Installation problem of 9iAS infrastructure
During the installation of 9iAS infrastructure, it cannot create the database and the error log shows the following message:
Total System Global Area 139228284 bytes
Fixed Size 283772 bytes
Variable Size 88080384 bytes
Database Buffers 50331648 bytes
Redo Buffers 532480 bytes
Create controlfile reuse set database iasdb
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE ??
ORA-01565: ???? 'K:\oracle9\9ias\infrastructure\oradata\iasdb\EXAMPLE01.DBF' ?????
ORA-27046: ???????????????
OSD-04012: @I.W$j$p$#,[2E (OS 140255737)
My working environment :
Chinese Windows 2000 Professional
Anyone have any suggestion about this error. please help me.
thks.
Hi,
The first ORA error in the stack suggests that something is wrong with the file size (for file example01.dbf).
The OS-specific error message says:
OSD-04012
File size mismatch
Cause: The file to be re-used is either too large or too small.
Action: Specify the correct file size or delete the existing file.
Hope that helps,
Fredrik
Similar Messages
-
Problem Linking 9iAS infrastructure on Linux - Please Help
My installation of 9iAS infrastructure fails at the linking stage.
The install documentation states that I must install the binutils patch,
binutils-2.11.90.0.8-13
from the Oracle Metalink site.
I have no Metalink account so am unable to obtain the patch from there.
My Red Hat Linux installation is 7.2 and my binutils package was at 2.11.90.0.8-12
I downloaded binutils-2.11.93.0.2-11.i386.rpm from the Red Hat site and installed it.
I still however get linking errors.
Do I need this specific (binutils-2.11.90.0.8-13) patch ?
If so, where can I get it from if I have no Metalink account ?
Many thanks,
AdrianHello.
I'm installing 9iAS R2 on SUSE Linux 8.0.
The installer failed when it relinks:
'Error in invoking target relink of makefile /home/oracle/8.1.7/precomp/lib/ins-precomp.mk'
I solved this problem editing the file:
$ORACLE_HOME/bin/genclntsh and change the following line
LD_SELF_CONTAINED="-z defs"
to read:
LD_SELF_CONTAINED=""
Then run the script $ORACLE_HOME/bin/genclntsh. Also make sure you have all the Oracle environments set!
The script should create new lib file!
After that hit retry in the error popup.
All the Infrasctructure installation finished succesfully.
I'll hope this help you.
Now I'm trying to install Portal and Wireless, but the installer says can't find the SSO Server (default port is 7777?).
If you can install it, please, let me to know it: [email protected]
Good luck !!!
Adolfo. -
Installation problems with 9iAS Developer KIT
I have 9iAS installed on one machine with 9iAS infrastructure in it's own home and 9iAS components it's own home.
The Big problem I am having is that each time I try to install the 9iAS developer KIT in 9iAS component home an error about saying cannot install.
So should the 9iAS developer KIT have it's own home? That is different from 9iAS component home on the same machingI have 9iAS installed on one machine with 9iAS infrastructure in it's own home and 9iAS components it's own home.
The Big problem I am having is that each time I try to install the 9iAS developer KIT in 9iAS component home an error about saying cannot install.
So should the 9iAS developer KIT have it's own home? That is different from 9iAS component home on the same maching -
Problems with 9iAS Infrastructure Installation
hi to all..
I get some problems installing the 9iAS Infraestructure (9.0.2.0.0) in Red Hat 9
when I click on 'Install' button display something like:
Installing Java Runtime Environment
1.1.8.0.0
Link Pending...
Copying README
Status bar ===> 0%
..and never advance
I have checked out my oraInstall.err, look:
java.lang.NoSuchMethodException
at java.lang.Class.getMethod0(Native Method)
at java.lang.Class.getMethod(Class.java:888)
at oracle.sysman.oii.oiif.oiifb.OiifbWizChainDlgElem.setDialogProperties(OiifbWizChainDlgElem.java:980)
at oracle.sysman.oii.oiif.oiifb.OiifbWizChainDlgElem.doOperation(OiifbWizChainDlgElem.java:645)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:140)
at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:808)
at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:172)
at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:855)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:140)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:519)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:177)
at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:349)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:628)
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2005-08-21_11-37-11AM/libactionUnix151.so: /tmp/OraInstall2005-08-21_11-37-11AM/libactionUnix151.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1419)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1314)
at java.lang.Runtime.load0(Runtime.java:698)
at java.lang.System.load(System.java:797)
at ssOiGenClassux151.<clinit>(ssOiGenClassux151.java:15)
at sscreateLinkux.createLink(sscreateLinkux.java:201)
at sscreateLinkux.installAction(sscreateLinkux.java:63)
at oracle.sysman.oii.oiis.OiisCompActions.doActionWithException(OiisCompActions.java:1143)
at oracle.sysman.oii.oiis.OiisCompActions.doActionImpl(OiisCompActions.java:975)
at oracle.sysman.oii.oiis.OiisCompActions.doAction(OiisCompActions.java:550)
at Components.oracle.swd.jre.v1_1_8_0_0.CompActions.doAction(CompActions.java:66)
at Components.oracle.swd.jre.v1_1_8_0_0.CompInstallPhase1.doActionP1createLink3(CompInstallPhase1.java:285)
at Components.oracle.swd.jre.v1_1_8_0_0.CompInstallPhase1.stateChangeActions(CompInstallPhase1.java:77)
at Components.oracle.swd.jre.v1_1_8_0_0.CompActions.stateChangeActions(CompActions.java:33)
at oracle.sysman.oii.oiic.OiicInstallActionsPhase$OiilActionThr.run(OiicInstallActionsPhase.java:578)
at oracle.sysman.oii.oiic.OiicInstallActionsPhase.executeProductPhases(OiicInstallActionsPhase.java:2259)
at oracle.sysman.oii.oiic.OiicInstallActionsPhase.doInstalls(OiicInstallActionsPhase.java:2112)
at oracle.sysman.oii.oiic.OiicInstallActionsPhase$OiInstRun.run(OiicInstallActionsPhase.java:3020)
at java.lang.Thread.run(Thread.java:484)
Before installing, I set the LD_ASSUME_KERNEL to 2.4.20 (export LD_ASSUME_KERNEL=2.4.20)
what can I do? please help..
thanks!!
benek, hackerss.comAdditional, this is the last message in the installActions.log :
Llamando acción unixActions2.1.0.8.0 createLink
source = /opt/jre/1.1.8/bin/.java_wrapper
destination = /opt/jre/1.1.8/bin/jre
overwriteExistingLink = true
How many time that this actions requires? I have waited for 30 minutes, and it's still in 0%
thanks again!
benek -
Installation problem on 9iAS on Lunix platform
Hi,
I have already installed Linux 7.3 plus Oracle 9i release 2 in my PC, and then today I
am going to install 9iAS and the error messages shown 'Your local host file database
file (typically /etc/hosts' is not configured properly when i choose 'J2EE and Web Cache' in RunInstaller. my host file in /etc/hosts has been setup.
anybody can help me !!!!I'm getting the following error:
"There is no non empty value found for variable s_jservPort under section Ports in file /u01/oracle/product/9IAS/Apache/Apache/ports.ini"
The ports.ini file contains the specified s_jserv_Port = 8007. OK. This was probably due to installing it a 2nd time, without de-installing and so the whole section of the .ini file
was duplicated.
I currently have a 9.0.1 database installed. I did remove the oracle_home and sid lines from the .bash_profile before installation of 9iAS.
I am not sure how the http port system works and what I have to check to make sure that any other application isn't using the same port.I have since found out how to switch off the http server ( $ORACLE_HOME/Apache/Apache/bin/apachectl stop )
Also, should I have my seperate 9i database shutdown? I did.It would seem that it needs to be active for a connection to create it's own database.
Am I correct in saying that version 1.0.2.2.0 installs a new 8.1.7 database and installs everything required for the program to run in this database? Yup.
Once installation is finished do I set my ORACLE_HOME and SID to my 9i database or 9IAS directories?
Still not sure on this one... haven't sucessfully installed yet.
Can I not just use the same 9i database for everything. The installation document didn't seem to go on and explain the archicture of how it all hangs together when installation is complete or any options I had along the way.
The installation document assumes too much knowledge for my liking. -
Problems with installing 9ias infrastructure
Iam trying to install oracle 9ias application server on a windows 2000 professional edition.
so before installing application server iam trying to install 9ias infrastructure.
my initial attempts have failed so iam trying to reinstall it again after deinstalling the existing infrastructure.
the error iam getting is that the user who installed earlier is different from current user.
i use only one account on the machine. how can i correct the problem.
thanks
chakriThe server has 2 500mhz Pentium Processors.
Actually, I was able to bypass the issue by forcing the OUI to use 1 processer (Note 229478.1), but I am now having issues with the Infrastructure Schema Configuration Assistant. Even though it says it succeeded, the log says otherwise. -
Help: problem trying to re-install 9iAS Infrastructure
I'm using Windows 2000.
A while ago I installed 9iAS Infrastructure, and later I deleted the entire installation.
Since then, I have changed my computer's name. Now, when I try to re-install the Infrastructure, I'm getting an error message which says that I must use the same user login to install the Infrastructure as I originally used. I'm getting this message even though I deleted all the files (that I'm aware of) associated with the original installation, so, clearly, my computer still has a "memory" of the deleted installation somewhere.
Can you please tell me which additional file or files I must delete from my system to destroy this trace of the original installation? Please note that I am using the same downloaded files now to try to perform the installation as I originally used.
Thank you for your assistance.
HughHugh, here's the info you wanted:
PURPOSE
This article describes the procedure how to manually perform the actions to
create a "clean machine" on Microsoft Windows 95/98/NT/2000/XP and how to
manually remove all Oracle components (e.g.: oracle RDBMS database server,
IAS, OEM, client installations, etc) and services from your computer.
SCOPE & APPLICATION
This article is intended for DBA's on the Microsoft Windows platform.
WARNING:
1. Remove all Oracle components from your computer only as a last resort,
and only if you want to remove ALL Oracle components from your system.
2. These instructions remove all Oracle components, services, and registry
entries from your computer. In addition, any database files in the
subdirectories under ORACLE_BASE\ORADATA\ are also removed.
3. These procedures will also remove Oracle network configuration files,
user written scripts and any other user generated files that may be stored
in Oracle_Base directories.
4. Exercise extreme care when removing registry entries. Removing incorrect
entries can severely compromise your computer.
MANUALLY REMOVING ALL ORACLE COMPONENTS AND SERVICES FROM YOUR COMPUTER
Section A (steps 1-6) describes the removal of all Oracle components on
Windows NT,2000 and XP.
Section B (steps 1-4) describes the removal of all Oracle components on
Windows 95 and Windows 98.
A. Removing Components on Windows NT/2000/XP.
To remove all Oracle components from a computer on Windows NT/2000/XP:
1. Check privileges:
1.a. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle services (if any are running):
2.a. NT: Choose Start > Settings > Control Panel > Services.
2000,XP: Right click My Computer > Manage > Services and Applications >
> Services
2.b. If any Oracle services (their names begin with Oracle) exist and have
the status Started, select the service and click Stop.
2.c. Click Close to exit the Services window.
2.d. Close the Control Panel/Computer Management window.
3. Remove the entries in the Windows registry:
3.a. Start the registry editor:
Choose Start > Run > regedit
Note: On Windows NT you can use regedt32 instead. The searching
capabilities of regedt32 is limited compared to regedit. It will be
needed to be able to edit 32-bit entries in the registry. Since we
are not going to update any 32-bit entry it is not needed.
3.b. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
Note the value of the key INST_LOC, this is the location of the
Oracle Universal Installer (OUI). The default location is
C:\Program Files\Oracle\Inventory. If this value is different, make
note of it, so we can delete these files later.
Delete this ORACLE key.
3.c. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC and expand all subkeys and
remove all keys under here which are related with the
"Oracle ODBC Driver"
3.d. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and remove
all keys under here that begin with ORACLE or ORAWEB.
3.e. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\...
...\Application and remove all keys under here that begin with ORACLE.
3.f. Go to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\...
...\Uninstall and remove any entries related to Oracle.
3.g. Go to HKEY_CLASSES_ROOT, remove all keys that begin with Ora or ORCL
(e.g. Oracle..., ORADC..., ORAMMC..., OraOLE..., OraPerf... and ORCL...).
3.h. Close the registry.
4. Clean up the environment settings:
4.a. NT: Choose Start > Settings > Control Panel > System > Environment tab
2000,XP: Choose Start > Settings > Control Panel > System > Advanced tab >
Environment variables.
4.b. At "System Variables" click on the variable PATH in order to modify
the value. For example, you may see a path similar to this one:
C:\ORACLE\ORA81\BIN;C:\PROGRAM FILES\ORACLE\JRE\1.1.7\BIN
4.c. If an %ORACLE_HOME% was installed, remove this %ORACLE_HOME%\BIN path.
4.d. If JRE was installed by Oracle, remove the JRE path.
4.e. If there is a CLASSPATH variable under "System Variables", first make note
of the path defined, then delete it. This variable can be added back at
a later date if needed.
4.f. Check if there are any other Oracle variables set in "System Variables",
ORACLE_HOME, ORACLE_SID, TNS_ADMIN, JSERV or WV_GATEWAY_CFG. If these
exist, delete them also.
4.g. Click on APPLY and OK.
4.h. Close the Control Panel window.
5. Delete the software and icons:
5.a. NT: Choose Start > Programs > Windows NT Explorer.
2000,XP: Choose Start > Programs > Accessories > Windows Explorer.
5.b. NT: Go to %SystemDrive%\WINNT\PROFILES\ALL USERS\START MENU\PROGRAMS
2000,XP: Go to %SystemDrive%\DOCUMENTS AND SETTINGS\ALL USERS\...
...\START MENU\PROGRAMS
Note 1: These locations depend on whether OS was upgraded from NT, or
this was a fresh install of 2000/XP.
Note 2: To locate your System Drive, type in DOS-box: echo %SystemDrive%
and delete the following icons:
- Oracle Installation Products
- PRODUCT_NAME - HOME_NAME e.g.
Oracle for Windows NT - Dev6i
Oracle Reports 6i - Dev6i
Oracle Olap Client 2.2 - Dev6i
Oracle9i Lite
Oracle - OraHome92
5.c. Go to %SystemDrive%\Program Files\Oracle or the location of INST_LOC as
noted earlier in step 3.b. and delete this directory.
Note: In order to successfully delete all files, you may have to reboot
your computer first, in order to clear Operating System locks
on those files.
5.d. Go to the temporary directory and delete all files and directories in here
(see note in 5.c.).
NT: %SystemDrive%\Temp
2000,XP:
%SystemDrive%\Documents and Settings\<username>\Local Settings\Temp\
5.e. Go to the drive where the Oracle software is installed on your machine
and delete all ORACLE_BASE directories on your hard drive (see note in
5.c.).
5.f. Close the Windows Explorer / Windows NT Explorer.
6. Finish the removal:
6.a. Empty the recycle bin
Right click on recycle bin > Empty Recycle Bin.
6.b. Reboot your computer.
6.c. Optionally: If you are on Windows 2000 or XP run the System Defragmenter
utility:
- from Control Panel, select Administrative Tools > Computer Management
- expand Storage, then select Disk Defragmenter
- highlight each virtual drive, in turn, and click Defragment
- reboot your computer when finished.
B. Removing Components on Windows 95 or Windows 98.
To remove all Oracle components from a computer on Windows 95/Windows 98:
1. Remove the entries in the Windows registry:
1.a. Start the registry editor at the MS-DOS command prompt:
C:\> REGEDIT
1.b. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
Note the value of the key INST_LOC, this is the location of the Oracle
Universal Installer. The default location is
C:\Program Files\Oracle\Inventory
If this value is different, make note of it, so we can delete these files
later. Delete this ORACLE key.
1.c. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC and expand all subkeys and
remove all keys under here which are related with the
"Oracle ODBC Driver".
1.d. Go to:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall
and remove any entries related to Oracle.
1.e. Go to HKEY_CLASSES_ROOT, remove all keys that begin with Ora or ORCL
(e.g. Oracle..., ORADC..., ORAMMC..., OraOLE..., OraPerf... and ORCL...).
1.f. Close the registry.
2. Clean up the environment settings:
2.a. Open your AUTOEXEC.BAT with an editor to modify the PATH variable.
For example, you may see a path similar to this one:
C:\ORACLE\ORA81\BIN;G:\PROGRAM FILES\ORACLE\JRE\1.1.7\BIN .
2.b. If an %ORACLE_HOME% was installed, remove this %ORACLE_HOME%\BIN path.
2.c. If there is a CLASSPATH variable set in the AUTOEXEC.BAT, first make note
of the path defined, then delete it. This variable can be added back at
a later date if needed.
2.d. If JRE was installed by Oracle, remove the JRE path.
2.e. Save the AUTOEXEC.BAT file and close the edit.
3. Delete the software and icons:
3.a. Choose Start > Programs > Windows Explorer.
3.b. Go to SYSTEM_DRIVE:\WINDOWS\START MENU\PROGRAMS
and delete the following icons:
- Oracle - HOME_NAME
where HOME_NAME is the previous Oracle home name.
- Oracle Installation Products
3.c. Go to SYSTEM_DRIVE:\Program Files\Oracle or the location of INST_LOC as
noted earlier in step 1.b and delete this directory.
3.d Go to SYSTEM_DRIVE:\Temp and delete all files and directories in here.
3.e. Go to the drive where the Oracle software is installed on your machine
and delete all ORACLE_BASE directories on your hard drive.
3.f. Remove any Oracle-related .INI files that may exist in the Windows
directory. The Windows directory may be found by entering
"echo %WINDIR%" from a command prompt.
Typical Oracle .INI files include ORADIM73.INI, ORADIM80.INI,
ORACLE.INI, ORAODBC.INI
3.g. Close the Windows Explorer.
4. Finish the removal:
4.a. Empty the recycle bin
Right click on recycle bin > Empty Recycle Bin
4.b. Reboot your computer.
RELATED DOCUMENTS
Oracle Installation Guides for Windows.
SEARCH WORDS
WIN95, WIN98, WINNT, WIN2000, Windows95, Windows98, WindowsNT, Windows2000,
de-install, deinstall, re-install, reinstall
Copyright (c) 1995,2000 Oracle Corporation. All Rights Reserved. Legal Notices and Terms of Use. -
Oracle 9iAS Infrastructure Installation
I have been trying to install Oracle 9iAS Infrastructure on a machine. My database version 9.0.1.1.1 is running on a seperate machine. Every time I am trying to install, i am getting an error OC4J installation failed.
4) Last, the infrastructure comes with its own copy of database and application servers even you have installed or going to install any latest version of servers. It looks like Oracle doesn't integrate their products properly, the same story of Oracle CASE and database server.
Oracle Sales keep on saying they have got the best Application Server in the market. But I can't see the reason why the people will choose it. I saw a lot of messages from the forums saying the people tried to install the products on Linux for evaluation purpose. This will discourage people using the products if Oracle Support only provide solutions on the RedHat Advance Server.
I will try again with 9iAS 9.0.3 when I receive the package. Funny enough, I did ask people about their experiences on installation BEA Weblogic. It is smooth and only takes about half hour at all. -
9ias infrastructure installation
Hi:
i installed 9ias infrastructure, but when running oid configuration assistant, it failed during installation with an error "can`t find OID Server". Then other configuration assistans failed after oidca failed, like OPMN....
After that, i changed some environment variables, and started oidca, but and error message appeared "error configuring subscriber fails".
What can be wrong, has anybody got this error before. Should i start all over the installation from cero.
Please, somebody save my life......
Grantful......
Andres WongWhat I did was to let the Oracle create the infrastructure database and then shutdown the database and move the control file and datafile to other locations. There are more than 40 datafiles need to be moved. I am not sure you can change the database version.
Jean -
9iAS installation problems w/ db cache and Portal
I am still trying for a succesful installation of the 9ias software. I have followed all of the suggestions that have been posted and I am now getting TNS cannot resolve service name during the database cache part of the install. I checked services and it seems that this install didn't set up a TNSListener service for the 9iSuites home? I set the oracle_sid = icache as it instructs in the appendix, set the o7_dictionary_accessibility = true, and renamed the spfile to a .txt file so Oracle wouldn't find it. Subsequent to the database cache errors, the Portal install can't find the database either. I'm frustrated because I had the server up and running succesfully with an 8.1.7 db and I'm trying to switch to 9iDB. Any help would be greatly appreciated! My boss is getting a little impatient.
Thanks.Mark,
I was succesful on my 4th try. This is what I did differently and I'm not sure what triggered success.(a preface: database cache was not succesful but portal was). After install of db I followed these suggestions before install of 9ias(plus others offered by Tao Fan in a previous post:
in the init.ora file:
set o7_dictionary_accessibility=true(this is an o, not 0)
comment out the 'dispatchers' line.
rename the spfile in the <oracleHome>\database directory(i changed mine to xspfile.txt). Make sure you restart the db after any changes to the init.ora file. Set all oracle services to manual and disable the http server. Stop all services.
Start your install. Mine hung at 100% complete with a command window open. Before I closed the command window I started the database service but not the listener. The install proceeded to fail during the db cache and portal install. I exited out of the install, started the dbTNSlistener, and any iSuitesagent services(not sure if this helped but I'm happy now!)Then, I restarted the machine. Then start/programs/iSuites/portalConfigAssistant and it worked.
If none of this makes sense I can email you the documentation I kept while installing. -
Help with 9iAS Infrastructure post-instalation
Hi,
Can anyone tell me where I'm going wrong with this? Having installed 9iAS infrastructure component (V9.0.2.0.1) on a Windows 2000 machine, everything seems to work fine. I can log in using the IAS_ADMIN password I have set up, start up all the services and run all the demos. However, once I reboot, I can no longer log in as IAS_ADMIN. It refuses to accept the password I have set up. Is there any post-installation stuff I have missed?
ThanksEven I am having the same problem.
I am still struggling to get this right but in the meantime you can start from the following URL:
Re: Alter table doubts
All the best.
-Puneet -
Update database installed with 9iAS Infrastructure?
Hi!
I'm about to install BIBeans on this system, which has Oracle 9i Database (9.2.0.4), 9iAS Infrastructure (9.0.2.3) and 9i Mid-Tier (9.0.2.3)... In the readme for the bibdemo schema, it says this: "Install (and upgrade, if you have an existing installation) the Oracle9i database. You must also install the required patchsets to get your database to version 9.2.0.3 or higher. Installation of the demo database schema will fail if the correct patchsets are not installed."
I previously patched the 9i Database instance up to 9.2.0.4, but I was under the impression that Infrastructure installed its own copy of the database... Is that correct? If so, do I also have to update the IASDB? I had a look at the readme for the 9.2.0.4 DB patch, and it looked like that could only be applied to the 9i Database Server...
Any help would be greatly appreciated.
Thanks!Even I am having the same problem.
I am still struggling to get this right but in the meantime you can start from the following URL:
Re: Alter table doubts
All the best.
-Puneet -
Starting and stopping 9ias Infrastructure and Application Server
I have Oracle9ias R2 Infrastucture and Application running on one machine (bad idea - I know) on Windows 2000. I had to restart the system and of course all the different instances from Infrastructure and Application Server started in the wrong order and now nothing operates at all. (It was fine yesterday - really, it was).
Could someone please give me a rough guideline on how to start these services, or instances in the right order.
Much obliged
WilliamSir,
Can you help me to do the installation of 9ias rel. 2.
I installaed 9ias infrastructure on separate m/c.
But unable to do single sign-on on 9ias server side.
How to configure it for web applicaions?
regards -
Hi,
I'm currently investigating single sign on and have a question about
the 9ias Infrastructure I need to install. I know that the infrastructure
will work with Oracle9i Database and with Oracle 8i if I upgrade the Net8
listener but I was wondering if it would work with Oracle 7 at all ?
Cheers,
MaggieOracle9iAS Infrastructure is an install type in Release 2 (v9.0.2). This install type installs a 9.0.1.3 database which contains all the
metadata Oracle9iAS mid tiers components such as Portal, Wireless etc use. Only the database we ship with is supported to contain the
Metadata. We do not support any other 9i or 8i or 7 databases to contain the Metadata.
The only exception is Portal. Portal metadata can be populated into any 8.1.7 or a 9.0.1.4 database.
Thanks
Pavna Jain
Oracle9iAS Product Management -
Hi All,
I am trying to install 9iAS (9.0.3) on my win2k Pro machine - and got weird problem.
First time I installed, everything went ok and worked fine. - However, since I have Oracle8i installed before and somehow Toad was screwed after 9iAS installation, I de-installed 9iAS (using Universal Installer come with 9iAS CD)
Weird problem happens ever since - it always pop up error (at 30% of "Setting up Install Types" bar):
All Oracle9iAS installations on a host must be installed by the same operating system user. The initial Oracle9iAS installed at ... was installed by a different operating system user. .....
The problem is that I definetely used same user name (indeed, besides admin, I am the only user who can login to this machine)
Any suggestions will be appreciated!
WarrenI cleaned registy many times using regedit (deleted anything related to 9i)- no use
I have 8.1.7 installed, and when install 9ias, error message says there's a previous 9i installation at my 8.1.7 directory (C drive) by different user - not make sense
because (1) the first time I install 9i, I put 9ihome in D drive. (2) I install 8.1.7 using same username
The only thing changed is the user password to login to my computer. It's really weird.
Maybe you are looking for
-
My iphone is no longer being recognized on itunes
After the latest itunes update my iPhone 4 is not recognized by iTunes at all (completely unable to sync). Message indicates compatibilty issues. I have Windows 7 64 bit.
-
How to take a picture with the iPad
how do I take a photo with the iPad?
-
This phone is bricked....
I know you are saying it cannot be done, but this seems to be just what I did. iPhone 3g 8Gb - Model MB702LL - Win7 Newest iTunes. I was running a 3.1.2 (7D11) firmware. (It was just much faster responding than the 4.0.1 firmware.) So..I upgraded to
-
Hello, Need help with a macbook air, running mountain lion. I don't know which version because my computer won't start. It appears to boot normally all the way to where the desktop can be seen and the cursor is drawn properly and the cursor can be m
-
What is the best avi tp 3gp video converter?
Hi could i have advice on this please, because when i try to load my avi into nokia multimedia player it is not recognised, so i;d like to know which free avi to 3gp converter is best thanks!