Installation problem for Weblogic Server 1035 Generic

Running 11G database on Win 2008 Server 64 bit. I downloaded the 1035 version of Weblogic, following the step by step installation guide provided by Oracle Support and additional documentation such as:
http://download.oracle.com/docs/cd/E2176http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls4_01/install.1111/e12001/toc.htm
The installation was successful and I proceeded to create a test domain (dummy_domain) to test if the installation was able to receive http requests. I started the admin server. In Internet Explorer I then entered:
http://localhost:7001/
and got the following error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Any advice as to where I could be going wrong would be greatly appreciated. Thanks, J

Pierluigi,
Thanks a lot for pointing this out. I was foolishly following the reference at the end of the installation process which ommitted the 'console' word. Thanks again! J

Similar Messages

SP2 Installation Problem on Weblogic Server 6.1SP1

hi,
i encountered a problem installing sp2 to my second server.
(Windows 2000 Advance Server with SP2, dual Xeon CPU, 3GB, 200GB.
Weblogic Server 6.1 with SP1 installed at d:\bea) x 2
installation file itself is valid. as installation at server 1 was successful. however,
when installing at server 2:
1) by double clicking on the exe - blank GUI popup appeared on screen without any
usual text (first screen that reads: welcome - the installer will guide you....).
all three buttons were there. click on the next buttons all the way would give a
title 'installation complete' without any delay. sp2 was not installed.
2) by running exe from console - GUI popup appeared normally. however, when prompted
to select bea home, selecting the default folder at d:\bea and when clicking on next
button, a popup would appear claiming that weblogic server home is not found at d:\bea.
and process discontinued.
the beahomelist is found at c:\bea, with content reading correctly as d:\bea;c:\bea;
Previous SP1 installation on server 2 about 2 months back was successful.
would appreciate for ur input. thanks a lot in advance.
rgds, keigo

I've exactly the same problem and will attempt to reinstall WebLogic 6.1
with SP3 built-in ...
"keigo" <[email protected]> wrote in message
news:[email protected]..
>
update on the progress, spoke to a BEA staff from regional office and I aminformed
that this problem was never encountered and am advised to perform freshre-installation
with wlserver6.1 with sp2 built in.
"keigo" <[email protected]> wrote:
Hi Laurent,
Thank you very much for ur reply.
My Weblogic Server is installed in D:\bea. Just like the Server 1
configuration.
And I m choosing to install SP2 into this existing home.
I am kind of worried by this as it is nearing production and I am running
into this
weird problem here.
Thanks again.
Rgds, keigo
Laurent Goldsztejn <[email protected]> wrote:
Hello Keigo,
It seems that the problem comes when your server is installed in the
directory where the beahomelist file is located. Am I correct when I
assume that the installation fails when you install the service pack 2
over the server installed in c:\bea?
Thank you,
Laurent Goldsztejn
Developer Relations Engineer
BEA Support

Installation Problem of weblogic server on Linux

Hi,I want to install weblogic server on linux but it is raising various exception such as-------------------------------------------java.lang.Class.forName0(Native)java.awt.windowcom.zerog.ia.installer.Main.bjava.lang.reflect.Method.invokecom.zerog.lax.LAX.launchcom.zerog.lax.LAX.MainI am not able to understand kinldy help me to resolve this issue.RegardsBhagat Singh

yeah it was unzip that's why, but now I did change it the name of zip file to wls1033_generic.jar and I did past it in c: but when I am writing the statment c:/> java -Xmx1024m -jar wls1033_generic.jar then I got the message unable to access jarfile wls1033_generic.jar
is it a problem that the java folder is in program file and i am accessing in directly in c:
can any one tell me the complete procedure of installing weblogic.
thanks
imran
Edited by: 875581 on 10-Aug-2011 22:37

Problem downloading WebLogic Server 8

I am having problems downloadingl the eval copy of Weblogic server 8. The'Specify
Download Options' page in the Weblogic installer doesnt request proxy server authentication
information (userid, password). Is there a way to work around this issue and successfully
download the software.
thanks
-vinny

"Tanguy" == Tanguy Le Berre <[email protected]> writes:
Tanguy> I have a problem while installing weblogic server 8.11 on a solaris 9 machine.
Tanguy> I use the following instruction: ./filename.bin and I see the following message:
Tanguy> Illegal instruction (memory dumped)
Tanguy> (in french: instruction incorrecte (vidage memoire))
Tanguy> A core file is generated but it doesn't help resolving this problem. It seems
Tanguy> to be talking about unzip, as I found things like this message in this file:
Tanguy> error: cannot allocate unzip buffers
Tanguy> unzipsfx: cannot find myself! [%s]
Tanguy> error [%s]: missing %ld bytes in zipfile
Tanguy> I also tryed to install weblogic server 8.10 and no core file is generated but
Tanguy> I have the following message:
Tanguy> error [export/home/tleberre/net_server810_solaris32.bin]: missing 570 byes in
Tanguy> zipfile
Tanguy> (attempting to process anyway)
Tanguy> ** Error during init, error code = 2.
Tanguy> I first thought the file I downloaded was incomplete, so I downloaded it again
Tanguy> but I still have the same problem. Can anyone help me? What have I forgotten to
Tanguy> do?
Well, perhaps one thing you've forgotten is that it's better to write notes
about particular problems in the newsgroup or mailing list that is most
appropriate to the problem. If people who read this newsgroup only know about
the webserver, then they won't have any idea how to help you with installation
problems with WebLogic server, which this clearly is (the "webserver" is not
"WebLogic Server", but only part of the entire package).
Have you made an attempt to contact BEA support? It seems likely that your zip
file is corrupt.
===================================================================
David M. Karr ; Java/J2EE/XML/Unix/C++
[email protected] ; SCJP; SCWCD; SCBCD

Problem installing weblogic server 8.11

I have a problem while installing weblogic server 8.11 on a solaris 9 machine.
I use the following instruction: ./filename.bin and I see the following message:
Illegal instruction (memory dumped)
(in french: instruction incorrecte (vidage memoire))
A core file is generated but it doesn't help resolving this problem. It seems
to be talking about unzip, as I found things like this message in this file:
error: cannot allocate unzip buffers
unzipsfx: cannot find myself! [%s]
error [%s]: missing %ld bytes in zipfile
I also tryed to install weblogic server 8.10 and no core file is generated but
I have the following message:
error [export/home/tleberre/net_server810_solaris32.bin]: missing 570 byes in
zipfile
(attempting to process anyway)
** Error during init, error code = 2.
I first thought the file I downloaded was incomplete, so I downloaded it again
but I still have the same problem. Can anyone help me? What have I forgotten to
do?
Thank you
Tanguy Le Berre

"Tanguy" == Tanguy Le Berre <[email protected]> writes:
Tanguy> I have a problem while installing weblogic server 8.11 on a solaris 9 machine.
Tanguy> I use the following instruction: ./filename.bin and I see the following message:
Tanguy> Illegal instruction (memory dumped)
Tanguy> (in french: instruction incorrecte (vidage memoire))
Tanguy> A core file is generated but it doesn't help resolving this problem. It seems
Tanguy> to be talking about unzip, as I found things like this message in this file:
Tanguy> error: cannot allocate unzip buffers
Tanguy> unzipsfx: cannot find myself! [%s]
Tanguy> error [%s]: missing %ld bytes in zipfile
Tanguy> I also tryed to install weblogic server 8.10 and no core file is generated but
Tanguy> I have the following message:
Tanguy> error [export/home/tleberre/net_server810_solaris32.bin]: missing 570 byes in
Tanguy> zipfile
Tanguy> (attempting to process anyway)
Tanguy> ** Error during init, error code = 2.
Tanguy> I first thought the file I downloaded was incomplete, so I downloaded it again
Tanguy> but I still have the same problem. Can anyone help me? What have I forgotten to
Tanguy> do?
Well, perhaps one thing you've forgotten is that it's better to write notes
about particular problems in the newsgroup or mailing list that is most
appropriate to the problem. If people who read this newsgroup only know about
the webserver, then they won't have any idea how to help you with installation
problems with WebLogic server, which this clearly is (the "webserver" is not
"WebLogic Server", but only part of the entire package).
Have you made an attempt to contact BEA support? It seems likely that your zip
file is corrupt.
===================================================================
David M. Karr ; Java/J2EE/XML/Unix/C++
[email protected] ; SCJP; SCWCD; SCBCD

Examples.cluster.rmi for WebLogic Server 11g

How can I get package examples.cluster.rmi for WebLogic Server 11g?
I would like to perform a similiar test like the following:
https://freepaper.taichung.gov.tw/examplesWebApp/examples/src/examples/cluster/rmi/package-summary.html
Thanks a lot

Hi,
I have just now installed WLS via the net installer, and the default examples server password of welcome1 does indeed work for me.
However, I note from your post that you are using port 7101, not 7001. Could that be the issue?
http://localhost:7101/console/login/LoginForm.jspKevin

Failed to start Admin Server for Weblogic Server Domain

I Created a domain named mydomain in weblogic server 10.3 in server 2003.But when i start Admin Server for Weblogic Server Domain from startmenu, it failed.
I examined the log under domains\mydomain\servers\AdminServer\logs\AdminServer.log and got the following information:
java.lang.NoClassDefFoundError:weblogic/ldap/EmbeddedLDAPChange
at weblogic.ldap.EntryChangeListenerImpl.receiveEntryChanges(EntryChangeListenerImpl.java:28)
Caused by :java.lang.ClassNotFoundException: weblogic.ldap.EmbeddedLDAPChange
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
Caused by :java.util.zip.ZipException: error reading zip file
at java.util.zip.ZipFile.read(Native Method)
at java.util.zip.ZipFile.access$1200(ZipFile.java:29)
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at ...(CommonSecurityServiceManagerDelegateImpl.java:465)
Caused by: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at .. (ServiceEngineImpl.java:365)
Caused by: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at .. (BootStrapServiceImpl.java:910)
Caused by: <openjpa-1.1.1-SNAPSHOT-r422266:891341 nofatal user error>kodo.jdo.UserException: This operation cannot be perfomed while a Transaction is active.
at org.apache.openjpa.kernel.BrokerImpl.close(BrokerImpl.java:4087)
####<Critical><WebLogicServer><SOA><Adminserver><main><<WLS Kernel>><><><1282012271468><BEA-000362><Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399] Security Services Unavailable
at weblogic.security.service.CommonSecurityserviceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
I ignored some detailed error message.The runtime environment is server 2003 Enterprise Edition sp2.
Thx in advance for any reply.

Hello Djam,
Please review the following:
The FMW WebLogic Server (WLS) installation has been configured to use a non-default Java temporary files directory,
i.e. the following has been set in the WebLogic startup or setDomainEnv.sh script:
EXTRA_JAVA_PROPERTIES="-Djava.io.tmpdir=/appl/oracle/temp_java_files ${EXTRA_JAVA_PROPERTIES}"
Reference: How to Change the WebLogic Server Location for Temporary Files (Doc ID 1336002.1)
When the Middleware home was restored the directory specified by java.io.tmpdir parameter was missing,
Therefore an IOException occurred when opening the wallet and WLS was unable to initialize the OPSS successfully.
To resolve the issue re-create the directory specified by the java.io.tmp dir parameter, and make sure the owner and group access are the same as for the FMW installation.
Unable Start AdminServer: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException (Doc ID 1923395.1)
Bogdan

Is OIM 10.x available for WebLogic Server?

Is OIM 10.x available for WebLogic server? The only download I see on the site for OIM 10.x is the fully bundled suite with OracleAS.

If by OIM you mean Oracle Identity Manager, then OIM 9.1 is supported on Weblogic 10.x. OIM 9.1 is NOT part of or the same thing as Oracle Identity Management 10g. The latter is a set of services tightly coupled with Oracle's app server (OC4J). Identity Management 10g does not run on Weblogic. Some people like to say that Identity Management 10g includes all Oracle identity management products which adds to the confusion.
Look here: http://www.oracle.com/technology/documentation/oim1014.html

No login command was found for 'WebLogic Server 10.3.5.0 - in managed serve

i am getting following warning when i run my web logic managed server
No login command was found for 'WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 Oracle WebLogic Server Module Dependencies 10.3 Thu Mar 3 14:37:52 PST 2011 Oracle WebLogic Server on JRockit Virtual Edition Module Dependencies 10.3 Thu Feb 3 1.
Would appreciate suggestions to resolve.
Thanks.

Hi,
Add -Dweblogic.StdoutDebugEnabled flag while starting the managed server and then post the verbose error message in your next post
For setting the flag follow the below steps
If your using Linux box and not using node manager to start the managed server,add the below line startManagedWebLogic.sh file
JAVA_OPTIONS="-Dweblogic.StdoutDebugEnabled=true ${JAVA_OPTIONS}"
echo "JAVA_OPTIONS=${JAVA_OPTIONS}"
If your using Windows box and not using node manager to start the managed server,add the below line startManagedWebLogic.cmd file
set JAVA_OPTIONS=-Dweblogic.StdoutDebugEnabled=true %JAVA_OPTIONS%
echo JAVA_OPTIONS=%JAVA_OPTIONS%
If you are starting the Managed server through the node manager then use these flags From Admin console : servers >>>. MS1 >>>> server start >>>> Arguments :-Dweblogic.StdoutDebugEnabled=true
Regards,
Fabian

Missing license file for : WebLogic Server 6.1

Hi there,I just installed the weblogic server and want to test the mssqlserver4 driver. I run the example.jdbc.mssqlserver4.ThreadTests.java. I met this kind of erro message:ThreadsTests - exception java.sql.SQLException: java.sql.SQLException: $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$Missing license file for: WebLogic Server 6.1$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$I do not know why.Philip

Check to make sure that the directory in which you have a valid license file
"license.bea" is included in your CLASSPATH.
-Utpal
"Philip" <[email protected]> wrote in message
news:3ba8e9be$[email protected]..
Hi there,I just installed the weblogic server and want to test themssqlserver4 driver. I run the example.jdbc.mssqlserver4.ThreadTests.java. I
met this kind of erro message:ThreadsTests - exception
java.sql.SQLException: java.sql.SQLException: $$$$$$$$$$$$$$$$ License
Exception $$$$$$$$$$$$$$$$Missing license file for: WebLogic Server
6.1$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$I do not know
why.Philip

How to install license for Weblogic Server 6.1

Hi,
I downloaded WebLogic Server 6.1, it works fine.
but I want to change the JDBC to Oracle (the default is Cloudscape). I follow the
instructions in page "Installing WebLogic jDriver for Oracle". it looks fine until
"java utils.dbping ORACLE james 1234 DBServer"
it says: Missing license file for: Weblogic Server 6.1.
I found the licese.bea is in c:\bea, I use "updatelicense.cmd" to do it several times,
it still doesn't work.
I am using Win2k and Oracle 8.1.7
Thanks.
James

Hi.
http://edocs.bea.com/wls/docs61/jcom.html
or do you have a more specific issue?
Regards,
Michael
Raymond Cheng wrote:
Anybody know how to prepare JCOM environment for developer to intetrate their windows client.
Thanks a lot.
Raymond Cheng.--
Michael Young
Developer Relations Engineer
BEA Support

Can anyone tell me Why?Missing license file for: WebLogic Server 6.1

Thank you for take a look and give me solution!
Missing license file for: WebLogic Server 6.1
Error encountered:
java.sql.SQLException: Fail to load jDriver/Oracle due to license checking failed!

make sure the folder in which the license file exists, is in the classpath
sree
"Robert" <[email protected]> wrote in message
news:3b57da5e$[email protected]..
>
"Roberto" <[email protected]> wrote:
Thank you for take a look and give me solution!
Missing license file for: WebLogic Server 6.1
Error encountered:
java.sql.SQLException: Fail to load jDriver/Oracle due to license
checking
failed!

Are there different licensing schemes for WebLogic Server?

Is there different licensing schemes for WebLogic server?
For example,
Is there a licensing scheme to purchase a runtime WLS license so we can run only ADF and BIP?
Is there a licensing scheme to purchase a runtime WLS license so we can run only ADF and Oracle Reports?
Edited by: 957072 on Jan 28, 2013 5:43 AM

Please go through below metalink id for weblogic licensing.
Master Note on WebLogic Server (WLS) Licensing and License Files [ID 1076283.1]
Thanks,
Kishore

How can i build application using Jdeveloper 10g for Weblogic server 10.3

Hi,
We have a requirement where in we want to build an SOA application using Jdeveloper 10g for Weblogic Server 10.3.
Is there any way to make a connection to Weblogic Server 10.3 from JDeveloper 10g? If there is any way please share it with me.
Thanks,
Amit Kumar

Amit,
SOA Suite is not yet certified for WLS 10.3. You have to wait for the certification of it.
At the moment you can't install the SOA Suite on WLS 10.3 nor connect from JDev 10.1.3 to it.
--olaf

Where You can create a support case for weblogic server?

Hi all,
I would like to know where I can create a support case for weblogic server?
I logged me in metalink3 but I did not found a way to create a service request for WLS.
Thanks in Advance.

I believe you still need to use BEA's support resources at this point: http://www.oracle.com/bea/support.html

Installation problem for Weblogic Server 1035 Generic

Similar Messages

Maybe you are looking for