Installation problem on 9iAS on Lunix platform

Hi,
I have already installed Linux 7.3 plus Oracle 9i release 2 in my PC, and then today I
am going to install 9iAS and the error messages shown 'Your local host file database
file (typically /etc/hosts' is not configured properly when i choose 'J2EE and Web Cache' in RunInstaller. my host file in /etc/hosts has been setup.
anybody can help me !!!!

I'm getting the following error:
"There is no non empty value found for variable s_jservPort under section Ports in file /u01/oracle/product/9IAS/Apache/Apache/ports.ini"
The ports.ini file contains the specified s_jserv_Port = 8007. OK. This was probably due to installing it a 2nd time, without de-installing and so the whole section of the .ini file
was duplicated.
I currently have a 9.0.1 database installed. I did remove the oracle_home and sid lines from the .bash_profile before installation of 9iAS.
I am not sure how the http port system works and what I have to check to make sure that any other application isn't using the same port.I have since found out how to switch off the http server ( $ORACLE_HOME/Apache/Apache/bin/apachectl stop )
Also, should I have my seperate 9i database shutdown? I did.It would seem that it needs to be active for a connection to create it's own database.
Am I correct in saying that version 1.0.2.2.0 installs a new 8.1.7 database and installs everything required for the program to run in this database? Yup.
Once installation is finished do I set my ORACLE_HOME and SID to my 9i database or 9IAS directories?
Still not sure on this one... haven't sucessfully installed yet.
Can I not just use the same 9i database for everything. The installation document didn't seem to go on and explain the archicture of how it all hangs together when installation is complete or any options I had along the way.
The installation document assumes too much knowledge for my liking.

Similar Messages

Installation problems with 9iAS Developer KIT

I have 9iAS installed on one machine with 9iAS infrastructure in it's own home and 9iAS components it's own home.
The Big problem I am having is that each time I try to install the 9iAS developer KIT in 9iAS component home an error about saying cannot install.
So should the 9iAS developer KIT have it's own home? That is different from 9iAS component home on the same maching

I have 9iAS installed on one machine with 9iAS infrastructure in it's own home and 9iAS components it's own home.
The Big problem I am having is that each time I try to install the 9iAS developer KIT in 9iAS component home an error about saying cannot install.
So should the 9iAS developer KIT have it's own home? That is different from 9iAS component home on the same maching

Installation problem of 9iAS infrastructure

During the installation of 9iAS infrastructure, it cannot create the database and the error log shows the following message:
Total System Global Area 139228284 bytes
Fixed Size          283772 bytes
Variable Size          88080384 bytes
Database Buffers     50331648 bytes
Redo Buffers          532480 bytes
Create controlfile reuse set database iasdb
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE ??
ORA-01565: ???? 'K:\oracle9\9ias\infrastructure\oradata\iasdb\EXAMPLE01.DBF' ?????
ORA-27046: ???????????????
OSD-04012: @I.W$j$p$#,[2E (OS 140255737)
My working environment :
Chinese Windows 2000 Professional
Anyone have any suggestion about this error. please help me.
thks.

Hi,
The first ORA error in the stack suggests that something is wrong with the file size (for file example01.dbf).
The OS-specific error message says:
OSD-04012
File size mismatch
Cause: The file to be re-used is either too large or too small.
Action: Specify the correct file size or delete the existing file.
Hope that helps,
Fredrik

9iAS installation problems w/ db cache and Portal

I am still trying for a succesful installation of the 9ias software. I have followed all of the suggestions that have been posted and I am now getting TNS cannot resolve service name during the database cache part of the install. I checked services and it seems that this install didn't set up a TNSListener service for the 9iSuites home? I set the oracle_sid = icache as it instructs in the appendix, set the o7_dictionary_accessibility = true, and renamed the spfile to a .txt file so Oracle wouldn't find it. Subsequent to the database cache errors, the Portal install can't find the database either. I'm frustrated because I had the server up and running succesfully with an 8.1.7 db and I'm trying to switch to 9iDB. Any help would be greatly appreciated! My boss is getting a little impatient.
Thanks.

Mark,
I was succesful on my 4th try. This is what I did differently and I'm not sure what triggered success.(a preface: database cache was not succesful but portal was). After install of db I followed these suggestions before install of 9ias(plus others offered by Tao Fan in a previous post:
in the init.ora file:
set o7_dictionary_accessibility=true(this is an o, not 0)
comment out the 'dispatchers' line.
rename the spfile in the <oracleHome>\database directory(i changed mine to xspfile.txt). Make sure you restart the db after any changes to the init.ora file. Set all oracle services to manual and disable the http server. Stop all services.
Start your install. Mine hung at 100% complete with a command window open. Before I closed the command window I started the database service but not the listener. The install proceeded to fail during the db cache and portal install. I exited out of the install, started the dbTNSlistener, and any iSuitesagent services(not sure if this helped but I'm happy now!)Then, I restarted the machine. Then start/programs/iSuites/portalConfigAssistant and it worked.
If none of this makes sense I can email you the documentation I kept while installing.

Installation problem on RHEL4 ..

Installation problem on RHEL4 (Red Hat Enterprise 4) i have
install start at unzip tar.gz and tar -xf .... now i have run
./installFMS it show
./fmsini: error while loading shared libraries: libstdc++.so.5:
cannot open shar
ed object file: No such file or directory
ERROR: Your are running the Macromedia Flash Media Server
installer
on the wrong platform.
it not support for fedora or anything else?
plz help....

would be nice if someone responded to this.... Macromedia
wouldn't have been this lax in giving a reply :) AND they keep up
with OS updates too :)

8.1.7 Installation Problem on Pentium IV Sony VAIO PCV-RX651 with XP Operating System

Have problem installing Oracle 8i Enterprise Edition on a SONY VAIO with XP Personal Edition. The "Explore CD" and "Browse Documents" buttons of the Oracle Universal Installer/Autorun responded but the "Install/DeInstall Products" button did not. Oracle 8i DB from the same CD was installed and ran just fine on a Pentium III Toshiba laptop with Win2000 ?! Please help.
Thanks.
CNguyen
[email protected]

================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY

Installation problems on Solaris 9

I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp/ttainst_1/ttapkg.15978/pkg>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

from the diagnostic details:
Architecture           spso0509
Host           SunOS e220r 5.9 Generic_117171-17 sun4u sparc SUNW,Ultra-60
Package           Tarantella Secure Global Desktop Enterprise Edition for
SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Andrew
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Hangul
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Platform
Identity Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Security
Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Windows
Connectivity Pack for SPARC Solaris 2.8+ (4.10.903)
Bill Weir wrote:
Gavin,
Glad you're sorted. Can you confirm that it is 4.10.903 you are using
(not 4.00.903)? I'm concerned if this installation problem is still
present in the later version.
Bill
Gavin Westermann wrote on 31/08/2005 05:00:
Bill - that seems to have done the trick! the installation is now running.
Thanks so much for this.I am running a pair of Sun Ray 170's on my desk
here at home mated to an E220R. I am hoping to use Tarantella to be able
to access and run apps on a win3k server in the same rack.
Gavin
Bill Weir wrote:
Gavin,
This looks like a known problem with TTA 4.00.903 and some Solaris
patches which were distributed at about the same time. However, you say
you're using 4.10.903, and as far as I know the problem should be fixed
in that version.
You could try the workaround described in
http://www.tarantella.com/documentation/sgd/ee/4.0/install.html - search
for "tta_pkgadd" on that page and follow the instructions given there.
Regards,
Bill Weir, Sun Microsystems Inc.
Gavin Westermann wrote on 30/08/2005 05:06:
I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

Photoshop Elements 12 Installation Problems

Photoshop Elements 12 installs fine on a Windows XPSP3 platform (from C:\Documents and Settings\UserName\Desktop\Adobe Photoshop Elements 12).
On a Windows 7 SP1 platform C:\Users\....\Desktop\Adobe Photoshop Elements 12, but will not run
Error 1000 Application error caused by PhotoshopElementsEditor.exe followed by
Error: 1005 (100)
Description: Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Photoshop Elements 12 Editor because of this error.
The same source installation file was used in bith installs.

Install Using Compatibility Mode
http://social.technet.microsoft.com/Forums/windows/en-US/cdd894f8-1ee2-43e5-952b-d04c25779 a7f/how-to-install-a-software-application-using-compatibility-mode?forum=w7itproappcompat

Problem install 9iAS -

Hi All,
I am trying to install 9iAS (9.0.3) on my win2k Pro machine - and got weird problem.
First time I installed, everything went ok and worked fine. - However, since I have Oracle8i installed before and somehow Toad was screwed after 9iAS installation, I de-installed 9iAS (using Universal Installer come with 9iAS CD)
Weird problem happens ever since - it always pop up error (at 30% of "Setting up Install Types" bar):
All Oracle9iAS installations on a host must be installed by the same operating system user. The initial Oracle9iAS installed at ... was installed by a different operating system user. .....
The problem is that I definetely used same user name (indeed, besides admin, I am the only user who can login to this machine)
Any suggestions will be appreciated!
Warren

I cleaned registy many times using regedit (deleted anything related to 9i)- no use
I have 8.1.7 installed, and when install 9ias, error message says there's a previous 9i installation at my 8.1.7 directory (C drive) by different user - not make sense
because (1) the first time I install 9i, I put 9ihome in D drive. (2) I install 8.1.7 using same username
The only thing changed is the user password to login to my computer. It's really weird.

Sun, take responsibility for appserver7 installation problems!

*** First set of problems...
I'm having installation problems on both Solaris 8, (Ultra 480, 1GB RAM, latest recommended patches) and a Windows 2000 Server with SP2 (1GHz P4, 512MB RAM).
I chose default installation directory and then the install
complains that Pointbase 4.2 should be installed into the
same directory etc. Cannot unselect the Sample apps and
Pointbase options.
*** Second problem...
I have an instance previously installed on Windows 2000
Professional with SP2.(1GHz PIII, 512MB RAM, 5GB space)
When i start application server 7.0 , then i get the following
message:
Could not start the instance: domain1:admin-server
Server failed to start:abnormal subprocess termination
Could not start the instance: domain1:server1
Server failed to start: abnormal subprocess termination
Could not start one or more instances in the domain:domain1
Could not start one or more domains
Press any key to continue ...

When you say that you choose the default installation directory and then the installer complained about Pointbase, what platform where you using? Had you already attempted installs in the past or uninstallations that did not complete properly?
For your second issue, did you happen to change the host name of your machine? Try cranking up the log level (edit server.xml) to see what's causing the instances to fail on startup. Did the application ever start up after install? What things did you do just prior to the server exhibiting this behaviour?

Installation problem on Intel

I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..

I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Installation Problem on Win8

Hello all
I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
Thank you guys for your support.
Installation Logs:
java_install.log - Pastebin.com
java_install_reg.log - Pastebin.com
JavaDeployReg.log - Pastebin.com

Hi people!
I have two problems with nokia suite...
first of all I can't install it at my windows 8.1, I receive the message attached...
Second,
in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
can somebody help me?
Attachments:
mokiasuit.png ‏13 KB

Xp_logininfo Installation problem

Hello gurus,
I'm facing the same problem as described in this link:
Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
the error I get is similiar:
<i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
but I just don't get how to solve it.
-I've tried to use the profiler but didn't find any information that will help me to solve.
-One of the guys wrote to add "logon rights" to the user ... what does it mean ?
Please advice,
Dimitry Haritonov

Hi sven,
Thank you very much for the quick and direct answer.
The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
Best regards,
Dimitry Haritonov

Installation problem on 9iAS on Lunix platform

Similar Messages

Maybe you are looking for