Installation problem Lightroom 4.3

The installation of Lightroom 4.3 stops with an error message, reading "The older version of Adobe Lightroom 4.3 cannot be removed. Apply to your technical support group".
This "older version" is probably a trial version, I had before, which I had to uninstall "by hand" (cancelling files and registry items) since a regular uninstall procedure didnot work.
Any ideas about what part of the "older version" is still hanging around?

Thanks for your quick reaction.
I have done what you suggested, downloading Lightroom version 4.4, but the problem remains the same. The error message now mentions "..former version 4.4..". It seems the problem is actually related to version 4, since the beta version of 5 (which I received for comments) has installed smoothly. Is there any conflict possible between 4 and 5?

Similar Messages

Installation problem lightroom

Have a problem installing the lightroom update 5.7.1 (from 5.4) OS Win7Pro (same on 2nd PC with Win8.1) Cannot extract the files. I'm admin and there is enough place on the disc !

Thanks for your quick reaction.
I have done what you suggested, downloading Lightroom version 4.4, but the problem remains the same. The error message now mentions "..former version 4.4..". It seems the problem is actually related to version 4, since the beta version of 5 (which I received for comments) has installed smoothly. Is there any conflict possible between 4 and 5?

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

Hello!, my name is jan and i am using lightroom 2 for many years. I have an original set-up disk with a 24 digit serial number. I had never problems wih installation of lightroom. suddenly lightroom refuses to start when I try to from a picture i have tak

Hello!, my name is jan and i am using lightroom 2 for many years. I have an original set-up disk with a 24 digit serial number. I had never problems wih installation of lightroom. suddenly lightroom refuses to start when I try to from a picture i have taken with my nikon D500 and transferred to WINDOWS 8.1. i have tried to re-install lightroom : the procedure asks for the serieal number , but refuses to accept the number that always worked. PLEASE help!! jan

If you are certain you have the right serial number, there really isn't much we can help you with here. You might try downloading and installing the last version of Lightroom 2. It will be the trial version, but when the trial screen appears there is an option to indicate that you have a serial number. Incidentally, Lightroom serial numbers start with the first four digits being 1160.
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 2.7 - English, French, German

My installation of Lightroom 5 on Windows 7 Desktop gives me an "Installation Failed - Learn More" after trying to install it on the apps page... how do I fix it so I can install Lightroom?

My installation of Lightroom 5 on Windows 7 Desktop gives me an "Installation Failed - Learn More" after trying to install it on the apps page... how do I fix it so I can install Lightroom?

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

ERROR: Third party payload installer Install Lightroom 5 CCM.exe failed with exit code: 1603

Anyone out there that knows how to get past this? I´m using Adobe Application Manager and nothing else.
Installed Photoshop and Illustrator without problem, but as I try to install Lightroom 5 it is aborted.

I am having the same problem, I am using win vista 64, and everything but LR 5 works,
{{ Third party payload installer Install Lightroom 5 CCM.exe failed with exit code: 1603 }}
any solutions out there??

My Mac Book Pro has just had a new memory and solid state drive installed. After the installation, the Lightroom tools all became grey. There is no longer any color on the screen other than my picture. Even the color sliders are grey. Can you please help

My MacBook Pro just had a new memory and solid state drive installed. Since the installation, the Lightroom tools are now all grey. Even the color sliders are grey. Please help!

My guess is that your operating system got updated to Mavericks and that you are running an old version of Lightroom:
Sliders are white, look different | Mac OS X 10.9 Mavericks
Be aware of a Lightroom bug with color management in mavericks that makes shadows too deep in the Develop module: Jao's photo blog: Serious color management bug in Mac OS 10.9 "Mavericks" and Jao's photo blog: Further quantification of the Mavericks color management problem.

Yosemite install problem, Lightroom 5.6

Hello, I've a installation problem on Yosemite system. At the first start, after install package and activate product, i've error message (I'm French user) : "Une erreur s'est produite lors de la tentative de changement de modules."
I can translate the error message at : "An error occurred while attempting to change modules"
I don't know if it's the real English text
Other problem, when I test to relaunch Lightroom, it restart the activate serial number process.
An idea to resolve my problem ?
Thanks for your help and sorry for my english

Thank you to everyone who has viewed my question I appreciate your time looking to see if you could offer help. I was able to ad my 2014 file back into lightroom pretty easily thank goodness my 10 month old daughters whole life captured in digital files lives in there. I am still having my first problem reguarding auto importing so if any of you could weigh in on that I would really appreciate some help. thanks in advance everyone.

After CC packager created installer for Lightroom, Installer does not install

I created an installer for Lightroom (windows) using the CC packager. When I tested it it did not install Lightroom. I tried the 32bit version and the 64bit version and they both did the samething. Is there a problem with creating the Lightroom installer?

Far out, I have been suffering from the same issue! I have tried on multiple machines to install Lightroom CCP pacakge! When running the setup.exe for other packages it will actually install the application and display a desktop icon / program files entry. I have wasted hours trying to figure out why Lightroom wasn't installing even tho event logs said successful! How is there no official documentation from Adobe that this is the expected behaviour for Lightroom manual installs?
Sure the documentation says run setup.exe then exceptions installer, my thoughts were why bother with exception installer if the main package has not installed correctly! It should mention the program won't appear until exceptions have been installed?
Thanks for creating this thread DeltaCollege! And thanks for the resolution Romsinha!

Installation problem on Intel

I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..

I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Installation Problem on Win8

Hello all
I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
Thank you guys for your support.
Installation Logs:
java_install.log - Pastebin.com
java_install_reg.log - Pastebin.com
JavaDeployReg.log - Pastebin.com

Hi people!
I have two problems with nokia suite...
first of all I can't install it at my windows 8.1, I receive the message attached...
Second,
in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
can somebody help me?
Attachments:
mokiasuit.png ‏13 KB

Installation problem on RHEL4 ..

Installation problem on RHEL4 (Red Hat Enterprise 4) i have
install start at unzip tar.gz and tar -xf .... now i have run
./installFMS it show
./fmsini: error while loading shared libraries: libstdc++.so.5:
cannot open shar
ed object file: No such file or directory
ERROR: Your are running the Macromedia Flash Media Server
installer
on the wrong platform.
it not support for fedora or anything else?
plz help....

would be nice if someone responded to this.... Macromedia
wouldn't have been this lax in giving a reply :) AND they keep up
with OS updates too :)

Xp_logininfo Installation problem

Hello gurus,
I'm facing the same problem as described in this link:
Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
the error I get is similiar:
<i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
but I just don't get how to solve it.
-I've tried to use the profiler but didn't find any information that will help me to solve.
-One of the guys wrote to add "logon rights" to the user ... what does it mean ?
Please advice,
Dimitry Haritonov

Hi sven,
Thank you very much for the quick and direct answer.
The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
Best regards,
Dimitry Haritonov

Installation problem Lightroom 4.3

Similar Messages

Maybe you are looking for