Installation problem: Cannot connect to TV

Hi,
I just got my new AppleTV. Connected it to a Panasonic TV via HDMI and then with the power cable. The problem is that the TV stays black. AppleTV is responsponding to the remote (when I press a button, the light on the AppleTV is blinking).
I tried to use the "menu and + button for 6 sec" to change the HDMI resolution. No change. TV stays black.
The remote by the way is fully working since it my MacBook is reacting and it starts FrontRow. Another thing: I have startet "Airport Application" to try to find the AppleTV - does not find it. But I assume this is because AppleTV is not yet configured, hence not connected to any network...
By the way, the TV hdmi is working (had another source on it), because I had another source on it before and it is fine.
I switched off already both, TV and AppleTV. Still the same situation...
Can anyone help me? I have no idea what to check anymore.
Pls advice!
br
a

Hi,
thx:)
You were right! I changed to another cable. Now I have a picture!
How come, that the cable works with a DVD player and not with AppleTV? Sounds rather strange to me. What do I need to look at to know whether a cable is compatible with AppleTV?
And now I have the next problem. I cannot connect to my WLAN. By the way - there were no issues at all in connecting my MacBook with the WLAN. I am using WEP security with an HEX password. However, AppleTV let me only choose from the Options "WEP Password", "WEP 40/128-bit Hex", "WEP 40/128-bit ASCII". It works with non of the options. The password is for sure correct (I use it on several devices, also on MacBook). I get error code "-3" when I use the first 2 Options and "-6" when I use the last one and the first one with letters from my password written large. I know that the pwd is case sensitive, and actually I use letters from "a" to "d" in my password. Again, no problem on MacBook.
And again, I would be glad to get your input! I want to show off my new device with the family today - Easter Photos:)
Thx folks and br
A

Similar Messages

BPC 7.0 Server Installation Problem - Cannot connect to reporting services

I am upgrading from 5.1 to 7.0 version for SAP BPC. Everything went smooth on the development server (single instance installation including SQL Server 2005 developers edition 32bit, web, reporting and application services on the same server). I tried to repeat the same process on the test server, and the installation went off the rails. I started with clean installations of SQL Server 2005 on both servers.
When I try to install the BPC server software, I get to the point of access to the report server, and everything stops. I get the following message: Cannot connect to reporting services. I have verified the reporting server name, and I have verified that the server name is correct in the installation panel. I have also verified that the reporting server is configured, started, and that there are no errors.
Any advice?

Hi Sorin,
Thanks for the tip, but this was not the case. The problem was solved by re-loading the OS. Using Windows Server 2003 gave an issue during the re-installation of the SQL Server database. The problem was in the installation itself. After a clean install of both the OS and SQL Server, then SAP BPC 7 worked. The installation does require a number of tweaks, particularly, in my case, the entire Management console must be configured, even if not being used.
This problem is now solved.
J.

I had this problem: "cannot connect to itunes" while trying to download an app so i went to the settings and i kinda messed it up that now i have not apps or itunes icon on my ipad! :( can anyone help me?

I had this problem: "cannot connect to itunes" while trying to download an app so i went to the settings and i kinda messed it up that now i have not apps or itunes icon on my ipad! can anyone help me?

First, try a reset: hold down the home button along with the power button until you see the Apple, then let go.

Airport problem-cannot connect to internet since update

I like many folks here is new to a Mac. I have a iMac intel duel processor. i apparently did this update to 10/4/8 10/2/06. Since then airport does not work and I cannot connect to internet at all. I have talked to Apple customer service but so far no help there. They want me to reinstall disc that came with computer. I also have a new MacBook that has update also. I can set it beside the iMac in my office and it works great. We have a wirelss system in our home and a PC and the MacBook still connect with no problem. Settings on iMac and MacBook look identical to what I can tell. Nothing I try to connect works, rebooting, change some setting. Can anyone offer easy to follow suggestions to a new Mac user. Thanks

Since it's only the iMac that's having the issue connecting using WPA, we don't need to troubleshoot the router or the other computers.
I suggest trying the following on the iMac before attempting to reload the previous version of the OS.
If you use "Preferred Networks," instead of "Automatic" for your "By default, join" setting Location, try the following:
System Preferences > Network > Show > AirPort > AirPort tab
- Delete all preferred networks with encryption
- Add them again after manually connecting
(Note: It will be faster if you turn on "Automatically add new networks to preferred networks list" under "Options" of the AirPort network connection.)
If this doesn't work, something might have gone wrong with the update to 10.4.8. I would suggest that you follow the Apple Tech's recommendation and reinstall the previous OS using the installation disk that came with your iMac.

I-net oranxo driver problem. cannot connect

Hi, im new to the j2ee programming communitty and i was trying to use the i-net type 4 driver to connect to an oracle database. The service name of the oracle database is orcl. i know that the host is the local host, and im pretty sure that the port number is 1521. i dont think i changed it. unfortunately i dont know how to change it. if you could tell me a way to change it once i have already installed it, i would appreciate it.
my code for this problem is
import java.sql.*;
public class testDB{
public static void main(String args[])
     new testDB();
testDB()
     try{
          Connection con = DriverManager.getConnection("jdbc:inetora:localhost:1521:orcl", "scott", "tiger" );
          new com.inet.ora.OraDriver();
          CallableStatement cstmt = con.prepareCall("{call procone(?,?,?)}");
          cstmt.setInt(1,6619211);
          cstmt.setString(2,"Java");
          cstmt.setInt(3,22);
          cstmt.execute();
          con.close();
          }catch(Exception x){
                    System.out.println("exception: "+x);
the error its giving me is the following
com.inet.ora.ORA3SQLException: [OraDriver] Connection Refused:Connect
Anyone know why theres a problem. im sorry i know its probably a dumb question but i cant figure this out.

re: Oracle database and listener:
Oracle does not do things in a simple way. I'll explain things using Oracle's terminology (which I didn't use earlier).
To Oracle, the collection of data-storage (files or devices) that actually has the data is the "database", without regard to any program code or running process.
To Oracle, the memory structures and process (or threads on some OSes) normally used to access a database is called an "instance". (In casual speech, most people call the "instance" the "database"; usually the distinction doesn't matter).
You can have a database without an instance (the program isn't running), an instance without a database (the database hasn't been created or you're using a special Oracle feature called ASM), or you can have multiple instances for one database (an Oracle RAC cluster).
You cannot connect directly to an Oracle instance via a TCP/IP connection (which is normally what a JDBC driver will use, although there are other ways). Instead, Oracle has another program, called the "listener" that brokers connection requests; your program talks to the listener on port 1521 and the listener arranges for your program and the database to connect. The database might actually be on another computer but almost never is, except with RAC clusters or failover configurations. So the listener has to be running for most JDBC programs to work.
SQL*Plus can connect to a database instance via TCP/IP, which requires the listener; however, SQL*Plus can also connect to a database instance that is on the same computer via inter-process communication, which does not require the listener. Stopping the listener process and connecting via SQL*Plus is a common way of putting a database into "maintenance mode", where only the database administrator can make changes to the DB.
The standard Oracle installation will install everything and set up the listener and have it autostart on boot and everything else needed. However, people sometimes disable things they think they don't need, so it's not unheard of for people to turn off the listener becaus they think they don't need it. Or sometimes there's an error and the listener fails to start...

Personal File Sharing Problem - Cannot "Connect to Server"

hi, my network (using a base station and an express) has two computers currently connected - a dual G5 (afp://10.0.1.4) and a powerbook aluminum (apf://10.0.1.2). both are connected to the same "server"...laptop via airport and g5 via ethernet.
i have no problem connecting from my g5 to the laptop using the Connect to Server function, but from my laptop, i cannot connect to the G5. when i use the "Connect to Server" function, the "connect" button won't respond. when i "browse," i get the window that says "the alias could not be open, because the original item could not be found" fwiw, i can connect to ftp servers from my laptop without problem...personal firesharing is on for both computers, and firewalls are off.
any suggestions?

powerbook aluminum (apf://10.0.1.2)
Gene, hopefully just a mistype!?
I think we should start of by getting Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, Reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least if it doesn't fix it, it'll eliminate a few questions.
Besides, once you really, really need it... you can't install it!
I mean, I know where those Aliases are, but sounds like more is involved.

From yesterday, I have been facing the problems in my iphone and my wife iphone. The same problem, "cannot connect to itunes store". I have strong internet connection. I tried all the possible way I could like setting, general, date and time.....etc.

I have proble of "cannot connect to itunes store. After I have updated the new software ios6, the problem arised in one of my mobile. In the second mobile, I didnot updated the software.Today in the morning, the problem ariesed in that mobile as well. I cannot open the itunes, don't have access to apple store . I tried to solve the problem like going to setting, general, Date and time, automatically off, keeping one year ahead date. I tried all the possible options I could get from the googel. How do I get rid of this problem?

No - I have not tried other routers on my network.
What I meant was I could use my itouch on other users wireless networks without any issues.
I'll update the routers DNS to try using Google's 8.8.8.8 instead of my ISP.
Is the issue DNS performance using local ISP -or are there other possibel isues when using local isp DNS?

Apple Mail Application Problems - Cannot connect to Server

Hello Apple Community.
For the past two days my Mail application on my iPad and MacBook do not. It is as if there is a problem with the internet but my internet it working fine. The app opens and loads and continues to load but then says it Cannot Connect to Server.
Is there any way to fix this problem. I do not have OSX Mavericks.
Please help.
Thanks

If the problem exists on two different devices (different operating systems), your router or ISP is probably the reason. Contact your ISP for help.
Barry

How do I fix the problem cannot connect to iTunes Store?

How do I fix the problem I encounter on my iPad - cannot connect to iTunes Store?

Hey Fpatrick13,
We have an article that goes over troubleshooting for that issue. If you saw an alert message like "Cannot connect to the iTunes Store. An unknown error has occurred" on your iPad, or something similar, check out the bottom of the article titled "Troubleshooting on an iPhone, iPad, or iPod touch" for detailed steps:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
David

Bluetooth problem - Cannot Connect to Device that is not copyright protected SCMS-T Method

I have a Qosmio X875-5280 which has a bluetooth adapter. I also have a bluetooth device which is an adapter for a Bose Sounddock such that the device allows the Sounddock to receive the bluetooth audio stream from the laptop -- at least that is how it worked until recently. Diagnostics show that both the bluetooth adapter and the bluetooth device are working. When trying to connect to the device, I now get "connection failed" message or the message "You cannot connect to a device that is not copyright protected by SCMS-T method." It seems the Toshiba bluetooth stack is responsible for this, however, I fail to see why a device which is acting like headphones fails to connect now. I have Windows 7 64 installed. I have uninstalled all of the bluetooth drivers and re-installed them several times. Attached is a pdf file which shows all messages and settings relevant to the issue.
Attachments:
bluetooth messages.pdf ‏158 KB

See the solution I proposed some time ago here.
-Jerry

AI client installation fails cannot connect to pkg.oracle ......

I cannot find where to amend the repository location for the AI clients, as a route out to oracle is not available.
I have updated the default.xml file and the ai_manifest.xml file whre else is this parameter stored?
It also exists withn the AI iso file does this need to be amended?
thanks for any help Mick

Just as previously directed, Enabling Remote HTTP Connection to the Database, should be enough to try to enable remote access from the web console. Home -> Administratrion -> Manage HTTP Access and the radio button to toggle remote access is enough.
Just access from the 127.0.0.1 ip address, enable it and you'll be ready to access it from outside your box.
If you are attemping to use the command execution, verify the user are you connected to when issuing the command.
What's the message or problem that arises when you attempted this first procedure?
~ Madrid

Airport problem - cannot connect to the internet

I'm having problems connecting to my home wireless (that before it didn't happen).
Anytime I turn on airport and choose my network, i enter my wpa2 password but my mac doesn't recognise it, and shows me the error "connection has exceeded Time Limit".
I already tried to:
- delete the my network from the list.
- add it manually using the "+" button
- run the network assistant, but it says that my password is wrong (but it's not!!!)
- access my network ith my smartphone, and I can connect without any problems!
- acess with ethernet - and it works - i can connect without problems!
Sometimes I get an exclamation mark in the airport icon, but I already checked my network preferences and I'm sure that the encryption wpa2 is selected.
I think that I entered in my network only once, but the connection was soooooo slow (even after renewing dhcp) that the connection lasted 1 minute.
Can anyone help?
I own a macbook pro - snowleopard 10.6.8

What type of router are you using?
I'd like you to check the mac address filtering to make sure that's turned off.

Cannot connect due to sim-card problems, Cannot connect due to sim-card problems

Trying to get started with my iPhone 4, which I recently bought from one of my mother's colleagues.
But when I get to the activation of the iPhone it shows a message on the display that says: "Only compatible SIM cards from a supported phone company may be used to activate iPhone. Insert the SIM card that came with your iPhone or visit a supported telephone company store to get a replacement SIM card ". This suggests that the iPhone is not unlocked for other phone companies, but the other day I was in a store and got the phone unlocked. Therefore I can now not figure out what the problem is. When I connect the iPhone to iTunes quickly a message appears on my Mac, which says: "The SIM card inserted in this iPhone does not appear to be supported", and then the same message which is displayed on the iPhone.
Some geniuses who can help me?
Thanks,
Johan Helms

With "Carrier" you mean mobile operator right? For should I then ask her, who sold me the iPhone, to get it unlocked or can I do it myself? I have not received any mail from Apple and I can't get into the iPhone itself. I was told that her who sold me the phone had taken care to restore it.
I have tried to update my iTunes, but i already got the latest version. I have also tried to install the new iOS 6 software on the iPhone, but after a few seconds a message is showed, telling that it's not possible to backup the iPhone.
I'm starting to get a bit frustated, given that my own phonecompany told me to contact Apple, Apple told me to contact Telenor and ask them to unlock the iPhone. None of it has worked and now you say that it is not possible for Telenor to unlock the iPhone.

Mail & Exchange problem - cannot connect to exchange server

I am having a problem configuring MS exchange on Mail 5.2. I am not able to connect to exchnage server. The error message is consistent
MFEWSErrorDomain error 56
I can connect to the same server using Mail on iPhone 4 but from what I understand iOS and Lion use different protocols?
Thanks
Console log files
6/24/12 9:52:58.849 AM Mail: *** Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1278/MessageStores.subproj/EWSConnection.m:489
Didn't recieve a response for EWS request <EWSGetFolderRequestOperation: 0x7f8034b86540> (EXECUTING)
          0   Message                             0x00007fff8862eef8 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 116
          1   Message                             0x00007fff8862f08e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 185
          2   Message                             0x00007fff8855d7cc -[EWSConnection sendMessage:forRequest:] + 1721
          3   Message                             0x00007fff8856ddff -[EWSGateway sendMessage:forRequest:] + 75
          4   Message                             0x00007fff8857e54c -[EWSRequestOperation executeOperation] + 108
          5   Message                             0x00007fff8864f97f -[MonitoredOperation main] + 228
          6   Foundation                          0x00007fff8a5b06b4 -[__NSOperationInternal start] + 705
          7   Foundation                          0x00007fff8a5c3912 ____NSOQSchedule_block_invoke_2 + 124
          8   libdispatch.dylib                   0x00007fff8f4e5a86 _dispatch_call_block_and_release + 18
          9   libdispatch.dylib                   0x00007fff8f4e6965 _dispatch_worker_thread2 + 255
          10 libsystem_c.dylib                   0x00007fff8e0f33da _pthread_wqthread + 316
          11 libsystem_c.dylib                   0x00007fff8e0f4b85 start_wqthread + 13
6/24/12 9:52:58.851 AM Mail: *** Assertion failure in -[EWSGateway fetchDistinguishedFolderIdsWithConnection:], /SourceCache/Message/Message-1278/MessageStores.subproj/EWSGateway.m:333
Didn't get a response for all folder ids, expected 10, got 0
          0   Message                             0x00007fff8862eef8 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 116
          1   Message                             0x00007fff8862f08e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 185
          2   Message                             0x00007fff8856dca2 -[EWSGateway fetchDistinguishedFolderIdsWithConnection:] + 1356
          3   Message                             0x00007fff88559bc7 -[EWSAccount authenticatedConnection] + 1042
          4   Message                             0x00007fff885587c8 -[EWSAccount _synchronizeMailboxListWithUserInput:] + 72
          5   Message                             0x00007fff885591b4 -[EWSAccount synchronizeAllMailboxes] + 78
          6   Message                             0x00007fff884e7430 -[RemoteStoreAccount _synchronizeAccountWithServerWithUserInput:] + 651
          7   CoreFoundation                      0x00007fff908cbefc __invoking___ + 140
          8   CoreFoundation                      0x00007fff908cbd94 -[NSInvocation invoke] + 132
          9   Message                             0x00007fff8847bf68 -[MonitoredInvocation invoke] + 196
          10 Message                             0x00007fff88458a79 -[ThrowingInvocationOperation main] + 33
          11 Message                             0x00007fff88458a1f -[_MFInvocationOperation main] + 449
          12 Foundation                          0x00007fff8a5b06b4 -[__NSOperationInternal start] + 705
          13 Foundation                          0x00007fff8a5c3912 ____NSOQSchedule_block_invoke_2 + 124
          14 libdispatch.dylib                   0x00007fff8f4e5a86 _dispatch_call_block_and_release + 18
          15 libdispatch.dylib                   0x00007fff8f4e6965 _dispatch_worker_thread2 + 255
          16 libsystem_c.dylib                   0x00007fff8e0f33da _pthread_wqthread + 316
          17 libsystem_c.dylib                   0x00007fff8e0f4b85 start_wqthread + 13

YAY MEEEE!!! After hours of looking for this i Have figured it out.
Log into the OWA actt. (Web Outlook) and hit the ? mark in the right hand corner > About.
Grab the data in the about page. Complete your wizard and when you get the auto discovery error message and it requests the server name copy the HOST ADDRESS - not the "Exchange Client Access server name"
Thank ou KK Pan, Csound1, and this guy here http://eightwone.com/2013/01/26/the-case-of-the-not-updating-outlook-for-mac/ for leading me down a path to discovering this.

9300 Curve wifi problem - cannot connect to internet using only wifi once data turned off

I've got a 9300 Curve with a data plan from Rogers. I want to use my wifi in hotspots when I go overseas without using my data. I have no problems connecting to wifi networks. Once I turn off my data services, my connections to the wifi network show that the signal is still just as strong, but I can't use my browser, facebook, bbm, etc. - message is "unable to connect to internet" when I try and access my browser. This problem occurs whether I'm using a public hotspot or my home router. I used to be able to access wifi without using data from Rogers on my older Curve (can't remember the model), so I don't think it has anything to do with my plan.
Any suggestions/advice would be much appreciated!

Thanks for the reply!
Did you mean "leave data ON and turn off data roaming"? But that would just turn off my data while I'm roaming, and while I'm not roaming, it'll still access through data and not through wifi like I would prefer. That's what I understand, but pls correct me if I'm wrong! I guess I meant to also mention that whether I'm in my home zone or overseas, I still can't use my browser, bbm, etc through wifi only, with data turned off...it just says there's no connection to the server/internet, even though it shows that I'm connected to a wifi network.

Installation problem: Cannot connect to TV

Similar Messages

Maybe you are looking for