core components
Installing Netscape Server Family Core Components
Installing Netscape Directory Suite
Installing Administration Services
Installing Netscape Application Server Suite
Starting the NAS install ...Installing Netscape Application Server 4.0
Core
Binaries
Extracting Netscape core components ...
Extracting Netscape Server Family Core Components ...
Extracting Netscape Core Java classes ...
Extracting Java Runtime Environment ...
Extracting Netscape Directory Server ...
Extracting Netscape Directory Server Console ...
Extracting Netscape Administration Server ...
Extracting Netscape Console ...
Extracting NAS Web Connector Component ...
Extracting NAS Core Server Component ...
Extracting NAS Administrator Component ...
Extracting NAS Deployment Manager ...
Extracting Netscape Application Server 4.0 Core Binaries ...
Fatal Slapd The required field AdminDomain is not present in the install
info fi
le.
Configuring Administration Server...
Your parameters are now entered into the Administration Server
database, and the Administration Server will be started.
Changing ownership to admin user root...
Setting up Admininistration Server Instance...
ERROR: Ldap authentication failed (151:Unknown error.)
Proceeding with installation of Netscape Application Server (NAS)...
Reading userinput log file ..... done
Configuring web server plugin
....../usr/netscape/server4/nas/bin/nas_postinstall
..ksh[49]: /usr/netscape/server4/https-sofiana03.sofiana/start.1007: cannot
creat
e
mv: cannot access /usr/netscape/server4/https-sofiana03.sofiana/start.1007
/usr/netscape/server4/nas/bin/nas_postinstall.ksh[188]:
/usr/netscape/server4/ht
tps-sofiana03.sofiana/config/.obj.conf: cannot create
mv: cannot access
/usr/netscape/server4/https-sofiana03.sofiana/config/.obj.conf
ERROR: Variable KIVAwebdocs was not defined. This command:
/usr/netscape/server4/nas/bin/.kconfns
/usr/netscape/server4/https-sofia
na03.sofiana /usr/netscape/server4/nas
did not set the DocRoot variable correctly.
Please make sure that this file exists and is executable:
/usr/netscape/server4/nas/bin/.kconfns
This NAS installation might not be succesful.
Please enter the WebServer docs directory pathname:
==>
What's WebServer docs? entered usr/netscape/server4/docs didn't help.
Thanks for the support
Pablo

hi,
Make sure that your network uses DNS naming.
This error occurs when a machine is not correctly configured to use DNS naming. The default fully qualified host and domain name presented during installation is not correct.
To successfully install, you need to provide a fully qualified domain name that consists of a local host name along with its domain name.
for example yoursystem is a host name and yourdomain.com is a fully qualified domain name.
regards,
saravanan

[Beginner Oracle 10g on Solaris 10]Script Root.sh asking road

Hello,
Need help please, Iam near the end of my installation Oracle 10g on Solaris 10, Oracle installer ask me to execute Root.sh, he ask me a path, suggesting me this road /usr/local/bin
The message is Enter the full pathname of the local bin directory : usr/local/bin/ ?
my path is
$PATH=/usr/bin:/usr/dt/bin:/usr/openwin/bin/:usr/ucb
$ORACLE_HOME=/export/home/oracle/oraInventory.
This message follow after I executed orainstRoot.sh successfully.
Thx for any help.
Edited by: user583169 on Feb 24, 2009 1:41 PM

This script asks for path where oraenv, coraenv and dbhome scripts should be copied/created.
Default (suggested) path (full path to directory) is /usr/local/bin directory but you can specify your own directory.
So you have at least two options:
1. Use default location and put /usr/local/bin to your $PATH environment variable
2. You can specify your own path which exists (is set) in $PATH variable (for example /usr/bin)

Sun, take responsibility for appserver7 installation problems!

*** First set of problems...
I'm having installation problems on both Solaris 8, (Ultra 480, 1GB RAM, latest recommended patches) and a Windows 2000 Server with SP2 (1GHz P4, 512MB RAM).
I chose default installation directory and then the install
complains that Pointbase 4.2 should be installed into the
same directory etc. Cannot unselect the Sample apps and
Pointbase options.
*** Second problem...
I have an instance previously installed on Windows 2000
Professional with SP2.(1GHz PIII, 512MB RAM, 5GB space)
When i start application server 7.0 , then i get the following
message:
Could not start the instance: domain1:admin-server
Server failed to start:abnormal subprocess termination
Could not start the instance: domain1:server1
Server failed to start: abnormal subprocess termination
Could not start one or more instances in the domain:domain1
Could not start one or more domains
Press any key to continue ...

When you say that you choose the default installation directory and then the installer complained about Pointbase, what platform where you using? Had you already attempted installs in the past or uninstallations that did not complete properly?
For your second issue, did you happen to change the host name of your machine? Try cranking up the log level (edit server.xml) to see what's causing the instances to fail on startup. Did the application ever start up after install? What things did you do just prior to the server exhibiting this behaviour?

Solaris 8 on Intel STL2 server board - installation problem

Hi,
I try to install Solaris 8 (4/01) on Intel STL2 server board (P III 866 MHz, SDRAM 512 ECC Reg, Adaptec AIC7899 Dual Channel-one Ultra160/LVD channel, Intel PRO/100+ Fast Ethernet Controller, ATI Rage* IIC SVGA) - without success.
It recognizes all devices but after I choose Solaris Interactive installation (from CD labeled Solaris 8 Software 1 of 2 Intel Platform Edition) it displays:
Booting kernel/unix...
SunOS Release 5.8 Version...
then reboots after 2 seconds.
Since Intel STL2 board appears in the HCL for Solaris 8 I have struggled a while with the problem. I have not found neither post nor driver update information concerning this issue on the Solaris' related Web sites.
Finally, I found the very strange specification update info of STL2 board, published by Intel:
"13. Sun* Solaris* 8 installation issues
PROBLEM: Sun Solaris 8 cannot be installed on the STL2 server board with any BIOS version later than BIOS Release 1.1, Build 15. The system reboots during install and therefore the installation cannot be completed.
IMPLICATION: Installation of Sun Solaris 8 cannot be completed on an STL2 server board running any BIOS release later than BIOS Release 1.1, Build 15.
WORKAROUND: Sun Solaris* 8 will successfully install on the STL2 server board with BIOS Release 1.1, Build 15."
My BIOS release on the STL2 board is 1.7. It's too new to install Solaris 8 !?!
I am unable to get an old STL2 model with BIOS 1.1. Is there a way to update anything in the Solaris 8 in order to set it up on the new model of Intel STL2 server platform?
I would appreciate any help. Thanks.
Matt

The problem has been resolved.
I got the older BIOS 1.1 Build 15 for Intel STL2 from Intel Internet Support. After I installed BIOS 1.1 instead of BIOS 1.7 had no problem with installation of Solaris 8.
Matt

Installation problem of Oracle 8.1.7 on solaris 10 x86

Hi,
I tried to install the Oracle 8.1.7 on solaris 10 x86 and I got an error message shows: "cannot write to /opt/oracle/product/8.1.7/jar/classes2.jar".checking the log it shows:
Exception: IOException2
and exception: copyGroupFromJar. I ignored the error but the installation failed.By the way, I was not asked to run root.sh during the installation. Can anyone kindly tell me how to make it?
yours
zeushd

Here are some additional statements for 10g on Solaris 10g x86:
1. Execute runInstaller with the -ignoreSysPrereqs option.
2. Select 'Do not create a starter database' when installing Oracle 10g.
3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.

Installation problems on Solaris 9

I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp/ttainst_1/ttapkg.15978/pkg>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

from the diagnostic details:
Architecture           spso0509
Host           SunOS e220r 5.9 Generic_117171-17 sun4u sparc SUNW,Ultra-60
Package           Tarantella Secure Global Desktop Enterprise Edition for
SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Andrew
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Hangul
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Platform
Identity Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Security
Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Windows
Connectivity Pack for SPARC Solaris 2.8+ (4.10.903)
Bill Weir wrote:
Gavin,
Glad you're sorted. Can you confirm that it is 4.10.903 you are using
(not 4.00.903)? I'm concerned if this installation problem is still
present in the later version.
Bill
Gavin Westermann wrote on 31/08/2005 05:00:
Bill - that seems to have done the trick! the installation is now running.
Thanks so much for this.I am running a pair of Sun Ray 170's on my desk
here at home mated to an E220R. I am hoping to use Tarantella to be able
to access and run apps on a win3k server in the same rack.
Gavin
Bill Weir wrote:
Gavin,
This looks like a known problem with TTA 4.00.903 and some Solaris
patches which were distributed at about the same time. However, you say
you're using 4.10.903, and as far as I know the problem should be fixed
in that version.
You could try the workaround described in
http://www.tarantella.com/documentation/sgd/ee/4.0/install.html - search
for "tta_pkgadd" on that page and follow the instructions given there.
Regards,
Bill Weir, Sun Microsystems Inc.
Gavin Westermann wrote on 30/08/2005 05:06:
I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

Solaris 10 x86 installation problem on ProLiant DL380..

I'm trying to put Sol10 b72 on a dual-proc ProLiant DL380 here, with the Compaq 5i array controller.
I have the Solaris 9 drivers from HP; they seem to work just fine for the installation.
The problem comes at the end of the first disc.
Sidebar:
For one thing (and this drove me NUTS until I got lucky and caught it during a reboot), at the end of the install, on the console, it asks for the driver diskettes..again.
The problem is, it doesn't say this ANYWHERE else, only on the console..and if you're doing the installation in the X desktop, you just never know it. It doesn't write this to the xconsole window. I tried installing a good 5-6 times before, instead of hitting the power button out of frustration after the install just hung again, I actually opened up a terminal and typed 'reboot'..and caught the "Please insert the diskette and press Enter" as it killed X. If anyone at Sun is reading this..you may want to fix this, before someone gets very frustrated that their installations never seem to finish...
End Sidebar.
So...I'm doing the console text install (otherwise you'll never see the message to insert the driver diskettes for the Broadcom NIC and the Compaq array), and sure enough, at the end of the install, it asks for the diskette. I pop in the diskette it's specifically asking for (the Compaq array diskette in this instance), and hit enter. It chugs for a second and then says it can't find the driver on the diskette.
Which is incorrect, because if it haden't found it on the diskette during the device configuration assistant phase during bootup, it wouldn't have even been able to install Solaris.
So..what's up? Anyone have any ideas why Solaris finds it one time but can't find it later? Is this a bug or problem in the installation script?
Thanks,
Greg

problem 1 is that it's looking for ../../s0.. Which I
managed to
fake out by creating the dir in the same mount
point.
Problem 2 is that it can't find .tmp_proto, which I
must
concur with. I can't find that on any of the b72 cd
images.
So, the setup_install_server fails.This seems to be the problem when you try to setup an install
server on a Solaris SPARC system for Solaris x86 clients, using
the Solaris 9 or Solaris 10/Express CD media.
There's a Solaris x86 UFS filesystem on slice 0 on the CD media,
and it's supposed to be mounted on the "s0" mount point,
otherwise setup_install_server won't work. On a Solaris x86 box,
vold mounts it automatically for you: /cdrom/cdrom0/s2 is the
mount point for the platform independant ISO9660 part of the CD
media, /cdrom/cdrom0/s0 is the UFS root filesystem.
Problem is that Solaris SPARC:
- does not understand Solaris x86 disk labels
- does not allow mounting x86 UFS filesystems
(and vice versa).
AFAIK, Solaris 9 DVD media does not have this problem. I
guess the same will be true when Solaris 10 DVD media is
available in a few months. On the DVD media there's enough
free space to include an extra copy of the files in the ISO9660
filesystem.

Installation problem with Solaris 2.6 on E220R server

Dear Sir/Madam,
I got the problem to install Solaris 2.6 on the new E220R server and
would appreciate if someone can give me some hint/trick how to fix it.
Firsly I boot the machine using the OPERATING ENVIRONMENT INSTALLATION
CD and then selected Solaris 2.6 and from there I used the Solaris 2.6
CD to install.
The installation went OK however after reboot the OS complained that it
could NOT open the "kernel/unix".
Please send me a copy of your answer to
[email protected]
Thanks in advance,
Trung Nguyen

The response is "/platform/sun4u/kernel/unix".
You will be asked another question, but you can just hit enter in response.
Of course, this solution begs the issue of why it happens in the first place.

Solaris 10 installation problem on IBM Thinkpad - T43

Dear All,
I have a major problem while installing Solaris 10 on my IBM T43 Laptop. Here is my problem:
- I boot from Solaris 10 DVD
- I select the option "Solaris" from the grub menu
- I get 6 installation options
1. Solaris interactive(Default)
2. Custom jumpstart
3. Solaris interactive text(desktop session)
4. Solaris interactive console
5. Driver update
6. Single user shell
- I select option 1(solaris interactive)
- After some processing, I get the "proposed configuration" screen, and an option to accept/reject it.
- I reject the proposed configuration and, as a result enter the "kdmconfig" wizard.
- After this screen, I tried selecting various resolutions, but no matter, I get a blank screen in place of the graphical installation wizard after quitting kdmconfig.
As a result, I am never given a chance to install solaris at all. Can anyone you please dig me out of this hole?
Regards,
Thejasvi V

after some time a console login came with no graphics
I logged in with root and password everything went ok
but still no graphics was there then console
automatically tried to lunch the x windows by giving
message starting x login in display 0x...... butWhile you still have no graphics type, /usr/dt/bin/dtconfig -d as fast as you can and press enter. This will prevent the GUI from starting. Then type kdmconfig and set your parameters. Then use the "test" button to see if the settings that you chose actually do anything. If they just result in a blank screen or a system freeze, then head over to Linux Laptops and search for your Laptop brand.
Most of the systems on that site have thier X.org configuration online available for viewing. This will help guide you to setting up your graphics/monitor on your system.
alan
after that my monitor screen got blanked and I had to
restart my pc, I tried 3-4 times but still its not
supporting the display of my monitor and also I am
not able to find the settings to change the display.
Please help me ...
Abdul Mohsin
[email protected]

UCM 10gR3 installation problem on Solaris

Hi,
I have a problem installing Oracle Content Server 10gR3. When I run the setup script:
*$ cd <path>/UCM/ContentServer/solaris-x86/*
*$ ./setup.sh*
I get the following error:
Exception in thread "main" java.lang.NoClassDefFoundError: Installer
I am running Solaris 10 on VirtualBox, and I have Oracle Database 10gR2 Installed. JDK 1.5.0_20 is installed with Solaris, but I have tried different JDK's, with no use.
I tried setting the CLASSPATH environment variable to ".;/usr/jdk/latest/lib;/usr/jdk/latest/jre/lib", and running the script again, but I got the same result.
Any Ideas?
Thanks in Advance.
Ayman Madkour
Edited by: Ayman Madkour on Nov 2, 2010 9:05 AM

hi,
we are working production environment, for that reason we have to install UCM 10gR3 on sun solaries OS.
UCM 11g will it support SUN Solaries OS ??
can you provide me for UCM Installation guide on sun solaries OS.
its very urgent requirement.please provide installation guide for SUN SOLARIES V.10 asap.
Thanks in advance.
Edited by: 792821 on Nov 30, 2010 11:20 AM

Installation of Oracle 10g in Solaris 10 zones

Hi Everybody,
Is there any Documentation for Installation of Oracle 10g in Solaris 10 Zones.
I am having multiple zones shared by one common SAN Storage.
I want to install oracle 10g in one of the particular local zone.
Regards,
Prosenjit Mukherjee.

Last time I looked at metalink the documentation said zones and containers were not supported. That may no longer be true so you should check there first.

Oracle10g Installation problem Solaris 10

I have tried to install Oracle 10G on Solaris 10 but it failed at Starting Database Control, So for fresh installation I have uninstalled Oracle and by mistake removed the oraInventory directory also.
Now when I run ./runInstaller getting the following error:
./runInstaller
You do not have sufficient permissions to access the inventory '/opt/oracle/app/oracle/oraInventory'. Installation cannot continue. Make sure that you have read/write permissions to the inventory directory and restart the installer.: Permission denied.
Please help me in resolving this.

1. Do you have oraInst.loc file under /var/opt/oracle ? If you don't have other installation on the server, remove this file.
2. make sure oracle user is owner of '/opt/oracle/app/oracle'

Solaris 10 U4 Installation problems

Good Afternoon.
I was hoping someone could help me with a problem I've been having with Solaris 10. Im currently trying to install Solaris 10 U4 onto a HP Proliant DL320 G5. The problem is Im booting off the 1st installation CD and choosing Solaris Interactve install. Im then prompted to complete the system indentfication which i do. It starts the configuring section and freezes at 1%. The entire system hangs.
Has anyone else had these problems installing Solaris U4 on a DL320?
Kind Regards
Anthony

Seems the HP Proliant DL320 G5 is not supported by any verson of Solaris 9 or 10, Had a chat with HP and that seems to be the case.
I will need to purchase another SATA Controller for my Hard drives (something cheap and cheerful) that does support Solaris 10 and install it into the DL320 and hope it installs that way.
Just thought id give anyone that was looking at my post an update
Cheers
Anthony

Installation problem 10g on solaris

Similar Messages

Maybe you are looking for